1
00:00:10,220 --> 00:00:14,900
Welcome back, everyone, to 3D modeling the Hobbit doll scene with Blended two point nine and Adobe

2
00:00:14,900 --> 00:00:15,470
Photoshop.

3
00:00:15,710 --> 00:00:17,090
Now this way we left off.

4
00:00:17,360 --> 00:00:19,910
What we need to do now is make a start on all grass.

5
00:00:20,090 --> 00:00:23,020
So grass actually isn't that hard if you know what you're doing.

6
00:00:23,120 --> 00:00:24,410
So let's make a start on it.

7
00:00:24,620 --> 00:00:30,530
What we'll do first of all, we'll bring in a UV sphere one minute actually do is just to reset to accommodate

8
00:00:30,530 --> 00:00:37,360
a file, come to actual save in the go file again, open recent Hobbit doll, reopen it.

9
00:00:37,490 --> 00:00:43,320
What that means is then when I bring in a UV space ship, they mesh down to this.

10
00:00:43,700 --> 00:00:49,310
You'll see that these have been reset, in other words, and on 12 and 12, like we had for the bolts.

11
00:00:49,340 --> 00:00:50,480
And that's exactly the one.

12
00:00:50,630 --> 00:00:53,840
So I'm going to do now I'm going to move this across over here.

13
00:00:54,020 --> 00:00:57,230
And this is going to be the basis from actual lacross.

14
00:00:57,380 --> 00:01:02,630
I want to press top then when it comes to proportional editing, and then I'm just going to grab this

15
00:01:02,780 --> 00:01:03,870
and just pull them over.

16
00:01:03,890 --> 00:01:10,040
So make my circle bigger like so and don't be afraid to mess around and really pull that mesh out.

17
00:01:10,370 --> 00:01:14,900
This is going to be your grass and we're going to mesh this as well.

18
00:01:15,080 --> 00:01:16,880
The very easy technique to do that.

19
00:01:17,390 --> 00:01:22,520
We just want to make sure that we don't bend it too much so it doesn't end up like he can see here.

20
00:01:22,610 --> 00:01:23,930
It's a little bit broken.

21
00:01:24,110 --> 00:01:25,520
That's not actually what we want.

22
00:01:25,520 --> 00:01:29,780
So I'm just going to go back and just make sure that I'm not breaking it that much.

23
00:01:29,780 --> 00:01:34,780
So I'm going to make perhaps this a little bit bigger like.

24
00:01:34,790 --> 00:01:37,340
So let's bring it out.

25
00:01:39,130 --> 00:01:40,030
Like so.

26
00:01:41,270 --> 00:01:42,320
Like so.

27
00:01:44,780 --> 00:01:47,020
And also, we're going to displace this as well.

28
00:01:48,140 --> 00:01:51,290
Which will make it, again, a little bit easier.

29
00:01:51,680 --> 00:01:54,080
All right, so I think let's have a look.

30
00:01:54,130 --> 00:01:55,730
I think I'm happy with that for now.

31
00:01:55,820 --> 00:02:00,310
Again, we're about to change this once we've actually reimagined it as well.

32
00:02:01,340 --> 00:02:06,320
The one thing I think I'm just not sure with is this a little bit too close to the actual steps.

33
00:02:06,320 --> 00:02:09,070
So let's bring it out, something like that.

34
00:02:09,090 --> 00:02:13,310
Let's bring this just down just to make it a little bit flat.

35
00:02:13,790 --> 00:02:15,590
Press three on the number pad.

36
00:02:15,850 --> 00:02:17,240
I'm just looking at where it comes out.

37
00:02:17,250 --> 00:02:19,490
So obviously, you not going to see the ball anyway.

38
00:02:19,580 --> 00:02:21,950
So I think that should be absolutely fine.

39
00:02:22,130 --> 00:02:23,730
Now, let's bring in another sphere.

40
00:02:23,750 --> 00:02:26,090
So shift a UV sphere.

41
00:02:26,340 --> 00:02:29,990
Let's move it across to this side.

42
00:02:30,120 --> 00:02:35,540
I think actually bear splitting it from this one so that when I use a portion that it's in, well,

43
00:02:36,140 --> 00:02:37,030
a different techniques.

44
00:02:37,040 --> 00:02:42,410
Let's bring it down to friends, place personal and it's known and just click connected only.

45
00:02:42,410 --> 00:02:45,440
And then I'm not going to interact with this one at the same time.

46
00:02:45,680 --> 00:02:54,110
So now let's start squishing this one round as well as play out a little bit so they all pull it out.

