1
00:00:09,980 --> 00:00:14,990
Welcome back, everyone, to 3D modelling, a Hobbit doll scene with blended two point nine and Adobe

2
00:00:14,990 --> 00:00:17,000
Photoshop, and this is where we left off.

3
00:00:17,300 --> 00:00:20,360
Now we're going to work on Ortman Ordell next.

4
00:00:20,360 --> 00:00:24,290
But first of all, let's just take a quick look at our Qadim panel.

5
00:00:24,440 --> 00:00:25,430
So we go to Qadim.

6
00:00:25,430 --> 00:00:28,230
One thing I need to explain is the map.

7
00:00:28,270 --> 00:00:33,800
So if we come to the first map, I'm also going to pull a description down the bomb right inside it

8
00:00:33,830 --> 00:00:35,240
to say exactly what they do.

9
00:00:35,360 --> 00:00:38,170
So the first one you notice that we brought in is the base color.

10
00:00:38,300 --> 00:00:44,120
And this is what it says on the tin is basically the color of the wood, all the little grains and things

11
00:00:44,120 --> 00:00:44,620
like that.

12
00:00:44,690 --> 00:00:46,990
And then it plugs into the base color of the principal.

13
00:00:47,240 --> 00:00:52,070
Next one down is a metallic anomaly with metallic katiba is metallic or isn't metallic.

14
00:00:52,070 --> 00:00:53,540
There isn't really anything in between.

15
00:00:53,720 --> 00:00:59,270
So when you actually use metallic evaporate on one or zero, depending on if you want it to be metal

16
00:00:59,270 --> 00:01:01,510
on the next one down is rockiness.

17
00:01:01,520 --> 00:01:05,720
And this is basically, if you think of a window and you think of all the grime and things like that,

18
00:01:05,810 --> 00:01:11,600
it interacts with the light zila of light bouncing off the light obaidullah in certain places, and

19
00:01:11,600 --> 00:01:14,510
it will shine a lot clearer if the glass is clean, for instance.

20
00:01:14,510 --> 00:01:16,880
And that is basically what the roughness controls.

21
00:01:17,180 --> 00:01:22,940
Next one down we have the normal mop and the normal mop is basically all of these bombs that you see

22
00:01:22,940 --> 00:01:24,340
on here on this metal.

23
00:01:24,440 --> 00:01:30,110
It basically controls how much of a 3D lobet the actual texture will have.

24
00:01:30,530 --> 00:01:36,480
And you can actually bring that out so much that it actually looks kind of ridiculous in some ways.

25
00:01:36,500 --> 00:01:41,450
So you just need to be take your time and have a look and make sure that it's controlled correctly and

26
00:01:41,450 --> 00:01:43,280
make sure that it's just not set too high.

27
00:01:43,640 --> 00:01:50,810
Next one down is displacement and displacement basically is used for if you want to bring in some extra

28
00:01:50,810 --> 00:01:56,540
high or extra detail, there is something called tessellation, which you're welcome to look up and

29
00:01:56,540 --> 00:01:57,460
use in tessellation.

30
00:01:57,480 --> 00:02:02,300
You really, really expand how 3-D an actual texture looks.

31
00:02:02,390 --> 00:02:07,850
So it's basically similar to the normal map, except it's a lot more refined and it's only used in kind

32
00:02:07,850 --> 00:02:09,560
of specialized circumstances.

33
00:02:09,800 --> 00:02:14,840
OK, so with all that done, let's now head on back over to modeling and what we're going to do is we're

34
00:02:14,840 --> 00:02:17,220
going to bring in a cylinder.

35
00:02:17,330 --> 00:02:19,910
So first of all, though, let's put this right in the middle.

36
00:02:20,070 --> 00:02:23,360
So I'll want to do is I want to join this on this one menageries.

37
00:02:23,360 --> 00:02:30,260
And when I click the metal, click the glass, press control J and when to come over to my little triangle,

38
00:02:30,260 --> 00:02:33,380
because you notice now it's actually gone a bit funky.

39
00:02:33,380 --> 00:02:35,690
And that is because the ultra smooth has been turned off.

40
00:02:35,840 --> 00:02:40,490
And now finally, I'm going to join the glass with the world press in control.

