1
00:00:10,070 --> 00:00:15,530
Welcome back, everyone, to 3D modelling, a Hobbit doll scene with Blender two point nine and Adobe

2
00:00:15,530 --> 00:00:16,210
Photoshop.

3
00:00:16,370 --> 00:00:17,920
And this is where we left off.

4
00:00:18,140 --> 00:00:25,310
Now, at the moment, the center of origin of my actual bird is probably somewhere over here and not

5
00:00:25,310 --> 00:00:26,480
in the correct place.

6
00:00:26,630 --> 00:00:31,880
So the way to put the center of origin, which is here, which should be the center of this bird, is

7
00:00:31,880 --> 00:00:32,870
to click right.

8
00:00:32,870 --> 00:00:40,010
Click anywhere on the actual viewport here and just make sure that you are in object mode by pressing

9
00:00:40,010 --> 00:00:40,820
top right.

10
00:00:41,100 --> 00:00:46,010
The origin to geometry, and that should put the center of origin in the center.

11
00:00:46,280 --> 00:00:51,950
Now, sometimes with a complex thing like this, the center of origin might not actually be right in

12
00:00:51,950 --> 00:00:52,520
the center.

13
00:00:52,640 --> 00:00:54,860
So what we'll do is we'll give it a try and see how it is.

14
00:00:54,950 --> 00:01:01,400
And the way to do that, as you can see at the moment of Garrix here, this red and white circle here.

15
00:01:01,550 --> 00:01:04,670
And if I shift right click, I can actually move this case around.

16
00:01:04,880 --> 00:01:08,150
I want the actual cursor to be where the center of origin is.

17
00:01:08,180 --> 00:01:13,940
And the reason for that is because when I bring in another object, I want to call them exactly where

18
00:01:13,940 --> 00:01:14,720
this cursor is.

19
00:01:14,750 --> 00:01:17,300
So I'm going to do is I want to push it s come down.

20
00:01:17,300 --> 00:01:22,400
I'm going to pull cursor to selected and that is going to put the cursor where the center of origin

21
00:01:22,400 --> 00:01:22,720
is.

22
00:01:22,760 --> 00:01:25,350
And now I want to bring in a new piece of mesh.

23
00:01:25,370 --> 00:01:29,900
So shift a match, come down, bring in a cylinder, you'll see the sun.

24
00:01:29,900 --> 00:01:31,930
There is exactly where I want it.

25
00:01:31,940 --> 00:01:34,100
So now let's make this on the smaller.

26
00:01:35,780 --> 00:01:41,930
With the Esbjorn now to make this cylinder smaller, what we're going to use is the eSport, and that's

27
00:01:41,930 --> 00:01:42,920
actually a full scale.

28
00:01:42,920 --> 00:01:45,950
So you can say I can now scale this actually down.

29
00:01:46,190 --> 00:01:50,310
Now, the other thing is when you scale in something, you can scale it on the axis.

30
00:01:50,330 --> 00:01:52,560
So let's discuss the axis now.

31
00:01:52,850 --> 00:01:58,070
Now, the down axis here, which you can't actually see, but it should be blue and it normally comes

32
00:01:58,070 --> 00:02:04,220
from the top to the bottom is the actual Z axis you can turn on if you come over here and click on these

33
00:02:04,370 --> 00:02:09,530
two little interlocking balls and come off to where it says Axis and click the Z axis and you'll see

34
00:02:09,530 --> 00:02:10,910
now that actually appears.

35
00:02:10,970 --> 00:02:14,110
I'm just going to turn that off because I find it actually annoying when that's on that.

36
00:02:14,150 --> 00:02:15,280
But you can put yourself.

37
00:02:15,560 --> 00:02:20,600
Now you've got the Y axis, which is the green actually here on the x axis, which is the one running

38
00:02:20,600 --> 00:02:21,270
across it.

39
00:02:21,440 --> 00:02:27,740
So if we want to scale this on the x axis or we pressies s an X and then we can scale in like.

40
00:02:27,740 --> 00:02:31,130
So at the moment, no, I don't need to scale on these two axis.

41
00:02:31,130 --> 00:02:32,300
I need scale on the Z.

42
00:02:32,450 --> 00:02:38,180
So in essence that bring it down and just scale it like so and then I'm going to pull it down just to

43
00:02:38,180 --> 00:02:39,270
make it a little bit smaller.

