1
00:00:09,830 --> 00:00:15,230
Welcome back, everyone, to 3D modeling The Hobbit doll scene with Blender two point nine and Adobe

2
00:00:15,230 --> 00:00:15,900
Photoshop.

3
00:00:16,070 --> 00:00:17,810
So this is where we left off.

4
00:00:18,020 --> 00:00:22,920
So now what I actually want to do is I need to create a wood that's actually going to go around there.

5
00:00:23,030 --> 00:00:25,130
I would like to bring in some better light.

6
00:00:25,130 --> 00:00:29,040
And just so we can have a really good visual direction, what we're going to do.

7
00:00:29,180 --> 00:00:34,520
I think the first thing, though, that we need to do is we need to round off these little these edges

8
00:00:34,520 --> 00:00:35,120
a little bit.

9
00:00:35,240 --> 00:00:38,090
They're a little bit too hard edged at the moment.

10
00:00:38,090 --> 00:00:43,280
And they don't look that realistic because generally this will be made out of something like led Hamade

11
00:00:43,280 --> 00:00:48,350
in place and then have lots of kind of bumps and then things and there will be much more rounded.

12
00:00:48,500 --> 00:00:53,240
So first of all, let's come up and put it on material and then what we're going to do is going to click

13
00:00:53,240 --> 00:00:53,650
on them.

14
00:00:53,660 --> 00:00:55,060
Press top a moment.

15
00:00:55,070 --> 00:00:58,940
There is I'm actually going to grab one of them, so I'd select grab one of them.

16
00:00:59,390 --> 00:01:06,350
And now you could go around trying to grab all these, but that would be it'll take a long time, very

17
00:01:06,350 --> 00:01:07,190
time consuming.

18
00:01:07,190 --> 00:01:09,800
So we don't want to do anything that makes the job easier.

19
00:01:09,980 --> 00:01:15,860
That's why I want to do so much to select and come down, which says Select sharp edges and you'll notice

20
00:01:15,860 --> 00:01:18,040
it grabs all those sharp edges us.

21
00:01:18,050 --> 00:01:19,470
And that's exactly what we want.

22
00:01:19,610 --> 00:01:24,530
Now, I'm just looking here and just making sure so I can see they've got sharp edges round here, here

23
00:01:24,530 --> 00:01:24,980
and here.

24
00:01:25,850 --> 00:01:32,540
And what I'm wondering is if I actually want to take these off, for instance, do I want these edges

25
00:01:33,110 --> 00:01:34,340
actually beveled as well?

26
00:01:34,500 --> 00:01:35,980
I'm not sure yet.

27
00:01:35,990 --> 00:01:38,660
So let's just bevell them up a little bit and see if it looks like.

28
00:01:38,750 --> 00:01:40,310
So I'm going to do is I want to press control.

29
00:01:40,310 --> 00:01:43,310
B, I'm going to drag it out very, very slowly.

30
00:01:43,490 --> 00:01:47,810
Now, if you want to drag it out really slowly, hold the chiffon down and drag it out.

31
00:01:47,810 --> 00:01:50,920
And you'll see then that it's really, really controlled if you do that.

32
00:01:51,050 --> 00:01:56,270
So I'm going to drag it out just a little bit on the left, drop that in place, and then let's have

33
00:01:56,270 --> 00:01:58,040
a look what actually looks like.

34
00:01:58,130 --> 00:01:59,000
And you can see.

35
00:02:00,120 --> 00:02:06,450
If we go all the way around that, that looks much, much nicer, way nicer than we did before, they

36
00:02:06,450 --> 00:02:07,260
find a place up there.

37
00:02:07,300 --> 00:02:09,980
Now you can see that look really, really smooth.

38
00:02:10,110 --> 00:02:11,610
And that's exactly what we're looking for.

39
00:02:11,940 --> 00:02:12,450
All right.

40
00:02:12,450 --> 00:02:19,740
So the next thing I think on our list is to go back to Modlin and let's bring in the eye, which basically

41
00:02:19,740 --> 00:02:25,250
is a image which we use as our actual environment.

42
00:02:25,380 --> 00:02:27,080
And what it does is HDR right.

43
00:02:27,120 --> 00:02:30,500
Especially actually created to bring in the lighting with it.

44
00:02:30,600 --> 00:02:35,250
So it could be a mountain scene with a song, an actual song, and all the glint of the mountain and

45
00:02:35,250 --> 00:02:38,000
things like that will actually come into your scene.

