WEBVTT

00:00.600 --> 00:10.740
Let's understand the pie chum installation so caught up with the DXi costs run.

00:10.780 --> 00:13.010
So we are installing by Chaum.

00:13.030 --> 00:14.330
Yes.

00:15.280 --> 00:16.620
Community Edition.

00:17.660 --> 00:18.730
Cool.

00:18.780 --> 00:19.940
This is fine.

00:22.790 --> 00:25.010
So we going to have a 64 bed

00:30.120 --> 00:31.130
X..

00:31.480 --> 00:32.110
OK.

00:32.160 --> 00:32.780
Great.

00:33.830 --> 00:35.140
Create the program shot.

00:35.140 --> 00:35.840
Good.

00:35.910 --> 00:37.050
All right.

00:37.180 --> 00:37.910
That's OK.

00:38.100 --> 00:39.520
Install.

00:39.740 --> 00:46.950
So we have our installation of Chomper media happening up at the same time.

00:47.150 --> 00:48.800
I have seen time.

00:48.800 --> 00:52.300
We are also installing Anaconda.

00:52.700 --> 00:59.210
So these are two things which are going on together which you will have locus to how to use both of

00:59.260 --> 01:01.910
them OK.

01:02.260 --> 01:03.550
Once this is done

01:06.410 --> 01:11.770
they need shields set up this so we can run the pipe shop community edition.

01:11.770 --> 01:13.160
Finish it up.

01:13.430 --> 01:20.510
When that is done through open up by Chupke movie edition right at the same time Anaconda is also done

01:20.900 --> 01:23.290
Anaconda tree which.

01:23.680 --> 01:24.370
OK.

01:24.650 --> 01:32.540
So frustum location ontrack fuller solution the previous version or something like that.

01:33.620 --> 01:36.020
OK finish this up.

01:36.110 --> 01:38.540
This is also done ship.

01:38.870 --> 01:42.360
Can Anaconda OK.

01:42.460 --> 01:52.160
We have quite Chung here which will customize by chum skipper meaning set the faults of his about by

01:52.200 --> 01:56.150
Chomper now we can configure it right.

01:56.180 --> 02:06.040
So we have settings which Reagan come to go in the settings we need to SIGO project into Pradel which

02:06.040 --> 02:08.180
is going to be there what do we have

02:14.390 --> 02:14.920
right.

02:15.140 --> 02:16.580
Well we'll come to that in a minute.

02:17.620 --> 02:26.470
OK so OK and let's say so we can create a new project so we can create a new project and just name it

02:26.470 --> 02:27.980
as.

02:28.000 --> 02:29.660
So it's going to be there.

02:29.660 --> 02:38.570
And in this particular location let me just put it up on the next stop for me out here.

02:39.760 --> 02:40.350
OK.

02:43.820 --> 02:51.800
OK for now I'll put it up in doc order let me just say it was fine I'll just rename it and say advanced

02:52.640 --> 03:03.180
Titan for the Create suit you create an environment KMI seem time.

03:03.180 --> 03:06.740
My anaconda is stalled.

03:06.750 --> 03:08.670
You can also check Anaconda.

03:08.670 --> 03:14.080
You can just write it down and then you will see the Anaconda prom then the Anna gone a navigator navigator

03:14.190 --> 03:17.140
something make a g y which she can use for Anaconda.

03:17.370 --> 03:20.760
Or you can just use the Anaconda from down there.

03:20.760 --> 03:25.890
Another thing that you can just open up is the chip in a notebook so you have the Jupiter a notebook

03:26.490 --> 03:27.750
you can just open that up.

03:28.110 --> 03:35.070
And so we are just getting both of these opened up for now the Jupiter notebook and the chum.

03:35.070 --> 03:37.980
OK so we don't need this for now.

03:39.120 --> 03:40.620
OK.

03:40.840 --> 03:49.800
It's going to be take some time for the for the new shilled set up out here in my chum.

03:50.020 --> 03:53.580
Well chapiter not book but it's open up here.

03:54.030 --> 03:55.430
Cool.

03:55.440 --> 03:55.850
All right.

03:55.860 --> 03:59.860
So this has been a good book which has opened up for us.

03:59.880 --> 04:06.240
OK so before we go into pie charm we can just have a look at Jupiter notebook and then then go on there.

04:06.540 --> 04:07.380
OK.

04:07.860 --> 04:11.500
So in a notebook it says OK ready you want to start up.

04:11.730 --> 04:16.100
That's where you can you can go there in that particular location.

04:16.280 --> 04:16.610
OK.

04:16.620 --> 04:20.120
Let's go to the same location that we are having.

04:20.730 --> 04:30.230
You know having this thing that say that was quite Chaum somewhere see users recording quite some seems

04:30.240 --> 04:31.730
as recording by some project.

04:31.730 --> 04:36.100
So what I'm going to do is I'm going to upload it here I'm going to stop here see.

04:36.130 --> 04:36.850
Uses

04:44.530 --> 04:50.520
recording spike some products.

04:51.760 --> 04:53.140
So I opened that up.

04:54.460 --> 05:00.040
And advanced open OK.

05:08.470 --> 05:08.880
Oh.

05:09.090 --> 05:11.790
So that's where you do.

05:12.270 --> 05:12.580
OK.

05:12.600 --> 05:14.800
Or it's just you.

05:14.940 --> 05:18.530
So you have your right arm projects and you see that right.

05:18.540 --> 05:24.440
So this is where we're going to use this particular folder to save our new files in Jupiter notebook.

05:24.450 --> 05:30.100
Let me just write something new a new file just to understand how to open a notebook will work.

05:30.120 --> 05:34.060
Let's see a new file new pipe into the second.