47
00:02:54,320 --> 00:02:57,920
That's where it's going to go and bend in a little bit.

48
00:03:01,140 --> 00:03:04,020
So and then I just want to make sure this Spetz.

49
00:03:05,030 --> 00:03:08,390
Housefly know a little bit like Mount.

50
00:03:09,400 --> 00:03:11,890
All right, so that's OK, that should be a good start.

51
00:03:12,040 --> 00:03:13,720
Now, what we need to do is we need to press top.

52
00:03:14,080 --> 00:03:20,230
Let's come over now to our little triangle and what you'll say is one that's called a rematch.

53
00:03:20,440 --> 00:03:21,310
Click the open.

54
00:03:21,520 --> 00:03:27,550
What are you going to do is you're going to click on Quad's, click on Quadri Flow, Ramesh Cherno,

55
00:03:27,700 --> 00:03:31,840
use paint symmetry and let's put it on something like two thousand.

56
00:03:31,840 --> 00:03:32,830
We don't want to that high.

57
00:03:32,860 --> 00:03:34,870
So two thousand should be absolutely fine.

58
00:03:35,020 --> 00:03:39,640
And they said this is a number of faces that you're going to end up with when you've actually rematch

59
00:03:39,640 --> 00:03:40,600
this next thing.

60
00:03:40,610 --> 00:03:44,410
Well, once the results come in, I want to click, OK, now it's going to think about who's going to

61
00:03:44,410 --> 00:03:46,540
take a little bit of time and now it's finished.

62
00:03:46,540 --> 00:03:50,680
If I press top, you can see now we've got a really, really nice base to actually work with.

63
00:03:50,830 --> 00:03:55,060
And this is the point where you want to be pulling these bits out that you have to wave.

64
00:03:55,060 --> 00:04:00,190
So like here, for instance, a press G to just pull it out just so.

65
00:04:02,050 --> 00:04:04,690
It's in front of that door and you love the grass growing up.

66
00:04:04,710 --> 00:04:05,870
I'm not saying that one.

67
00:04:05,910 --> 00:04:10,300
And again, with this one, I'm just refining it now, as you can see.

68
00:04:12,020 --> 00:04:13,110
Pull it out here.

69
00:04:14,030 --> 00:04:19,610
And again, we can pull this out to his heart's desire once we've actually got all grass in place now

70
00:04:19,610 --> 00:04:21,220
we've got two things left to do.

71
00:04:21,230 --> 00:04:23,530
So the first is we need to unwrap it.

72
00:04:23,660 --> 00:04:24,800
So I'm going to grab them both.

73
00:04:25,070 --> 00:04:28,040
I want to press you and this time I'm going to press smart.

74
00:04:28,040 --> 00:04:28,940
You've project.

75
00:04:29,060 --> 00:04:34,280
And the reason for that is when you use this, it actually splits of the mesh and breaks it up for you.

76
00:04:34,310 --> 00:04:37,670
So if I click the song, click, OK, come over to you.

77
00:04:37,670 --> 00:04:44,120
The editing, you'll see now that we've unwrapped it and it's basically broken the mole press dot on

78
00:04:44,120 --> 00:04:45,440
the number pad to go to it.

79
00:04:45,440 --> 00:04:46,100
Can't find it.

80
00:04:46,100 --> 00:04:48,080
Press the questionmark and there we go.

81
00:04:48,350 --> 00:04:52,760
So what it's done in this space and not to Malcolm, he seems very far away, are actually on wrapping

82
00:04:52,760 --> 00:04:57,380
it, but it does break you up and it should only be used in circumstances like this.

83
00:04:57,380 --> 00:04:58,560
It shouldn't be used all the time.

84
00:04:59,060 --> 00:05:00,620
Now, all I want to do is want to grab them.

85
00:05:00,890 --> 00:05:06,770
I want to really bring them out without proportion, let it's in on because I know how my grass is going

86
00:05:06,770 --> 00:05:07,380
to fit this.

87
00:05:07,670 --> 00:05:08,550
So there we go.

88
00:05:08,570 --> 00:05:10,370
Now let's bring in the material.

89
00:05:10,400 --> 00:05:13,850
So plus new let's call it Gruss.

90
00:05:16,010 --> 00:05:18,230
Let's come over now to Qadim panel.

91
00:05:18,590 --> 00:05:22,520
And all I want to do is bring in one actual gross material.

92
00:05:22,520 --> 00:05:29,780
So I think of a press control shifty and I'll go to my texture's you'll see one that says grass bring

93
00:05:29,800 --> 00:05:33,890
in and sometimes it won't bring in light says no matching images found.

