1
00:00:10,010 --> 00:00:14,630
Welcome back, everyone, to 3D modeling The Hobbit doll scene with Planet two point nine and Adobe

2
00:00:14,630 --> 00:00:15,340
Photoshop.

3
00:00:15,380 --> 00:00:17,770
And we're nearly there and this is where we left off.

4
00:00:17,900 --> 00:00:24,210
So we know that we need to make these a lot, lot darker to actually fit within our cycles render.

5
00:00:24,350 --> 00:00:26,220
So what we'll do is we'll come to augment.

6
00:00:26,510 --> 00:00:30,210
I want to press control, see, and then one which is going to come to the next one.

7
00:00:30,230 --> 00:00:32,270
Now, I want to move this across a little bit.

8
00:00:32,540 --> 00:00:33,950
Click on here press control.

9
00:00:33,950 --> 00:00:36,500
They and I'm just going to drop that in place.

10
00:00:36,710 --> 00:00:38,860
Now, you can see that now a lot's happened there.

11
00:00:38,870 --> 00:00:41,810
So let's try actually let's go back.

12
00:00:41,810 --> 00:00:42,730
So controls that.

13
00:00:42,860 --> 00:00:44,120
Let me just take now a minute.

14
00:00:44,120 --> 00:00:47,640
I'm just going to check to see how much difference is made.

15
00:00:47,660 --> 00:00:50,150
So control V, let's drop it in place.

16
00:00:50,370 --> 00:00:52,040
It's made a little bit of difference.

17
00:00:52,590 --> 00:00:55,160
I'm just going to bring down.

18
00:00:56,320 --> 00:01:01,970
This orange a little bit over here like so, and I think that is looking actually better.

19
00:01:02,140 --> 00:01:03,740
Now let's come to our green.

20
00:01:03,880 --> 00:01:05,830
Same thing again, control.

21
00:01:05,830 --> 00:01:07,900
They drop it in place.

22
00:01:08,320 --> 00:01:09,160
Bring down.

23
00:01:10,620 --> 00:01:12,390
This volume here.

24
00:01:13,530 --> 00:01:18,180
OK, that's looking good now the green bird, so control the.

25
00:01:20,670 --> 00:01:23,010
And let's bring down the value.

26
00:01:24,300 --> 00:01:25,830
Yes, that's looking much better.

27
00:01:26,700 --> 00:01:27,930
Let's come to the red.

28
00:01:29,060 --> 00:01:33,270
Let me just say, if I can turn down the volume, actually, that makes it there.

29
00:01:33,410 --> 00:01:35,240
So this is the read of the bad.

30
00:01:36,550 --> 00:01:40,790
Like, so let's see what happens when you bring in a Gammie weight on the first one.

31
00:01:40,900 --> 00:01:43,320
It does have a little bit of difference, just not that much.

32
00:01:43,330 --> 00:01:44,830
So I think I'm happy with that.

33
00:01:45,070 --> 00:01:49,420
Let's come to the checkpoint now and I'll turn down my value.

34
00:01:50,430 --> 00:01:55,520
Like so and which one of go left the yellow, let's turn it down as well.

35
00:01:58,960 --> 00:02:04,030
A little bit too bright and there we go, a thing I was looking much, much better.

36
00:02:04,570 --> 00:02:05,140
All right.

37
00:02:05,140 --> 00:02:12,430
So now let's go back to Modlin and have a little that's looking like so I'm going to press top it's

38
00:02:12,430 --> 00:02:15,640
going to come back a little bit, put it on cycle's render again.

39
00:02:16,970 --> 00:02:24,050
And now I'm messing with is just looking around and looking, but see if it's all dark and things like

40
00:02:24,050 --> 00:02:28,760
that, looking in the sun, for instance, you can come over and change the sunlight over here and it

41
00:02:28,760 --> 00:02:30,090
might need a little bit more strength.

42
00:02:30,090 --> 00:02:33,430
So let's try to bring out the light a little bit more light.

43
00:02:33,440 --> 00:02:35,370
So I actually think that looks better.

44
00:02:35,750 --> 00:02:38,690
And let's also put it a little bit of warmth to the sun.

45
00:02:38,690 --> 00:02:39,910
So I'm clicking on my collar.

46
00:02:40,430 --> 00:02:43,310
I'm just going to bring it down a little bit more warmth.

47
00:02:43,310 --> 00:02:45,440
You can make it very warm like so.

48
00:02:45,470 --> 00:02:47,110
Well, that was way, way too much, of course.

49
00:02:47,330 --> 00:02:49,610
So just a little bit into the yellow light.

