1
00:00:09,890 --> 00:00:15,840
Welcome back, everyone, to 3D modeling Hobbit doll scene with Blendr two point nine and Adobe Photoshop.

2
00:00:16,100 --> 00:00:17,780
So now this is where we left off.

3
00:00:17,780 --> 00:00:20,180
What we need to do now is come over to left on side.

4
00:00:20,330 --> 00:00:22,070
I've actually put my pen and tablet away.

5
00:00:22,070 --> 00:00:23,840
Now, I'm not going to need that anymore.

6
00:00:23,960 --> 00:00:27,440
So I've just got my keyboard and mouse so left on side I hover over it.

7
00:00:27,440 --> 00:00:30,320
You'll see where I've got one quick selection.

8
00:00:30,320 --> 00:00:34,490
If you've not got that on just right click come down to it says Quick Selection Tool.

9
00:00:35,120 --> 00:00:41,000
You'll end up with a little place in the circle here and then just left click drug it down all the way

10
00:00:41,150 --> 00:00:45,200
and what you should do when you release it is it should grab everything like this.

11
00:00:45,530 --> 00:00:49,310
And I find this the easiest way to actually grab everything all in one go.

12
00:00:49,610 --> 00:00:51,800
I know you're going to do you're going to hover over this line, right.

13
00:00:51,800 --> 00:00:55,570
Click and come down to where it says Make quick path stops.

14
00:00:55,610 --> 00:00:59,870
Just click on the row one that you click right click make quick path.

15
00:01:00,920 --> 00:01:05,990
Click OK, and you'll end up with low dots all the way around, this is the start of the subject.

16
00:01:06,380 --> 00:01:11,200
Then what you need to do is you need to leave and you're going to come down to it says New Philia,

17
00:01:11,300 --> 00:01:13,010
and you're going to click on Solid Color.

18
00:01:14,190 --> 00:01:19,500
You're going to go across and click, OK, and now basically, once you've picked your color, which

19
00:01:19,500 --> 00:01:23,630
is going to be solid black, so just make sure this is down to solid black click, OK?

20
00:01:24,000 --> 00:01:26,170
And now this is ready to be exposed.

21
00:01:26,220 --> 00:01:32,430
Now all you need to do is just come down and just take off the actual old actual layer.

22
00:01:32,430 --> 00:01:37,560
So click this off and the new one should on this little square that come over to file and we're going

23
00:01:37,560 --> 00:01:40,410
to export and then export us.

24
00:01:43,620 --> 00:01:44,430
Let me slow down.

25
00:01:44,580 --> 00:01:49,260
This is the actual preview, if you've not got that on, just click on over here, come over to the

26
00:01:49,260 --> 00:01:51,470
right hand side where you'll have one that says former.

27
00:01:51,600 --> 00:01:53,960
This will be on P and G or something like that.

28
00:01:54,030 --> 00:01:56,850
And just make sure that it's actually on SPG.

29
00:01:57,060 --> 00:02:01,680
Now, when you click export, it will actually bring up a screen where you need to save it out.

30
00:02:02,010 --> 00:02:04,500
So let's come down and click the button.

31
00:02:05,600 --> 00:02:11,450
Let me think about it and then let's find with the actual files where I've saved out, so here is Mignot,

32
00:02:11,450 --> 00:02:12,400
says SBJ.

33
00:02:12,410 --> 00:02:18,080
I'm just going to double click it and I'm going to save this out of stained glass.

34
00:02:20,220 --> 00:02:21,000
Hummingbird

35
00:02:23,790 --> 00:02:29,190
window, like, so presentable, and it will say that as an object.

36
00:02:29,940 --> 00:02:32,580
All right, so just let think about and actually save the owl.

37
00:02:34,850 --> 00:02:40,980
And now that's done will actually go on over to blender, so here we are with an actual blender.

38
00:02:41,240 --> 00:02:44,690
What I want to do is I just want to clear this actual scene just a little bit.