44
00:02:39,440 --> 00:02:42,580
Now it's bringing the movement tall so you can bring this up and down like.

45
00:02:42,620 --> 00:02:47,330
So what you need to do is you need to shift spacebar and then you'll end up with something, a little

46
00:02:47,330 --> 00:02:50,420
menu that pops up and you can see it says, move here.

47
00:02:50,420 --> 00:02:51,410
So click that on.

48
00:02:51,570 --> 00:02:54,170
Nice to be able to bring that into place.

49
00:02:54,320 --> 00:02:59,450
Now you can say it's far too big, so I'm gonna press seven to go with the top of it and then I'm going

50
00:02:59,450 --> 00:03:01,220
to bring it in again with scale.

51
00:03:01,220 --> 00:03:05,370
So let's bring it in and you can see that it's very, very slightly out.

52
00:03:05,630 --> 00:03:10,010
Now, I'm not going to worry too much about it, and it's actually perfectly centered.

53
00:03:10,010 --> 00:03:14,920
I'm just going to put in something which I think is kind of the center I'm going to bring in.

54
00:03:15,170 --> 00:03:17,300
This is actually the glass.

55
00:03:17,360 --> 00:03:18,820
This is what this is going to be.

56
00:03:18,920 --> 00:03:23,210
And the thing is round the outside of here is actually going to be wood.

57
00:03:23,480 --> 00:03:25,970
So the glass overlapping a little bit past.

58
00:03:25,970 --> 00:03:27,680
It doesn't really make a difference.

59
00:03:27,680 --> 00:03:28,580
I'm just going to line up.

60
00:03:28,580 --> 00:03:30,270
So it's a little bit better than where it was.

61
00:03:30,380 --> 00:03:33,470
I want to make it a little bit bigger as well, just to make sure we've got it all.

62
00:03:33,590 --> 00:03:40,250
And now the most important thing is what I need to make sure is that this glass is in the correct position.

63
00:03:40,250 --> 00:03:44,890
So I'm going to pull it up so that it's kind of in to the métier.

64
00:03:44,900 --> 00:03:47,950
So you can see my hummingbird is into the mesh.

65
00:03:47,960 --> 00:03:51,770
And then finally one considers decide when to grab the top of the head.

66
00:03:52,070 --> 00:03:53,090
So I'm going to grab the top.

67
00:03:53,450 --> 00:03:57,620
I went to pay and then you're going to end up with a little menu and you click selection.

68
00:03:57,740 --> 00:04:02,760
And while that's going to do is it's going to split this off from this bomb plot.

69
00:04:02,810 --> 00:04:04,910
So you can see this now is into pieces.

70
00:04:05,120 --> 00:04:07,130
And then I'm simply going to grab the bottom piece.

71
00:04:07,310 --> 00:04:12,530
I'm going to click delete and that's going to delete out the way, leaving me with just basically a

72
00:04:12,530 --> 00:04:17,890
flat plain, which is halfway into my actual hummingbird mesh.

73
00:04:17,930 --> 00:04:23,780
Now, the next thing I want to do is actually want to create the glass from this plane here.

74
00:04:23,900 --> 00:04:25,660
So the way I'm going to do that, I'm going to press control.

75
00:04:25,660 --> 00:04:28,090
I come down to where it says all transforms.

76
00:04:28,100 --> 00:04:33,080
And the reason we do that, as I'm pouring down the bottom right hand side is that so we can actually

77
00:04:33,080 --> 00:04:34,490
bring in a modifier.

78
00:04:34,580 --> 00:04:36,500
If you don't reset, it transforms.

79
00:04:36,620 --> 00:04:40,520
You'll find that you have many problems when you bring modifiers in or doing anything else.

80
00:04:40,530 --> 00:04:42,440
So always reset you transforms.

81
00:04:42,440 --> 00:04:46,220
And if anything is going wrong, the first thing to do, go into object mode.

82
00:04:46,340 --> 00:04:48,850
Press control like all transforms, right?

83
00:04:49,310 --> 00:04:51,230
So origin to geometry.

84
00:04:51,230 --> 00:04:54,220
And that normally fixes most issues that you'll come across.

85
00:04:54,650 --> 00:04:55,430
Now, we've done not.

86
00:04:55,430 --> 00:04:59,290
What we need to do is need to actually use this as an actual boolean.

87
00:04:59,300 --> 00:05:04,870
So this bird here, when it uses a boolean to make sure that we can split this glassell.

