1
00:00:09,860 --> 00:00:16,050
Welcome, everyone, back to 3-D modeling now he'll it does with blended two point nine and Adobe Photoshop.

2
00:00:16,070 --> 00:00:18,810
And here we find ourselves actually in Photoshop.

3
00:00:19,010 --> 00:00:24,360
So we brought now our actual door render all screenshot into here.

4
00:00:24,560 --> 00:00:29,090
So what I want to do is I want to make the pasta a little bit less just so I can actually work on this.

5
00:00:29,300 --> 00:00:31,130
So I want to come over to their pasta.

6
00:00:31,130 --> 00:00:34,790
Just make sure you've clicked on the right leg and just drop it down just a tiny bit.

7
00:00:34,970 --> 00:00:37,940
Something like 96 percent should be absolutely fine.

8
00:00:38,270 --> 00:00:42,830
Next, what you want to do is make sure you've got your BROKAMP and but you've got moving on around

9
00:00:42,830 --> 00:00:46,310
90 percent, basically the same setup as what we had before.

10
00:00:46,550 --> 00:00:47,800
Now let's start.

11
00:00:47,990 --> 00:00:54,170
So basically, if we quickly just make a kind of reference of where we want to do so, you can see that

12
00:00:54,170 --> 00:00:58,190
as well, that my brush is actually on opacity layer as well.

13
00:00:58,200 --> 00:01:01,050
So I want to make a new layer just to actually create this.

14
00:01:01,080 --> 00:01:02,150
So I'm going to do it.

15
00:01:02,180 --> 00:01:09,440
I want to come in and just make a rough kind of placement of where I want these to actually be.

16
00:01:09,470 --> 00:01:16,490
So if you can see I'm going to be going round here, I'm probably going to be ending somewhere around,

17
00:01:16,490 --> 00:01:21,980
let's say, here like so and then I'm going to come with this one and going, don't want this one to

18
00:01:21,980 --> 00:01:22,390
comb.

19
00:01:22,400 --> 00:01:25,960
So I wanted to come down round full of that.

20
00:01:26,330 --> 00:01:28,490
And then around here, something like that.

21
00:01:28,790 --> 00:01:29,170
All right.

22
00:01:29,180 --> 00:01:30,580
So now I've got my rough placement.

23
00:01:30,580 --> 00:01:37,970
Now I recommend if you are not happy with it, just actually delete it so we can press it all, come

24
00:01:37,970 --> 00:01:41,500
over to our actual erase a pen over here.

25
00:01:41,630 --> 00:01:49,310
And if you're not happy, just go in and just Rubial Presby, then go back to your broche and just redo

26
00:01:49,310 --> 00:01:49,550
it.

27
00:01:49,760 --> 00:01:50,890
So the way that you like it.

28
00:01:51,440 --> 00:01:53,630
Now let's do the henges first.

29
00:01:53,870 --> 00:01:55,110
So we're doing the hinges.

30
00:01:55,140 --> 00:02:01,460
So I want my hinge basically on this bottom part to come probably somewhere around here and then on

31
00:02:01,460 --> 00:02:07,490
the top part, probably somewhere around here, you notice that this is probably a little bit too close

32
00:02:07,490 --> 00:02:08,360
to the actual wall.

33
00:02:08,570 --> 00:02:11,090
So I want to press E and just take that out.

34
00:02:11,480 --> 00:02:15,360
The let's bring in the hinge like so.

35
00:02:15,410 --> 00:02:17,390
And I think that should be absolutely fine.

36
00:02:17,570 --> 00:02:21,470
And it's going to give me enough room from the top and the bottom to to where we are now.

37
00:02:21,470 --> 00:02:24,410
Let's make some straight parts for our actual hinges.

38
00:02:24,590 --> 00:02:29,750
So I want to come in, put my mom down, pressed the ball and hold it and then drag across.

39
00:02:29,870 --> 00:02:32,240
And that will enable them to make a straight line.

40
00:02:32,240 --> 00:02:34,470
And that's exactly what we want for this image thing.

41
00:02:34,520 --> 00:02:35,480
Then do the same on here.

42
00:02:35,490 --> 00:02:37,280
So I want to press it on shift.

43
00:02:38,030 --> 00:02:39,320
Pull across now.

44
00:02:39,320 --> 00:02:41,110
Let's do the same on the bottom part.

45
00:02:41,120 --> 00:02:44,180
So press it shift, pull across.

