1
00:00:09,920 --> 00:00:14,480
Welcome back, everyone, to 3D modeling the Hobbit doll scene with Blended two point nine and Adobe

2
00:00:14,480 --> 00:00:15,080
Photoshop.

3
00:00:15,320 --> 00:00:19,160
Now, what we want to do is want to put some bolts in the air just to make sure that the doll looks

4
00:00:19,160 --> 00:00:21,550
like it's actually being held on with something at the moment.

5
00:00:21,560 --> 00:00:25,030
It's just basically floating on top of the doorframe.

6
00:00:25,250 --> 00:00:27,920
So let's start out by pressing a ship.

7
00:00:27,920 --> 00:00:30,500
They what we can do is we're going to come to MASH.

8
00:00:30,510 --> 00:00:35,350
We're going to bring in a UV sphere and we're going to send these down because the way way too high

9
00:00:35,370 --> 00:00:35,780
the moment.

10
00:00:36,020 --> 00:00:36,910
Let's try to bring this on.

11
00:00:36,920 --> 00:00:39,860
Well, we'll put this on 12 as well.

12
00:00:40,040 --> 00:00:42,350
And then that should be absolutely fine for what we need.

13
00:00:42,470 --> 00:00:43,310
Let's spin it around.

14
00:00:43,310 --> 00:00:45,200
So all X 90.

15
00:00:45,980 --> 00:00:49,130
So it's facing the correct way now and then let's make it smaller.

16
00:00:49,340 --> 00:00:50,540
So the Esbjorn.

17
00:00:51,880 --> 00:00:54,950
Bring it up and let's make it small enough to where it's going to go.

18
00:00:54,980 --> 00:00:59,180
Let's pull out a little bit and what we're going to do now is actually get rid of the bulk of it.

19
00:00:59,200 --> 00:01:00,150
We don't need that.

20
00:01:00,160 --> 00:01:05,830
So I'm going to come in where the half way point is shifting, click, delete and faces.

21
00:01:05,950 --> 00:01:09,790
Now the back with Al delete that says.

22
00:01:09,910 --> 00:01:12,820
And now we've got our actual bolts ready to go.

23
00:01:13,060 --> 00:01:16,810
Now, I'm going to squeeze you in a little bit because it looks a little bit too fat going round.

24
00:01:16,810 --> 00:01:20,530
So s and why pull in just a tad?

25
00:01:20,890 --> 00:01:21,370
All right.

26
00:01:21,370 --> 00:01:24,700
So now we don't really need to mark any teams on this.

27
00:01:24,700 --> 00:01:29,830
We can simply press on ramp and then it's unwrapped and let's come in and bring the same material,

28
00:01:29,830 --> 00:01:31,590
which is the black metal.

29
00:01:31,720 --> 00:01:36,790
So we'll come over to our materials plus down narrow, dull metal.

30
00:01:37,060 --> 00:01:39,250
And then all we need to do is shade smooth.

31
00:01:39,550 --> 00:01:46,060
Now, one thing is just make sure that you're happy with the actual size on the movement, which I'm

32
00:01:46,060 --> 00:01:46,270
not.

33
00:01:46,270 --> 00:01:49,060
I think I need to in fact, we'll leave it as it is for now.

34
00:01:49,270 --> 00:01:52,660
I'll put these in place and then we can go and move them around.

35
00:01:52,930 --> 00:01:56,380
So I'm going to do is I'm going to put it, first of all, where I want it.

36
00:01:56,920 --> 00:02:00,180
So you can see it's way too big at the moment or press.

37
00:02:00,270 --> 00:02:02,680
Don't pull it out.

38
00:02:03,400 --> 00:02:04,480
Press the button.

39
00:02:06,110 --> 00:02:07,040
Hello again.

40
00:02:08,620 --> 00:02:13,490
Let's have a look what starts looking like a thing that is about the right size.

41
00:02:13,790 --> 00:02:19,810
So what we do is we press one pound, bring it up, and I think I'm going to put three down here.

42
00:02:19,850 --> 00:02:22,340
So you take one.

43
00:02:23,390 --> 00:02:26,870
So let's have a look at where he's going to be good.

