1
00:00:01,080 --> 00:00:09,210
Now that we flashed the cubes image to a USB stick we can't connect this USB stick to a computer and

2
00:00:09,270 --> 00:00:13,470
install cubes as the main operating system on that computer.

3
00:00:13,470 --> 00:00:22,470
Or we can use another USB stick flash cubes to it and then use cubes as alive operating system using

4
00:00:22,530 --> 00:00:24,300
this second USB stick.

5
00:00:24,300 --> 00:00:30,070
So we'll be able to connect it to any computer we want regardless of what operating system it runs.

6
00:00:30,120 --> 00:00:36,910
And then we'll be able to use cubes and when we're done the computer that we used will be back to using

7
00:00:36,960 --> 00:00:40,130
its default operating system now.

8
00:00:40,160 --> 00:00:44,480
As I mentioned earlier cubes is a complex operating system.

9
00:00:44,660 --> 00:00:52,070
So unlikely tells us B which we connect to pretty much any computer and put into tales in order to wood

10
00:00:52,100 --> 00:00:53,080
cubes image.

11
00:00:53,180 --> 00:01:00,020
We have to modify the BIOS settings of the computer that we're going to use entering the BIOS settings

12
00:01:00,020 --> 00:01:04,600
varies depending on the computer that you have and depending on the motherboard.

13
00:01:04,880 --> 00:01:11,000
On the right here I have a table of the most common computers along with the buttons that you need to

14
00:01:11,000 --> 00:01:14,360
press in order to enter the BIOS settings.

15
00:01:14,420 --> 00:01:21,080
So as soon as you turn on the computer or restarted you'll need to press the button relevant to your

16
00:01:21,080 --> 00:01:25,130
computer in here in order to enter the BIOS settings.

17
00:01:25,250 --> 00:01:29,000
Once you're there you want to make sure you enable virtualization.

18
00:01:29,270 --> 00:01:34,670
In most cases you'll also need to disable secure booth and set the booth to legacy.

19
00:01:34,670 --> 00:01:40,050
This is optional but to my experience I had to do that in a number of laptops.

20
00:01:40,160 --> 00:01:47,510
Then you can finally configure your booth order to Booth from USP first or you can just restart and

21
00:01:47,570 --> 00:01:53,460
enter the booth menu like I showed you before with tails and choose to Booth from USP.

22
00:01:53,510 --> 00:01:58,670
So let me show you how to do this on aerial computer OK.

23
00:01:58,690 --> 00:02:05,420
So this is a Lenovo computer therefore based on the table that I just showed you I will need to press

24
00:02:05,480 --> 00:02:12,460
F to as soon as I turn on this computer in order to enter into its bio settings.

25
00:02:12,590 --> 00:02:18,230
So first I'm going to hit the power button to turn it on and as it's being turned on I'm going to keep

26
00:02:18,230 --> 00:02:26,270
pressing F2 to enter the settings and perfect as you can see I am in the BIOS settings right now.

27
00:02:26,270 --> 00:02:33,350
Now keep in mind depending on your computer the settings might look different than what I have in here.

28
00:02:33,350 --> 00:02:38,570
The main thing that you want to keep in mind is to modify the four settings that I mentioned earlier

29
00:02:38,840 --> 00:02:47,030
enabled virtualization disables secure would enable legacy mode and said it's too good from USP first.

30
00:02:47,030 --> 00:02:52,310
Like I said you might find these settings under different categories or under different windows but

31
00:02:52,310 --> 00:02:54,970
just make sure you modify the settings.

32
00:02:55,610 --> 00:03:00,530
So as you can see for me the first window that I see is just an information window.

33
00:03:00,560 --> 00:03:03,710
It doesn't really allow me to modify anything.

34
00:03:03,740 --> 00:03:08,120
Now you can use the keyboard to navigate between these windows or these tabs.

35
00:03:08,120 --> 00:03:15,110
So I'm going to press the right arrow to go to the configuration window and in here the only thing that

36
00:03:15,110 --> 00:03:19,490
I want to modify is Intel virtualization technology.

37
00:03:19,490 --> 00:03:25,940
So I'm going to use the down arrow to navigate to that and I'm going to hit enter to change the setting

38
00:03:26,120 --> 00:03:30,700
press down to set it to enabled and hit enter again to select it.

39
00:03:30,710 --> 00:03:35,330
Now if you're not sure about how to use this interface because like I said you might actually get a

40
00:03:35,330 --> 00:03:36,960
different interface.

41
00:03:37,010 --> 00:03:42,530
Keep an eye on the instructions that you see at the bottom as they tell you exactly how to navigate

42
00:03:42,560 --> 00:03:44,840
and modify the settings.

43
00:03:44,870 --> 00:03:47,020
Now I'm done with the configuration window.

