1
00:00:09,980 --> 00:00:14,990
Welcome back, everyone, to 3D modeling The Hobbit doll scene with Blender two point nine and Adobe

2
00:00:14,990 --> 00:00:15,590
Photoshop.

3
00:00:15,920 --> 00:00:20,470
Now, let's actually work on these gadgets while facing Windows press time just to get that off.

4
00:00:20,630 --> 00:00:21,730
And I'm going to bring in a cube.

5
00:00:21,730 --> 00:00:23,240
So shift a mesh.

6
00:00:23,390 --> 00:00:24,380
Bring in a cube.

7
00:00:24,560 --> 00:00:26,350
Let's pull it out and pull it up.

8
00:00:26,450 --> 00:00:29,730
And now I just want to get this into kind of the shape of an actual hinge.

9
00:00:29,750 --> 00:00:35,360
So I want to press as to scale it in and then S and Z, just to pull it out a little bit, something

10
00:00:35,360 --> 00:00:35,830
like that.

11
00:00:35,990 --> 00:00:37,930
Now to make actual hinges.

12
00:00:38,120 --> 00:00:40,200
Well, basic hinges is very easy.

13
00:00:40,280 --> 00:00:42,170
All you tend to do is this one doing here.

14
00:00:42,320 --> 00:00:45,410
And then we'll press control also bringing edge loops.

15
00:00:45,410 --> 00:00:50,270
I'm going to bring in three left leg and you'll notice when you do left click, then you can freely

16
00:00:50,270 --> 00:00:51,080
move this round.

17
00:00:51,170 --> 00:00:55,220
But I want them back in the center so all I can do is click right, click on my mouth and that will

18
00:00:55,220 --> 00:00:56,840
drop them right in the center.

19
00:00:57,110 --> 00:01:03,080
Now, with these grubbed, I'm going to press control by pulling out something like that, and then

20
00:01:03,080 --> 00:01:04,750
you'll notice that we've actually beveled them off.

21
00:01:04,790 --> 00:01:06,950
But it's Bevell them off in a flat way.

22
00:01:07,370 --> 00:01:12,110
And now we'll need pressies E enter for Extrude S and pull them in.

23
00:01:12,320 --> 00:01:13,040
And there you go.

24
00:01:13,040 --> 00:01:17,860
You starting to get your actual hinges and now we need to do is just Bevill these off again.

25
00:01:18,140 --> 00:01:21,740
So I think that I'm going to bevell them off on each of these corners here.

26
00:01:21,890 --> 00:01:26,000
But before I do that, I might as well mark my seams is going to make it much, much easier.

27
00:01:26,210 --> 00:01:30,560
So I tend to do is I want to select and I'm going to go down each of these sides.

28
00:01:30,560 --> 00:01:32,780
So olt shifting click right click.

29
00:01:33,260 --> 00:01:34,790
Come down to where it says Maxime's.

30
00:01:35,090 --> 00:01:40,790
Now I want them open and go all the way around here and this place is going to be hidden within the

31
00:01:40,790 --> 00:01:41,090
wall.

32
00:01:41,360 --> 00:01:43,630
So now let's say think how are we going to do this.

33
00:01:43,630 --> 00:01:45,830
So if we open in here for instance.

34
00:01:45,830 --> 00:01:46,130
Right.

35
00:01:46,130 --> 00:01:52,790
Click and Moxey and then I'm just going to work my way around so I'll shift and click going all the

36
00:01:52,790 --> 00:01:53,880
way down here.

37
00:01:54,030 --> 00:01:54,470
Here.

38
00:01:56,250 --> 00:01:57,060
Like so.

39
00:02:00,040 --> 00:02:01,030
On this side.

40
00:02:04,900 --> 00:02:12,360
This side and of course, the bottom, and then what I want to do is right click and Moxey now on Wednesdays,

41
00:02:12,370 --> 00:02:13,930
I'm just going to click on these banks.

42
00:02:13,930 --> 00:02:16,490
I don't need these actual seems more.

43
00:02:16,840 --> 00:02:19,870
So we're going to take those off like so.

44
00:02:23,550 --> 00:02:28,260
Like, so, and that should be absolutely fine, so let's right click and clear themes on those ones

45
00:02:28,380 --> 00:02:30,810
and now let's actually unwrap these.

