1
00:00:10,260 --> 00:00:15,390
Welcome back, everyone, to 3D modeling The Hobbit doll scene with Blender two point nine and Adobe

2
00:00:15,390 --> 00:00:16,080
Photoshop.

3
00:00:16,350 --> 00:00:16,800
All right.

4
00:00:16,800 --> 00:00:21,900
So one thing I'm noticing is I'm just looking at this and I'm just going to say if I bring it out a

5
00:00:21,900 --> 00:00:26,180
little bit and I think actually it's going to look back a little bit bigger.

6
00:00:26,370 --> 00:00:30,230
And it also means that you can see that this in the inside of here.

7
00:00:30,600 --> 00:00:34,460
Well, we could get away with it or we could make a little bit bigger thing.

8
00:00:34,470 --> 00:00:36,000
I'm just going to make it a little bit bigger.

9
00:00:36,150 --> 00:00:36,900
So I'll do it.

10
00:00:36,930 --> 00:00:42,530
I'll press shift as it's selected, shift A and we'll just bring in another cylinder.

11
00:00:42,960 --> 00:00:47,910
Sergeant 20 because of not reload the machine or anything like that or spin it round.

12
00:00:48,160 --> 00:00:53,910
That's make it smaller just so it comes to the outside of here.

13
00:00:53,920 --> 00:00:55,110
So I need to make it bigger.

14
00:00:56,210 --> 00:00:58,690
Something like that, I think, absolutely fine.

15
00:00:58,730 --> 00:01:06,140
And then again, when I click on a wood and modifier, I might add in another boolean, everything's

16
00:01:06,140 --> 00:01:13,580
the same, click on it, hover over it, control leg, and then let's click on some undelete to anything

17
00:01:13,580 --> 00:01:18,890
I looks so much by Releford said that it was a little bit too small and looks a little bit too dinky.

18
00:01:19,130 --> 00:01:19,610
All right.

19
00:01:19,610 --> 00:01:21,320
So now let's work on our stone steps.

20
00:01:21,440 --> 00:01:23,060
So first of all, let's bring one in.

21
00:01:23,270 --> 00:01:25,400
We'll put the because it's the world origin.

22
00:01:25,550 --> 00:01:28,550
So shift s course, it's world origin shift.

23
00:01:28,750 --> 00:01:31,190
And let's bring in a simple cube.

24
00:01:32,600 --> 00:01:33,710
Let's make it smaller.

25
00:01:33,720 --> 00:01:38,990
So as I said, and then the winds pull this down to the bottom of the Dulci one, the bottom of the

26
00:01:38,990 --> 00:01:41,060
dots be a tiny, tiny little gap.

27
00:01:41,240 --> 00:01:46,040
Then we s an X and just pull it out just to the edge of here finally.

28
00:01:46,040 --> 00:01:51,100
Then I need to bevill these off and think how much of a step no want to the top.

29
00:01:51,370 --> 00:01:58,040
So Womanist is going to top they select grab this top face, pull it back a little bit and I think I'll

30
00:01:58,040 --> 00:01:58,940
bevell it off now.

31
00:01:58,940 --> 00:02:07,070
So postop to go into object mode control to reset all transforms right plake so origin to geometry and

32
00:02:07,070 --> 00:02:13,460
now olders press tab and select and we'll just grab this edge and this edge and then I'm going to press

33
00:02:13,460 --> 00:02:18,710
control be to actually Beverly all like so and I'm just looking.

34
00:02:18,740 --> 00:02:22,850
I think that it needs to be definitely pulled a little bit.

35
00:02:22,850 --> 00:02:28,250
So I'm going to grab the bottom face, pull it up a little bit and then obviously I'm going to grab

36
00:02:28,250 --> 00:02:30,740
the back and want to pull that back a little bit.

37
00:02:31,890 --> 00:02:37,960
And now I'm just making sure that it fits No one stories, I want to bring in all steps and to do that,

38
00:02:37,960 --> 00:02:44,160
I would like a clean viewport so long instead is going to press top come over to rights inside and you'll

39
00:02:44,160 --> 00:02:45,540
see it says scene collection.

40
00:02:45,660 --> 00:02:45,990
Right.

41
00:02:45,990 --> 00:02:48,400
Click on it and let's play a new collection.

42
00:02:48,660 --> 00:02:53,850
Now let's come down, click on this collection, make sure that you're in objet mode so you can see

43
00:02:53,850 --> 00:02:58,890
with an object mode over here, press shift a AM going to bring in a circle.

44
00:02:58,890 --> 00:03:03,410
Now, the circle should appear in our collection three, which means now and come over.

45
00:03:03,430 --> 00:03:06,510
We've got this little light and just hide that out the way.

46
00:03:06,660 --> 00:03:07,890
And there we go.

47
00:03:08,550 --> 00:03:11,930
Now I do have this, which is a stained glass, hummingbird's viji.

48
00:03:12,060 --> 00:03:13,110
I don't need that.

49
00:03:13,260 --> 00:03:14,840
I've already made my windows.