41
00:02:40,760 --> 00:02:44,300
And you can see that it's gone like this again.

42
00:02:44,300 --> 00:02:49,250
What we need to do to actually fix this is just press control and then grab the Woodford's, then the

43
00:02:49,250 --> 00:02:54,070
glass, then press control, and now you'll notice it goes together really nicely.

44
00:02:54,260 --> 00:02:55,670
OK, so I'm happy with that.

45
00:02:55,670 --> 00:03:00,650
So I need to do now is put this in the center and that's going to make it much, much easier to actually

46
00:03:00,650 --> 00:03:01,100
work with.

47
00:03:01,490 --> 00:03:07,700
So less pressure s because it's Weld origin and then now we need to move this overpressure shift again

48
00:03:07,700 --> 00:03:08,930
and you'll notice you go in here.

49
00:03:08,940 --> 00:03:11,810
Same selection to click that on the night.

50
00:03:11,810 --> 00:03:13,480
You'll see it drops right in the middle.

51
00:03:13,760 --> 00:03:16,190
Now, I'm not sure about scaling at the moment.

52
00:03:16,190 --> 00:03:18,350
I think we should be OK keeping it at this scale.

53
00:03:18,470 --> 00:03:20,850
The one thing I do need to do, though, is actually bring you.

54
00:03:21,020 --> 00:03:22,340
So I'm going to bring you that.

55
00:03:22,430 --> 00:03:26,660
I'm going to move the cube behind it just so I've got a reference to actually see behind.

56
00:03:26,840 --> 00:03:29,180
And that would be handy up until near the end.

57
00:03:29,180 --> 00:03:30,860
I'm going to move a little bit closer as well.

58
00:03:32,100 --> 00:03:36,930
OK, so now let's bring in the actual dollar, Freeman, So are we going to do is bring in a primitive

59
00:03:36,930 --> 00:03:42,910
so shift a mash, come up to, say, a cylinder, and this time we are going to keep this on 32.

60
00:03:43,020 --> 00:03:43,940
I recommend doing that.

61
00:03:43,950 --> 00:03:50,460
And the reason is because I've looked and saw how we can split this door up into wooden panels and 32

62
00:03:50,460 --> 00:03:51,720
seems to fit it very well.

63
00:03:51,930 --> 00:03:55,410
So now let's spin it round with all an X and 90.

64
00:03:55,530 --> 00:03:56,880
So it's based in the correct way.

65
00:03:56,970 --> 00:03:58,290
And then let's bring it all.

66
00:03:59,200 --> 00:04:05,800
And back and basically, you've got to imagine that this is the door and how is this piece of glass

67
00:04:05,920 --> 00:04:07,710
stained glass going to fit within our door?

68
00:04:07,810 --> 00:04:10,360
And you can see at the moment this is way, way too big.

69
00:04:10,390 --> 00:04:12,190
So we need to bring our Daubert.

70
00:04:13,280 --> 00:04:19,220
Pull it back and now just visualize, I'm going to pull it down a little bit like so how this is going

71
00:04:19,220 --> 00:04:23,900
to set within the actual door and I think I need to move them both up a little bit.

72
00:04:23,910 --> 00:04:24,880
So I want to press one.

73
00:04:24,890 --> 00:04:25,940
I want to bring them up.

74
00:04:26,060 --> 00:04:30,980
And the reason I'm going to do that is because I also need to think about where all these wooden panels

75
00:04:30,980 --> 00:04:32,050
are going to come down to.

76
00:04:32,180 --> 00:04:35,620
And I think somewhere around here should be absolutely fine.

77
00:04:35,630 --> 00:04:36,600
So somewhere like here.

78
00:04:37,040 --> 00:04:41,690
Now, once you're happy with it and you're happy with the size, you can imagine the wooden panels going

79
00:04:41,690 --> 00:04:42,280
down here.

80
00:04:42,650 --> 00:04:48,830
And then you've got the archway as a reference that you can download with the calls, shows you you've

81
00:04:48,830 --> 00:04:51,960
got the kind of the rock arch going around here.

82
00:04:51,980 --> 00:04:54,260
You just make sure, like I say, they are happy with this.

83
00:04:54,530 --> 00:04:58,910
Now, next thing I want to do is I want to actually delete these faces on the back.