46
00:02:30,810 --> 00:02:33,780
So we'll grab the whole thing for you on Rob.

47
00:02:34,740 --> 00:02:37,600
And you'll see down he objects as non-uniform scale.

48
00:02:37,680 --> 00:02:42,390
So that means what we need to do is press the top gun control a transforms right.

49
00:02:42,400 --> 00:02:44,370
Click the origin to geometry.

50
00:02:44,520 --> 00:02:46,460
And now let's try again to unwrap them.

51
00:02:46,590 --> 00:02:50,860
So go back inside it mode you unwrap and now you've got no issues there.

52
00:02:51,060 --> 00:02:54,540
Let's now press the pause button and press the down arrow.

53
00:02:54,750 --> 00:02:57,300
We're going to look for a dark metal, so let's bring that in.

54
00:02:57,450 --> 00:02:59,940
And then what we're looking for is just to make sure that you're happy with it.

55
00:03:00,090 --> 00:03:01,980
Let's go over to and it's editing panel.

56
00:03:03,060 --> 00:03:07,110
Press the top on and let's zoom out and just make sure they're all in the right way, you can see the

57
00:03:07,110 --> 00:03:10,170
probably a little bit too big on the tube map.

58
00:03:10,170 --> 00:03:14,460
So I'm going to grab them, will shrink them down like so and just make sure that you're happy with

59
00:03:14,460 --> 00:03:14,730
them.

60
00:03:14,940 --> 00:03:16,980
And finally then I've got them in place.

61
00:03:17,070 --> 00:03:18,330
I want to bend this.

62
00:03:18,420 --> 00:03:19,980
So I want to bend it to get it in place.

63
00:03:19,980 --> 00:03:26,070
I'm going to press one and I'm going to press shift and spaceball move to I'll bring it out, make it

64
00:03:26,070 --> 00:03:26,490
smaller.

65
00:03:26,490 --> 00:03:29,430
So it fits this actual hinge here, as you can see.

66
00:03:29,580 --> 00:03:32,690
And you can see that it's it's kind of netspend in as well.

67
00:03:32,700 --> 00:03:36,690
So let's make it a little bit smaller first and now let's try and bend it into place.

68
00:03:36,690 --> 00:03:42,060
But we all do that because this one down here probably doesn't need bending as much or might be bending

69
00:03:42,060 --> 00:03:42,380
more.

70
00:03:42,480 --> 00:03:45,600
I'm going to shift deep and just bring in another one.

71
00:03:46,720 --> 00:03:51,760
Like, so now let's come to this one and let's bring that doll back so we can actually see where we

72
00:03:51,760 --> 00:03:52,450
need to bend it.

73
00:03:52,540 --> 00:03:56,460
So I'm going to do is I'm going to press the question marks, bring everything back once again.

74
00:03:56,770 --> 00:04:02,270
In fact, will but that are all fiction moving these into place before we actually bend them.

75
00:04:02,290 --> 00:04:08,160
So let's bring it into place like so let's press one now and we'll work on this one.

76
00:04:08,590 --> 00:04:09,690
So let's click on it.

77
00:04:09,970 --> 00:04:13,390
Let's first of all, rotate it so all X.

78
00:04:14,300 --> 00:04:20,570
So all I'm watching rotates it round and now let's bend it swung Wednesdays and when to grab a shift

79
00:04:20,570 --> 00:04:25,930
and click these two, I'm going to come to my proportional editing, which is this one here.

80
00:04:26,030 --> 00:04:31,190
Want to make sure this time it's on smooth and now I'm going to move these back shifts, spacebar again

81
00:04:31,190 --> 00:04:33,630
to bring in you move toll and then one which is going to press.

82
00:04:34,280 --> 00:04:38,990
And just try and bring that circle in like so just dependent.

83
00:04:39,110 --> 00:04:44,900
Now, you could do this with the modifier the bend fire, but because we're trying to follow actually

84
00:04:44,900 --> 00:04:50,300
this around here, it's probably not quite a bend or a uniform bend.

85
00:04:50,300 --> 00:04:53,630
So I'm just going to basically use this instead.

86
00:04:53,840 --> 00:04:54,260
All right.

87
00:04:54,260 --> 00:04:56,360
So let's have a look round if I can.