46
00:02:38,130 --> 00:02:39,780
So I'll show you exactly what I mean.

47
00:02:40,170 --> 00:02:47,910
If I put this back on TV or computer cycles, put it on our TV shader, let's pressel to bring everything

48
00:02:47,910 --> 00:02:48,240
back.

49
00:02:48,270 --> 00:02:52,140
If it doesn't come back to questionmark, then we go everything back.

50
00:02:52,410 --> 00:02:55,380
I want to keep my cube there just so I can have a good visualization.

51
00:02:55,380 --> 00:03:01,320
What this looks like and the moment they bring him HDR right is come over to this little will the icon

52
00:03:01,710 --> 00:03:04,040
click on that and you can see it comes in as well.

53
00:03:04,140 --> 00:03:06,540
And this basically is the background of the moment.

54
00:03:06,660 --> 00:03:09,620
As you can see, it's gray, it's boring.

55
00:03:10,140 --> 00:03:11,130
We want something better.

56
00:03:11,280 --> 00:03:15,090
So let's come over where he says color click on this little yellow icon here.

57
00:03:15,660 --> 00:03:21,600
Come over to environment texta, click on and it will go paint like that.

58
00:03:21,840 --> 00:03:25,930
That's because there's no actual texture environment here at the moment.

59
00:03:26,190 --> 00:03:27,630
Now let's come over to open.

60
00:03:28,380 --> 00:03:29,360
Let it OK.

61
00:03:29,850 --> 00:03:33,630
Now, within your downloads, you will have one that says actual textures.

62
00:03:33,630 --> 00:03:37,170
And when a double click this, you'll see I've only got two in there at the moment.

63
00:03:37,170 --> 00:03:40,120
But you'll see as the course goes on, this will be more populated.

64
00:03:40,150 --> 00:03:43,980
So so that when you come to actually employ your textures, they'll all be in here.

65
00:03:43,980 --> 00:03:45,040
So don't worry about that.

66
00:03:45,240 --> 00:03:51,540
So here we are, Hajari map, and you'll know that in previous courses I've used this particular one.

67
00:03:51,570 --> 00:03:52,650
I use it a lot.

68
00:03:52,650 --> 00:03:56,640
And the reason is because it's a very, very nice Haydari.

69
00:03:56,730 --> 00:04:01,030
You're more than welcome once you know how to actually do this, to go and grab your own HDI.

70
00:04:01,080 --> 00:04:03,750
Our eyes, there's a lot free on the Internet.

71
00:04:03,750 --> 00:04:07,110
Just grab them and bring them in exactly the same way as we're going to do here.

72
00:04:07,260 --> 00:04:12,450
So I'm going to double click on there and you'll see when I've done that that there is the HDR.

73
00:04:12,450 --> 00:04:12,840
Right.

74
00:04:12,870 --> 00:04:17,040
And you can see now it looks completely different from what it did before.

75
00:04:17,220 --> 00:04:21,540
Now, the thing is, you can turn this down so you can affect the lighting, how bright it is.

76
00:04:21,630 --> 00:04:28,980
So this makes with the actual song that we have should give us now a really, really good representation

77
00:04:28,980 --> 00:04:31,020
of what our actual scene's going to look like.

78
00:04:31,140 --> 00:04:35,130
Now, let's put this back on cycles so we have a good idea.

79
00:04:36,000 --> 00:04:36,840
And there we go.

80
00:04:36,960 --> 00:04:41,460
Now, you can see that this may be a little bit bright at the moment, but the thing that you have to

81
00:04:41,460 --> 00:04:45,870
remember is that at the moment we haven't messed around with the lighting or anything like that.

82
00:04:46,050 --> 00:04:48,690
So I wouldn't mess around with this too much at this stage.

83
00:04:48,900 --> 00:04:55,950
OK, so now about saying let's actually come and actually create all edging around this actual window.

84
00:04:56,070 --> 00:05:02,220
So again, we're to do them, first of all, going to make sure that my cursor is actually in the center

85
00:05:02,220 --> 00:05:02,670
of this.

86
00:05:02,670 --> 00:05:04,890
So I'm going to grab this glass.

87
00:05:05,010 --> 00:05:08,370
I'm going to come around to the outside zone and grab this outside.

88
00:05:08,400 --> 00:05:14,280
So, OK, shifting click like so I want to press ship s because it's selected and that's going to put

89
00:05:14,280 --> 00:05:16,260
my case bang in the center there.