44
00:02:28,660 --> 00:02:35,500
Three like so double tap the let's zoom out and yeah, thing that looks quite nice, I think the one

45
00:02:35,500 --> 00:02:40,780
issue I'm actually having with this is that it looks slightly up on the collar based on the angle of

46
00:02:40,780 --> 00:02:41,340
these parts.

47
00:02:41,350 --> 00:02:45,640
So I'm going to do is I'm actually going to call this new Dulmatin to.

48
00:02:47,210 --> 00:02:55,850
And why I'm doing this is so I can actually change this material to fit these parts more so I was going

49
00:02:55,860 --> 00:02:58,010
to do now I'm going to grab all of these.

50
00:02:58,350 --> 00:02:59,570
I want to grab the hinges.

51
00:03:00,020 --> 00:03:06,520
I'm going to press the top A and then I'm going to come down to Dalmau, too.

52
00:03:06,890 --> 00:03:07,570
And there we go.

53
00:03:07,580 --> 00:03:08,730
Now they've all been changed.

54
00:03:08,870 --> 00:03:12,350
Now, the one thing that I do need to do is I need to come back to my Dulmatin one.

55
00:03:12,710 --> 00:03:18,940
I need to copy the material, put it on two and then paste material like so.

56
00:03:19,250 --> 00:03:19,700
All right.

57
00:03:19,700 --> 00:03:21,060
So then we can work on those.

58
00:03:21,260 --> 00:03:25,830
Now, let's I think let's have a look if it needs three in there.

59
00:03:26,000 --> 00:03:26,360
All right.

60
00:03:26,360 --> 00:03:30,450
Let's work on the actual material now and then we can see what it's going to look like.

61
00:03:30,470 --> 00:03:34,760
So I want to click on one, come over to Chaiten DOT to zoom in.

62
00:03:35,270 --> 00:03:39,560
I'm going to put on my cycles render so I can see what I'm doing.

63
00:03:40,040 --> 00:03:42,650
I'm going to double tap the way we can.

64
00:03:43,220 --> 00:03:44,900
We can't really see it's one windows.

65
00:03:44,900 --> 00:03:46,010
I'm just going to move these out.

66
00:03:46,010 --> 00:03:49,550
So shift date, just duplicate them and put them in place.

67
00:03:50,430 --> 00:03:54,490
And then what I'm going to do is I'm going to come to where my cameras and let's have a look, which

68
00:03:54,490 --> 00:03:55,500
it's not coming down yet.

69
00:03:55,510 --> 00:03:56,200
That's the right way.

70
00:03:56,220 --> 00:03:59,030
So let's turn it over to let's have a look.

71
00:03:59,400 --> 00:04:00,960
Nought point five, a one.

72
00:04:00,960 --> 00:04:02,010
I think it's looking a bit better.

73
00:04:02,010 --> 00:04:05,370
Let's try nought point five five like so.

74
00:04:05,520 --> 00:04:06,240
And then we go.

75
00:04:06,240 --> 00:04:09,340
And now you can see the just being just that little bit bad.

76
00:04:09,480 --> 00:04:11,060
Now we've actually turned this down.

77
00:04:11,160 --> 00:04:13,710
So now let's go back to Modlin.

78
00:04:13,830 --> 00:04:16,420
And what we'll do is we'll just delete these ones.

79
00:04:16,470 --> 00:04:21,030
So I want to grab these press delete and now let's work on these images.

80
00:04:21,150 --> 00:04:25,590
So I think I'm going to bring in, I think, maybe two or three.

81
00:04:25,590 --> 00:04:26,750
Let's just delete that one.

82
00:04:27,030 --> 00:04:27,260
Yeah.

83
00:04:27,270 --> 00:04:29,610
And I think to back Shabad, I want to press ship.

84
00:04:29,610 --> 00:04:31,040
They bring it down.

85
00:04:34,250 --> 00:04:41,210
Like, so let's bring in another one so we shift day because it's flat, we know that they'll just basically

86
00:04:41,210 --> 00:04:42,720
come down to put them in place.

87
00:04:42,740 --> 00:04:49,430
I think a want one here and one here and then probably one on this corner here, maybe a little bit

88
00:04:49,430 --> 00:04:53,230
smaller as well as what we'll do is we'll press ship date and I'll bring it over.