39
00:02:44,810 --> 00:02:48,560
So at the moment, I've got a Cuban here and it's just a click on any of these.

40
00:02:48,560 --> 00:02:51,890
All you need to do is just left leg and then you to click on these.

41
00:02:52,010 --> 00:02:55,340
Then you press delete on your keyboard and I'll just delete all the way.

42
00:02:55,460 --> 00:02:57,040
Let's delete the camera as well.

43
00:02:57,050 --> 00:03:00,950
And also this point, like we're not going to need to point line anyway, personally.

44
00:03:01,280 --> 00:03:02,350
And there we go.

45
00:03:02,570 --> 00:03:05,760
Now, a couple of other things to actually zoom into something.

46
00:03:05,930 --> 00:03:09,920
What you need to do is you just need to move the scroll wheel forwards and backwards and that will zoom

47
00:03:09,920 --> 00:03:11,660
in to orbit around something.

48
00:03:11,660 --> 00:03:17,270
You just going to hold the middle mouse button and then you're about to orbit around and to move left

49
00:03:17,270 --> 00:03:17,610
and right.

50
00:03:17,630 --> 00:03:23,030
So, Punin, hold the shift and the middle mouse then you built upon in whichever direction you choose.

51
00:03:23,210 --> 00:03:24,530
Now there are a couple more things.

52
00:03:24,530 --> 00:03:28,850
I'm actually just going to bring in cylinder because I'm actually going to need a cylinder for this.

53
00:03:28,940 --> 00:03:35,700
So I'm going to basically press it a mesh come up to where it's a cylinder and bring that in line.

54
00:03:35,790 --> 00:03:38,970
So now the cylinders here can show you what else you can do.

55
00:03:38,990 --> 00:03:42,980
So if I press the dots on the actual number pad, you'll see that I can actually zoom in.

56
00:03:42,980 --> 00:03:49,820
And once I've zoomed in on actually orbit around this, it will actually orbit around the center origin

57
00:03:49,820 --> 00:03:53,360
of whatever you've actually brought in and zoomed up to.

58
00:03:53,510 --> 00:03:59,480
Now, the other thing is you can use a number pad to actually go to front of view using one on the number

59
00:04:00,200 --> 00:04:01,400
three on the number pad.

60
00:04:01,400 --> 00:04:04,660
A side view, seven on the number pad is top view.

61
00:04:04,760 --> 00:04:08,860
And then when you press control seven, for instance, that will give you the reverse.

62
00:04:08,870 --> 00:04:12,820
So control one is the rear control, three is the other side.

63
00:04:12,950 --> 00:04:16,760
Control seven, as I say, is the bottom and all these things.

64
00:04:17,240 --> 00:04:21,290
I'll take a bit of time to actually get in your head, but once you've got them, you'll find it very

65
00:04:21,290 --> 00:04:23,120
easy now to actually move around.

66
00:04:23,900 --> 00:04:29,050
So now I'm just going to actually delete this under all the way to give me a fresh actual viewport.

67
00:04:29,060 --> 00:04:30,790
And this is the actual viewport.

68
00:04:30,980 --> 00:04:33,080
And then what we're going to do is going to do edit.

69
00:04:33,350 --> 00:04:37,730
I'm going to come down to where it says preferences and we're going to bring in an actual Add-On.

70
00:04:37,850 --> 00:04:42,110
Now, these Add-Ons are actually built in within Blendr, so they should be there for you.

71
00:04:42,260 --> 00:04:45,950
Come over to a little search and make sure that you're on Adam's on here.

72
00:04:46,160 --> 00:04:52,430
And then let's bring SPG and you'll see one that says Import-Export Scalable Vector Graphics.

73
00:04:52,430 --> 00:04:56,260
And this is the one you just need to keep on click refresh to close it down.

74
00:04:56,540 --> 00:05:02,990
Now, in a press file, come on down to where it says imports, you'll see that this is an option to

75
00:05:02,990 --> 00:05:05,060
bring in scalable vector graphics.