90
00:05:16,350 --> 00:05:23,020
And hopefully now when I bring in my actual cylinder it should come in right in the center.

91
00:05:23,020 --> 00:05:25,230
It might be a little bit out but we'll actually see.

92
00:05:25,350 --> 00:05:31,110
So let's press shift a mesh, come down where it's a cylinder and let's bring it in now.

93
00:05:31,110 --> 00:05:40,380
Let's spin around so all Y ninety Z ninety s to scale it down, make it smaller and let's get it into

94
00:05:40,380 --> 00:05:41,730
some sort of size.

95
00:05:41,730 --> 00:05:49,100
This so I want to press X and Y and scale it in like so let's bring it out to the back of it, let's

96
00:05:49,110 --> 00:05:54,920
press s like so and what I'm looking for is just having a look, see if it's actually fit.

97
00:05:54,940 --> 00:05:59,730
If I press one on the normal pad, you can see now it's really, really fits in nicely round there.

98
00:05:59,880 --> 00:06:03,620
Albay I think I want it a little bit bigger, something like that now.

99
00:06:03,630 --> 00:06:07,750
And if it gets something I we'll show you quickly, just so you know, proper.

100
00:06:07,910 --> 00:06:13,530
Should they again mesh cylinder, you'll see that this is the moment comes in.

101
00:06:13,560 --> 00:06:16,830
So I come down here on the bottom left hand side, you've got a little menu.

102
00:06:17,070 --> 00:06:20,820
Now, this tells you how many that he says around this side.

103
00:06:20,910 --> 00:06:23,190
In other words, how many faces are on the inside.

104
00:06:23,340 --> 00:06:26,130
Now, when a brother in I left it on thirty two.

105
00:06:26,400 --> 00:06:31,740
Again, this is something that you should bear in mind if you want to keep the polygon count down or

106
00:06:31,740 --> 00:06:36,900
you want to save on resources, for instance, to be taken into games engine and you've got a load of

107
00:06:36,900 --> 00:06:39,720
cylinders, you don't want them all that too.

108
00:06:39,990 --> 00:06:44,490
I recommend between 12 and 20 sides is what you should be using.

109
00:06:44,580 --> 00:06:48,090
And the reason for that is the low enough to still get this roundness.

110
00:06:48,090 --> 00:06:53,280
What I mean is if I turn this down to twenty, you will see that if I showed smooth.

111
00:06:54,550 --> 00:07:01,060
Little triangle, also schmoo, that if I look around here now, you can see the still looks relatively

112
00:07:01,060 --> 00:07:01,490
smooth.

113
00:07:01,690 --> 00:07:06,520
Now, if I brought this in and brought this down to eight sides or something like that, you would really

114
00:07:06,520 --> 00:07:10,020
look what you'd really start to get really chunky look.

115
00:07:10,120 --> 00:07:11,230
And not on this same.

116
00:07:11,230 --> 00:07:14,430
We're looking for realism, not actually stylizing.

117
00:07:14,440 --> 00:07:16,010
So it's not actually something moving.

118
00:07:16,240 --> 00:07:20,440
So now about to explain, Leslie, though, the way we're going to do is when to come back to our world.

119
00:07:20,590 --> 00:07:27,740
Now we can see that we want this glass not to be on top of the world, one glass to still be see through.

120
00:07:27,850 --> 00:07:29,260
So let's fix that now.

121
00:07:29,290 --> 00:07:31,660
So the first thing on Wednesday, I went to grab my son.

122
00:07:32,900 --> 00:07:39,440
Come in with face, like grubbiness from Pasir among industries, then went to press, I am bringing

123
00:07:39,440 --> 00:07:41,880
in Jills to this point here.

124
00:07:42,050 --> 00:07:48,590
Now, if you can't see this point here, just come up and put it on wireframe and now you can see where

125
00:07:48,620 --> 00:07:50,150
brother into the news.

126
00:07:50,150 --> 00:07:53,240
I'm going to price controls that just to go back and then would show you.

127
00:07:53,250 --> 00:07:55,880
I mean, so if I press I want to bring it in.

128
00:07:56,030 --> 00:08:02,780
And what I wanted to do is be halfway on that piece of metal by the start of the frame of this actual

129
00:08:02,780 --> 00:08:06,140
bed or something like that, maybe even less, a little bit to fall.

