1
00:00:09,800 --> 00:00:15,340
Welcome back, everyone, to 3D modeling, The Hobbit dosing with Blend two point nine and Adobe Photoshop,

2
00:00:15,350 --> 00:00:16,670
and this is where we left off.

3
00:00:16,880 --> 00:00:20,050
Now let's go straight into all mullein top appear.

4
00:00:20,120 --> 00:00:23,470
Let's press top and now let's work on our wood.

5
00:00:23,690 --> 00:00:29,450
So what we need to do is if I press top, you'll see that we've actually got all of these actual lines

6
00:00:29,450 --> 00:00:32,050
going down and we can use these to create our wood.

7
00:00:32,150 --> 00:00:37,910
So I'm going to press top I'm just going to hide this all the way just so I've a little bit more visual

8
00:00:37,910 --> 00:00:38,780
to play around with.

9
00:00:38,790 --> 00:00:41,610
So I'm going to press click on here press tab again.

10
00:00:41,780 --> 00:00:44,280
And now let's mop some seams out straight away.

11
00:00:44,330 --> 00:00:47,080
Again, I'm thinking of how to melt the seams out.

12
00:00:47,780 --> 00:00:49,970
So it's going to save me a lot of work in the future.

13
00:00:50,120 --> 00:00:53,870
So I'm going to come round all the outside of here, including these.

14
00:00:55,340 --> 00:00:57,560
I'm going to grab it all the way up to here with control.

15
00:00:57,560 --> 00:01:00,440
Click on the right click then on Monkseaton.

16
00:01:00,860 --> 00:01:03,410
Now I need to think where the actual panels are going to be for this.

17
00:01:03,530 --> 00:01:08,300
So I think I'm going to have one here and then it's just going to be every one going across.

18
00:01:09,080 --> 00:01:13,580
And then one line to do is use these two here just as one piece of wood.

19
00:01:13,670 --> 00:01:15,410
I'm going to right click Monkseaton.

20
00:01:16,600 --> 00:01:20,590
Now, you should end up with something like this or we need to do now, it split these pieces of wood

21
00:01:20,610 --> 00:01:22,020
or someone to come to this side.

22
00:01:22,210 --> 00:01:28,480
I'm going to press Al to grab this island and I want to go to each one grubin, the island like, so

23
00:01:29,200 --> 00:01:29,660
why?

24
00:01:29,860 --> 00:01:32,340
Gee, again, just to make sure that they're all split up.

25
00:01:32,470 --> 00:01:32,860
Right.

26
00:01:32,880 --> 00:01:34,680
Click and drop it back in place.

27
00:01:35,140 --> 00:01:39,020
Now, we need to do is we need to make some edge loops going across the.

28
00:01:39,040 --> 00:01:46,150
And the reason for that is because I want to have a little bit more control of how kind of broken these

29
00:01:46,150 --> 00:01:49,190
panels are going to look or how much movement is them.

30
00:01:49,210 --> 00:01:54,070
In other words, I don't want them perfectly straight, like it's a new build kind of house or something

31
00:01:54,070 --> 00:01:54,480
like that.

32
00:01:54,610 --> 00:01:55,370
So I'm going to do that.

33
00:01:55,410 --> 00:02:01,330
I'm going to press a wand and then welcome again to our friend the basic tools that scrub the Bicego

34
00:02:01,420 --> 00:02:04,000
among many areas I'm going to cut across like.

35
00:02:04,000 --> 00:02:10,690
So I'm going to take off Arena and I'm going to start again, this one here to zero to make the line

36
00:02:10,690 --> 00:02:11,560
perfectly straight.

37
00:02:11,770 --> 00:02:15,910
Now, the one thing you need to be aware of when you do this is just make sure that you're not in on

38
00:02:15,910 --> 00:02:19,940
the corner and see it so you can see a kind of halfway in this panel here.

39
00:02:20,500 --> 00:02:20,910
All right.

40
00:02:20,920 --> 00:02:24,240
So I want to know the forecourts down here to give me more movement.

41
00:02:24,250 --> 00:02:26,950
So welcome to Michigan Bisect.