50
00:02:49,610 --> 00:02:49,910
So.

51
00:02:50,420 --> 00:02:50,830
All right.

52
00:02:50,840 --> 00:02:52,310
So now we'll do a test run.

53
00:02:52,440 --> 00:02:59,340
So I recommend, first of all, Cheminova clicking on your texture instead of your cycles.

54
00:02:59,360 --> 00:03:06,080
Render a shader because I tend to find this is on and you go to render it's actually going to make it

55
00:03:06,080 --> 00:03:08,260
take a lot, lot longer for some reason.

56
00:03:08,270 --> 00:03:09,980
So that's what to do next week.

57
00:03:09,990 --> 00:03:12,890
I tend to do now is change some of the options.

58
00:03:12,890 --> 00:03:19,700
So first of all, I like to put the Indonesian and the reason for that is that it makes it much, much

59
00:03:19,700 --> 00:03:24,200
quicker to render things out because you can render it a lot lower samples, because what it does is

60
00:03:24,200 --> 00:03:25,760
it gets rid of all the noise.

61
00:03:25,790 --> 00:03:26,830
And that's really important.

62
00:03:26,990 --> 00:03:30,130
I'll put an example down the hand side of exactly what I'm talking about.

63
00:03:30,410 --> 00:03:35,300
So what I'll do is I'll render animal on viewport, it should say automatic.

64
00:03:35,300 --> 00:03:39,080
And I'm just going to change that then to open image the other night.

65
00:03:39,320 --> 00:03:43,760
Now, the next thing I want to do is I want to think about what I'm going to actually render out with.

66
00:03:43,850 --> 00:03:49,460
And I tend to render my retinas out with my GPU, not my CPU.

67
00:03:49,580 --> 00:03:55,160
I find that render in as long as you've got a decent GPU is actually quicker than render now on your

68
00:03:55,160 --> 00:03:56,060
actual processor.

69
00:03:56,070 --> 00:04:00,770
So let's come over to edit preferences to make that open.

70
00:04:00,770 --> 00:04:05,570
And then what you're going to do is you're going to go to a system once you click on, you'll see one

71
00:04:05,570 --> 00:04:13,340
that says Cycle Devizes and you can put this on Khuda and then you can actually put in your actual CPU

72
00:04:13,490 --> 00:04:14,900
and your GPU.

73
00:04:15,050 --> 00:04:16,510
So you can see my GPU here.

74
00:04:16,670 --> 00:04:17,750
This is my GPU.

75
00:04:17,840 --> 00:04:22,760
And this GPU is actually pretty good at rendering things out so I can do nice, close that down and

76
00:04:22,760 --> 00:04:26,120
then one when to do and when it comes down to performance.

77
00:04:26,120 --> 00:04:29,960
And we're just going to change this to 32 by 32.

78
00:04:30,140 --> 00:04:36,080
Now if you render not in your GPU, it's normally better to have these lower so lower little squares

79
00:04:36,080 --> 00:04:37,040
actually render now.

80
00:04:37,130 --> 00:04:42,800
And if you render now on your CPU, it's normally bad to have these much, much to two hundred and fifty

81
00:04:42,800 --> 00:04:44,560
six or something like that.

82
00:04:44,810 --> 00:04:48,590
Next want come down to where it says management.

83
00:04:48,810 --> 00:04:53,060
What I'm going to do is I'm going to turn this where says look down.

84
00:04:54,050 --> 00:04:59,420
Sorry to high contrast that on, you can see now you already get a difference, Lesterville, let's

85
00:04:59,420 --> 00:04:59,630
go.

86
00:04:59,630 --> 00:05:01,580
Not make sure that you're in there now.

87
00:05:01,610 --> 00:05:05,030
One hundred and twenty eight samples, because that will be nice and fast.

88
00:05:05,030 --> 00:05:09,650
And I'll give you a good idea what the scene is going to look like before you render out in a much higher

89
00:05:09,650 --> 00:05:09,940
say.

90
00:05:10,160 --> 00:05:17,630
So let's come over, come to render a render image and let's have a look what we get from this low.

91
00:05:17,670 --> 00:05:18,790
Don't think about it.

92
00:05:18,950 --> 00:05:22,340
And as I say, what it will do will actually render out.

93
00:05:22,500 --> 00:05:24,980
And then you'll see that you've got one here that says Diana.

94
00:05:24,980 --> 00:05:25,370
Nice.

95
00:05:25,510 --> 00:05:30,120
So what it's doing is once it's rendered, those is actually going back over them and using the Diana

96
00:05:30,140 --> 00:05:32,290
Nyad to actually make it much, much cleaner.