46
00:02:44,510 --> 00:02:46,160
And I think that will be absolutely fine.

47
00:02:46,280 --> 00:02:51,980
Let's try this one because I'm slightly concerned I'm not actually going to get this in there.

48
00:02:52,850 --> 00:02:58,670
So we want to do is I'm going to basically bring it round and make that kind of swirl effect.

49
00:02:59,120 --> 00:03:05,270
And then when you come round and as I come around, I'm going to make you bigger, going back to the

50
00:03:05,270 --> 00:03:05,660
hinge.

51
00:03:05,660 --> 00:03:09,650
And again, don't worry if it's not quite the right size you're looking for.

52
00:03:10,160 --> 00:03:11,300
So something like that.

53
00:03:11,480 --> 00:03:13,250
And then what we'll do is I'll bring this part.

54
00:03:13,280 --> 00:03:13,640
How?

55
00:03:15,050 --> 00:03:20,990
And make this as well as well and then bring it round and get bigger as I come, and then I'm just going

56
00:03:20,990 --> 00:03:24,650
to make a little circle, they're not sure whether I'm going to keep this.

57
00:03:24,660 --> 00:03:27,320
Not sure whether I'm happy with this, but it's a good start.

58
00:03:27,620 --> 00:03:35,240
So on this bit now I want to bring pro-Israel out here, swell out here, something like that.

59
00:03:35,260 --> 00:03:37,760
I'm going to try and experiment with something.

60
00:03:38,240 --> 00:03:40,400
And I definitely want this to be a swell here.

61
00:03:40,970 --> 00:03:43,360
And then I'm going to bring this back now.

62
00:03:45,180 --> 00:03:47,730
So my actual hinge.

63
00:03:49,580 --> 00:03:54,740
Like, so now let's focus on this bit now, so I'm going to come out from here.

64
00:03:56,230 --> 00:03:58,480
So I'm going to come around.

65
00:04:01,300 --> 00:04:03,120
All the way around to here, no.

66
00:04:04,390 --> 00:04:05,020
Like, sir.

67
00:04:05,620 --> 00:04:07,540
All right, so now let's do these bits.

68
00:04:09,660 --> 00:04:15,060
And again, it's you can go over this as many times as you want, just try and get something that you

69
00:04:15,060 --> 00:04:15,960
actually happy with.

70
00:04:17,870 --> 00:04:21,860
And then we'll recommend you do once you've laid something down, it's come over to the left hand side,

71
00:04:21,860 --> 00:04:27,020
you have one that looks like a bucket click now and that is basically our paint bucket.

72
00:04:27,060 --> 00:04:31,370
Now, what you can do is you can go over as long as you've got no gaps in between these lines.

73
00:04:31,520 --> 00:04:33,800
Click it on and you'll see it fills in for you.

74
00:04:33,800 --> 00:04:37,250
So I'm just going to come in and fill all these in like so.

75
00:04:38,740 --> 00:04:42,540
And fill this one in on these two men as well.

76
00:04:43,660 --> 00:04:49,450
Like so and then I've got a much better idea of how it's actually going to look, OK, so now I've got

77
00:04:49,450 --> 00:04:50,350
something to work with.

78
00:04:50,380 --> 00:04:56,230
So now I'm going back to my brush and we're going to bring it in and just make Muswell.

79
00:04:56,240 --> 00:04:57,580
So something like this.

80
00:05:03,090 --> 00:05:11,100
So I'm not so sure if I'm happy with this as well here or this one here, look a bit to I'm going to

81
00:05:11,140 --> 00:05:11,850
focus well on.

82
00:05:11,850 --> 00:05:14,480
So let me see if I can go in and actually fix those first.

83
00:05:14,700 --> 00:05:19,200
It's slightly hard because we have got actual smoothing going.

84
00:05:19,440 --> 00:05:21,150
So I think I'm happy with this one, though.

85
00:05:21,150 --> 00:05:22,500
This one I'm definitely happy with.

86
00:05:22,590 --> 00:05:24,830
I just need to make a little bit thinner here, I think.

87
00:05:25,020 --> 00:05:28,980
Well, this one here suddenly I just need to do a little bit with also on this one, you'll notice that

88
00:05:29,100 --> 00:05:31,550
it is a little bit thick in comparison to this one.

89
00:05:31,680 --> 00:05:34,500
I think the thickness of this one I'm actually very happy with.