44
00:03:47,060 --> 00:03:53,960
I'm going to press the right arrow again to go into the security tab and here again we have another

45
00:03:53,960 --> 00:03:56,210
option that we want to change which is secure.

46
00:03:56,210 --> 00:03:56,810
Good.

47
00:03:56,810 --> 00:04:03,830
And like I said this is optional but in my experience this can't interfere with booting into cubes and

48
00:04:03,830 --> 00:04:05,990
prevents you from installing cubes.

49
00:04:05,990 --> 00:04:09,330
Therefore I'm going to scroll down to secure a booth again.

50
00:04:09,480 --> 00:04:15,360
Hit enter to change the settings change it to disabled and hit enter again.

51
00:04:15,790 --> 00:04:17,110
We're done with this window no.

52
00:04:17,160 --> 00:04:19,810
These are two settings done we have two to go.

53
00:04:19,900 --> 00:04:26,760
So we're going to press right to go to the good window and in here as you can see the first option is

54
00:04:26,760 --> 00:04:27,740
the booth mode.

55
00:04:27,810 --> 00:04:30,900
We want to change that from you I to legacy.

56
00:04:30,900 --> 00:04:37,080
So again I'm going to hit enter and select legacy you might not get this but as you can see now I got

57
00:04:37,080 --> 00:04:38,250
an extra option here.

58
00:04:38,250 --> 00:04:41,490
The second one the with priority it said to you.

59
00:04:41,490 --> 00:04:46,760
Efi first again I'm going to hit enter and change that legacy first.

60
00:04:46,830 --> 00:04:49,080
And finally you don't even have to do this.

61
00:04:49,170 --> 00:04:53,540
I'm going to change the boot order so that it routes from you SB first.

62
00:04:53,700 --> 00:04:59,070
You don't have to do this because you can exit this and just manually choose to boot from USP.

63
00:04:59,220 --> 00:05:05,160
I'm just going to do it here so that when I restart I won't even have to enter the boot menu so I'm

64
00:05:05,160 --> 00:05:10,700
just gonna scroll down to the USP and I'll bring it all the way up again.

65
00:05:10,710 --> 00:05:16,320
I'm looking at the bottom of the bios screen to see how I can move items up and down.

66
00:05:16,350 --> 00:05:21,750
So based on that screen is telling me that I can use a five and six to do so

67
00:05:26,590 --> 00:05:27,110
OK.

68
00:05:27,140 --> 00:05:32,330
Now we're done with all the settings so enabled virtualization with disabled secure boot.

69
00:05:32,450 --> 00:05:39,360
We disabled you EFI and we said the boot to legacy and we set it to boot from U.S. B first.

70
00:05:39,410 --> 00:05:40,730
We're done with everything.

71
00:05:40,730 --> 00:05:46,610
We're going to go to the exit so again I'm going to press the right arrow again and I'm going to select

72
00:05:46,610 --> 00:05:52,330
the first option exit saving settings that's going to ask me Do I really want to do this.

73
00:05:52,370 --> 00:05:54,380
I'm going to say yes.

74
00:05:54,380 --> 00:05:59,180
And before hit and enter because once I hit enter it's going to restart my computer.

75
00:05:59,180 --> 00:06:07,810
I'm going to connect the new SB device that I flashed the cubes iso image to I'm also going to connect

76
00:06:07,900 --> 00:06:09,940
a second USB device.

77
00:06:09,940 --> 00:06:15,370
This is the one that I showed you in green and this is the one that I'm going to install cubes to.

78
00:06:15,370 --> 00:06:19,460
So I'm not going to install it as a main operating system on this computer.

79
00:06:19,480 --> 00:06:26,500
I will install it just to this USB stick so that I can use the second USB stick to run cubes on any

80
00:06:26,500 --> 00:06:28,920
computer that can support cubes.

81
00:06:28,960 --> 00:06:35,410
So I'm going to use it as a live operating system similar to the way that we were using Intel's and

82
00:06:35,410 --> 00:06:37,040
now that we are ready to restart.

83
00:06:37,060 --> 00:06:42,800
I'm going to hit enter to save the changes and restart the computer now.

84
00:06:42,820 --> 00:06:49,930
As you can see it automatically booted using the USB stick into the cubes image that we flashed to our

85
00:06:49,930 --> 00:06:50,830
USB stick.

86
00:06:51,310 --> 00:06:57,120
If this didn't work for you if it did it would automatically into this then enter your boot settings

87
00:06:57,310 --> 00:07:04,060
as the system is starting similar to what we did with tails and force it to boot from the USB stick

88
00:07:04,300 --> 00:07:07,960
that we flashed cubes to.

89
00:07:07,960 --> 00:07:13,510
So now we're ready to go ahead and install cubes and I'll show you how to do that.

90
00:07:13,540 --> 00:07:15,520
In details in the next lecture.