42
00:02:26,950 --> 00:02:29,520
And let's call this one somewhere around here.

43
00:02:29,980 --> 00:02:36,550
Again, same procedure playing normal, put on zero and then let's move to the next one.

44
00:02:36,560 --> 00:02:43,960
So a mesh bisect and let's call this one something round here like so.

45
00:02:45,620 --> 00:02:46,170
Zero.

46
00:02:46,640 --> 00:02:54,840
And then again, a mash by sect and one I think I want, maybe I could get away one.

47
00:02:54,840 --> 00:02:56,920
I think I'll put two, actually, so I'll put one here.

48
00:02:59,730 --> 00:03:07,380
And then come back, so a match by six on the last one, I think we'll go here like so.

49
00:03:09,060 --> 00:03:09,630
Like so.

50
00:03:10,050 --> 00:03:10,470
All right.

51
00:03:10,470 --> 00:03:11,810
So now we've got those in.

52
00:03:11,850 --> 00:03:14,460
We don't need democracy down there, of course.

53
00:03:14,550 --> 00:03:15,950
And they're still split up.

54
00:03:16,050 --> 00:03:18,210
So now we need to do is we need to grab them all.

55
00:03:18,210 --> 00:03:18,960
So, eh.

56
00:03:19,080 --> 00:03:20,660
And then I want to pull them back.

57
00:03:20,760 --> 00:03:24,280
So I'm going to press E and you'll notice that because they're all split over.

58
00:03:24,300 --> 00:03:28,680
You got all these lines, which is showing you that they're all being shown to back in the same direction.

59
00:03:29,250 --> 00:03:29,680
All right.

60
00:03:29,690 --> 00:03:31,410
So why did we do all that work?

61
00:03:31,620 --> 00:03:35,250
Well, now you'll see that what we can do is we can actually bring these in now.

62
00:03:35,250 --> 00:03:39,390
So to come again to our face like Al on each one of these now.

63
00:03:40,290 --> 00:03:43,080
And you'll notice that we're just grabbing just the from.

64
00:03:44,430 --> 00:03:47,130
So it shouldn't grab any of the tops or bombs.

65
00:03:47,130 --> 00:03:53,340
All the box press one, come up to your interlocking links, make sure you're on individual origins,

66
00:03:53,340 --> 00:03:59,090
press Senex and now you can bring them in and you can start to see them looking like wooden panels.

67
00:03:59,430 --> 00:04:02,290
Now, as I said, we don't want them all to be straight down.

68
00:04:02,460 --> 00:04:08,550
So what you can do now is you can come up to your proportional editing point, which is this bone here.

69
00:04:08,910 --> 00:04:13,530
Click on and then you notice you click the Downa, you've got smooth and you've got all these options.

70
00:04:13,690 --> 00:04:14,960
Let's put it on random.

71
00:04:15,150 --> 00:04:16,530
In fact, I'll show you what's moved us.

72
00:04:16,730 --> 00:04:19,110
So we'll come to smooth will press top.

73
00:04:19,110 --> 00:04:20,940
And what we'll do is we'll come in now.

74
00:04:20,940 --> 00:04:23,240
Let's click it on and then come over.

75
00:04:23,250 --> 00:04:25,740
And if you move it with this arrow, all press the bone.

76
00:04:25,750 --> 00:04:31,080
You'll see that you guys circle around and actually everything is affected within this circle.

77
00:04:31,180 --> 00:04:33,000
You can also make the circle smaller.

78
00:04:33,240 --> 00:04:35,620
So like so or you can make it larger.

79
00:04:35,880 --> 00:04:42,090
Now we'll show you how we can actually make these dolls look really good with very little effort.

80
00:04:42,330 --> 00:04:44,540
So let's go to editing.

81
00:04:44,550 --> 00:04:45,210
Click this down.

82
00:04:45,210 --> 00:04:48,000
Now, what we're going to do is we're going to put this on random.

83
00:04:48,330 --> 00:04:51,870
Then we're going to do is going to come in with a red arrow and say, I'm just going to move this slightly

84
00:04:51,870 --> 00:04:55,050
over, bring in my circle like so.