76
00:05:05,090 --> 00:05:11,060
Click now on and now you need to do is just go to where you've actually set out Hummingbird or whatever

77
00:05:11,060 --> 00:05:12,700
Steinglass you actually created.

78
00:05:13,160 --> 00:05:18,110
So here is where my file is in SPG and here is my stained glass window.

79
00:05:18,110 --> 00:05:21,680
So double click it and then you'll notice that something comes in.

80
00:05:21,860 --> 00:05:27,130
Now this is brought in as an SPG, which means now we can turn this into actual mesh.

81
00:05:27,170 --> 00:05:28,520
So how are we going to do that?

82
00:05:28,700 --> 00:05:29,640
First of all, we're going to left.

83
00:05:29,660 --> 00:05:35,330
Click on it and you'll notice over the rights on side here, we've actually got one that is basically

84
00:05:35,330 --> 00:05:35,990
a code.

85
00:05:36,140 --> 00:05:40,920
So you can see within here, we've got lots of lots of options where we can do things, especially for

86
00:05:40,920 --> 00:05:42,070
help, open the geometry.

87
00:05:42,110 --> 00:05:44,630
We can actually bring out the extrude and things like that.

88
00:05:44,780 --> 00:05:46,960
Now, I'm not going to use any of these.

89
00:05:47,480 --> 00:05:50,540
So if you've used cars before, you'll be well aware of what these do.

90
00:05:50,690 --> 00:05:53,510
All I'm going to do is I'm going to come up and click on 3D.

91
00:05:53,630 --> 00:05:58,880
And while that's going to do now, it's actually going to give me mesh that is not actually filled in

92
00:05:58,880 --> 00:06:01,210
because I want to build this mesh in myself.

93
00:06:01,340 --> 00:06:06,230
And the reason I want to do that is because if I let Blendr fill this in is going to be very, very

94
00:06:06,230 --> 00:06:09,270
dense on the actual polygon count.

95
00:06:09,470 --> 00:06:14,090
Now, at the moment, down the round side, you will see that I have actually got a polygon count and

96
00:06:14,090 --> 00:06:17,000
I've got all this information here to bring that on.

97
00:06:17,000 --> 00:06:19,640
All you do is you got to edit preferences.

98
00:06:21,120 --> 00:06:26,610
And then you're going to go to interface, come down to it, say status bar, and you'll see that all

99
00:06:26,610 --> 00:06:27,740
these are probably ticked off on.

100
00:06:28,110 --> 00:06:29,170
Just click them all along.

101
00:06:29,250 --> 00:06:33,180
And as you click them on, you'll see different information that will tell you how many events are in

102
00:06:33,180 --> 00:06:33,690
the scene.

103
00:06:33,960 --> 00:06:36,850
I'll tell you the memory that's being used and all that good stuff like that.

104
00:06:37,050 --> 00:06:39,150
Now, just press the button just to close that down.

105
00:06:39,240 --> 00:06:43,830
And what we need to do now, if I press the button, you'll see that we've got all these little points.

106
00:06:44,030 --> 00:06:47,940
These little points is basically where all the joynes all around.

107
00:06:47,940 --> 00:06:53,160
Actually, this actual mesh, when we turn it into a mesh at the moment, it's not a mesh, it's just

108
00:06:53,160 --> 00:06:53,880
actually occur.

109
00:06:54,000 --> 00:06:55,910
So let's now turn it into a mesh.

110
00:06:55,950 --> 00:07:02,820
So if we're going to object, come down to where it says convert and you're going to convert mesh from.

111
00:07:03,180 --> 00:07:07,740
So click that on and you'll notice that that curve actual top has disappeared.

112
00:07:07,810 --> 00:07:12,040
And now in a press tab, you'll see that this is the mesh we can actually use.

