1
00:00:09,890 --> 00:00:10,770
Welcome back, everyone.

2
00:00:10,790 --> 00:00:14,720
So here we find ourselves back in Blender, and what we're going to do is we're going to do exactly

3
00:00:14,720 --> 00:00:15,840
kind of what we did before.

4
00:00:15,980 --> 00:00:21,770
The one thing I would say is you could make new collection to impulse in and it might make you a little

5
00:00:21,770 --> 00:00:23,210
bit cleaner so you can see what you're doing.

6
00:00:23,450 --> 00:00:26,990
I think for myself, I'm just going to leave it near the one thing.

7
00:00:26,990 --> 00:00:30,670
Amanda is just solid and that just enables me to see a little bit better.

8
00:00:30,860 --> 00:00:36,950
So all we do is to file come down to Interpol, I'm going to EMPL and Fiji, and then I'm just going

9
00:00:36,950 --> 00:00:38,880
to find the SFG that we've created.

10
00:00:38,900 --> 00:00:42,380
So I want to go, OK, I'm going to look and that's Fijis here.

11
00:00:42,530 --> 00:00:44,700
And then the henges is this one here.

12
00:00:45,110 --> 00:00:46,910
Now, as I said, you won't see anything.

13
00:00:46,910 --> 00:00:49,730
So I'm just going to hide the step, hide the door.

14
00:00:49,850 --> 00:00:52,010
And now I can actually see my hinge.

15
00:00:52,130 --> 00:00:53,210
So I'm going to move it out.

16
00:00:53,300 --> 00:00:54,470
I'm going to spin it round.

17
00:00:54,590 --> 00:01:01,010
And the one thing about the CGS and before you start is you'll notice again that if I pull it out,

18
00:01:01,010 --> 00:01:02,840
the actual orientation is set here.

19
00:01:02,960 --> 00:01:05,900
So let's right click the origin to geometry.

20
00:01:05,900 --> 00:01:06,700
Let's put it in the middle.

21
00:01:06,860 --> 00:01:09,800
Let's bring it out like so and I'm going to spin it round.

22
00:01:09,800 --> 00:01:17,180
So all X 90 and it should if I press one foot really, really nicely as I bring it out.

23
00:01:17,180 --> 00:01:21,130
So let's bring it out a little bit more now and look where this comes up to.

24
00:01:21,130 --> 00:01:24,440
So I'm going to pull it up to here and I think that's a little bit too much.

25
00:01:24,440 --> 00:01:26,090
I want to make a little bit smaller.

26
00:01:27,180 --> 00:01:31,500
Well, let's find where we actually want it, and you can use your reference as well to check out to

27
00:01:31,500 --> 00:01:32,790
see where exactly it was.

28
00:01:32,940 --> 00:01:36,300
And now let's to bring the doll back and there we go.

29
00:01:36,420 --> 00:01:37,980
And that's looking really, really nice.

30
00:01:38,190 --> 00:01:38,600
All right.

31
00:01:38,610 --> 00:01:42,660
So we're going to do what we did before, because if we press stop now, we can say are a lot of dots

32
00:01:42,660 --> 00:01:43,130
on here.

33
00:01:43,650 --> 00:01:44,730
We don't really want that.

34
00:01:46,410 --> 00:01:52,110
So let's come over once more to the top and we're going to put it on days like so, and I'm going to

35
00:01:52,110 --> 00:01:58,040
come up to and then we're going to press top come on, object, come down, convert Meche from code

36
00:01:58,170 --> 00:01:59,040
and there we go.

37
00:01:59,670 --> 00:02:05,900
Now, if I grab just my hinge, press a let's have a look.

38
00:02:05,910 --> 00:02:07,800
How many votes is there are.

39
00:02:07,800 --> 00:02:09,600
And you can see there's a hell of a lot.

40
00:02:09,780 --> 00:02:14,660
So now let's press delete, come down limits and dissolve and now let's build this in.

41
00:02:14,670 --> 00:02:17,580
So I'll fill in and there we go.

42
00:02:17,880 --> 00:02:23,310
Next, what we'll do is we'll come to select right click and Monkseaton next.