89
00:04:53,990 --> 00:04:55,610
I'll put it in the place where I want it.

90
00:04:55,610 --> 00:04:57,170
I'm going to press Dot to zoom in.

91
00:04:57,380 --> 00:05:00,170
I'm going to make it slightly smaller like so.

92
00:05:00,290 --> 00:05:02,570
And I want to pull it out a little bit.

93
00:05:02,760 --> 00:05:03,430
All right.

94
00:05:03,440 --> 00:05:04,060
Like that.

95
00:05:04,670 --> 00:05:07,520
And then let's bring it up and put one in here.

96
00:05:07,520 --> 00:05:08,240
Let's say so.

97
00:05:08,250 --> 00:05:08,810
Shift date.

98
00:05:10,710 --> 00:05:16,010
Bring it up like so and then ship date, let's bring it all.

99
00:05:17,650 --> 00:05:20,100
And put it in place here.

100
00:05:21,530 --> 00:05:26,750
That I'm thinking, right, where else do I want to do I want these on each one of these or I'm happy

101
00:05:26,750 --> 00:05:32,090
with them being that again, let's have a check on our cycles, readiness of a little that looks like

102
00:05:32,780 --> 00:05:37,430
and you can say that they because it's some quite low sample, it's it's quite hard to pick them up,

103
00:05:37,580 --> 00:05:41,060
but I think actually they're going to look pretty nice on that.

104
00:05:41,180 --> 00:05:46,000
I think I need a few in these parts here and then I think we're done.

105
00:05:46,010 --> 00:05:48,650
So let's put it back on straight shifty.

106
00:05:49,130 --> 00:05:50,390
We'll bring them over.

107
00:05:51,970 --> 00:05:55,090
Let's put one here, Chef De.

108
00:05:57,450 --> 00:06:01,890
One here and then one here like so.

109
00:06:04,440 --> 00:06:05,010
Like, sir.

110
00:06:05,310 --> 00:06:07,470
All right, so let's join all these now.

111
00:06:10,750 --> 00:06:16,830
So I'm just shift like in all of these press control, Jay, and then I'm just going to block them.

112
00:06:16,840 --> 00:06:20,910
So I'm going to press just move and make sure I've got everything double something.

113
00:06:20,940 --> 00:06:22,520
I think I'm very happy with that.

114
00:06:22,840 --> 00:06:28,180
Now, before we move on to the grass, the one thing we should do or I always like to do is name everything

115
00:06:28,240 --> 00:06:32,230
and delete anything out of the scene that's not that shouldn't actually be there.

116
00:06:32,260 --> 00:06:36,060
Sometimes you end up with entities and things that there's basically no mesh there.

117
00:06:36,190 --> 00:06:37,760
Let's clean up all this as well.

118
00:06:37,900 --> 00:06:39,920
So first of all, let's come to our space.

119
00:06:39,930 --> 00:06:41,260
So this is hinges and bolts.

120
00:06:41,260 --> 00:06:43,540
So we'll rename this to Hinges and Bolts.

121
00:06:45,670 --> 00:06:50,610
And the reason I do this as well is that if I want to take any of these parts through to another BLENKIN

122
00:06:50,710 --> 00:06:55,090
or something like that, or if I want to take them through Sangrail, I know that everything is named

123
00:06:55,090 --> 00:06:55,750
correctly.

124
00:06:55,780 --> 00:06:58,960
So it's really important you just take the time to actually do so.

125
00:06:58,960 --> 00:07:02,030
Clophill is going to be well, these all the hinges.

126
00:07:02,050 --> 00:07:04,060
So do we join all these together?

127
00:07:04,070 --> 00:07:04,650
I think we will.

128
00:07:04,660 --> 00:07:10,690
So I'll do is I'll grab this one shipped like this one press control Jay and join those also control

129
00:07:10,690 --> 00:07:11,070
Jay.

130
00:07:11,170 --> 00:07:11,890
And there we go.

131
00:07:12,190 --> 00:07:16,960
OK, so the next thing I want to do is just come in and actually pull these named these ones.

132
00:07:16,960 --> 00:07:18,670
So these will be the hinge balls.

