1
00:00:10,040 --> 00:00:15,590
Welcome back, everyone, to 3D Modeling Obaidullah scene with Blend two point nine and Adobe Photoshop.

2
00:00:15,890 --> 00:00:17,390
Now this is where we left off.

3
00:00:17,420 --> 00:00:24,180
So what I want to do now is I want to go into any so I have the selected press, the tabloid press aide

4
00:00:24,200 --> 00:00:28,430
to grab everything and then press E and what are you going to do is you want to pull it out along the

5
00:00:28,430 --> 00:00:29,170
Y axis.

6
00:00:29,180 --> 00:00:33,560
So press the button straight up, then you're going to pull it out like so.

7
00:00:33,680 --> 00:00:38,430
And now what I can do is I can actually grab it all without I want to pull it back into place and then

8
00:00:38,430 --> 00:00:41,000
I get a good idea of actually what it's going to look like.

9
00:00:41,480 --> 00:00:47,120
So now we need to actually give this some depth is just a 2D cylinder at the moment, and that's not

10
00:00:47,330 --> 00:00:49,040
very useful for what we need.

11
00:00:49,190 --> 00:00:50,870
So what we'll do is we'll press a top.

12
00:00:52,050 --> 00:01:00,210
Again, we'll reset the transformation's, so control all transforms, right, Plake origin to geometry.

13
00:01:00,660 --> 00:01:05,410
OK, so now let's come over to modify stop this little Sponer again, add, modify it.

14
00:01:05,520 --> 00:01:11,370
And this time we're going to bring in a solidify and now they solidify based on what it does is if I

15
00:01:11,370 --> 00:01:16,830
pull this to the right hand side or the left hand side, you can say I can pull it out and it pulls

16
00:01:16,830 --> 00:01:19,620
it out really, really even along here.

17
00:01:19,770 --> 00:01:24,930
Now you could have extruded out, but I find that doing it with a solidified just makes it that much

18
00:01:24,930 --> 00:01:25,260
better.

19
00:01:25,350 --> 00:01:30,720
So now if I click on even thickness, always be aware I was trying to turn this on because it basically

20
00:01:30,720 --> 00:01:33,570
means that I'll be even going all the way around here.

21
00:01:33,930 --> 00:01:38,550
Now let's stop and you'll see that you can't really actually do anything with this mesh.

22
00:01:38,580 --> 00:01:40,620
And the reason is we have to actually apply.

23
00:01:40,620 --> 00:01:47,100
This should just make sure if you press one, that you're actually happy with the thickness of this

24
00:01:47,100 --> 00:01:48,060
actual arch.

25
00:01:48,060 --> 00:01:52,690
I might want a little bit tired, just a little bit thicker, something like that.

26
00:01:52,690 --> 00:01:54,450
I think that looks really rather nice.

27
00:01:54,720 --> 00:01:55,110
All right.

28
00:01:55,120 --> 00:02:00,960
So to apply this again, can you click this down arrow all press control a and then we'll just apply

29
00:02:00,960 --> 00:02:06,990
that next one I want to do is want to think about before we do anything, bringing in some seams just

30
00:02:06,990 --> 00:02:10,510
to make sure it's going to make it easy for us when we actually split this up.

31
00:02:10,640 --> 00:02:15,840
So what we'll do is we'll come over to like I'm going to come round to the back of shifting plate from

32
00:02:15,840 --> 00:02:17,150
the grab all these edges here.

33
00:02:17,370 --> 00:02:20,160
I'm going to write plate come down Monkseaton.

34
00:02:20,580 --> 00:02:22,230
Right now we need to split these up.

35
00:02:22,230 --> 00:02:24,030
So I'm going to know he's going to come to face select.

36
00:02:25,110 --> 00:02:30,360
And what they need to do is now to split these up, as I need to think how big each one of these blocks

37
00:02:30,360 --> 00:02:30,970
is going to be.