84
00:04:58,910 --> 00:05:01,280
So all you need to do in comes to the back face.

85
00:05:01,310 --> 00:05:06,890
Click on it, press control and plus on the number pad and then that will increase the selection.

86
00:05:07,020 --> 00:05:10,650
You can also press control a minus and that will decrease the selection.

87
00:05:10,880 --> 00:05:11,960
Now let's delete these.

88
00:05:11,970 --> 00:05:15,530
So we're going to press delete basis and that's going to get rid of all those.

89
00:05:16,010 --> 00:05:18,610
Next thing I want to do is I need to cut this away.

90
00:05:18,770 --> 00:05:23,620
So at the moment I don't want to fully round all because obviously it wouldn't open very well.

91
00:05:23,630 --> 00:05:28,640
You can have a fully round one if you want, but prefer actually to be a bottom on the doll as again,

92
00:05:28,640 --> 00:05:36,050
in the reference you'll also see here that you can see the mesh from the glass and from the actual doorframe.

93
00:05:36,050 --> 00:05:39,220
And I don't really want this just because I've got both of them selected.

94
00:05:39,350 --> 00:05:41,510
So let me just select the actual doll frame.

95
00:05:41,750 --> 00:05:44,830
I'm going to press one again just to make sure I'm happy with it.

96
00:05:44,870 --> 00:05:45,840
I want to press tab.

97
00:05:45,920 --> 00:05:48,230
I'm going to do now is going to delete this space.

98
00:05:48,230 --> 00:05:53,480
I want to press, delete and come down to only faces and now should be left with this.

99
00:05:54,500 --> 00:06:00,440
Now, let's refill, they said, but I want to refill it in a way that makes it so I can actually make

100
00:06:00,440 --> 00:06:04,580
the wooden panels, so I'm going to do that as I want to press olt shifting plate just to grab them

101
00:06:04,580 --> 00:06:04,810
all.

102
00:06:04,970 --> 00:06:11,180
And then when a minus assault the two on each side of the edges like so and then you're going to click

103
00:06:11,180 --> 00:06:17,600
right click and then come up to essay's bridge and this thing is going to bridge all the loose opposite

104
00:06:17,600 --> 00:06:18,250
each other.

105
00:06:18,440 --> 00:06:23,780
You actually need to leave a gap in between this side and this side to actually use bridgeheads loops

106
00:06:23,960 --> 00:06:29,360
where you can see now that we've actually got the panels for adults, all we need to do is just fill

107
00:06:29,360 --> 00:06:30,630
in these parts here.

108
00:06:31,070 --> 00:06:32,540
OK, so let's fill these in.

109
00:06:32,540 --> 00:06:33,740
So we'll come to this one first.

110
00:06:33,740 --> 00:06:37,940
No, we're going to do is just grab each of these edges and press the button, and that's just going

111
00:06:37,940 --> 00:06:38,850
to fill it in for us.

112
00:06:38,900 --> 00:06:41,270
Now, let's come to the other side and do exactly the same thing.

113
00:06:41,280 --> 00:06:43,190
So and there we go.

114
00:06:43,340 --> 00:06:43,730
All right.

115
00:06:43,740 --> 00:06:48,500
So this looks a good start toward the next one I want to do is I want to cut this piece across here

116
00:06:48,650 --> 00:06:51,000
on along this red line pretty much.

117
00:06:51,020 --> 00:06:54,380
And the reason is, as I say, I want this doll to actually have a bottom on it.

118
00:06:54,530 --> 00:06:59,960
So I'm going to do is when I press a I'm going to grab everything and come up to this mesh bone here,

119
00:07:00,530 --> 00:07:02,900
come down and you'll have one that says bicep.

120
00:07:03,170 --> 00:07:07,610
And what you need to do now is with the basic once you've actually clicked that on, is actually ready

121
00:07:07,610 --> 00:07:08,050
to go.

122
00:07:08,210 --> 00:07:13,290
So you won't be able to zoom round or anything like that until you've actually used it.

123
00:07:13,370 --> 00:07:17,330
So just make sure you're in the position that you want to be before you use it.

124
00:07:17,510 --> 00:07:18,440
Now, let's come in.

125
00:07:18,900 --> 00:07:20,540
I want to come to this red line.