85
00:04:55,350 --> 00:04:57,090
And then I'm just going to go to the next one.

86
00:04:57,900 --> 00:04:58,800
To the next one.

87
00:04:59,790 --> 00:05:01,890
To the next one and then we're going to do it.

88
00:05:01,920 --> 00:05:06,050
I'm also going to move these out, so I'm going to come to this one, move it out.

89
00:05:07,670 --> 00:05:08,390
Like so.

90
00:05:09,410 --> 00:05:13,400
And what it's doing is it's randomising, which way they're all moving.

91
00:05:13,580 --> 00:05:19,040
The other thing is, well, I want to move these up so remote like so bring that in a little bit.

92
00:05:19,400 --> 00:05:20,150
Not too much.

93
00:05:20,150 --> 00:05:21,680
We don't want those too much.

94
00:05:22,040 --> 00:05:27,050
We're going to come to this one now, bring it out a little bit and you'll see now we've got a lot of

95
00:05:27,050 --> 00:05:27,910
Aryan's down here.

96
00:05:27,910 --> 00:05:30,380
And let's do the same on here, likesome.

97
00:05:30,620 --> 00:05:31,420
And there we go.

98
00:05:31,550 --> 00:05:37,000
You can see very little weg how we've actually made this doll look pretty old and weathered.

99
00:05:37,430 --> 00:05:43,010
Now, the next thing is what you need to do is you need to press one and just have a look where if you

100
00:05:43,010 --> 00:05:48,620
can see through the actual door, sometimes what it does is because it's proportional and it's in a

101
00:05:48,620 --> 00:05:49,790
will affect the back of it.

102
00:05:49,940 --> 00:05:58,910
So why tend to do now is I'll go to the back Colt's space, like grab each of these islands like so

103
00:05:58,910 --> 00:06:02,570
with the elbow and make sure proportionally that's in all press control.

104
00:06:02,570 --> 00:06:04,790
One of the parts you can go to the reverse.

105
00:06:05,090 --> 00:06:10,610
And then what you're going to do is you're going to make sure again that on individual origins as an

106
00:06:10,610 --> 00:06:14,330
axe and just bring them together and it doesn't even matter.

107
00:06:14,360 --> 00:06:15,410
Overlapping a little bit.

108
00:06:15,410 --> 00:06:17,240
So estimates bring them together.

109
00:06:18,890 --> 00:06:23,390
Just so they actually all touch him and now what you'll find is that you shouldn't be able to see through

110
00:06:23,390 --> 00:06:26,210
the backs of them because we've actually brought those together.

111
00:06:26,330 --> 00:06:30,980
If you can still see daylight, which might happen on the render, we'll just bring them closer together

112
00:06:30,980 --> 00:06:31,280
again.

113
00:06:31,640 --> 00:06:32,080
All right.

114
00:06:32,090 --> 00:06:34,000
So now we need to bring in actual wood.

115
00:06:34,190 --> 00:06:38,260
So let's come over to our materials panel, which is this bone here.

116
00:06:38,840 --> 00:06:42,320
And what we're going to do is going to click the plus one because we don't need a new material, because

117
00:06:42,320 --> 00:06:47,030
we're going to use the same word as what we've used for all stained glass window.

118
00:06:47,330 --> 00:06:48,500
Let's click the down arrow.

119
00:06:48,800 --> 00:06:49,310
Come down.

120
00:06:49,310 --> 00:06:52,460
You'll see the one we named would click on.

121
00:06:52,460 --> 00:06:53,840
You'll end up with something like this.

122
00:06:54,020 --> 00:06:59,750
Now, before we wrap this again, we need to reset the transformation so controlling all transforms

123
00:06:59,870 --> 00:07:06,030
right place of origin to geometry, press the top and grab everything we may and not press you on.

124
00:07:06,040 --> 00:07:06,240
Right.

125
00:07:06,440 --> 00:07:07,910
And you should end up with something like this.