38
00:02:31,170 --> 00:02:37,200
So one considers I'm going to grab these two at the bottom and then I'm going to miss one.

39
00:02:37,440 --> 00:02:39,870
And then I'm going to grab to miss one.

40
00:02:40,020 --> 00:02:43,290
Grab to miss one, grab two.

41
00:02:43,440 --> 00:02:45,780
And that should leave me then two at the top.

42
00:02:46,050 --> 00:02:47,880
And then I want to just follow it back round.

43
00:02:47,880 --> 00:02:54,120
So grab on to someone like so and then I should end up exactly the same as what I did this side.

44
00:02:54,660 --> 00:02:59,340
Now you can split this person, the people, but there is another way as well.

45
00:02:59,490 --> 00:03:01,070
What you need to press is the WidePoint.

46
00:03:01,350 --> 00:03:05,280
So press Y and then press G, and that will give you free movement.

47
00:03:05,280 --> 00:03:09,180
And you can see that you've actually split them all when to split them up with the WIBLE.

48
00:03:09,180 --> 00:03:13,260
And I always press the G just to make sure they split and then I move them round with the mouse and

49
00:03:13,260 --> 00:03:14,460
then just click right.

50
00:03:14,460 --> 00:03:16,680
Click on the mouse just to drop them back in place.

51
00:03:16,680 --> 00:03:19,940
And now and now they're all ready to go next.

52
00:03:19,950 --> 00:03:24,660
Now we need to bring these in a little just so we can put some faces on the inside of each of these.

53
00:03:24,660 --> 00:03:29,600
Because if I bring this out, you can see, for instance, that they've got gaps in each one of these.

54
00:03:29,600 --> 00:03:30,880
So let's do that now.

55
00:03:31,050 --> 00:03:34,900
Now, to put this back, let's just press control Z and now we're going to do is grab everything.

56
00:03:34,920 --> 00:03:40,830
So I'm going to press A I'm going to come up to my little interlocking links here on individual origins.

57
00:03:41,010 --> 00:03:47,350
And now when I press the Essbaum to scale, you will see that each of these individual one scales independently

58
00:03:47,490 --> 00:03:47,970
of a press.

59
00:03:47,980 --> 00:03:50,200
S bring them in and there you go.

60
00:03:50,670 --> 00:03:52,570
Now you can see exactly what you do.

61
00:03:52,890 --> 00:03:56,340
So the next thing I want to do is I need to put faces on each of these.

62
00:03:56,490 --> 00:04:02,400
So long today is going to come up to eight states, mesh come down to where it says clean up, go across.

63
00:04:02,400 --> 00:04:04,410
And we've got one that says fill holes.

64
00:04:04,530 --> 00:04:06,000
So let's fill all those holes in.

65
00:04:06,120 --> 00:04:07,780
And that's a really quick way of doing that.

66
00:04:08,310 --> 00:04:12,060
Now, there are two faces of the bomb that we really don't need, which is this one and this one.

67
00:04:12,280 --> 00:04:13,750
Let's lead bases.

68
00:04:13,770 --> 00:04:17,340
And now I want to actually make a seam on each of these faces.

69
00:04:17,430 --> 00:04:19,470
So, again, this is a little bit tedious.

70
00:04:19,620 --> 00:04:24,030
Belongingness do is I'm going to just come in and grab all of these faces.

71
00:04:25,130 --> 00:04:32,000
On this side, first, just so I can then go back up the opposite way to make sure I've actually got

72
00:04:32,000 --> 00:04:32,390
them all.

73
00:04:32,610 --> 00:04:33,690
So let's keep going.

74
00:04:34,850 --> 00:04:38,230
All the way down to the bottom and now let's come the other way.

75
00:04:39,530 --> 00:04:44,720
And we need some of these systems, obviously, because if not, we will have infinite loops again.

76
00:04:46,030 --> 00:04:50,920
And we're doing it before we bevell them or anything like that, because it does make it a ton easier

77
00:04:51,580 --> 00:04:55,480
if you think of in advance where your teams are going to go.