130
00:08:06,230 --> 00:08:07,730
Just press as if it is.

131
00:08:07,880 --> 00:08:11,180
Then let's bring it out a little bit more close to the actual edge.

132
00:08:11,180 --> 00:08:17,280
And you can see in mine be fitting in so we can fix that, but we just need to get a start to it.

133
00:08:17,480 --> 00:08:19,070
Now, let's bring back the material.

134
00:08:19,310 --> 00:08:22,840
And what are we going to do now is we're just going to keep this part here.

135
00:08:22,850 --> 00:08:24,290
We're going to get rid of the rest of it.

136
00:08:24,440 --> 00:08:32,330
So I'll come in with a select a face shifting click to grab all of those going around there and pay

137
00:08:32,510 --> 00:08:34,670
to actually separate from the rest of the mesh.

138
00:08:34,680 --> 00:08:37,820
So selection top grab the back of it.

139
00:08:37,850 --> 00:08:40,260
Press delete faces and go.

140
00:08:40,400 --> 00:08:41,590
Now you can see through it.

141
00:08:41,960 --> 00:08:43,730
Now, let's see where this is going to be.

142
00:08:43,730 --> 00:08:49,640
So we're going to grab it, pull it forward like so we can see now we've got that malegaon all the way

143
00:08:49,640 --> 00:08:50,060
around.

144
00:08:50,150 --> 00:08:52,760
And now I actually want to create this into the wood.

145
00:08:52,850 --> 00:08:56,690
I also need to decide on how I think this was going to be.

146
00:08:56,720 --> 00:08:58,790
And at the moment, to be honest, is looking a bit thin.

147
00:08:58,910 --> 00:09:05,540
So let's press the one on the normal press tab and select a shift and press the ASP and bring it out

148
00:09:05,540 --> 00:09:06,680
a little bit like so.

149
00:09:06,860 --> 00:09:08,980
And now let's grab it all with Al.

150
00:09:09,140 --> 00:09:13,670
And what I'm gonna do is I'm going to pull it back so E for Extrude, pull it back.

151
00:09:13,760 --> 00:09:16,940
Now, if it's not going along that line, press the wide button.

152
00:09:16,940 --> 00:09:22,970
And what I mean is it will actually fix to the actual axis and be able to pull back really nicely.

153
00:09:23,060 --> 00:09:24,500
So let's pull it back like so.

154
00:09:24,640 --> 00:09:31,640
And I can say got a really, really nice start to the actual wood Paul that's going to go around this

155
00:09:31,640 --> 00:09:32,710
actual stained glass.

156
00:09:32,840 --> 00:09:36,010
Now the one thing you can see is it's a little bit out.

157
00:09:36,020 --> 00:09:38,600
It needs pulling forward a little bit and probably a little bit.

158
00:09:38,600 --> 00:09:39,860
And so let's get that fixed.

159
00:09:39,860 --> 00:09:45,080
So first of all, we'll grab everything with our I want to press shifts baseball to bring in my move

160
00:09:45,080 --> 00:09:47,840
to OK, I want to move it forward like so.

161
00:09:48,440 --> 00:09:53,900
And then I'm just looking to see if I can see actually any glass through here, which I can in the press

162
00:09:53,900 --> 00:09:54,230
one.

163
00:09:54,560 --> 00:09:58,100
So well, once there is, I'm going to try and level it up just a little bit.

164
00:09:58,220 --> 00:10:05,510
So we're going to pull it over just a tiny bit like so I want to pull it up a little bit like so and

165
00:10:05,510 --> 00:10:08,240
then when to make it slightly smaller again.

166
00:10:08,450 --> 00:10:15,080
Perciasepe the to hold the ship on down just have a lot of control over it and you just want this metal

167
00:10:15,080 --> 00:10:20,300
part of the engine just actually come in actually in front of the actual wall.

168
00:10:20,660 --> 00:10:22,650
OK, so it should look something like that.

169
00:10:22,790 --> 00:10:26,840
So what we're going to do on the next lesson is we're going to finish up this with a mop the seams and

170
00:10:26,840 --> 00:10:31,250
shops and things like that and actually get the wood onto this actual object.

171
00:10:31,400 --> 00:10:34,250
OK, once I hope you enjoyed that and I'll see you on the next one.

172
00:10:34,370 --> 00:10:35,030
Thanks a lot.

173
00:10:35,030 --> 00:10:35,470
Bye bye.