126
00:07:08,150 --> 00:07:10,920
Of course, that would be all going the wrong way.

127
00:07:11,210 --> 00:07:11,680
All right.

128
00:07:11,690 --> 00:07:14,630
So let's go to the it's press the top one.

129
00:07:15,050 --> 00:07:18,070
And now you can see which ones are not right.

130
00:07:18,110 --> 00:07:20,280
And you can see here that some of these aren't right.

131
00:07:20,300 --> 00:07:24,810
So these ones here, the basically infinite loops, and that's not what we want.

132
00:07:24,860 --> 00:07:30,620
So what we need to do to find out why they are and the reason is because we haven't actually put any

133
00:07:30,950 --> 00:07:34,340
edges going down here with Almog seems.

134
00:07:34,460 --> 00:07:39,100
So I'm going to go quickly into modeling and that's something I should have thought about.

135
00:07:39,510 --> 00:07:42,980
I'm going to do now is I'm going to mock seams on each one of these.

136
00:07:43,010 --> 00:07:47,150
So when you come in and select and let's grab each one of these.

137
00:07:48,490 --> 00:07:56,020
And Martha seems like so, and then there won't be infinite loops now because the doll is coming to

138
00:07:56,020 --> 00:08:00,750
the stone arch, it doesn't matter too much that there is a seam here.

139
00:08:00,880 --> 00:08:06,610
And also you'll find that when you actually marking seams on wood, the edges of the wood doesn't really

140
00:08:06,610 --> 00:08:09,950
matter if it's actually got seam on them because it's obviously a corner.

141
00:08:10,180 --> 00:08:13,360
Now, if you didn't bricks or something like that, this will really.

142
00:08:14,230 --> 00:08:19,840
On something like what is a said, it's not a problem at all because most of the time the wool grain

143
00:08:19,840 --> 00:08:25,180
on the the edge going down the inside here is different from the one going this way.

144
00:08:25,660 --> 00:08:27,490
And that's why it doesn't matter so much.

145
00:08:27,820 --> 00:08:28,240
All right.

146
00:08:28,240 --> 00:08:35,500
So let's just grab all of these right seams, grab everything back into uveitis and pressure you from

147
00:08:35,500 --> 00:08:35,920
the wrap.

148
00:08:36,100 --> 00:08:42,650
And then we go, you can see now looking much, much nicer and they're all going the wrong way still.

149
00:08:42,670 --> 00:08:43,630
So let's spin them round.

150
00:08:43,640 --> 00:08:48,610
So all 90, let's spin around and evaluate what that looks like.

151
00:08:48,610 --> 00:08:51,280
And you can see now that it's looking really nice.

152
00:08:51,280 --> 00:08:58,010
And I think that the actual wool grain on here is actually how I want it.

153
00:08:58,030 --> 00:09:01,510
In other words, it's about the right size for the actual size of wood.

154
00:09:01,930 --> 00:09:08,970
Now, if I come back now to Modlin and I press, I'll take just to bring back our arch double top there.

155
00:09:08,980 --> 00:09:14,800
And you can say it's really starting to come together now, albeit we've got something a problem here

156
00:09:14,920 --> 00:09:23,140
in this glass stained glass window isn't set correctly because we can't see any light coming through

157
00:09:23,140 --> 00:09:23,470
that.

158
00:09:23,480 --> 00:09:26,140
So let's grab it and let's just set it up where it's going to go.

159
00:09:26,140 --> 00:09:31,810
And you can see that's the motion that it's no, let's turn it off and let's bring this and just sit

160
00:09:31,930 --> 00:09:33,520
on that now.

161
00:09:33,520 --> 00:09:34,670
Let's make a hole in the door.

162
00:09:34,930 --> 00:09:40,840
So while I've got this here, I'm going to shift s because it's a selected shift A I'm going to bring

163
00:09:40,840 --> 00:09:43,150
in a cylinder.

164
00:09:43,420 --> 00:09:45,700
I'm going to come down, I'm going to put this on 20.

165
00:09:45,700 --> 00:09:46,800
I don't need this on there.