88
00:05:05,090 --> 00:05:09,500
So if you make sure that you click on your plane now, come over to little Sponer.

89
00:05:09,500 --> 00:05:10,880
This is the modifieds top.

90
00:05:11,140 --> 00:05:12,500
I want to add modifier.

91
00:05:12,620 --> 00:05:17,870
And what you're going to do is you're going to come down to where it says to me now on the Boolean menu,

92
00:05:17,870 --> 00:05:21,950
which will pop up here, you'll have these three little choices here.

93
00:05:22,610 --> 00:05:23,940
Make sure it's on difference.

94
00:05:23,960 --> 00:05:24,710
It should be.

95
00:05:24,740 --> 00:05:29,990
And then click on this little pipette, come over and just make sure you hovering over the actual bird

96
00:05:29,990 --> 00:05:31,430
or whatever you've created.

97
00:05:31,610 --> 00:05:34,580
Click on that and then something like this will happen.

98
00:05:34,700 --> 00:05:37,990
Now, it doesn't look like much has happened at the moment, but it actually has.

99
00:05:38,150 --> 00:05:40,220
So we need to actually apply this.

100
00:05:40,220 --> 00:05:45,380
And the way we do that is you can even come down, click on this arrow and click apply or you can hover

101
00:05:45,380 --> 00:05:47,900
over it and press control and actually apply.

102
00:05:47,910 --> 00:05:50,660
But now let's remove all bird.

103
00:05:50,900 --> 00:05:53,540
So just make sure I've got my booklets on their own press.

104
00:05:53,540 --> 00:05:59,060
They want to hide it out the way now to hide something you press hate to or need something you press

105
00:05:59,100 --> 00:05:59,330
on.

106
00:06:01,040 --> 00:06:04,150
Now we can see that this now is split up.

107
00:06:04,160 --> 00:06:10,400
So if I click on this, you can see that if I press top that if I'm on face like I've got all these

108
00:06:10,400 --> 00:06:15,590
little islands now which are split or ready to bring in our glass, which is a really easy technique

109
00:06:15,740 --> 00:06:16,850
to actually do this.

110
00:06:17,330 --> 00:06:18,260
So now I've got this.

111
00:06:18,260 --> 00:06:24,020
What I want to do is I want to unwrap it ready to actually bring in my materials, which is the glass.

112
00:06:24,170 --> 00:06:27,350
So I want to do is I want to press a to grab everything.

113
00:06:27,620 --> 00:06:31,010
And then I'm going to go over to my movie editing top.

114
00:06:31,010 --> 00:06:33,740
So you'll notice from now the moment we've got all these tubs at the top.

115
00:06:33,860 --> 00:06:34,820
Let's go over to the.

116
00:06:34,870 --> 00:06:41,340
The edited and this is basically where you can unwrap your models and actually look at how you're going

117
00:06:41,340 --> 00:06:42,570
to apply the materials.

118
00:06:43,140 --> 00:06:44,670
So, again, down the bum around.

119
00:06:44,670 --> 00:06:47,550
So I'm going to explain what the UV mapping actually is.

120
00:06:47,850 --> 00:06:52,740
Now, if I make sure I'm on this path of EUPOL and I press you, and then you'll come down to where

121
00:06:52,740 --> 00:06:56,190
it says from now and then you'll unwrap all these little parts.

122
00:06:56,340 --> 00:07:01,550
Now, for this, we're not going to worry whereabouts they all on the movie map or anything like that,

123
00:07:01,560 --> 00:07:06,810
where I'm going worry our big deal because we're actually going to bring in an actual material that

124
00:07:06,810 --> 00:07:07,750
hasn't got any texture.

125
00:07:08,070 --> 00:07:12,650
In other words, it's kind of a procedural material created in Blender.

126
00:07:12,690 --> 00:07:17,590
So the actual UV mapping doesn't really make any difference apart from it.

127
00:07:17,610 --> 00:07:20,490
Make sure that the material goes on correctly.

128
00:07:20,760 --> 00:07:26,460
So now, before we bring in our material, what we need to do is we actually need to bring in a light

129
00:07:26,460 --> 00:07:28,460
source so we can see exactly what we're doing.

130
00:07:28,560 --> 00:07:30,040
So let's say out now.

131
00:07:30,120 --> 00:07:34,890
So what we do is we going to head over to the model on top and you'll end up with something like this.

132
00:07:34,890 --> 00:07:37,580
And you can see now you've got a nice plain viewport to actually work in.

