1 00:00:09,860 --> 00:00:16,050 Welcome, everyone, back to 3-D modeling now he'll it does with blended two point nine and Adobe Photoshop. 2 00:00:16,070 --> 00:00:18,810 And here we find ourselves actually in Photoshop. 3 00:00:19,010 --> 00:00:24,360 So we brought now our actual door render all screenshot into here. 4 00:00:24,560 --> 00:00:29,090 So what I want to do is I want to make the pasta a little bit less just so I can actually work on this. 5 00:00:29,300 --> 00:00:31,130 So I want to come over to their pasta. 6 00:00:31,130 --> 00:00:34,790 Just make sure you've clicked on the right leg and just drop it down just a tiny bit. 7 00:00:34,970 --> 00:00:37,940 Something like 96 percent should be absolutely fine. 8 00:00:38,270 --> 00:00:42,830 Next, what you want to do is make sure you've got your BROKAMP and but you've got moving on around 9 00:00:42,830 --> 00:00:46,310 90 percent, basically the same setup as what we had before. 10 00:00:46,550 --> 00:00:47,800 Now let's start. 11 00:00:47,990 --> 00:00:54,170 So basically, if we quickly just make a kind of reference of where we want to do so, you can see that 12 00:00:54,170 --> 00:00:58,190 as well, that my brush is actually on opacity layer as well. 13 00:00:58,200 --> 00:01:01,050 So I want to make a new layer just to actually create this. 14 00:01:01,080 --> 00:01:02,150 So I'm going to do it. 15 00:01:02,180 --> 00:01:09,440 I want to come in and just make a rough kind of placement of where I want these to actually be. 16 00:01:09,470 --> 00:01:16,490 So if you can see I'm going to be going round here, I'm probably going to be ending somewhere around, 17 00:01:16,490 --> 00:01:21,980 let's say, here like so and then I'm going to come with this one and going, don't want this one to 18 00:01:21,980 --> 00:01:22,390 comb. 19 00:01:22,400 --> 00:01:25,960 So I wanted to come down round full of that. 20 00:01:26,330 --> 00:01:28,490 And then around here, something like that. 21 00:01:28,790 --> 00:01:29,170 All right. 22 00:01:29,180 --> 00:01:30,580 So now I've got my rough placement. 23 00:01:30,580 --> 00:01:37,970 Now I recommend if you are not happy with it, just actually delete it so we can press it all, come 24 00:01:37,970 --> 00:01:41,500 over to our actual erase a pen over here. 25 00:01:41,630 --> 00:01:49,310 And if you're not happy, just go in and just Rubial Presby, then go back to your broche and just redo 26 00:01:49,310 --> 00:01:49,550 it. 27 00:01:49,760 --> 00:01:50,890 So the way that you like it. 28 00:01:51,440 --> 00:01:53,630 Now let's do the henges first. 29 00:01:53,870 --> 00:01:55,110 So we're doing the hinges. 30 00:01:55,140 --> 00:02:01,460 So I want my hinge basically on this bottom part to come probably somewhere around here and then on 31 00:02:01,460 --> 00:02:07,490 the top part, probably somewhere around here, you notice that this is probably a little bit too close 32 00:02:07,490 --> 00:02:08,360 to the actual wall. 33 00:02:08,570 --> 00:02:11,090 So I want to press E and just take that out. 34 00:02:11,480 --> 00:02:15,360 The let's bring in the hinge like so. 35 00:02:15,410 --> 00:02:17,390 And I think that should be absolutely fine. 36 00:02:17,570 --> 00:02:21,470 And it's going to give me enough room from the top and the bottom to to where we are now. 37 00:02:21,470 --> 00:02:24,410 Let's make some straight parts for our actual hinges. 38 00:02:24,590 --> 00:02:29,750 So I want to come in, put my mom down, pressed the ball and hold it and then drag across. 39 00:02:29,870 --> 00:02:32,240 And that will enable them to make a straight line. 40 00:02:32,240 --> 00:02:34,470 And that's exactly what we want for this image thing. 41 00:02:34,520 --> 00:02:35,480 Then do the same on here. 42 00:02:35,490 --> 00:02:37,280 So I want to press it on shift. 43 00:02:38,030 --> 00:02:39,320 Pull across now. 44 00:02:39,320 --> 00:02:41,110 Let's do the same on the bottom part. 45 00:02:41,120 --> 00:02:44,180 So press it shift, pull across. 46 00:02:44,510 --> 00:02:46,160 And I think that will be absolutely fine. 47 00:02:46,280 --> 00:02:51,980 Let's try this one because I'm slightly concerned I'm not actually going to get this in there. 48 00:02:52,850 --> 00:02:58,670 So we want to do is I'm going to basically bring it round and make that kind of swirl effect. 49 00:02:59,120 --> 00:03:05,270 And then when you come round and as I come around, I'm going to make you bigger, going back to the 50 00:03:05,270 --> 00:03:05,660 hinge. 51 00:03:05,660 --> 00:03:09,650 And again, don't worry if it's not quite the right size you're looking for. 52 00:03:10,160 --> 00:03:11,300 So something like that. 53 00:03:11,480 --> 00:03:13,250 And then what we'll do is I'll bring this part. 54 00:03:13,280 --> 00:03:13,640 How? 55 00:03:15,050 --> 00:03:20,990 And make this as well as well and then bring it round and get bigger as I come, and then I'm just going 56 00:03:20,990 --> 00:03:24,650 to make a little circle, they're not sure whether I'm going to keep this. 57 00:03:24,660 --> 00:03:27,320 Not sure whether I'm happy with this, but it's a good start. 58 00:03:27,620 --> 00:03:35,240 So on this bit now I want to bring pro-Israel out here, swell out here, something like that. 59 00:03:35,260 --> 00:03:37,760 I'm going to try and experiment with something. 