88
00:04:56,390 --> 00:05:01,310
So let me press the button just to zoom in and let's have a look how we're looking with that.

89
00:05:01,940 --> 00:05:05,370
And I'm looking to make sure that it's quite even on both of the sides.

90
00:05:05,630 --> 00:05:09,890
Now, what we need to do is now we need to bevell this all and we also need to level this one off,

91
00:05:09,890 --> 00:05:10,220
of course.

92
00:05:10,250 --> 00:05:11,970
But let's just get this one in place first.

93
00:05:12,020 --> 00:05:13,700
So let's come to this one now.

94
00:05:13,700 --> 00:05:19,280
I'm going to pull it up, try and get in some sort of place like so, and then I need to bend it.

95
00:05:19,280 --> 00:05:26,180
So I'm going to come in, grab this one on this one stogel proportion that it's in on the bring it out

96
00:05:26,840 --> 00:05:30,920
like so just making sure that it's stuck in the walls.

97
00:05:31,160 --> 00:05:36,290
You can also rotate as well so you can press all on one and rotate it like that just to make sure that

98
00:05:36,290 --> 00:05:36,830
it's going in.

99
00:05:37,700 --> 00:05:39,530
And then let's pull this one out.

100
00:05:39,530 --> 00:05:40,640
So I'm going to grab it here.

101
00:05:41,160 --> 00:05:46,820
I'm going to rotate it again so lines rotate it and make sure it's in the wall line.

102
00:05:46,850 --> 00:05:49,880
So I'm yeah, I think I'm actually happy with that double top.

103
00:05:49,880 --> 00:05:52,700
That's of a low and that's looking absolutely fine.

104
00:05:53,340 --> 00:05:53,780
All right.

105
00:05:53,780 --> 00:05:55,070
Let's join these two together.

106
00:05:55,250 --> 00:05:59,060
So Control join them both together and now we'll do is we'll bevelled them off.

107
00:05:59,060 --> 00:06:01,490
So questionmark, isolate them out.

108
00:06:01,760 --> 00:06:05,240
Let's come in and we'll take off proportional ladson.

109
00:06:05,270 --> 00:06:10,760
We'll make sure our Lexcen and you can do this in the movie panel or you can go back into modeling,

110
00:06:10,760 --> 00:06:16,280
whichever you find easiest one to do is I'm going to call each side now, so I'll shift and click going

111
00:06:16,280 --> 00:06:17,330
up each of the sides.

112
00:06:17,870 --> 00:06:19,100
I'll do the same on here.

113
00:06:20,390 --> 00:06:23,730
Like, so at the moment, there's just simply going to press control.

114
00:06:23,780 --> 00:06:29,530
They bring him in like so and now you can see the looking a lot more like now, obviously, as well.

115
00:06:29,540 --> 00:06:31,070
We need the top of the hinge bringing in.

116
00:06:31,250 --> 00:06:35,390
So what we'll do is we'll come to the top on the bottom like so.

117
00:06:37,690 --> 00:06:39,970
And we're going to just babble those in as well.

118
00:06:40,510 --> 00:06:42,550
Top of it, and then press control be.

119
00:06:46,900 --> 00:06:49,830
And then what we're going to do is press control be pulled out.

120
00:06:52,660 --> 00:06:53,950
Like something like that.

121
00:06:54,220 --> 00:07:00,160
All right, double top the bring back our door and what we'll do is we'll go to the muslin tub instead.

122
00:07:01,350 --> 00:07:08,520
Let's zoom in so don't born again and now let's move these off, so right click shapes move and let's

123
00:07:08,520 --> 00:07:10,290
come over to also SHMOO.

124
00:07:11,240 --> 00:07:11,870
Double tap the.

125
00:07:13,740 --> 00:07:19,710
Like so and then just mess around with your old system if you want them to move or less move, and if

126
00:07:19,710 --> 00:07:21,740
you do want these beveling off as well.

127
00:07:21,750 --> 00:07:26,640
So these parts on here, then we'll recommend you do is you press control like all transforms, right?

128
00:07:26,650 --> 00:07:28,110
Plake, Cerrejón.

129
00:07:29,470 --> 00:07:31,860
Do geometry and now come out it.