133
00:07:19,300 --> 00:07:23,040
So huge balls and I'm not going to join them with the bolts.

134
00:07:23,050 --> 00:07:24,070
I think I'll leave those.

135
00:07:24,220 --> 00:07:28,120
You can see, though, that we've got these into the hinge.

136
00:07:28,120 --> 00:07:31,680
So I'm just going to move the house on the right down the bottom, just move it out.

137
00:07:31,690 --> 00:07:36,700
So that was a like so and then in here, if I hide this, you can see nothing up in.

138
00:07:36,700 --> 00:07:38,400
Some guy's going to delete.

139
00:07:38,410 --> 00:07:45,220
Now, the way that we go now, we did forget to do one thing, and that is just to actually make all

140
00:07:45,220 --> 00:07:46,740
these edges a little bit smoother.

141
00:07:46,840 --> 00:07:53,830
So I'm going to do is going to select I'm going to select sharp edges like so so let's just grab one

142
00:07:53,830 --> 00:07:55,810
of them, like, so select.

143
00:07:57,130 --> 00:08:03,010
Select sharp edges like so, and then I'm just going to press control and just babble those off just

144
00:08:03,010 --> 00:08:08,980
very, very slightly like so double tap the I and now they're much, much better than what they did.

145
00:08:09,220 --> 00:08:09,640
All right.

146
00:08:09,650 --> 00:08:10,900
So I think I'm happy with that.

147
00:08:11,140 --> 00:08:12,910
Now, let's come to the next one.

148
00:08:12,980 --> 00:08:14,170
The next one is the circle.

149
00:08:14,170 --> 00:08:15,610
And this is the steps.

150
00:08:15,940 --> 00:08:18,280
So leanness steps.

151
00:08:18,520 --> 00:08:20,680
And again, I'm going to pull it down to the bottom.

152
00:08:21,040 --> 00:08:24,880
Now, Collection three hasn't got anything in it, so I can delete that out of the way.

153
00:08:24,880 --> 00:08:26,140
So come down, delete.

154
00:08:26,350 --> 00:08:30,730
And now let's open collection one so Cube Cube can stay as cube.

155
00:08:30,730 --> 00:08:35,760
Obviously this is the wooden door, so let's call it that wood and door.

156
00:08:37,650 --> 00:08:47,940
And let's come to the next one down, which is the stained glass stained glass window, and then let's

157
00:08:47,940 --> 00:08:52,860
come down to the arch so stone arch.

158
00:08:54,030 --> 00:08:56,450
And I think that is everything now.

159
00:08:56,580 --> 00:08:57,600
Yeah, that's everything.

160
00:08:57,720 --> 00:09:03,360
So what I tend to do now is I'll come in, I'll grab these three and I'll pull them up and drop them

161
00:09:03,360 --> 00:09:04,230
in the collection.

162
00:09:04,470 --> 00:09:07,380
And then what I'll do is I'll take a nother collection.

163
00:09:07,500 --> 00:09:08,230
So I'm going to close.

164
00:09:08,300 --> 00:09:11,430
I'll come over to watch the scene collection.

165
00:09:11,430 --> 00:09:11,680
Right.

166
00:09:11,680 --> 00:09:13,270
Click new collection.

167
00:09:13,530 --> 00:09:22,230
And this one we're going to call light and camera like so.

168
00:09:22,230 --> 00:09:26,870
And then this collection, which has everything named we'll call this Hobbit door.

169
00:09:26,970 --> 00:09:32,280
So I'm just going to double click it hobbit door like so.

170
00:09:32,460 --> 00:09:38,110
And now what we need to do is move out our sun and just drop it into all lights and camera.

171
00:09:38,400 --> 00:09:38,860
All right.

172
00:09:38,880 --> 00:09:40,650
So all that now is set up.

173
00:09:40,800 --> 00:09:45,720
Finally, let's save it out and then on the next one will start work on our actual grass.

174
00:09:45,900 --> 00:09:47,490
OK, once I hope you enjoyed that.

175
00:09:47,550 --> 00:09:48,600
And I'll see you on the next one.

176
00:09:48,720 --> 00:09:49,420
Thanks a lot.

177
00:09:49,440 --> 00:09:49,880
Bye bye.