94
00:05:33,980 --> 00:05:40,150
And that is basically because that grass hasn't got a name on the end of it, same colour.

95
00:05:40,160 --> 00:05:45,350
So they shouldn't know if it says colour on the N, normal on the end, ambient occlusion on the end,

96
00:05:45,530 --> 00:05:46,510
blender will pick you up.

97
00:05:46,730 --> 00:05:50,440
So that's a good tip in case you can't actually bring in an actual texture.

98
00:05:50,570 --> 00:05:53,860
So we'll do now is we'll go to the file and we'll bring in the old fashioned way.

99
00:05:54,380 --> 00:05:55,820
So here is all grass.

100
00:05:55,850 --> 00:06:00,800
So I'm going to do is I'm basically going to just left click drag and just drop it in place and they'll

101
00:06:00,800 --> 00:06:02,210
say actually drops in now.

102
00:06:02,400 --> 00:06:08,930
Now all I need to do is just pull the colour over and drop it into the base colour of the actual grass.

103
00:06:09,080 --> 00:06:10,780
Now, let's go back to our modelling.

104
00:06:10,790 --> 00:06:12,920
I don't need to mess around with anything else on here.

105
00:06:12,930 --> 00:06:13,910
So back to Modlin.

106
00:06:15,040 --> 00:06:16,410
Press the top on top the.

107
00:06:16,690 --> 00:06:19,960
And then you go, you can see our grass is looking really, really nice.

108
00:06:20,650 --> 00:06:25,830
And the thing is why it doesn't really matter about this being home wrapped or anything like that.

109
00:06:25,840 --> 00:06:31,570
As you'll see when I actually bring in the grass, the grass colors and things like just based on the

110
00:06:31,570 --> 00:06:32,940
colors of your textures.

111
00:06:32,940 --> 00:06:38,080
So the one thing I want to do is just shade it so smooth, so smooth, and you'll see like the little

112
00:06:38,080 --> 00:06:44,520
white bits in here, the little dark bits in here will actually come through on to the actual grass

113
00:06:44,530 --> 00:06:47,290
when we use the political system.

114
00:06:47,800 --> 00:06:52,020
But before that happens, we need to make this grass mounts a little bit lumpy.

115
00:06:52,030 --> 00:06:56,950
So let's come over to SPONER modifiers again and modify it.

116
00:06:56,950 --> 00:07:01,540
And this time we're going to bring into this place, you know, just get really far column down now

117
00:07:01,540 --> 00:07:03,210
to the actual texture.

118
00:07:03,280 --> 00:07:08,320
And basically you're deciding now what actual kind of noise texture you're going to put on this.

119
00:07:08,320 --> 00:07:11,440
So let's come to new click on that click down.

120
00:07:11,500 --> 00:07:14,320
And the one we are going to pick is going to be clouds.

121
00:07:14,320 --> 00:07:17,790
So let's pick clouds and you can see already looking really funky.

122
00:07:17,950 --> 00:07:21,510
Now let's come in and basically mess around with this here.

123
00:07:21,670 --> 00:07:25,740
So what we need to do is you need to turn this and I'm going to print one point eighty six.

124
00:07:25,930 --> 00:07:31,330
And now you can say that we've got some real lumpiness for grass really, really easily, perhaps a

125
00:07:31,330 --> 00:07:32,470
little bit too lumpy.

126
00:07:32,500 --> 00:07:37,180
So we need to do now is come over back to our spine and now we can mess around with the displacement.

127
00:07:38,320 --> 00:07:42,820
So I'm going to do is I'm going to send the strength down to nought point four to zero.

128
00:07:42,940 --> 00:07:48,130
And I can say it's still lumpy, but it's a lot smoother, like grass mounds would actually be.

129
00:07:48,220 --> 00:07:52,060
And I'm going to put this on nought point one to two and there we go.

130
00:07:52,180 --> 00:07:52,630
All right.

131
00:07:52,630 --> 00:07:53,790
So I'm really happy with that.

132
00:07:53,950 --> 00:07:59,080
So this is going to be a short lesson, because on the next lesson, I want to actually start bringing

133
00:07:59,080 --> 00:08:01,770
in the actual political systems and our graphs.

134
00:08:01,900 --> 00:08:03,160
So I hope you enjoyed that.

135
00:08:03,220 --> 00:08:06,430
And I'm sure you can enjoy the next lesson, say, on the next one, everyone.

136
00:08:06,430 --> 00:08:07,510
Thanks, Lullabye.