78
00:04:57,350 --> 00:05:03,440
So there we go now to Mark seems in face like you can't press right, Plake there will be no option

79
00:05:03,440 --> 00:05:06,220
that for Mark seems so what you need to do is press control.

80
00:05:06,590 --> 00:05:09,880
And then you'll see Maxime's is here and there we go.

81
00:05:10,280 --> 00:05:10,700
All right.

82
00:05:10,710 --> 00:05:15,700
So now I want to do is first of all, I want to come in with schlepp because if I leave this on face,

83
00:05:15,710 --> 00:05:22,030
like and I try and grab one of these, so I press out, you'll see that I will leave these two behind.

84
00:05:22,160 --> 00:05:23,390
So I don't want to do that.

85
00:05:23,390 --> 00:05:28,940
So I want to do is I want to come in to actually grab this top one, press one, and then I'm going

86
00:05:28,940 --> 00:05:34,410
to press the ESSBAUM just to bring this one out on its own, a little bit like so just to give it some

87
00:05:34,410 --> 00:05:39,260
variance and a kind of keystone in the top middle of our actual door.

88
00:05:39,740 --> 00:05:45,590
Now I want to do is I want to bring these close to each other, but I might as well bring my material

89
00:05:45,590 --> 00:05:46,130
in first.

90
00:05:46,310 --> 00:05:48,500
So I'm going to do is I'm going to unwrap these.

91
00:05:48,620 --> 00:05:54,740
So I went to press a come over to you, the editing press the button, that is do me straight to where

92
00:05:54,740 --> 00:05:57,890
you need to be, press you on top.

93
00:05:58,310 --> 00:05:59,000
And there we go.

94
00:05:59,000 --> 00:06:01,330
We can see all of our blogs up.

95
00:06:01,370 --> 00:06:02,920
And now let's bring home and say, really?

96
00:06:03,200 --> 00:06:05,000
So we'll go over to Qadim.

97
00:06:05,750 --> 00:06:09,350
We'll come over to our materials panel, which is this one here.

98
00:06:09,470 --> 00:06:17,480
Press the button new and we'll put this Rock and Mosse like.

99
00:06:17,480 --> 00:06:22,550
So I want to press dot on the number pad just to zoom out a little bit and then I'm going to zoom out

100
00:06:22,550 --> 00:06:24,960
and I should have my principles here again.

101
00:06:25,340 --> 00:06:31,550
Now let's do what we did before and bring in our rock'em also control shift and say, fine, we Iraq

102
00:06:31,550 --> 00:06:32,150
and Mosul.

103
00:06:32,150 --> 00:06:35,780
So it shall be on the texture's and here we always are, rock.

104
00:06:36,260 --> 00:06:42,380
And then again, grab the top one shifts like the ball one click on the principal texture and there

105
00:06:42,380 --> 00:06:43,510
we go there all Brotton.

106
00:06:43,820 --> 00:06:48,380
Now you can see that we've got a lot of groups down here and the Stones are looking very, very sharp

107
00:06:48,380 --> 00:06:48,890
at the moment.

108
00:06:49,160 --> 00:06:51,320
Now let's say work on one thing at a time.

109
00:06:51,590 --> 00:06:54,950
So what we first of all, going to do is we're going to level these up.

110
00:06:55,220 --> 00:06:58,640
So I'm going to press control, like all transforms, right?

111
00:06:58,700 --> 00:07:00,230
Like the origins geometry.

112
00:07:00,380 --> 00:07:02,690
Come over to my little Sponer on the right hand side.

113
00:07:02,900 --> 00:07:03,920
I'd modify it.

114
00:07:04,010 --> 00:07:06,350
And this time we're going to come down to where it says Bevell.

115
00:07:06,470 --> 00:07:12,320
And you'll see now that go something like this, which is quite nice, the kind of a little bit beveled

116
00:07:12,320 --> 00:07:13,070
off too much.

