1
00:00:00,850 --> 00:00:07,620
OK so now that we configured our buyers properly to boot into the USB stick that has the cubes image

2
00:00:08,010 --> 00:00:14,380
as you can see we managed to successfully boot into cubes and we have the installer right here.

3
00:00:14,490 --> 00:00:17,700
So as you can see right now we have two options.

4
00:00:17,760 --> 00:00:24,480
We can select the first option to go ahead and install cubes straight away or we can go with the second

5
00:00:24,480 --> 00:00:31,820
option to test the hardware that we have first and then install cubes if everything is fine.

6
00:00:31,890 --> 00:00:37,320
So I'm going to go with the second option so I'm gonna press the down arrow and hit enter to first test

7
00:00:37,320 --> 00:00:38,550
the hardware that I have.

8
00:00:38,670 --> 00:00:44,430
And if everything is fine we will go ahead and install cubes perfect.

9
00:00:44,440 --> 00:00:49,100
So we have the installer here which means that we passed all the tests so far.

10
00:00:49,120 --> 00:00:52,150
Now the next steps are actually going to be pretty simple.

11
00:00:52,150 --> 00:00:55,850
First it's asking us for the language I'm going to keep it at English.

12
00:00:55,900 --> 00:00:58,440
You can change it to whatever language you want.

13
00:00:58,480 --> 00:01:03,760
So I'm just going to click on continue here on the bottom right next.

14
00:01:03,830 --> 00:01:07,620
We have a window that allow us to change a number of settings.

15
00:01:07,700 --> 00:01:11,180
You can change the keyboard the time the language.

16
00:01:11,360 --> 00:01:13,900
I'm actually going to keep everything the same.

17
00:01:13,910 --> 00:01:21,410
The only thing that I want to change is under the youth system category in there which is the installation

18
00:01:21,410 --> 00:01:23,240
destination.

19
00:01:23,240 --> 00:01:27,610
This is the location where Cuba is going to be installed too.

20
00:01:27,620 --> 00:01:33,420
And this is the only difference that I've always been talking about between installing cubes to us.

21
00:01:33,440 --> 00:01:38,480
I mean operating system or installing it on a USB stick.

22
00:01:38,480 --> 00:01:44,840
So we're going to click on this to change the setting and this will show us a window that list all the

23
00:01:44,840 --> 00:01:48,880
storage devices connected to this computer.

24
00:01:49,000 --> 00:01:55,150
So the first storage device that I have there on the left you can see the size of it is 9 3 1 gigabytes.

25
00:01:55,180 --> 00:01:59,140
This is the built in hard drive inside my computer.

26
00:01:59,170 --> 00:02:05,560
So if you want to install tales on this hard drive as a main operating system on this computer you'll

27
00:02:05,560 --> 00:02:08,350
need to select this hard drive.

28
00:02:08,350 --> 00:02:14,920
Alternatively if you want to install cubes on a USB stick and then use it as a live operating system

29
00:02:14,950 --> 00:02:17,410
similar to what we were doing with tails.

30
00:02:17,470 --> 00:02:22,900
So you'll be able to connect it to any computer that supports cubes and use it on that computer.

31
00:02:22,900 --> 00:02:28,240
And then when you remove it the computer will be back to using its default operating system.

32
00:02:28,240 --> 00:02:34,430
If you want to do this then Kinect a second USB device to this computer the minimum size of this U.S.

33
00:02:34,430 --> 00:02:37,110
V device should be 32 gigabytes.

34
00:02:37,180 --> 00:02:42,390
As you can see I have one connected to it and it's size is actually 57 gigabytes.

35
00:02:42,400 --> 00:02:44,050
So it's over the minimum.

36
00:02:44,080 --> 00:02:49,930
So all I'm going to do right now is literally just click on this storage device that I want to install

37
00:02:49,930 --> 00:02:54,100
cubes to which is my USP device right here.

38
00:02:54,100 --> 00:02:59,230
As you can see it's 26th right now so it's telling me that this is where cubes is going to be installed

39
00:02:59,230 --> 00:02:59,900
too.

40
00:02:59,950 --> 00:03:06,040
And again keep in mind that when you select a device in here everything's stored on this storage device

41
00:03:06,040 --> 00:03:09,270
will be removed and cubes will be installed there.