43
00:02:23,310 --> 00:02:27,540
What we'll do is fill in all these faces now so we'll press, alter and fill them all in.

44
00:02:27,870 --> 00:02:30,690
Now we'll be able to face right click.

45
00:02:30,690 --> 00:02:34,680
Come down, triangulate faces right click come down.

46
00:02:34,680 --> 00:02:36,680
Tries to Quad's and there we go.

47
00:02:36,960 --> 00:02:37,560
All right.

48
00:02:37,560 --> 00:02:40,500
So let's now pull it out to the thickness that we want it.

49
00:02:40,500 --> 00:02:46,020
So I'm simply going to press e pull it out like so now one Wednesday is going to press the on.

50
00:02:46,110 --> 00:02:47,550
I'm going to pull it into place.

51
00:02:48,480 --> 00:02:53,700
Just so it's actually leaning on the door, so let's pull it out a little bit, a little bit too far

52
00:02:53,700 --> 00:02:57,040
in there and look how thick it actually is.

53
00:02:57,090 --> 00:02:59,670
It might be too thick or you might be happy with it.

54
00:02:59,790 --> 00:03:03,610
I think I'm actually happy with our that's actually looking.

55
00:03:03,630 --> 00:03:06,720
I think it's maybe some slope.

56
00:03:07,380 --> 00:03:07,780
All right.

57
00:03:07,790 --> 00:03:09,150
I think that'll do for now.

58
00:03:09,270 --> 00:03:12,870
One thing we'll do is a come over material and just minus the oil.

59
00:03:12,990 --> 00:03:14,700
And then I can really, really see what I'm doing.

60
00:03:14,820 --> 00:03:21,990
And then when we're doing the right shades, move and then come over to my triangle like not so smooth.

61
00:03:22,530 --> 00:03:23,080
There we go.

62
00:03:23,520 --> 00:03:26,180
Now, what we need to do is we need to actually unwrap these.

63
00:03:26,190 --> 00:03:28,850
So I'm going to isolate out with a question mark.

64
00:03:28,980 --> 00:03:29,730
I'm going to come in.

65
00:03:29,910 --> 00:03:31,970
I know that I've got the top on the bottom.

66
00:03:31,980 --> 00:03:32,940
They will be isolated.

67
00:03:32,940 --> 00:03:33,660
Absolutely fine.

68
00:03:33,780 --> 00:03:37,980
What I want to do is now I want to make a seam so that we haven't got infinite loops going all around

69
00:03:37,980 --> 00:03:38,220
here.

70
00:03:38,390 --> 00:03:42,330
This place, again, to do it is in the corners where nobody can really see it join in.

71
00:03:42,480 --> 00:03:43,910
So you've got that corner there.

72
00:03:43,920 --> 00:03:45,260
Do you really need this corner here?

73
00:03:45,270 --> 00:03:46,170
I don't think so.

74
00:03:47,170 --> 00:03:51,940
But let's put one in here and then let's just work our way round one here.

75
00:03:51,970 --> 00:03:55,870
For instance, we could have one in there, but I don't think it's needed because it's such a small

76
00:03:55,870 --> 00:04:00,110
piece of mesh from there to there that you're probably better off just using these parts here.

77
00:04:00,520 --> 00:04:03,120
So let's come in and we'll come to here.

78
00:04:04,560 --> 00:04:06,360
And then I'll go round to.

79
00:04:07,430 --> 00:04:11,900
On this problem here, because this is going to be hidden by our hinge and then it's going to go all

80
00:04:11,900 --> 00:04:12,770
the way around.

81
00:04:13,860 --> 00:04:20,200
To this point here and probably this point here like so.

82
00:04:20,760 --> 00:04:21,960
All right, so that looks fine.

83
00:04:21,960 --> 00:04:22,410
So right.

84
00:04:22,410 --> 00:04:23,870
Click on Monkseaton.

85
00:04:24,200 --> 00:04:25,290
Now let's do the Bowmont.