166
00:09:46,810 --> 00:09:50,020
32, because I'm just basically in a hole in the door.

167
00:09:50,140 --> 00:09:53,170
So let's put this on twenty and then spin it round.

168
00:09:53,320 --> 00:10:00,010
So all X ninety one the number pad, let's make it smaller like so.

169
00:10:00,250 --> 00:10:06,340
And now we're just going to zoom in and I'm just going to make it so that the hole starts round about

170
00:10:06,340 --> 00:10:06,650
here.

171
00:10:06,970 --> 00:10:09,670
So how many do that then is going to click on mudhole.

172
00:10:10,180 --> 00:10:12,190
I'm going to come over to my modifiers.

173
00:10:12,310 --> 00:10:16,700
I modify it and this time we're going to pick a boolean.

174
00:10:17,200 --> 00:10:19,150
Now you'll notice that you've got three options.

175
00:10:19,280 --> 00:10:25,300
Just make sure it's on difference, like the pipette Komova over and click on your cylinder and you

176
00:10:25,300 --> 00:10:27,160
should be able to see something happen in there.

177
00:10:27,400 --> 00:10:32,460
Now, if you move this cylinder now, you will be able to change where about this whereabouts.

178
00:10:32,470 --> 00:10:35,210
This hole is actually cool, but we obviously don't want to do that.

179
00:10:35,230 --> 00:10:39,100
So what we can do is simply come over to our modify and apply it with control.

180
00:10:39,430 --> 00:10:41,650
And now I can delete this cylinder all the way.

181
00:10:41,650 --> 00:10:43,690
So delete cylinder and there we go.

182
00:10:43,930 --> 00:10:48,460
There is a hole already done and even the wood is looking like it's going the right way.

183
00:10:48,850 --> 00:10:51,640
Next thing you want to do now is a need to shade this door.

184
00:10:51,640 --> 00:10:52,810
So I'm going to grab the door again.

185
00:10:53,050 --> 00:10:53,410
Right.

186
00:10:53,410 --> 00:10:54,670
Click shapes move.

187
00:10:54,940 --> 00:10:55,290
Come over.

188
00:10:55,300 --> 00:10:56,320
It's a little triangle.

189
00:10:56,740 --> 00:10:57,790
Althouse, move on.

190
00:10:58,120 --> 00:10:58,870
I'm Leslie.

191
00:10:58,870 --> 00:11:03,150
Now we can see that these are very, very sharp edges and we don't particularly want neither.

192
00:11:03,250 --> 00:11:08,740
So what are we going to do is we're actually going to Beverley's now because we've got triangles in

193
00:11:08,740 --> 00:11:09,070
here.

194
00:11:09,850 --> 00:11:12,220
We can't actually use all Bevell modify it.

195
00:11:12,370 --> 00:11:18,610
Well, we could use it, but it's just actually easier to come in with each leg and just grab each of

196
00:11:18,640 --> 00:11:23,950
these edges on the front like so so I'm just going to come in grubin, each one of these.

197
00:11:24,400 --> 00:11:29,410
And if you can't grab them along here, all you need to do is just come in, grab the door, press the

198
00:11:29,410 --> 00:11:33,550
questionmark, and that's going to isolate two out and then just do it the old fashioned way.

199
00:11:33,550 --> 00:11:36,310
So you're going to grab one wave shift click like.

200
00:11:36,310 --> 00:11:40,840
So I want to just want to make sure that I'm just not going around the back of it or anything like that.

201
00:11:40,840 --> 00:11:43,750
So I do just literally one Josia from.

202
00:11:45,750 --> 00:11:51,590
Of these actual piece of wood grubin, so I want to shift and click and just save and grab the rest

203
00:11:51,590 --> 00:11:53,180
of these like so.

204
00:11:54,600 --> 00:12:00,430
Like, so now let's do this one, so zoom out, make sure we've got them all on.

205
00:12:00,540 --> 00:12:00,930
There we go.

206
00:12:00,940 --> 00:12:01,690
Think of Gromo.

207
00:12:01,770 --> 00:12:05,190
I'm not going to worry about these ones ever in the actual arch anyway.