97
00:05:32,300 --> 00:05:33,680
So let's say I have a lot of this.

98
00:05:33,680 --> 00:05:35,650
Looks like just going to zoom out a little bit.

99
00:05:35,750 --> 00:05:38,990
I'm going to speed you up for me and then we'll talk about this when it's finished.

100
00:05:50,930 --> 00:05:51,660
So there you go.

101
00:05:51,680 --> 00:05:54,630
That is the first very small sample.

102
00:05:54,650 --> 00:05:58,250
Now what you're looking for is just that you're happy with the actual shadow.

103
00:05:58,310 --> 00:06:01,550
So this is basically where is the sun casting the shadow?

104
00:06:01,670 --> 00:06:04,960
And I also think one thing we did forget is just to put a handle on this.

105
00:06:04,980 --> 00:06:09,500
I think we'll put a quick handle on here just to make sure that we've got a doorknob or something like

106
00:06:09,500 --> 00:06:09,770
that.

107
00:06:09,920 --> 00:06:12,830
And what I'm looking for is the direction of the shutter.

108
00:06:12,830 --> 00:06:17,240
I'm happy with it coming straight down, should it be more to the left hand side, things like that.

109
00:06:17,270 --> 00:06:19,780
I'm also looking with how bright this is.

110
00:06:19,820 --> 00:06:20,730
Is it bright enough?

111
00:06:20,750 --> 00:06:22,630
Does it need bright to know things like that?

112
00:06:22,700 --> 00:06:26,350
We can bring the whole scene quite easily with using our HDR.

113
00:06:26,690 --> 00:06:31,130
So let's now go back to one of the thing, of course, is this grass down here.

114
00:06:31,160 --> 00:06:32,720
It needs a little bit more to it.

115
00:06:32,730 --> 00:06:36,680
I've gone a bit too over the top and actually put it away where I shouldn't have done so.

116
00:06:36,680 --> 00:06:37,790
We can also saw that.

117
00:06:37,890 --> 00:06:41,270
So let's close that down now and let's start sorting these things out.

118
00:06:41,480 --> 00:06:44,030
So the first thing I saw is this grass down here.

119
00:06:44,040 --> 00:06:45,070
So let's press.

120
00:06:45,650 --> 00:06:50,560
Let's come in, come to collect it, and then let's come up to where it it's odd.

121
00:06:50,570 --> 00:06:55,250
You've got one that's called and and let's just add some particles around here just to make it a little

122
00:06:55,250 --> 00:06:55,850
bit better.

123
00:06:56,470 --> 00:06:59,720
Now, let's put that back on object mode.

124
00:07:00,140 --> 00:07:01,400
Let's have a look and then we go.

125
00:07:01,400 --> 00:07:02,860
We've got grass around there again.

126
00:07:03,380 --> 00:07:03,610
Yeah.

127
00:07:03,630 --> 00:07:05,260
And I think that's absolutely fine now.

128
00:07:05,480 --> 00:07:05,870
All right.

129
00:07:05,870 --> 00:07:08,010
So next thing we need to do is make that door handle.

130
00:07:08,180 --> 00:07:12,700
So what we'll do is we'll press shift a we're going to bring in a UV spear.

131
00:07:12,800 --> 00:07:13,940
I want to spin it round.

132
00:07:14,000 --> 00:07:15,560
I want to leave it on this amount.

133
00:07:15,560 --> 00:07:17,510
I think you might want to turn yours down.

134
00:07:17,510 --> 00:07:18,560
I think I'll leave you on this.

135
00:07:18,560 --> 00:07:25,280
So all X 90, let's make it small that a move that runyon's that did make it smaller.

136
00:07:27,030 --> 00:07:35,430
Oh, well, let's pull it out and we'll just make a quick handle on this, like, so so let's.

137
00:07:37,020 --> 00:07:42,340
Let's make it from such a look probably here, so we'll make it from here.

138
00:07:42,450 --> 00:07:50,040
So I'm going to grab these back ones, press delete faces around the back and delete faces.

139
00:07:50,400 --> 00:07:57,870
So I want to come in old shift and click I when I press enter, as you can see, proportional edits

140
00:07:57,870 --> 00:08:04,080
since so s so e pull out the NSA s.

141
00:08:05,010 --> 00:08:09,660
And E, I'm pulling back on the why, yes, it is the Y axis.

142
00:08:10,320 --> 00:08:12,640
So now let's make the smallest.

143
00:08:12,660 --> 00:08:13,470
I'm going to press one.