86
00:04:25,470 --> 00:04:33,900
So we're definitely going to need one in here, one in here, and we'll bring it up to here and then

87
00:04:33,900 --> 00:04:37,380
I'll bring this to here and let's work all the way along.

88
00:04:38,420 --> 00:04:40,430
Underneath here and.

89
00:04:41,550 --> 00:04:43,740
Underneath you, right, click Moxey.

90
00:04:44,040 --> 00:04:51,420
All right, let's see what these on Rattly then, so grab them all with a uveitis saying let's isolate

91
00:04:51,420 --> 00:04:51,710
them out.

92
00:04:51,720 --> 00:04:54,180
So questionmark, let's press you on.

93
00:04:55,880 --> 00:05:00,320
There we go and we can see that everything straight and they look like they've unwrapped really, really

94
00:05:00,320 --> 00:05:00,810
nicely.

95
00:05:01,190 --> 00:05:07,280
OK, so the next thing I want to do then is basically bring in my material to put on these.

96
00:05:07,280 --> 00:05:09,020
So we'll go back to modeling for that.

97
00:05:09,050 --> 00:05:14,320
Now we're going to wrap them and we can come in and change my gloves if they're actually not big enough

98
00:05:14,330 --> 00:05:14,960
or small enough.

99
00:05:15,260 --> 00:05:18,810
So now let's head on over to the materials top and let's bring in material.

100
00:05:18,950 --> 00:05:22,690
Now, with the hinges, I've actually gave you two materials that you can use.

101
00:05:22,760 --> 00:05:24,800
We are going to use the actual metal.

102
00:05:24,960 --> 00:05:27,910
There's also a bronze on there as well, which you might like.

103
00:05:27,920 --> 00:05:30,070
There just be a way to use the bronze one.

104
00:05:30,200 --> 00:05:35,300
Just make sure that you the islands are actually expanded just that little bit bigger to make them fit.

105
00:05:35,300 --> 00:05:35,620
Fine.

106
00:05:35,810 --> 00:05:45,650
OK, so let's come over to plus new and we're just going to call this dark metal, then come over to

107
00:05:45,650 --> 00:05:46,160
Chaiten.

108
00:05:46,670 --> 00:05:48,770
I'm going to come to my principles.

109
00:05:48,770 --> 00:05:52,250
I'm going to zoom out a little bit, click on my principled control, shifty.

110
00:05:52,430 --> 00:05:58,000
And now let's go to our actual textures and you'll see the walnuts, black metal here.

111
00:05:58,010 --> 00:05:59,630
And this is the bronze one I'm talking about.

112
00:05:59,750 --> 00:06:02,950
Let's double click the black metal shift like the top one shift.

113
00:06:02,950 --> 00:06:06,440
Click the button, one click on the principled and that will bring them in.

114
00:06:06,620 --> 00:06:08,440
Now, we do need to do some alterations.

115
00:06:08,440 --> 00:06:10,820
So these you'll see when they come in, they're not quite right.

116
00:06:10,970 --> 00:06:14,180
We can actually put this as well onto our cycles.

117
00:06:14,180 --> 00:06:15,470
Let's see if it's on cycles.

118
00:06:15,470 --> 00:06:16,740
I think it's actually on Evarts.

119
00:06:16,770 --> 00:06:18,800
Let's come over and put it on cycles.

120
00:06:18,990 --> 00:06:25,370
The reason why one's cycles is the do look slightly different based on which actual renderer you're

121
00:06:25,370 --> 00:06:26,120
actually using.

122
00:06:26,210 --> 00:06:29,090
And in the end, I actually want to use the cycles renderer engine.

123
00:06:29,120 --> 00:06:33,290
As I say, I think it's a little bit bad for something like this.

124
00:06:33,290 --> 00:06:35,900
Then that's not to say it's not good or anything like that.

125
00:06:35,900 --> 00:06:36,680
It really is.

126
00:06:36,800 --> 00:06:39,680
Well, I know that from past students.

127
00:06:39,680 --> 00:06:41,240
Some of them want it in cycles.

128
00:06:41,240 --> 00:06:42,470
Some of them won't say anything.

129
00:06:42,590 --> 00:06:45,980
So this time we're going to focus actually on cycles.