42
00:03:09,280 --> 00:03:14,980
So make sure you don't have anything important to you because it will be erased.

43
00:03:14,980 --> 00:03:22,420
So I'm going to click on done there on the top left now cubes by default will encrypt the storage device

44
00:03:22,450 --> 00:03:23,170
that you pick.

45
00:03:23,650 --> 00:03:29,350
So right now it's asking me for a passphrase to use for this encryption we'll be using this password

46
00:03:29,350 --> 00:03:31,720
to unlock the storage device that we picked.

47
00:03:31,720 --> 00:03:34,180
In the future when we want to use cubes.

48
00:03:35,200 --> 00:03:43,180
So I'm going to put my password in here and I'm going to click on Save passphrase now.

49
00:03:43,190 --> 00:03:49,940
In general you should go back to the main menu at this stage in my case the US b device that I picked

50
00:03:50,150 --> 00:03:52,190
is not formatted properly.

51
00:03:52,190 --> 00:03:55,590
I intentionally did this just in case you faced this issue.

52
00:03:55,610 --> 00:03:58,700
So if you're back at the main window this is perfect.

53
00:03:58,700 --> 00:04:03,410
If you've got the same warnings that I have right here then follow what I'm going to do in order to

54
00:04:03,410 --> 00:04:07,870
properly format this storage device and install cubes on it.

55
00:04:07,910 --> 00:04:12,190
So we're going to click on reclaim space here at the bottom right.

56
00:04:12,230 --> 00:04:20,140
We're going to click on delete all and we're going to click on reclaim space and that's it.

57
00:04:20,140 --> 00:04:21,820
We're back at the main window.

58
00:04:21,940 --> 00:04:23,760
And we're good to go.

59
00:04:23,860 --> 00:04:28,570
So we're going to click on begin installation on the bottom right here.

60
00:04:28,630 --> 00:04:32,140
Now like I said this will take some time so be patient with it.

61
00:04:32,170 --> 00:04:38,560
It will even take longer time if you're installing it to a USB stick like I'm doing right now.

62
00:04:38,560 --> 00:04:44,740
So I'm going to pause the video and will resume once the installation is finished.

63
00:04:45,060 --> 00:04:47,770
So now the installation is complete.

64
00:04:47,940 --> 00:04:54,800
We will need to create a user in order to boot into cubes using the USB stick.

65
00:04:54,840 --> 00:04:58,730
So I'm going to click here on user creation.

66
00:04:59,110 --> 00:05:04,010
I'm going to set a user name and then I'm going to set a password.

67
00:05:04,320 --> 00:05:05,630
I'm going to click on done

68
00:05:08,750 --> 00:05:14,810
and right now I'm going to click on finished configuration on the bottom right OK.

69
00:05:14,840 --> 00:05:17,360
Now the configuration is complete.

70
00:05:17,360 --> 00:05:22,940
And as you can see here at the bottom right I can click on reboot to reap with the computer.

71
00:05:23,120 --> 00:05:31,010
And then if I keep the second USB stick connected to the computer it'll automatically put into cubes

72
00:05:31,580 --> 00:05:38,390
because I change the boot order or if I disconnect all the USPS takes a toll booth into the default

73
00:05:38,450 --> 00:05:42,200
operating system that this computer runs on.

74
00:05:42,600 --> 00:05:50,200
So I'm going to click already would and as soon as the computer restarts I will disconnect the first

75
00:05:50,260 --> 00:05:51,400
USB stick.

76
00:05:51,400 --> 00:05:59,950
This one this is the one that I used to install the cubes image and I kept the one the second one the

77
00:05:59,950 --> 00:06:06,450
bigger one connected to the computer and order to good into the cubes operating system.

78
00:06:06,520 --> 00:06:10,450
And as you can see it's automatically booting into cubes.

79
00:06:11,500 --> 00:06:15,340
So it's very important to distinguish between the two USP sticks.

80
00:06:15,460 --> 00:06:22,090
We use one of them in order to install cubes either to the built in harddrive as a main operating system

81
00:06:22,330 --> 00:06:24,800
or to another USB stick.

82
00:06:24,910 --> 00:06:31,720
And then if we installed it on another USB stick the second one will be the one that we use when we

83
00:06:31,720 --> 00:06:36,340
want to boot into the actual operating system.