113
00:07:12,240 --> 00:07:18,030
Now, if I press a that will actually select everything and I want to press delete, come down, I'm

114
00:07:18,030 --> 00:07:19,920
going to use limb to dissolve.

115
00:07:20,070 --> 00:07:24,900
And while that's going to do is it's going to clear out all of these points that we don't really need

116
00:07:24,990 --> 00:07:28,650
if our price controls that you'll see that we've got thousands of these points.

117
00:07:28,770 --> 00:07:35,370
Now, each one of these points will join over to the other side in some way to actually create this

118
00:07:35,370 --> 00:07:35,900
mesh.

119
00:07:35,910 --> 00:07:37,050
And that is what I'm saying.

120
00:07:37,050 --> 00:07:42,390
If I don't do this, you'll end up with a really, really dense, heavy mesh and what we're doing,

121
00:07:42,390 --> 00:07:43,360
we really don't need that.

122
00:07:43,620 --> 00:07:46,200
So, again, press delete, limit to dissolve.

123
00:07:46,440 --> 00:07:49,800
And now we're going to do before we do anything else is actually more cost.

124
00:07:49,800 --> 00:07:54,540
Seems I want to actually pull a short video that describes why we're actually marking same stuff.

125
00:07:54,540 --> 00:07:57,960
You watch that and then come back and you'll understand exactly what we're doing.

126
00:07:58,020 --> 00:08:00,030
OK, once I'll see in a few minutes.

127
00:08:01,320 --> 00:08:07,580
One, this is the quick demo just to show you why seams are important and basically why we use them

128
00:08:07,590 --> 00:08:08,400
the way we do.

129
00:08:08,580 --> 00:08:10,080
So he can see a tube.

130
00:08:10,080 --> 00:08:16,140
And if I press the top on this tube and highlights it, you can see at the moment that each one of these

131
00:08:16,140 --> 00:08:18,780
sides actually is represented on the UV map.

132
00:08:18,780 --> 00:08:23,610
And you can see how it's flattened out from a 3D to an actual Tudi.

133
00:08:23,700 --> 00:08:27,750
And this is actually how we apply textures and materials on that.

134
00:08:27,930 --> 00:08:31,920
So what we need to do now to actually manipulate this is Moxham same.

135
00:08:31,930 --> 00:08:35,790
So if I Mogg seems like this, for instance, going round.

136
00:08:38,300 --> 00:08:46,850
Like this, right, click moxie, and now actually I grab it and unwrap it so you Honora you'll see

137
00:08:46,850 --> 00:08:50,240
now that it's on, not in the way that we actually want it.

138
00:08:50,390 --> 00:08:52,850
So basically unwrapped it like Postle.

139
00:08:53,180 --> 00:08:55,370
Now, moving on to the cylinder.

140
00:08:55,610 --> 00:08:56,930
This is a little bit different.

141
00:08:56,940 --> 00:09:04,550
So if I grab the top on the bottom of it and I press control Lee come down to mop scenes and now I try

142
00:09:04,550 --> 00:09:08,880
and actually own this, you'll see this part here is a real mess.

143
00:09:09,590 --> 00:09:11,480
These parts are actually on racks.

144
00:09:11,480 --> 00:09:12,410
Absolutely fine.

145
00:09:12,680 --> 00:09:18,030
So I have to grab the whole thing and I come up and try and on right now and I press you on.

146
00:09:18,060 --> 00:09:18,440
Right.

147
00:09:18,590 --> 00:09:20,390
You'll see that these parts see it.

148
00:09:20,960 --> 00:09:23,480
If you look at the texture, it's a real, real mess.

149
00:09:23,660 --> 00:09:28,240
And the reason for that is because we've not told Blendr we're actually seeing needs to.

150
00:09:28,760 --> 00:09:32,350
So they said Blendr is just trying to loop this in an infinite loop.

151
00:09:32,630 --> 00:09:35,790
So when I talk about the loops, that's exactly what this is.