130
00:06:45,980 --> 00:06:50,780
And as I say, just put this on eBay and work on this based on the Virender.

131
00:06:50,930 --> 00:06:53,510
So let's put this on cycles now and then.

132
00:06:53,510 --> 00:06:58,850
What I'm going to do is I'm going to stop the AI so you can see now can actually work on this without

133
00:06:58,850 --> 00:07:00,680
actually being highlighted, which is great.

134
00:07:00,770 --> 00:07:03,410
And then the first thing I'm going to do is bring in a gamma.

135
00:07:03,590 --> 00:07:09,320
So I'm going to shift a surge gamma, bring that and drop it in.

136
00:07:09,350 --> 00:07:13,640
I'm going to put this on nought point six like so.

137
00:07:13,730 --> 00:07:19,100
And then I'm going to do is I'm going to unplug the metal and I'm going to unplug the roughness.

138
00:07:19,610 --> 00:07:23,330
I want to set the metal all the way up to one and then the roughness.

139
00:07:23,330 --> 00:07:25,610
I'm going to put nought point nine, something like that.

140
00:07:25,610 --> 00:07:28,640
So let's nought point nine like so.

141
00:07:28,730 --> 00:07:31,070
And now you can see it really actually blends in.

142
00:07:31,070 --> 00:07:35,360
If I zoom out here, you can see actually really, really fits the scene really nicely.

143
00:07:35,450 --> 00:07:40,610
And now you can see that we did with it flowing around the actual window and things like that looks

144
00:07:40,610 --> 00:07:41,210
really nice.

145
00:07:41,330 --> 00:07:46,340
Now, the one thing, as I said, I would probably do, and this is I would probably come in and make

146
00:07:46,340 --> 00:07:49,660
these this window a little bit darker.

147
00:07:49,760 --> 00:07:54,650
And as I say, we're going to work on that as we get further on into actual rendering.

148
00:07:54,800 --> 00:07:57,730
So, again, if you want to bring your bronze in now, bring that in.

149
00:07:58,100 --> 00:08:02,630
Now, the last thing I want to do while I'm here is I want to come to my actual stone.

150
00:08:02,630 --> 00:08:06,920
So when you click on my stone, I'm going to come down to where it says my strength of mine.

151
00:08:06,920 --> 00:08:07,490
No, Momma.

152
00:08:07,580 --> 00:08:08,750
And you'll notice the pattern is.

153
00:08:08,750 --> 00:08:12,050
So it really, really brings this out a lot.

154
00:08:12,380 --> 00:08:17,540
Now, I don't want to on anything, mother, but I do want to hire than where it was on, which is one.

155
00:08:17,540 --> 00:08:21,650
So I'm going to bring you up slightly just to make a little bit bold bone pate.

156
00:08:21,740 --> 00:08:23,530
I'm really bring out that muscle a little bit.

157
00:08:23,540 --> 00:08:28,790
You can see now it's really starting to stick out a little bit and it looks a lot, lot better, especially

158
00:08:28,790 --> 00:08:30,240
when we start to get aggressive.

159
00:08:30,440 --> 00:08:30,860
All right.

160
00:08:30,860 --> 00:08:36,230
So now let's put it back onto texture and let's go back to Modlin.

161
00:08:37,330 --> 00:08:41,470
And then what we'll do is we'll press the question mark to bring everything back, put it back on Texture's

162
00:08:41,560 --> 00:08:43,130
and you should end up with something like that.

163
00:08:43,300 --> 00:08:47,740
So on the next lesson, what we'll do is we'll bring in some Boltz, we'll bring in our henges, and

164
00:08:47,740 --> 00:08:50,650
then we can make a start on our actual gross.

165
00:08:50,860 --> 00:08:51,540
OK, everyone.

166
00:08:51,550 --> 00:08:52,540
So I hope you enjoyed that.

167
00:08:52,540 --> 00:08:53,620
And I'll see you in the next one.

168
00:08:53,650 --> 00:08:54,200
Thanks a lot.

169
00:08:54,250 --> 00:08:54,700
Bye bye.
