1

00:00:05,290 --> 00:00:07,720

DHC, Poppy, hello, everyone.



2

00:00:07,940 --> 00:00:14,230

Unlike others, can basically be assigned to a device or network in two ways.



3

00:00:14,380 --> 00:00:22,300

The first way is to manually configure IP address, which is just the static way of doing it in the



4

00:00:22,300 --> 00:00:30,100

second way is to do it dynamically where the device operating system is automatically configuring an



5

00:00:30,100 --> 00:00:30,910

IP address.



6

00:00:31,160 --> 00:00:37,180

And this tool that is basically doing this is called the T h.



7

00:00:38,140 --> 00:00:45,580

So when you use the DCP, as soon as device first connects to a network, it is automatically allocated



8

00:00:45,910 --> 00:00:53,890

IP address by the DCP Service in this IP address is taken from predefined pool.



9

00:00:54,140 --> 00:01:01,300

So usually the DSP is setup by the network, but the network administrator.



10

00:01:01,510 --> 00:01:04,300

So you need to have that right in order to set up this.



11

00:01:04,780 --> 00:01:13,660

So in order to set up the DCP would acquire our DCP server that needs appropriate parameters in order



12

00:01:13,870 --> 00:01:16,810

to configure the device in the proposed network.



13

00:01:17,740 --> 00:01:24,200

So we need parameters such as the range of the pool, the available IP addresses and so on.



14

00:01:24,580 --> 00:01:33,070

So basically, when a computer in a network want to obtain a valid configuration, usually when we start



15

00:01:33,070 --> 00:01:39,550

the machine, it issues the DGP service discover request, which it generates on its site.



16

00:01:39,880 --> 00:01:44,920

An IP address in this is then should be broadcast Puckett's.



17

00:01:45,040 --> 00:01:53,110

It reaches the GHC server and once the negotiation is established, will resulting in an IP address



18

00:01:53,110 --> 00:01:54,740

assigned to the device from the port.



19

00:01:54,940 --> 00:02:02,410

So it is very important to understand that in order to obtain the DCP, we do not require any network



20

00:02:02,410 --> 00:02:03,940

interface configured.



21

00:02:04,480 --> 00:02:11,960

Also, the DCP should be on at the same time or different time from the client or the server.



22

00:02:12,160 --> 00:02:21,790

So when the server receives a request for a device, the Discover service obtains the Mac address of



23

00:02:21,790 --> 00:02:25,620

the client and assigns an IP address to it.



24

00:02:25,750 --> 00:02:32,910

So the DCP basically assigns an IP address to the client for just a certain amount of time.



25

00:02:33,040 --> 00:02:42,730

And the aim of the client is to do its job until it is time passes or to renew the concession before



26

00:02:42,730 --> 00:02:44,360

the time reaches its limit.



27

00:02:44,470 --> 00:02:48,100

So that was everything I want to share with you about the DCP.



28

00:02:48,310 --> 00:02:52,630

It is basically a service that assigns automatically IP addresses stakeholders clear.



29

00:02:52,840 --> 00:02:56,410

Thank you very much for watching and I will see you in our next video.