50
00:03:14,850 --> 00:03:15,360
I want to right.

51
00:03:15,360 --> 00:03:19,510
Click and just go down to where it says delete and now I should just have these in here.

52
00:03:19,830 --> 00:03:21,750
Now let's come to our circle.

53
00:03:21,760 --> 00:03:25,680
I want to make a little bit bigger like so I want a press tab.

54
00:03:25,980 --> 00:03:28,830
I want to grab the outside of it of the edge.

55
00:03:28,830 --> 00:03:30,300
So let's come up to each leg.

56
00:03:30,420 --> 00:03:37,440
I want to press E and S and just bring it in and while we bring it in is we're going to use one of these

57
00:03:37,440 --> 00:03:38,610
pieces is the steps.

58
00:03:38,760 --> 00:03:44,700
So if I go over the top now, wherever you want, the step to start from, that is the one you should

59
00:03:44,700 --> 00:03:45,090
use.

60
00:03:45,270 --> 00:03:52,620
So I want my step to be flat against the door here and then start coming down here like so like a spiral.

61
00:03:52,620 --> 00:03:53,850
So I want to take this step.

62
00:03:54,210 --> 00:03:59,250
And then I went to this I went to split this off from the rest of the I want to press y and then I went

63
00:03:59,250 --> 00:04:00,250
to grab the rest of these.

64
00:04:00,250 --> 00:04:05,460
So when I click on one of these press L and it feels like everyone built this one that splits, I'll

65
00:04:05,640 --> 00:04:09,570
press delete that says and you should be left with this.

66
00:04:09,750 --> 00:04:12,990
Next thing we need to do is we need to just bring this down a little bit.

67
00:04:12,990 --> 00:04:14,460
So I went to grab it.

68
00:04:14,460 --> 00:04:17,670
I'm going to press E and just make it more of a step.

69
00:04:17,790 --> 00:04:21,690
We don't need to look at how thick or anything like that we want to make at the moment.

70
00:04:21,870 --> 00:04:24,320
We just want some visual to actually work with.

71
00:04:24,690 --> 00:04:30,990
Next thing when to do when the press top, I'm going to make sure that my cursor is in the center.

72
00:04:30,990 --> 00:04:37,410
So shift as cursor to world origin, shift a and we're going to bring in an actual empty.

73
00:04:37,890 --> 00:04:43,810
So bring in a plane access empty and we're going to use this to actually create this spiral steps.

74
00:04:44,130 --> 00:04:45,960
Now let's come back to all steps.

75
00:04:46,290 --> 00:04:48,150
Control all transforms.

76
00:04:48,150 --> 00:04:48,490
Right.

77
00:04:48,580 --> 00:04:51,330
Click Origins, geometry and now come over.

78
00:04:51,330 --> 00:04:54,720
It's where the sponges on the right hand side on modifier.

79
00:04:54,810 --> 00:04:57,180
I'm going to add in an array now.

80
00:04:57,180 --> 00:05:03,150
The first thing I want to do is I want to turn off the relative offset, constant offset on object offset

81
00:05:03,150 --> 00:05:03,450
on.

82
00:05:03,570 --> 00:05:10,020
And then if now we open the object offset, you want to basically use this actual empty server, come

83
00:05:10,020 --> 00:05:13,350
down, grab my pipette, click on my empty.

84
00:05:13,800 --> 00:05:15,660
You'll notice that this happens at the moment.

85
00:05:15,750 --> 00:05:21,210
And the reason is I actually reset the orientation and I shouldn't have put it actually here.

86
00:05:21,300 --> 00:05:26,400
So I'm just going to reset the back to the center where this actual empty is so right.

87
00:05:26,400 --> 00:05:30,330
Click so origin to 3d kesa and that will happen.

88
00:05:30,330 --> 00:05:31,410
And that's exactly what.

89
00:05:31,680 --> 00:05:33,030
Now let's turn off the count.

90
00:05:33,050 --> 00:05:37,620
So we're going to send up a fair bit to start with something like nine or ten and then where are you

91
00:05:37,620 --> 00:05:41,130
going to raise you to grab your empty going to all and Z.

92
00:05:41,220 --> 00:05:46,830
And you'll notice now that you have a spiral coming out like so now this is where all steps are going

93
00:05:46,830 --> 00:05:47,430
to go down.

94
00:05:47,640 --> 00:05:53,340
And what you can do now is just pull this down and you'll see now you end up with a beautiful spiral

95
00:05:53,340 --> 00:05:54,060
staircase.

96
00:05:54,060 --> 00:05:56,460
And that's exactly what now we can see that.

97
00:05:56,910 --> 00:05:59,160
I'm not sure everyone's going out so far.

98
00:05:59,160 --> 00:06:02,280
I think I want to just come in to the halfway point.

99
00:06:02,460 --> 00:06:08,250
But what I'll do, first of all, is get in place and then I'll have a much, much better idea of where

100
00:06:08,250 --> 00:06:09,060
I actually want this.