152
00:09:36,110 --> 00:09:44,000
So if we a now on the side, just one seam, the right click seam and now we actually grab it and try

153
00:09:44,000 --> 00:09:44,580
and run.

154
00:09:44,960 --> 00:09:46,660
You'll see now a contrast.

155
00:09:46,790 --> 00:09:48,000
Really, really nice.

156
00:09:48,020 --> 00:09:49,390
And it actually looks correct.

157
00:09:49,700 --> 00:09:55,370
Now, talking about seams, the one thing you do need to remember is that you should always mock seams

158
00:09:55,520 --> 00:09:58,220
where the least likely to be seen.

159
00:09:58,280 --> 00:10:04,100
So, for instance, this was a cylinder out market, the back where it's the least likely for a player

160
00:10:04,100 --> 00:10:11,270
or camera or Arenda to actually see the seam, because you can actually see if you look very carefully,

161
00:10:11,420 --> 00:10:14,180
you can actually see where the seam actually joins.

162
00:10:14,390 --> 00:10:17,930
Now in things like wood, it doesn't matter too much because it's very hard to see.

163
00:10:18,080 --> 00:10:22,550
But when you actually mulgan in a seam where there's wood or tiles or things like that, it's going

164
00:10:22,550 --> 00:10:23,760
to be very easy to see.

165
00:10:24,020 --> 00:10:28,070
So there is a quick explanation of why we do seems the way we do.

166
00:10:28,250 --> 00:10:29,720
And I hope you learned a lot from that.

167
00:10:30,080 --> 00:10:30,920
Welcome back, everyone.

168
00:10:30,930 --> 00:10:34,040
I hope you enjoyed that so that we're going to do is going to Mongkol seems.

169
00:10:34,040 --> 00:10:36,920
But before I show you that, I need to tell you about is the top.

170
00:10:37,430 --> 00:10:42,140
So the top button, when you press it basically takes you in to edit mode.

171
00:10:42,230 --> 00:10:44,810
So you'll notice the moment we are in object mode.

172
00:10:44,990 --> 00:10:47,390
And if I press top, you'll see now we're in attack mode.

173
00:10:47,570 --> 00:10:52,790
Now, in any mode I can actually grab these virtues, for instance, or I can grab them all and things

174
00:10:52,790 --> 00:10:53,240
like that.

175
00:10:53,240 --> 00:10:58,310
Now, in object, most of a press top, the only thing I can grab is the actual whole object, and that's

176
00:10:58,310 --> 00:10:59,780
the only thing I can move it around.

177
00:10:59,900 --> 00:11:03,280
So any mode is actually to edit the actual mesh.

178
00:11:03,320 --> 00:11:04,730
So now let's say I press top.

179
00:11:04,850 --> 00:11:09,740
Just make sure you've grabbed everything with the Oborne Press delete to actually bring down the actual

180
00:11:09,740 --> 00:11:10,810
number of verses.

181
00:11:10,820 --> 00:11:15,230
And then what we're going to do is we're going to actually Mongkol seems now first of all, you'll notice

182
00:11:15,230 --> 00:11:18,780
that over on the left, on side we have these three little tabs here.

183
00:11:18,950 --> 00:11:20,050
This one is versus.

184
00:11:20,080 --> 00:11:21,740
So these are these little known things.

185
00:11:21,950 --> 00:11:23,510
The next one is EDG.

186
00:11:23,510 --> 00:11:26,800
So if I can grab now all of the edges of this cell in there.

187
00:11:26,810 --> 00:11:28,540
And finally, the next one is faces.

188
00:11:28,550 --> 00:11:30,050
We haven't got any faces yet.

189
00:11:30,050 --> 00:11:31,700
And that is something that we actually need.

190
00:11:31,880 --> 00:11:33,500
So that's Perowne edges for now.

191
00:11:33,620 --> 00:11:40,010
And then what we'll do is we'll grab everything with a and then I'm going to right click come down and

192
00:11:40,010 --> 00:11:42,200
you'll have one that says Maxime's.