144
00:08:13,710 --> 00:08:15,270
I'm going to put this into place.

145
00:08:15,270 --> 00:08:20,100
And you can see that I do have a problem that when I pulled this one back, you can see that bent.

146
00:08:20,280 --> 00:08:21,090
I don't like that.

147
00:08:21,090 --> 00:08:25,890
So I'm just going to go back like so and I'm going to press e y.

148
00:08:27,110 --> 00:08:36,730
And then E and to s have a look and then e y pull it back like so and now you can say a press one.

149
00:08:36,740 --> 00:08:37,980
Yeah, that's much, much better.

150
00:08:38,240 --> 00:08:40,880
Now let's grab it and put it in place where it's going to go.

151
00:08:40,880 --> 00:08:42,380
So it's going to go somewhere around that.

152
00:08:42,560 --> 00:08:44,030
It's a little bit too big to fail.

153
00:08:44,510 --> 00:08:48,020
So it should be on one of these actual planks, not between it.

154
00:08:49,080 --> 00:08:50,450
So when let's put it back.

155
00:08:51,980 --> 00:08:57,500
And place and then just make sure they are actually happy with it and if it's too big, I think this

156
00:08:57,500 --> 00:08:59,060
is pulled out a little bit too much.

157
00:08:59,810 --> 00:09:02,240
So you could try a squishing down like.

158
00:09:02,240 --> 00:09:05,110
So that might be better to pull it back into place.

159
00:09:07,200 --> 00:09:12,480
Double tap, the top two will tap the I can actually think that looks nice.

160
00:09:12,630 --> 00:09:15,000
All right, so now let's lay this out quickly.

161
00:09:15,120 --> 00:09:23,250
So we're going to play smooth triangle, also smooth, and now we just need to warm up this sullenness

162
00:09:23,250 --> 00:09:25,790
can be a bit of a pain sometimes to unwrap.

163
00:09:26,800 --> 00:09:30,150
Let's come in and grab the easy ones first.

164
00:09:30,510 --> 00:09:31,220
Like so.

165
00:09:31,410 --> 00:09:33,180
Right, click Monkseaton.

166
00:09:33,330 --> 00:09:34,980
And now let's come to the actual summit.

167
00:09:35,220 --> 00:09:39,140
Well, first of all, try marking it from just the bottom.

168
00:09:39,150 --> 00:09:40,620
Sometimes it actually works.

169
00:09:40,830 --> 00:09:43,150
We just need to move this off because we don't need that.

170
00:09:43,170 --> 00:09:44,130
That actually.

171
00:09:44,400 --> 00:09:45,360
Does it seem so right.

172
00:09:45,360 --> 00:09:46,810
Click Moxey.

173
00:09:47,130 --> 00:09:56,340
Now let's go to UVA Edinson Dot to zoom in now to grab you on the top like so now let's bring in the

174
00:09:56,340 --> 00:09:56,820
material.

175
00:09:56,820 --> 00:10:05,280
So plus down arrow dot NetSol top and they go, you can see we do have a little bit of an issue here

176
00:10:05,460 --> 00:10:12,600
and sometimes we can fix this by simply just move in the UVA over a little bit or spin it round.

177
00:10:12,600 --> 00:10:18,870
So all night of spin it round and you can see now but double tap the I thought that is looking much

178
00:10:18,870 --> 00:10:19,140
better.

179
00:10:19,230 --> 00:10:21,840
You are going to end up with some kind of seam.

180
00:10:21,840 --> 00:10:29,430
Here is just how much seam you're prepared to accept so you can go in and basically just remove some

181
00:10:29,430 --> 00:10:30,020
of those.

182
00:10:30,210 --> 00:10:30,480
So.

183
00:10:30,480 --> 00:10:30,750
Right.

184
00:10:30,750 --> 00:10:33,450
Click play a seam, let's do it again.

185
00:10:33,450 --> 00:10:39,120
So you on the round all ninety spin it round top and there you go.

186
00:10:39,120 --> 00:10:41,940
You can see now we can barely see.

187
00:10:43,220 --> 00:10:44,600
The actual seam on that.

188
00:10:45,080 --> 00:10:50,840
All right, so again, on the next lesson, what we'll do now is we'll make sure everything's set up,

189
00:10:51,040 --> 00:10:56,290
all colors are right, and then do our final render and then take it through Photoshop.

190
00:10:56,450 --> 00:10:58,820
OK, so I hope you enjoy that sand the next one.

191
00:10:58,940 --> 00:10:59,550
Thanks a lot.

192
00:10:59,580 --> 00:10:59,980
Bye bye.