05:34.260 --> 05:42.600
It will become a system and so we have our chip that are opened up once it is done all we have to do

05:42.600 --> 05:51.650
is let's say we need to write a simple program that say print hello world OK.

05:52.620 --> 05:57.130
Well this is one part of the program but I want to write another program.

05:57.130 --> 06:02.020
Let's see is equal to for being equal to 5.

06:02.120 --> 06:03.390
I want to print.

06:04.080 --> 06:07.840
I want to print be I want to see.

06:08.420 --> 06:11.920
So I have something else here so I want to print Hello world.

06:12.020 --> 06:12.970
I want to run this.

06:13.000 --> 06:14.600
But I don't want to run them together.

06:14.600 --> 06:15.770
I would run them separately.

06:15.770 --> 06:16.450
Can I do that.

06:16.460 --> 06:18.800
Yes I can click on this.

06:18.950 --> 06:22.330
And let's see run this hello world.

06:22.530 --> 06:31.070
Whereas in this case if I say run is equal to 4 equal fine print print it print 4 and 5.

06:31.370 --> 06:35.030
Now is this accessible from this particular code segment.

06:35.030 --> 06:36.910
Is it accessible in the bottom code segment.

06:36.920 --> 06:37.550
Let's see.

06:37.630 --> 06:37.980
A.

06:38.090 --> 06:42.320
Yes it is OK so you can have something like this.

06:42.380 --> 06:45.170
The because you can.

06:45.180 --> 06:52.410
So the advantage of using that to get a notebook is you can have multiple lines of code in one segment

06:52.920 --> 06:56.670
if you want to run all of them you can run all of them together if you don't want to run all of them

06:56.670 --> 06:57.860
you just want to run part of it.

06:57.900 --> 07:01.820
You can even run product which is going to be completely different.

07:01.830 --> 07:06.180
Secondly you can also it's just like a notebook.

07:06.240 --> 07:10.890
That's why it's called chip in a notebook where let's say I want to write something here I want to say

07:11.440 --> 07:17.990
OK this I want to see something like right here marked down in a month in your code to be written I

07:17.990 --> 07:32.620
want to say hi this is Chip a notebook and we're using it to document our to document our programs so

07:32.620 --> 07:35.310
we can just we can just write this pretty high.

07:35.650 --> 07:46.580
And let's say so I want to have a title Ozel that said I can put a hash and see you know advanced pikemen

07:47.210 --> 07:48.620
for IHT.

07:49.020 --> 07:51.460
All right so this particular thing I want to put it about.

07:51.630 --> 07:53.460
I can just push it out.

07:53.730 --> 07:54.910
And this is below.

07:55.200 --> 07:55.950
OK.

07:55.950 --> 08:02.250
Now all I need to do is I need to you know I can take all of them I can dig all of them together and

08:02.460 --> 08:08.700
run it out of you so when I run it and you see it's just like a notebook you have advanced fighting

08:08.700 --> 08:15.420
for the of Zyban or using document of programs you have our programmers in your and you have the output

08:15.440 --> 08:16.240
right now.

08:16.650 --> 08:24.120
This is as simple as using it in a notebook quite quite good though for packages or for using if you

08:24.120 --> 08:31.530
want to if you want to have things like you know putting them in folders and utilizing modules from

08:31.530 --> 08:33.320
different folders and stuff like that.

08:33.390 --> 08:40.710
We can use of course by chumped to duck to make our project well so you can say let's a new new pite

08:40.770 --> 08:41.550
file.

08:41.790 --> 08:43.790
OK so we're can see it here.

08:44.020 --> 08:44.680
OK.

08:44.880 --> 08:49.480
So let's say test it to append a test.

08:49.560 --> 08:50.040
Why.

08:50.250 --> 08:58.250
And all we can say is you know print the words of course we need to construct it.

08:58.440 --> 09:00.490
For now we need to concertgoer.

09:00.780 --> 09:03.450
Let's go back to Joe

09:06.190 --> 09:10.850
Fylde settings we need to go to the project interpreter.

09:11.060 --> 09:16.350
We can say is that licencee point say no Interbrand.

09:16.360 --> 09:17.100
All right.

09:17.120 --> 09:19.980
And 2.6 that's fine recordings.

09:19.980 --> 09:21.330
All right that's fine that's cool.

09:21.470 --> 09:22.100
OK.

09:22.100 --> 09:29.820
And let's see if we can run this office run run past.

09:30.320 --> 09:36.680
Hello rate so you can you can keep creating new files here.

09:36.960 --> 09:40.370
So you have all your files together in one document.

09:40.620 --> 09:51.950
Let's say taking input so we can take input from the user let's say input control a number of costs

09:51.980 --> 10:00.690
whatever input you take you need to convert it into an integer stored in a number and let's say I print

10:01.080 --> 10:04.940
the number race to 3 which means I'm going numb.

10:04.990 --> 10:06.910
Q All right.

10:07.020 --> 10:16.150
Control shift f 10 control chip debt and we'll run the program answer number can to see 25 25 cube this

10:16.150 --> 10:18.220
1 5 6 5.

10:18.760 --> 10:19.900
All right.

10:19.900 --> 10:26.550
So with this we are done with installing pipes as well as the installed Anaconda which contains a bit

10:26.550 --> 10:28.300
of the book.

10:28.420 --> 10:31.300
We're going to use them interchangeably many times.

10:32.660 --> 10:34.190
In this particular case.

10:34.250 --> 10:34.790
OK.

10:35.030 --> 10:36.860
Hope you are communion though.

10:36.860 --> 10:38.080
Hope you have understood up to now.

10:38.090 --> 10:41.850
And as we go ahead we let's understand the models in detail.