130
00:07:33,390 --> 00:07:39,810
To your actual modifieds panel, I'd modify it and let's bring in Abbeyville and then that will smooth

131
00:07:39,810 --> 00:07:40,260
those off.

132
00:07:40,500 --> 00:07:44,430
Now, the one thing you need to do is just make sure that you base it on the angle, because then it

133
00:07:44,430 --> 00:07:48,420
will make it easier and you won't end up with all these lines going around here.

134
00:07:48,420 --> 00:07:53,670
And basically now if you bring it down, as you'll see, you can smooth it off to where you want it.

135
00:07:53,700 --> 00:07:56,200
So I think if I double tap the A not.

136
00:07:56,220 --> 00:07:58,230
Yeah, I'm very, very happy with how that looks.

137
00:07:58,500 --> 00:08:02,580
Now, the one thing about the hinges is to look a little bit dull, but that's because they're actually

138
00:08:02,580 --> 00:08:04,070
round and this is actually flat.

139
00:08:04,200 --> 00:08:07,370
When we take the render, though, they should look absolutely fine.

140
00:08:07,860 --> 00:08:08,360
All right.

141
00:08:08,370 --> 00:08:13,410
So one of the last things that we need to do now, seen as we've nearly actually finished this build,

142
00:08:13,410 --> 00:08:17,730
is we need to just check to make sure all our normals are facing the correct way.

143
00:08:17,950 --> 00:08:19,560
So I'm going to put an example down here.

144
00:08:19,560 --> 00:08:23,850
What normals are able to check that all you do is you come up to the interlocking links, click the

145
00:08:23,850 --> 00:08:27,090
down narrow and you'll see one that says base orientation.

146
00:08:27,240 --> 00:08:30,180
Click now on and then that will show you where you've got all the problems.

147
00:08:30,180 --> 00:08:35,670
You can see we've got a few problems here with the doll, with the steps in the old and almost facing

148
00:08:35,670 --> 00:08:36,260
the wrong way.

149
00:08:36,330 --> 00:08:40,350
Also, this going round here, you must make sure that they're all facing the correct way.

150
00:08:40,530 --> 00:08:43,750
So let's now click on our return first and we'll do that one first.

151
00:08:43,750 --> 00:08:44,610
So we're going to come in.

152
00:08:44,910 --> 00:08:50,490
We're going to make sure on each leg I want to grab the whole of the red like so shift and and spin

153
00:08:50,490 --> 00:08:51,090
that round.

154
00:08:51,120 --> 00:08:56,490
I'm just looking to make sure none of the glass all this Malpas is the same and think I'm happy with

155
00:08:56,490 --> 00:08:56,970
that now.

156
00:08:57,090 --> 00:08:58,680
Now let's come to our doorstep.

157
00:08:58,860 --> 00:09:00,000
Those we can do together.

158
00:09:00,000 --> 00:09:06,210
So on my door to comments that press the top board A to grab everything, shift and spin everything

159
00:09:06,210 --> 00:09:06,510
around.

160
00:09:06,570 --> 00:09:07,530
And there we go.

161
00:09:07,690 --> 00:09:08,130
All right.

162
00:09:08,130 --> 00:09:13,680
So everything is facing the right way now and then we can come up and turn off our face orientation.

163
00:09:13,680 --> 00:09:15,150
And you're not just in a different place now.

164
00:09:15,150 --> 00:09:17,460
The only reason is in a different place because I'm still in edit mode.

165
00:09:17,580 --> 00:09:20,610
And if you're not in any mode, you'll see that there is again.

166
00:09:20,610 --> 00:09:23,190
So now you should see that looks a Tom-Tom there.

167
00:09:23,370 --> 00:09:25,930
Now, the last thing I want to do on here is you need some bolts.

168
00:09:25,950 --> 00:09:30,990
So what we'll do in the next lesson is actually bring those bolts in and finish off this door and then

169
00:09:30,990 --> 00:09:32,070
we can start on our ogress.

170
00:09:32,220 --> 00:09:33,990
OK, for once, I hope you enjoyed that.

171
00:09:33,990 --> 00:09:35,080
And I'll see you on the next one.

172
00:09:35,220 --> 00:09:35,820
Thanks a lot.

173
00:09:35,820 --> 00:09:36,270
Bye bye.