133
00:07:37,890 --> 00:07:40,620
Let's press the top on to go back into object mode.

134
00:07:40,630 --> 00:07:43,830
Let's press all take to bring back our actual bed.

135
00:07:43,960 --> 00:07:47,820
And now I want to do is I want to rotate these so that face in the right way.

136
00:07:48,000 --> 00:07:49,650
So I'm going to grab them both.

137
00:07:49,830 --> 00:07:56,650
Now you can grab them both, either shift clicking them or you can actually be to get select and just

138
00:07:56,670 --> 00:07:57,370
select them all.

139
00:07:57,750 --> 00:07:59,940
So now I want to rotate them.

140
00:08:00,030 --> 00:08:06,210
And again, rotation is like scale so you can rotate freely or you can rotate on the axis.

141
00:08:06,360 --> 00:08:12,900
I always recommend you rotate on axis rotation freely like all like this means we go all over the place

142
00:08:12,900 --> 00:08:14,230
and that's something that we don't want.

143
00:08:14,580 --> 00:08:19,530
So we want to do is we want to rotate along the x axis or focus all X.

144
00:08:19,860 --> 00:08:22,660
And then also what you can do is you can import a number.

145
00:08:22,860 --> 00:08:26,170
So, for instance, we know this trend in 60 degrees in a circle.

146
00:08:26,190 --> 00:08:32,760
So if we rotate it by 90, so press nine zero on the number pad, enter, and then you're going to rotate

147
00:08:32,760 --> 00:08:34,560
it by 90 degrees.

148
00:08:34,560 --> 00:08:35,070
And there you go.

149
00:08:35,070 --> 00:08:37,320
You can see now it's facing the right way in the press.

150
00:08:37,320 --> 00:08:38,460
One on the number pad.

151
00:08:38,580 --> 00:08:43,560
I can say that I can now look straight on and that's exactly what I want.

152
00:08:43,890 --> 00:08:46,500
Now, let's bring in an actual light source.

153
00:08:46,680 --> 00:08:50,280
At the moment, we can't really see what this is going to look like.

154
00:08:50,430 --> 00:08:55,940
So let's come over to our little TV here and you'll notice that he says render engine.

155
00:08:55,940 --> 00:09:02,790
Even now, EV is going to actually have a look at what you're actually coming up with, how the scene

156
00:09:02,790 --> 00:09:07,050
is coming along, because what it does is actually renders in real time.

157
00:09:07,050 --> 00:09:10,810
And that's exactly what we want for just looking at all scene.

158
00:09:11,040 --> 00:09:16,230
Now, there are times when you do need to put it onto cycles over like this down arrow and I come to

159
00:09:16,260 --> 00:09:17,480
cycles, for instance.

160
00:09:17,670 --> 00:09:19,110
Now, you won't say anything happened yet.

161
00:09:19,230 --> 00:09:24,900
And the reason for that is because I haven't put it on the actual viewport shading yet, which I will

162
00:09:24,900 --> 00:09:25,800
do in a second.

163
00:09:25,990 --> 00:09:32,760
Now, Cycles is basically I find at least it actually produces better renders, but you can't really

164
00:09:32,760 --> 00:09:35,070
view things in real time that easily.

165
00:09:35,190 --> 00:09:40,550
So if I come now to our actual shader and I'll explain what these problems do.

166
00:09:40,740 --> 00:09:44,340
So at the moment we are in solid, which is this one.

167
00:09:44,550 --> 00:09:47,910
If we come to the left hand side, this is wireframe.

168
00:09:47,910 --> 00:09:48,930
So I click that on.

169
00:09:49,110 --> 00:09:52,590
You can see basically all of the mesh which was actually created.

170
00:09:52,770 --> 00:09:54,060
And then we come to the next one.

171
00:09:54,240 --> 00:09:55,310
This is materials.

172
00:09:55,470 --> 00:09:59,640
Now, you won't see anything on here at the moment because we haven't actually Applied Materials, but

173
00:09:59,640 --> 00:10:00,940
we will be using that one.

174
00:10:00,960 --> 00:10:07,920
And finally, if we bring in now the last one, it will be either on cycles or Celestis Prince epiphenomenal

175
00:10:07,950 --> 00:10:08,640
share what I mean.

176
00:10:08,820 --> 00:10:13,980
So when I click this on eBay and like LoDo, you can see now I can rotate round and you can see exactly

177
00:10:13,980 --> 00:10:16,560
what you're doing and it moves basically in real time.