90
00:05:34,650 --> 00:05:38,010
So I'm going to do is going to press in bringing my razor.

91
00:05:38,190 --> 00:05:40,290
I'm just going to raise those out like so.

92
00:05:41,070 --> 00:05:45,030
And then what else I'm going to do is I'm going to just make this a little bit thinner now, trying

93
00:05:45,030 --> 00:05:46,580
to make this than is this one here.

94
00:05:46,590 --> 00:05:52,080
So it's because we're actually trying to get one going into it, whereas here we've got two.

95
00:05:52,110 --> 00:05:55,940
So let's come in now and just make it a little bit thin.

96
00:05:58,510 --> 00:06:04,440
Like, so just work on it going, OK, let's come down as well.

97
00:06:06,060 --> 00:06:09,250
Like so and then let's make this a little bit smoother.

98
00:06:10,020 --> 00:06:11,460
So it needs to be seen here.

99
00:06:12,720 --> 00:06:19,200
Go, we know, and then I think maybe I've gone a little bit too much here, but as I say, I'm not

100
00:06:19,200 --> 00:06:22,430
going to worry about him, I'm just going to try and get it to where I like it.

101
00:06:22,680 --> 00:06:24,600
And then on this, I'm actually going to.

102
00:06:26,410 --> 00:06:33,120
Culture away with my razor and now I'm looking for is is this this bit too lumpy here?

103
00:06:33,130 --> 00:06:38,890
So I think it is some just going around it off very slightly like so when I think this part I'm actually

104
00:06:38,890 --> 00:06:39,320
happy with.

105
00:06:39,880 --> 00:06:43,050
Now let's come to this party and look what's going on.

106
00:06:43,060 --> 00:06:47,350
So I'm just going to smooth it off a little bit like so.

107
00:06:47,470 --> 00:06:52,270
And you can see that just needs I think actually I need to come in and just make this again, going

108
00:06:52,270 --> 00:06:56,140
around like so I can say it's a it's a bit bad the more it was.

109
00:06:56,350 --> 00:06:59,470
And then what I love is I'll try one coming out here and that.

110
00:07:00,860 --> 00:07:01,610
Like so.

111
00:07:05,660 --> 00:07:09,900
So let's fill the in and now I think, yeah, I think that's looking much better.

112
00:07:10,130 --> 00:07:11,750
I'm happy with these two as well.

113
00:07:12,440 --> 00:07:13,400
Like maybe.

114
00:07:14,490 --> 00:07:20,040
Make them a little bit thicker, less warm, and this one ready for a raise in the mouth.

115
00:07:20,340 --> 00:07:20,760
All right.

116
00:07:20,760 --> 00:07:25,830
So now let's come in with the eraser again and let's raise this top one again with your razor as well.

117
00:07:25,840 --> 00:07:27,150
You can actually use the ship.

118
00:07:27,300 --> 00:07:30,870
So if you click shift, pull across, you'll see that it makes a nice straight line.

119
00:07:31,060 --> 00:07:32,330
I think I'll do that there as well.

120
00:07:32,340 --> 00:07:33,180
Nice straight line.

121
00:07:33,510 --> 00:07:36,720
And then let's do this top notch.

122
00:07:36,720 --> 00:07:42,300
So it's a off of let's pull in a hole here as well.

123
00:07:42,330 --> 00:07:46,140
Like so and now let's work on this bit going round.

124
00:07:48,830 --> 00:07:55,520
So and you can say that probably have to come in and this line that they can, so I'm just going to

125
00:07:56,630 --> 00:07:59,530
fight around with it, just making it as it wants it.

126
00:08:01,660 --> 00:08:07,780
And then I'll raise it out, and sometimes it's a bit it's kind of a bit tedious trying to get it the

127
00:08:07,780 --> 00:08:09,850
way you want it, but it's worth taking it time.

128
00:08:12,130 --> 00:08:15,490
Like, so I'm not smoking a much, much bad line, as you can see.

129
00:08:16,270 --> 00:08:19,720
All right, so and then Marasa.

130
00:08:26,230 --> 00:08:32,470
One year, that's looking much, much better again, I'm going to gap in here, so and I'm going to

131
00:08:32,610 --> 00:08:39,580
go down here and maybe the gap here as well, and that's giving it a lot more variance.

132
00:08:39,700 --> 00:08:41,490
And I'll also do the same thing.