101
00:06:09,180 --> 00:06:12,240
So let's come over to where he sees collection.

102
00:06:12,390 --> 00:06:13,620
And actually it's an eye.

103
00:06:13,800 --> 00:06:17,760
Come and bring that back in and now let's move these into place.

104
00:06:17,880 --> 00:06:21,390
Now, you can't move it by grabbing the empty all the steps you need to grab both of them.

105
00:06:21,600 --> 00:06:25,170
So we'll grab both and then we'll pull them out like so.

106
00:06:26,750 --> 00:06:31,280
The Green Arrow, and you can see the way way too small, so let's make them bigger.

107
00:06:31,280 --> 00:06:32,380
So I'm going to press S.

108
00:06:34,140 --> 00:06:38,070
And then I'm going to pull them into place, so they need to come down a little bit, as you can say,

109
00:06:38,610 --> 00:06:39,810
and we're just getting them into place.

110
00:06:39,810 --> 00:06:44,700
Once we've done that, then we can work on how big or small we actually want them.

111
00:06:45,690 --> 00:06:48,690
So I know it's just the first thing is that this is not enough.

112
00:06:48,690 --> 00:06:53,250
So I'm just going to grab this and pull it down a little bit and I'm going to make these stickers all

113
00:06:53,250 --> 00:06:54,840
the way, way too thin at the moment.

114
00:06:54,840 --> 00:06:57,320
And I need to put them underneath this step.

115
00:06:57,480 --> 00:07:01,350
So what I'll do is I'll grab this on the empty and pull it down.

116
00:07:01,350 --> 00:07:03,830
So it's on there and then let's make them thicker.

117
00:07:03,960 --> 00:07:09,420
So to do that, I want to grab the steps, press top Communispace select, grab the bomb.

118
00:07:09,660 --> 00:07:16,200
And because we using the array, modify anything we do to this top step will actually be carried over

119
00:07:16,230 --> 00:07:18,060
on to all of these arrayed.

120
00:07:18,300 --> 00:07:20,930
And then you can say that I need to bring this down further.

121
00:07:20,970 --> 00:07:25,500
So top bring it down and now it can say we're starting to get somewhere.

122
00:07:25,950 --> 00:07:26,430
All right.

123
00:07:26,430 --> 00:07:29,680
So now let's bevell this this step up here.

124
00:07:29,790 --> 00:07:33,030
So again, grab your steps in Europe.

125
00:07:33,030 --> 00:07:37,520
These two edges control be just Bevell them off a little bit.

126
00:07:37,980 --> 00:07:40,380
Now, of course, I don't want them.

127
00:07:40,710 --> 00:07:45,570
A massive gap in the wall I want to do is actually bring them out a little bit first.

128
00:07:45,570 --> 00:07:51,750
I think so we'll actually press controls that are not quite yet will come to face select grubbed this

129
00:07:51,750 --> 00:07:53,910
face and then to pull them out.

130
00:07:54,090 --> 00:07:55,680
You'll notice of I pull this out of the moment.

131
00:07:55,680 --> 00:08:02,730
It's actually pulling out along the Y axis and we don't really want that because this here is not in

132
00:08:02,730 --> 00:08:04,350
line with this y axis.

133
00:08:04,530 --> 00:08:10,530
So Tippex that will come this way, say global, come down to where you say normal and then you'll see

134
00:08:10,530 --> 00:08:18,120
that we can now pull it out on the actual axis following where this step is now.

135
00:08:18,120 --> 00:08:19,950
I think this looking much, much better.

136
00:08:20,790 --> 00:08:24,300
I do think that maybe you want to pull these out a little bit.

137
00:08:24,300 --> 00:08:25,290
So I want to grab the back.

138
00:08:25,300 --> 00:08:29,190
I'm going to pull it out a little bit just to get them more in line.

139
00:08:29,340 --> 00:08:31,440
And now, finally, I'm going to level this off.

140
00:08:31,440 --> 00:08:33,450
So I want to grab each one of these.

141
00:08:33,780 --> 00:08:40,500
I want to press control Bay Bevell them off like so just so then go back and touch in there and have

142
00:08:40,500 --> 00:08:43,500
a press stop and think I'm really, really happy with that.

143
00:08:43,500 --> 00:08:48,450
So you can see now in Congress on this side and this side, you can see what the steps are actually

144
00:08:48,450 --> 00:08:49,160
going to look like.

145
00:08:49,440 --> 00:08:49,890
All right.

146
00:08:49,890 --> 00:08:51,090
So I'm really happy with that.

147
00:08:51,090 --> 00:08:57,270
So we'll do in the next one is Will Michael seems and then we'll bring in the right material like we've

148
00:08:57,270 --> 00:08:57,860
done for this.

149
00:08:57,880 --> 00:08:58,660
OK, OK.

150
00:08:58,680 --> 00:09:00,930
Well, let's hope you enjoy that and I'll see you on the next one.

151
00:09:01,080 --> 00:09:01,650
Thanks a lot.

152
00:09:01,740 --> 00:09:02,190
Bye bye.
