WEBVTT

00:00.750 --> 00:01.840
Hello once again.

00:02.130 --> 00:15.060
So we need to have full or simple recap off of a few things about quited and the nuts and bolts about

00:15.180 --> 00:20.430
it and maybe maybe a bit of basics but it's going to be a quick recap.

00:21.130 --> 00:24.140
Is uming that you already know the basics out there.

00:24.410 --> 00:32.690
HENN So but those which are essential for four core pythonic concepts are we just going to go Oh we're

00:32.690 --> 00:35.900
just going to go a quick recap of them and then go on to the.

00:36.650 --> 00:38.570
Then going to the higher topics.

00:38.570 --> 00:44.600
For now we're going to start up with pie charts and we're going to execute a few programs out here in

00:44.640 --> 00:46.920
PI chairman check out what we can do.

00:47.070 --> 00:47.900
All right.

00:47.900 --> 00:49.720
So here we have the first.

00:49.720 --> 00:55.340
I mean so I just create a full route here your van Spuyten with coyote and I just start with the nuts

00:55.340 --> 01:00.220
and bolts one printed in hello world and just check out whether you get the output out here.

01:00.440 --> 01:01.100
Right.

01:01.400 --> 01:08.900
Of course you're not going to go into a lot of specifics but if you remember in python there are there

01:08.900 --> 01:15.560
are four data structures right that are 40 structures or there are majorly Megilp if you read a structures

01:15.560 --> 01:23.630
like list topples which of them include less topples dictionaries and sets.

01:23.660 --> 01:29.580
Ok these are the four data data structures which are there in Python and they are generally used.

01:29.660 --> 01:34.760
Of course we're going to see a lot of data structures in this particular cause which are much more advanced

01:34.760 --> 01:45.540
and which are much more much more use for data analysis like say for example pi pie Pandurs which we're

01:45.580 --> 01:46.470
going to have a look.

01:46.510 --> 01:50.150
These are the libraries of course and the data structures are the number that is.

01:50.350 --> 01:56.560
And we're going to have a look at the panda CDs and the data streams which are there in Pandurs.

01:56.800 --> 02:01.000
So we're going to have a look at each of these data structures which are going to build up on these

02:01.000 --> 02:03.340
data structures that are going to be further.

02:03.340 --> 02:11.020
So as you know a list is defined with square brackets it's a quick recap where you can have different

02:11.020 --> 02:13.420
values in a particular list.

02:13.600 --> 02:21.850
You can print the LSD you can print the type of LSD right you can print the type of LSD and.

02:21.990 --> 02:22.810
And.

02:22.990 --> 02:30.210
And if you want you can access elements of the list by saying LSD off LSD off a particular index where

02:30.220 --> 02:31.690
the index starts from zero.

02:31.690 --> 02:37.360
LSD and polyclinics you can trade off the list in two different creations where you can say for every

02:37.360 --> 02:39.310
element in LSD.

02:39.310 --> 02:44.050
This is one kind of hydration for every element of LSD Prynne the element.

02:44.230 --> 02:49.730
This is number one a creation and other rightish and that you can have.

02:49.930 --> 02:51.290
So I can just print.

02:51.350 --> 02:56.800
I Trishna one iteration mattered one.

02:57.280 --> 03:06.430
And I can just print Deitrich and method 2 in here which is going to be using the range using range

03:06.430 --> 03:07.240
function.

03:07.240 --> 03:08.560
So here.

03:08.590 --> 03:15.200
I in a range I'm going to say range from where to where the stock will be from zero.

03:15.370 --> 03:16.660
That's by default.

03:16.660 --> 03:25.330
I need to go up to the lens of the LMT and go up to the end of LSD and print print the LSD of I.

03:25.600 --> 03:26.170
Right.

03:26.170 --> 03:30.690
So this is where Control shift often will give you run the code.

03:30.760 --> 03:31.870
So this is your list.

03:31.870 --> 03:33.760
It says it has a class list.

03:33.760 --> 03:39.040
And of course you will have each element of that list list LSD of two is zero.

03:39.100 --> 03:45.100
This is one this is do the second index because is how you access a list element that you have a efficient

03:45.100 --> 03:49.010
method one where you get for every element in LSD itself.

03:49.240 --> 03:52.020
And this is I tradition to right.

03:52.030 --> 03:53.910
You can use list there.

03:54.310 --> 03:56.590
There are different methods which can be there.

03:56.860 --> 04:03.090
And I'll just print the list metters a few of them which you can use sometimes.

04:03.240 --> 04:10.660
Right which you might which you might use if you remember LSD got a pen you could open the particular

04:10.660 --> 04:18.480
value let's say four or you could even open LSD or a pain you can append a list itself another list

04:18.480 --> 04:18.910
itself.

04:18.910 --> 04:21.420
You can have four five six four five.

04:21.700 --> 04:27.220
OK you can do an LSD that extend which is not going to append the list you need to give a list but it's

04:27.220 --> 04:28.710
not going to spend it.

04:28.830 --> 04:30.300
The list but it's going to happen.

04:30.300 --> 04:32.100
The elements inside the list.

04:32.380 --> 04:39.070
Let's say one come to come or three or yeah one come on to come three.

04:39.480 --> 04:46.270
And then now if I print the let's see let's see what happens after and see what happens.

04:46.320 --> 04:51.740
First is the normal list normal list was that one and then you have painted four.

04:51.870 --> 04:53.790
Can you see the four has been appended.

04:54.060 --> 05:00.130
And then you appended another list altogether 4 5 6 4 5 is a list altogether it's an entire list.

05:00.420 --> 05:06.030
And finally when it didn't extend do you give a list of the not up in the list but it friend the elements

05:06.030 --> 05:10.760
in the list inside this particular into this particular list.

05:10.770 --> 05:11.290
Right.