126
00:07:20,630 --> 00:07:25,640
I'm going to drive across to the other side like so and you'll notice an actual capias.

127
00:07:25,820 --> 00:07:30,190
Next thing you want to do is come down to where this menu is.

128
00:07:30,200 --> 00:07:35,750
So just open this menu and you'll see here about this plane, Axis X, that should be this X is going

129
00:07:35,750 --> 00:07:36,350
across there.

130
00:07:36,470 --> 00:07:40,700
If I click on that, you'll see it's no point nought one zero.

131
00:07:40,760 --> 00:07:44,040
So I'm going to click on it and just set this to zero miles.

132
00:07:44,060 --> 00:07:48,710
That's going to do is it's going to level it up perfectly along the X axis.

133
00:07:48,830 --> 00:07:55,220
You can also pull it up now and actually make the call in a different place and I'll show you how we

134
00:07:55,220 --> 00:07:55,690
close it.

135
00:07:56,000 --> 00:08:01,250
So now we've got in the perfect place, all we do is we come down and leave it in the arena or play

136
00:08:01,250 --> 00:08:01,490
around.

137
00:08:01,550 --> 00:08:02,810
It's over like this one, though.

138
00:08:02,840 --> 00:08:06,110
You'll see that cuts it away in a really, really nice way.

139
00:08:06,290 --> 00:08:09,650
And the reason why we set this desire is to make sure it's perfectly flat.

140
00:08:09,740 --> 00:08:12,470
You can also play the outside if you wanted as well.

141
00:08:12,470 --> 00:08:13,970
So let's just play the inner light.

142
00:08:13,970 --> 00:08:16,910
So now once you've done that, just make sure you're happy with it.

143
00:08:16,910 --> 00:08:17,660
You can move around.

144
00:08:17,660 --> 00:08:18,710
Now, you've actually made the call.

145
00:08:18,800 --> 00:08:20,390
You can still move it up and down.

146
00:08:20,960 --> 00:08:22,010
I'm going to leave it like that.

147
00:08:22,010 --> 00:08:23,120
I'm pretty happy with that.

148
00:08:23,120 --> 00:08:27,710
So I'm going to do now is work on this actual stone arch that's going around here.

149
00:08:27,890 --> 00:08:31,000
So I'm going to do is I'm going to grab all of the sides going around.

150
00:08:31,010 --> 00:08:36,440
So want to press shift and click and then I'm going to come to this one per shift, click control click,

151
00:08:36,650 --> 00:08:39,290
come to this side shift, click, control, click.

152
00:08:39,410 --> 00:08:44,870
And then I'm going to do is I'm actually going to duplicate just this edge going around and that's going

153
00:08:44,870 --> 00:08:47,150
to give me them something to actually work with.

154
00:08:47,270 --> 00:08:53,780
So if I press shift and just press enter and then pull this out, you'll see that you've duplicated

155
00:08:53,780 --> 00:08:56,680
just this edge away from this actual wooden door.

156
00:08:56,900 --> 00:08:58,820
Now let's press page separates out.

157
00:08:58,820 --> 00:09:00,230
So pay selection.

158
00:09:01,130 --> 00:09:06,230
And then what we're going to do is going to press top and then click back on this edge here and now

159
00:09:06,230 --> 00:09:08,930
is completely separated out from the actual door.

160
00:09:09,290 --> 00:09:10,280
Next voluntaries.

161
00:09:10,280 --> 00:09:13,160
I just want to reset the orientation just in case I want to move this.

162
00:09:13,250 --> 00:09:15,900
So control all transforms, right.

163
00:09:15,930 --> 00:09:18,160
Click So origin to geometry.

164
00:09:18,770 --> 00:09:20,090
Now on the next one, what are we going to do?

165
00:09:20,090 --> 00:09:24,830
Is going to work on bringing this out, extruding out, and we're going to use some modifiers to actually

166
00:09:24,830 --> 00:09:27,440
make this the correct look that we're looking for.

167
00:09:27,680 --> 00:09:29,390
OK, everyone, once I hope you enjoyed that.

168
00:09:29,390 --> 00:09:30,410
And I'll say on the next one.

169
00:09:30,560 --> 00:09:31,140
Thanks a lot.

170
00:09:31,160 --> 00:09:31,610
Bye bye.