178
00:10:16,560 --> 00:10:22,410
So it's rendering out in real time like you would do in an actual game or something like that in the

179
00:10:22,410 --> 00:10:22,890
Komova.

180
00:10:22,890 --> 00:10:24,420
And I put this on cycles.

181
00:10:24,600 --> 00:10:29,390
You'll see now it's very grainy and it takes a little bit of time to actually load up.

182
00:10:29,550 --> 00:10:35,610
Now, the more complex I've seen on cycles, when you're on the shader, it will take much, much longer.

183
00:10:35,790 --> 00:10:37,020
You can turn this down.

184
00:10:37,020 --> 00:10:38,820
We say it says viewport.

185
00:10:38,940 --> 00:10:42,420
And this basically is a number of samples that it's actually trying to sample.

186
00:10:42,420 --> 00:10:47,940
So if I put this on, one is going to be very, very grainy, but it is going to render out Narino straightaway.

187
00:10:48,030 --> 00:10:49,370
So I'm going to leave that on there.

188
00:10:49,380 --> 00:10:50,100
Thirty two.

189
00:10:50,190 --> 00:10:54,480
I'm just giving you that option just in case your computer is a bit slower than mine.

190
00:10:54,660 --> 00:10:56,820
So let's for now put this back on TV.

191
00:10:56,830 --> 00:10:59,370
I'm going to bring in an actual light source now.

192
00:10:59,370 --> 00:11:05,780
I want to bring in my light source in the center so I want to shift s cursor to world origin and then

193
00:11:05,780 --> 00:11:09,330
my guess then appears right in the center of the blender viewport.

194
00:11:09,540 --> 00:11:14,010
And I want to press a come down and you'll see one that saves lives.

195
00:11:14,100 --> 00:11:16,470
And the one we're going to bring in is the sun.

196
00:11:16,470 --> 00:11:17,610
So let's bring in the sun.

197
00:11:18,270 --> 00:11:22,440
And you'll notice already that we've actually got some kind of light appearing on this.

198
00:11:22,680 --> 00:11:25,590
Let's again press spaceball to bring in our move tool.

199
00:11:25,740 --> 00:11:30,000
And then what we're going to do is going to position also now the sun is an infinite light source.

200
00:11:30,000 --> 00:11:34,710
So it doesn't matter where you put it, the light will just travel and travel, unlike things.

201
00:11:35,220 --> 00:11:40,590
Spotlights will travel a certain amount of distance and then it'll start to actually fade away like

202
00:11:40,590 --> 00:11:44,420
a candle because you can't see a candle from 20 miles away or something like that.

203
00:11:44,520 --> 00:11:46,380
But the sun you can always actually see.

204
00:11:46,560 --> 00:11:48,140
So let's now play across.

205
00:11:48,570 --> 00:11:52,800
Let's pull it up and let's actually rotate it and give it some nice angle.

206
00:11:52,820 --> 00:11:54,630
So we will change this in the future.

207
00:11:54,630 --> 00:12:01,410
But we'll just do this amount less, press all X and let's just pull it with the mouse and rotates it

208
00:12:01,410 --> 00:12:01,710
round.

209
00:12:01,710 --> 00:12:06,600
And you'll see, as we did, that they start to get light up then and said, well, let's just turn

210
00:12:06,600 --> 00:12:06,990
it round.

211
00:12:06,990 --> 00:12:11,730
And you can see now that we've got a little bit of shadow where the sun is actually bouncing in this

212
00:12:11,730 --> 00:12:14,460
part, causing this to be an actual shadow.

213
00:12:14,580 --> 00:12:17,730
So you can see already it's looking much, much nicer now.

214
00:12:17,730 --> 00:12:23,280
We needed this up basically, so we can bring in our material and actually see what's going on as we're

215
00:12:23,280 --> 00:12:24,330
applying our materials.

216
00:12:24,510 --> 00:12:25,080
So that's it.

217
00:12:25,090 --> 00:12:28,140
And this one on the next lesson will start to apply all materials.

218
00:12:28,140 --> 00:12:29,740
And I hope you're really enjoying it so far.

219
00:12:29,940 --> 00:12:30,600
See you on the next one.

220
00:12:31,020 --> 00:12:31,620
Thanks a lot.

221
00:12:31,650 --> 00:12:32,030
Bye bye.