117
00:07:13,070 --> 00:07:18,290
And I don't really want that, first of all, to tell my segments to to to make them nice and round

118
00:07:18,290 --> 00:07:18,710
for me.

119
00:07:18,830 --> 00:07:25,370
And then I'm going to turn this down and you'll see as I bring this down with, again, more or less

120
00:07:25,370 --> 00:07:27,400
rounded, depending on where this amount is.

121
00:07:27,740 --> 00:07:31,130
So what I need to do, though, is, first of all, I need to bring them closer together.

122
00:07:31,220 --> 00:07:34,280
So I've got a good idea of how round it off I need them.

123
00:07:34,520 --> 00:07:38,290
So let's press top let's press eight just to make sure you've grabbed everything.

124
00:07:38,420 --> 00:07:40,970
Make sure your interlocking links are on individual origins.

125
00:07:41,150 --> 00:07:46,100
Press one on the normal path so you can see where the gaps are and then press s and pull it out and

126
00:07:46,100 --> 00:07:48,560
you can use the born again to pull it out.

127
00:07:48,570 --> 00:07:52,490
Not so much or more, just slows it down a little bit, making it more refined.

128
00:07:52,670 --> 00:07:53,890
So I'm going to pull it out there.

129
00:07:54,020 --> 00:07:57,980
I'm going to press the top on, I'm going to double top the eight so I can see while I'm actually looking

130
00:07:57,980 --> 00:08:02,360
at and I can see that I've probably got still again, too much got down here.

131
00:08:02,450 --> 00:08:04,910
So again, I'm going to press the top there.

132
00:08:04,940 --> 00:08:06,260
I should already be selected.

133
00:08:06,260 --> 00:08:10,190
I'm going to press S and pull them out just a little bit more top again.

134
00:08:10,190 --> 00:08:10,940
And there you go.

135
00:08:10,940 --> 00:08:15,010
Now, the really, really nice and they look like me really, really well together.

136
00:08:15,320 --> 00:08:20,480
Now, the other thing we can do is we can actually just add something into this note set.

137
00:08:20,480 --> 00:08:26,840
So just to make it a little bit easier to really make this darker or lighter, depending on what we

138
00:08:26,840 --> 00:08:27,710
want from our scene.

139
00:08:27,890 --> 00:08:33,640
So let's come in, grab the material output shift, select the principal, pull them over to the right

140
00:08:33,650 --> 00:08:35,490
hand side and then hover over it.

141
00:08:35,510 --> 00:08:36,680
And what you going to press this shift?

142
00:08:36,680 --> 00:08:43,640
A search is going to become so GM and that then is going to enable you to bring in a gamma so slightly

143
00:08:43,640 --> 00:08:46,220
gamma and drop it now nothing will happen.

144
00:08:46,220 --> 00:08:52,160
But if you zoom in and turn this gamma up, you'll see now it can make it darker or lighter.

145
00:08:52,190 --> 00:08:58,130
And it's just a really easy way just to make it a little bit darker for what we need it when we actually

146
00:08:58,130 --> 00:08:58,970
do the render.

147
00:08:59,150 --> 00:09:03,950
This is a really easy way so it can mess around with this very easily and get the look that we're actually

148
00:09:03,950 --> 00:09:04,520
looking for.

149
00:09:05,240 --> 00:09:06,020
OK, everyone.

150
00:09:06,020 --> 00:09:11,330
So what we'll do now is on the next lesson will actually make a start on a wooden doll.

151
00:09:11,450 --> 00:09:14,930
And then finally we'll get on with the steps and then we'll do the hinges.

152
00:09:15,020 --> 00:09:17,700
So I hope you enjoyed the calls and I'll stay on the next one.

153
00:09:17,810 --> 00:09:18,610
Thanks a lot, everyone.

154
00:09:18,650 --> 00:09:19,100
Bye bye.