208
00:12:05,280 --> 00:12:06,880
And then I'm going to zoom in a little bit.

209
00:12:06,960 --> 00:12:07,920
I want to press control.

210
00:12:07,920 --> 00:12:09,440
B, I'm going to pull them out.

211
00:12:10,780 --> 00:12:16,780
Very slightly presentable, and you'll see now that Romney's really, really makes a difference in how

212
00:12:16,780 --> 00:12:21,120
this door actually looks, really adds and sells more real estate.

213
00:12:21,340 --> 00:12:26,190
Now, you can see over here that these pieces of what he probably touching a little bit too much.

214
00:12:26,200 --> 00:12:30,860
So I'm actually going to go in, grab two of these and just pull them back just a little bit.

215
00:12:30,880 --> 00:12:31,570
Let's have a look.

216
00:12:31,630 --> 00:12:33,200
I think they're actually going the wrong way.

217
00:12:34,000 --> 00:12:38,380
We do seem to have a problem there, and it's because I have got the right one.

218
00:12:38,390 --> 00:12:39,400
So it's this one here.

219
00:12:39,700 --> 00:12:44,870
Let's grab this one and this one on the inside.

220
00:12:44,890 --> 00:12:49,150
Let's pull them back a little bit, pull it out, get a little bit better.

221
00:12:49,160 --> 00:12:50,470
Scrub this one as well.

222
00:12:51,190 --> 00:12:56,420
And you can see the problem I'm having is I need to grab both of these.

223
00:12:56,440 --> 00:13:03,400
So if I come in, grab the two on the inside, on the outside now, I should be able to sort of pull

224
00:13:03,400 --> 00:13:05,950
it over, still having some problems with it.

225
00:13:06,850 --> 00:13:10,750
And what I've done is I've grabbed the other side now, so I'm just going to press control that and

226
00:13:10,750 --> 00:13:13,120
just move it back in fully like.

227
00:13:13,130 --> 00:13:19,480
So now I'm going to grab this one and this one and just basically restart it, just making sure I've

228
00:13:19,480 --> 00:13:20,420
got the right ones.

229
00:13:20,440 --> 00:13:22,030
Pull it now and again.

230
00:13:22,030 --> 00:13:25,750
You can say, got a little, but I'm going to grab it with Bassler.

231
00:13:25,780 --> 00:13:30,280
That's going to be easier and grab just the inside that and now can say, there we go.

232
00:13:30,280 --> 00:13:31,810
That's so much easier to do it that way.

233
00:13:31,810 --> 00:13:33,010
So we'll do it that way instead.

234
00:13:33,040 --> 00:13:38,530
So grab it, pull it just a little bit, press the tailbone, let's grab a little bit more.

235
00:13:38,590 --> 00:13:41,620
And I can also think if I just grab this pole here.

236
00:13:42,620 --> 00:13:44,000
With I select.

237
00:13:44,980 --> 00:13:46,630
Like, so just pull it across.

238
00:13:47,110 --> 00:13:47,650
There we go.

239
00:13:47,920 --> 00:13:49,150
All right, so there we go.

240
00:13:49,180 --> 00:13:50,140
Finally, we got that.

241
00:13:50,500 --> 00:13:53,460
OK, so let's press the question mark and bring them back.

242
00:13:53,500 --> 00:13:55,510
Double tap the I and there we go.

243
00:13:55,630 --> 00:13:55,920
All right.

244
00:13:55,930 --> 00:13:57,170
That's looking really, really nice.

245
00:13:57,280 --> 00:14:02,140
So on the next one, what we need to do is we need to actually work on steps going down.

246
00:14:02,320 --> 00:14:05,960
And then finally, what we'll do is we'll work on our actual hinges.

247
00:14:06,100 --> 00:14:07,900
OK, once I hope you enjoyed that.

248
00:14:07,900 --> 00:14:09,160
And I'll see you on the next one.

249
00:14:09,190 --> 00:14:09,800
Thanks a lot.

250
00:14:09,820 --> 00:14:10,240
Bye bye.