133
00:08:41,540 --> 00:08:46,320
So we'll have to try to go up there and the gap here.

134
00:08:46,540 --> 00:08:47,950
And, yeah, that's looking much better.

135
00:08:48,160 --> 00:08:48,580
All right.

136
00:08:48,580 --> 00:08:51,820
So now let's finish with these parts, so we'll bring it round.

137
00:08:55,310 --> 00:08:56,120
Like so.

138
00:08:58,450 --> 00:09:03,820
Let's bring this poll around on this subject.

139
00:09:04,210 --> 00:09:09,230
It's very small, so I want to make my birthday a bit smaller, so I'm going to bring it in.

140
00:09:10,090 --> 00:09:11,620
The moment to do is try.

141
00:09:13,250 --> 00:09:19,880
Bring them in, OK, so I'm looking at this now, I'm thinking, am I happy with that?

142
00:09:20,120 --> 00:09:22,440
And I think I'm actually very happy with that.

143
00:09:23,510 --> 00:09:29,030
The one thing I'm kind of not be with is just this big in just wondering if I need to make my birthday

144
00:09:29,030 --> 00:09:31,100
a little bit bigger and just.

145
00:09:32,030 --> 00:09:35,410
Could not wait and see if it looks any better.

146
00:09:35,480 --> 00:09:41,660
Like I said, it's a bit of my experiment and as well and I actually think that I go back, I actually

147
00:09:41,660 --> 00:09:43,610
think it looks bad, not just this one.

148
00:09:43,610 --> 00:09:44,810
I need to pull out a little bit.

149
00:09:44,820 --> 00:09:48,350
So I'm just going to bring back my broche light.

150
00:09:48,360 --> 00:09:48,680
So.

151
00:09:49,100 --> 00:09:49,540
All right.

152
00:09:49,550 --> 00:09:54,530
So once you're happy with it again, we're going to do exactly the same thing as what we did for our

153
00:09:54,530 --> 00:09:55,640
stained glass window.

154
00:09:55,940 --> 00:09:59,930
So let's come in and make sure that we've got all if you right.

155
00:09:59,930 --> 00:10:01,670
Click quick selection tool on.

156
00:10:01,880 --> 00:10:06,680
And then what you're going to do is you're going to come in drag all the way down and you can see that

157
00:10:06,680 --> 00:10:09,890
it's not grumdahl someone to come in, grab it all the way down here.

158
00:10:11,320 --> 00:10:13,650
Come on, there we go now it scrubbed.

159
00:10:13,690 --> 00:10:15,740
I'll just make sure it's gold dropped like so.

160
00:10:16,030 --> 00:10:16,390
Right.

161
00:10:16,390 --> 00:10:20,950
Click And you're going to go down to make quick path like so click.

162
00:10:20,950 --> 00:10:28,380
OK, and then we go now multilayer come down new filea and we're going to make solid color.

163
00:10:29,530 --> 00:10:30,780
Let it up progress.

164
00:10:30,790 --> 00:10:31,360
OK.

165
00:10:32,650 --> 00:10:33,650
And there we go.

166
00:10:33,940 --> 00:10:36,480
Now let's make sure it's on black, like, OK.

167
00:10:37,480 --> 00:10:44,770
And now we'll do is we'll take of both of these, because now the CFG is ready to be sent out to file

168
00:10:45,220 --> 00:10:47,170
export export as.

169
00:10:48,510 --> 00:10:54,270
And again, this SFG will be available for you to download in case you haven't got yours or you like

170
00:10:54,500 --> 00:10:55,360
mine better.

171
00:10:55,560 --> 00:10:59,280
So what I'll do is make sure this is on SFG, go to export.

172
00:11:02,850 --> 00:11:09,630
And here is where L'Estang Blossoming Hummingbird is, I'm just going to change this to hinge henges,

173
00:11:09,630 --> 00:11:10,330
let's call it that.

174
00:11:11,130 --> 00:11:11,940
There we go.

175
00:11:14,260 --> 00:11:15,560
OK, so there we go.

176
00:11:15,760 --> 00:11:19,120
Now we'll do is we'll head on over to Blender in the next lesson.

177
00:11:19,240 --> 00:11:20,280
Hope you enjoyed that.

178
00:11:20,290 --> 00:11:21,370
I don't see on the next one.

179
00:11:21,430 --> 00:11:21,850
Thanks a lot.

180
00:11:22,180 --> 00:11:22,650
Bye bye.