84
00:06:36,340 --> 00:06:39,460
Right now it's booting into the operating system.

85
00:06:39,460 --> 00:06:44,990
Be patient with it and as it's booting as you can see it's asking me for the disk password.

86
00:06:45,040 --> 00:06:53,410
This is the encryption passphrase that we chose when we installed cubes so I'm going to enter it and

87
00:06:53,410 --> 00:06:59,860
hit enter and just wait for the operating system to start.

88
00:07:00,090 --> 00:07:04,450
Now we're going to click on cubes or ask to set some final options.

89
00:07:04,590 --> 00:07:07,980
I'm going to keep everything to the default settings.

90
00:07:07,980 --> 00:07:13,830
You might want to enable this option if you want to download updates over the network.

91
00:07:13,920 --> 00:07:19,470
I'm going to keep it unchecked because that'll slow it down download an update is usually not banned

92
00:07:19,710 --> 00:07:22,820
so you can just keep this unchecked.

93
00:07:22,890 --> 00:07:30,270
So I'm just going to click on done and wait for cubes to configure the virtual machines needed to run

94
00:07:30,330 --> 00:07:37,040
the whole operating system OK so the configuration is finally complete.

95
00:07:37,040 --> 00:07:43,200
Now this did take some time again and it actually seemed like it froze at some stage there.

96
00:07:43,250 --> 00:07:46,520
So you will get this during the installation process.

97
00:07:46,640 --> 00:07:54,080
It seems like it's stuck at a certain point as long as the mouse is moving then don't turn off the computer

98
00:07:54,110 --> 00:07:55,400
just give it its time.

99
00:07:55,400 --> 00:07:56,930
Be patient with it.

100
00:07:56,990 --> 00:07:59,170
It should finish the installation.

101
00:07:59,360 --> 00:08:01,010
So now everything is done.

102
00:08:01,010 --> 00:08:04,460
I'm going to click on finished configuration here at the bottom right

103
00:08:07,420 --> 00:08:07,940
and perfect.

104
00:08:07,940 --> 00:08:10,930
Now we have the normal log in screen for cubes.

105
00:08:10,970 --> 00:08:16,760
So now in the future all we have to do is connect the second USB stick to the computer that you want

106
00:08:16,760 --> 00:08:22,570
to put cubes from Booth from us B and you will get to the screen.

107
00:08:22,580 --> 00:08:25,770
You want go through the configuration every time.

108
00:08:25,880 --> 00:08:31,250
So put the password that we said here enter and perfect.

109
00:08:31,250 --> 00:08:35,330
Now we are inside the cube desktop.

110
00:08:35,390 --> 00:08:40,410
Now you can see this is very similar to basic Linux interface.

111
00:08:40,520 --> 00:08:45,550
If you have some experience with that you'll be able to easily navigate this if you don't.

112
00:08:45,590 --> 00:08:46,550
Don't worry about it.

113
00:08:46,550 --> 00:08:49,980
We'll talk about it in details in future lectures.

114
00:08:50,060 --> 00:08:57,470
But right now we finished installing cubes as a life operating system to a USB stick.

115
00:08:57,530 --> 00:09:05,420
Now to turn it off we're going to go to the top right click on shut down and click on shut down again.

116
00:09:08,050 --> 00:09:09,090
Now just to show you.

117
00:09:09,100 --> 00:09:14,270
So if I disconnect my second USB stick this one right there.

118
00:09:14,380 --> 00:09:17,820
This is the one that we installed cubes to.

119
00:09:17,860 --> 00:09:20,590
So if I disconnected and start my computer

120
00:09:23,190 --> 00:09:29,580
you'll see that it's going to boot into windows into the operating system that it's used to run before

121
00:09:29,580 --> 00:09:30,810
by default.

122
00:09:30,810 --> 00:09:34,770
So this is the whole point of installing cubes to a USB stick.

123
00:09:34,830 --> 00:09:41,130
We'll be able to connect it to any computer that can run cubes use cubes on that computer and we're.

124
00:09:41,250 --> 00:09:47,310
And when we're done the computer will be back to its original state and we'll be able to take this USB

125
00:09:47,370 --> 00:09:50,310
stick with us anywhere we want and use cubes from it.