193
00:11:42,290 --> 00:11:44,560
And now I need to do is actually need to fill this in.

194
00:11:44,690 --> 00:11:49,960
So all I'm going to do is I want to press alter and you'll notice now that this fills all of these in.

195
00:11:50,150 --> 00:11:53,190
Now, you might not like so many triangles on here.

196
00:11:53,240 --> 00:11:55,030
You might want more polygons.

197
00:11:55,400 --> 00:12:01,370
So all you need to do to actually fix that is come over to face, select, hover over it right click,

198
00:12:01,370 --> 00:12:03,770
come down and say tries to Quad's.

199
00:12:03,830 --> 00:12:05,180
And that's what Blende is going to do.

200
00:12:05,180 --> 00:12:08,900
That is going to try and convert all of these triangles into actual quotes.

201
00:12:08,900 --> 00:12:14,620
So let's click on now and you'll see a lot of them now display and it just looks a little bit cleaner

202
00:12:14,690 --> 00:12:16,510
and that is what we're actually looking for.

203
00:12:16,970 --> 00:12:21,020
Now, the next thing I need to do is obviously I need to bring this out, because at the moment it's

204
00:12:21,020 --> 00:12:22,750
just a basically a flat mesh.

205
00:12:22,880 --> 00:12:27,230
So the way to do that while we've grabbed everything and while we're in that mode is we're just going

206
00:12:27,230 --> 00:12:33,050
to press e I'm just going to drag it up and not actually extrude them out and have a press type.

207
00:12:33,050 --> 00:12:38,090
You can see that we've got this and it's looking really, really nice and actually clean.

208
00:12:38,300 --> 00:12:41,120
The only one thing you can see is you've got all these bombs.

209
00:12:41,360 --> 00:12:44,350
Now let's get rid of this material because this material is not what we want.

210
00:12:44,810 --> 00:12:47,300
So Olders will come over to the right hand side.

211
00:12:47,300 --> 00:12:49,070
And this is the materials panel.

212
00:12:49,220 --> 00:12:53,090
And you can say at the moment the material is SPG material and I don't want that.

213
00:12:53,090 --> 00:12:57,620
So I'm just going to remind myself I'm not actually going to put the material on here at the moment.

214
00:12:57,710 --> 00:12:58,640
I'm only doing this.

215
00:12:58,640 --> 00:13:02,420
So basically I can see what I'm doing and now I'm do is it went smoothly.

216
00:13:02,420 --> 00:13:05,180
Sol So we haven't got all these little bumps that I want to.

217
00:13:05,180 --> 00:13:05,450
Right.

218
00:13:05,450 --> 00:13:10,180
Click in object mode and come to shapes move and you will end up with something like that.

219
00:13:10,520 --> 00:13:15,320
And then what you can do is you can come over to this little triangle here, come round to where it

220
00:13:15,320 --> 00:13:18,010
says normal's and then click also smooth on.

221
00:13:18,290 --> 00:13:21,600
And what it's going to do is going to smooth all those edges around here.

222
00:13:21,800 --> 00:13:24,530
This is based obviously on a percentage.

223
00:13:24,680 --> 00:13:30,950
And if it crosses that percentage, then it will smooth that edge of normally this is the standard say

224
00:13:31,250 --> 00:13:32,240
thirty degrees.

225
00:13:32,270 --> 00:13:35,100
And that's normally enough to smooth everything off that you actually need.

226
00:13:35,450 --> 00:13:37,570
OK, so on the next one will actually work for.

227
00:13:37,920 --> 00:13:44,340
On this actual stained glass window and we'll actually start making the glass, OK, everyone, so enjoy

228
00:13:44,370 --> 00:13:45,870
that and I'll see you on the next one.

229
00:13:45,900 --> 00:13:46,480
Thanks a lot.

230
00:13:46,500 --> 00:13:46,950
Bye bye.
