1
00:00:00,600 --> 00:00:06,960
The quality of service and guide is a really good guide to use for both study as well as for real world

2
00:00:06,960 --> 00:00:08,070
applications.

3
00:00:08,610 --> 00:00:12,510
It has, as an example, recommendations for classification and marketing.

4
00:00:12,990 --> 00:00:21,450
So as an example, voice traffic should use an IP precedence of five a per hop behaviour or FB, which

5
00:00:21,450 --> 00:00:30,990
is similar in concept to DHCP of F and DHCP of 46 a per hop behaviour essentially is a class.

6
00:00:30,990 --> 00:00:38,800
So what class of traffic will the traffic be put into and how will it be treated on a per hop behaviour?

7
00:00:38,850 --> 00:00:44,940
In other words, by each node in a network, how will your routers and switches treat the traffic?

8
00:00:45,120 --> 00:00:49,020
The physical marking would be 46, so that's the DHCP.

9
00:00:49,080 --> 00:00:56,340
And at layer two, your costs in your editor, the one Q header would be set to five and the MPLS experimental

10
00:00:56,370 --> 00:00:58,410
bits will be set to five as well.

11
00:00:58,620 --> 00:00:59,820
Call signalling.

12
00:00:59,820 --> 00:01:07,590
So a protocol such as CIP or HDD three may use an IP precedence of three per hop behaviour would be

13
00:01:07,590 --> 00:01:13,380
either a F 31 or KES three and the DHCP would be either 26 or 24.

14
00:01:13,410 --> 00:01:21,870
That's because there are differences in the way that phones mark traffic depending on how old they are.

15
00:01:24,050 --> 00:01:32,420
Bulk data, as an example, would have an IP precedence of one per hop behavior of AF 11, DCP of ten

16
00:01:32,420 --> 00:01:35,570
and a cost or experimental value of one.

17
00:01:37,340 --> 00:01:43,520
There are different ways to create classes depending on how close you are to the edge of the network.

18
00:01:43,970 --> 00:01:46,550
If you're at the edge of the network, in other words.

19
00:01:47,570 --> 00:01:51,710
You write here where your pieces and phones are connecting to the network.

20
00:01:52,850 --> 00:01:59,420
You may use multiple classes such as the quality of service baseline model, but in a lot of cases as

21
00:01:59,420 --> 00:02:01,920
you get closer and closer to the core.

22
00:02:01,970 --> 00:02:08,720
So in a core MPLS network as an example, they'll end up only having four or five classes.

23
00:02:08,990 --> 00:02:15,500
They will aggregate traffic classes into fewer classes as you get closer to the core of the network.