60 00:03:38,240 --> 00:03:40,400 And I definitely want this to be a swell here. 61 00:03:40,970 --> 00:03:43,360 And then I'm going to bring this back now. 62 00:03:45,180 --> 00:03:47,730 So my actual hinge. 63 00:03:49,580 --> 00:03:54,740 Like, so now let's focus on this bit now, so I'm going to come out from here. 64 00:03:56,230 --> 00:03:58,480 So I'm going to come around. 65 00:04:01,300 --> 00:04:03,120 All the way around to here, no. 66 00:04:04,390 --> 00:04:05,020 Like, sir. 67 00:04:05,620 --> 00:04:07,540 All right, so now let's do these bits. 68 00:04:09,660 --> 00:04:15,060 And again, it's you can go over this as many times as you want, just try and get something that you 69 00:04:15,060 --> 00:04:15,960 actually happy with. 70 00:04:17,870 --> 00:04:21,860 And then we'll recommend you do once you've laid something down, it's come over to the left hand side, 71 00:04:21,860 --> 00:04:27,020 you have one that looks like a bucket click now and that is basically our paint bucket. 72 00:04:27,060 --> 00:04:31,370 Now, what you can do is you can go over as long as you've got no gaps in between these lines. 73 00:04:31,520 --> 00:04:33,800 Click it on and you'll see it fills in for you. 74 00:04:33,800 --> 00:04:37,250 So I'm just going to come in and fill all these in like so. 75 00:04:38,740 --> 00:04:42,540 And fill this one in on these two men as well. 76 00:04:43,660 --> 00:04:49,450 Like so and then I've got a much better idea of how it's actually going to look, OK, so now I've got 77 00:04:49,450 --> 00:04:50,350 something to work with. 78 00:04:50,380 --> 00:04:56,230 So now I'm going back to my brush and we're going to bring it in and just make Muswell. 79 00:04:56,240 --> 00:04:57,580 So something like this. 80 00:05:03,090 --> 00:05:11,100 So I'm not so sure if I'm happy with this as well here or this one here, look a bit to I'm going to 81 00:05:11,140 --> 00:05:11,850 focus well on. 82 00:05:11,850 --> 00:05:14,480 So let me see if I can go in and actually fix those first. 83 00:05:14,700 --> 00:05:19,200 It's slightly hard because we have got actual smoothing going. 84 00:05:19,440 --> 00:05:21,150 So I think I'm happy with this one, though. 85 00:05:21,150 --> 00:05:22,500 This one I'm definitely happy with. 86 00:05:22,590 --> 00:05:24,830 I just need to make a little bit thinner here, I think. 87 00:05:25,020 --> 00:05:28,980 Well, this one here suddenly I just need to do a little bit with also on this one, you'll notice that 88 00:05:29,100 --> 00:05:31,550 it is a little bit thick in comparison to this one. 89 00:05:31,680 --> 00:05:34,500 I think the thickness of this one I'm actually very happy with. 90 00:05:34,650 --> 00:05:38,010 So I'm going to do is going to press in bringing my razor. 91 00:05:38,190 --> 00:05:40,290 I'm just going to raise those out like so. 92 00:05:41,070 --> 00:05:45,030 And then what else I'm going to do is I'm going to just make this a little bit thinner now, trying 93 00:05:45,030 --> 00:05:46,580 to make this than is this one here. 94 00:05:46,590 --> 00:05:52,080 So it's because we're actually trying to get one going into it, whereas here we've got two. 95 00:05:52,110 --> 00:05:55,940 So let's come in now and just make it a little bit thin. 96 00:05:58,510 --> 00:06:04,440 Like, so just work on it going, OK, let's come down as well. 97 00:06:06,060 --> 00:06:09,250 Like so and then let's make this a little bit smoother. 98 00:06:10,020 --> 00:06:11,460 So it needs to be seen here. 99 00:06:12,720 --> 00:06:19,200 Go, we know, and then I think maybe I've gone a little bit too much here, but as I say, I'm not 100 00:06:19,200 --> 00:06:22,430 going to worry about him, I'm just going to try and get it to where I like it. 101 00:06:22,680 --> 00:06:24,600 And then on this, I'm actually going to. 102 00:06:26,410 --> 00:06:33,120 Culture away with my razor and now I'm looking for is is this this bit too lumpy here? 103 00:06:33,130 --> 00:06:38,890 So I think it is some just going around it off very slightly like so when I think this part I'm actually 104 00:06:38,890 --> 00:06:39,320 happy with. 105 00:06:39,880 --> 00:06:43,050 Now let's come to this party and look what's going on. 106 00:06:43,060 --> 00:06:47,350 So I'm just going to smooth it off a little bit like so. 107 00:06:47,470 --> 00:06:52,270 And you can see that just needs I think actually I need to come in and just make this again, going 108 00:06:52,270 --> 00:06:56,140 around like so I can say it's a it's a bit bad the more it was. 109 00:06:56,350 --> 00:06:59,470 And then what I love is I'll try one coming out here and that. 110 00:07:00,860 --> 00:07:01,610 Like so. 111 00:07:05,660 --> 00:07:09,900 So let's fill the in and now I think, yeah, I think that's looking much better. 112 00:07:10,130 --> 00:07:11,750 I'm happy with these two as well. 113 00:07:12,440 --> 00:07:13,400 Like maybe. 114 00:07:14,490 --> 00:07:20,040 Make them a little bit thicker, less warm, and this one ready for a raise in the mouth. 115 00:07:20,340 --> 00:07:20,760 All right. 116 00:07:20,760 --> 00:07:25,830 So now let's come in with the eraser again and let's raise this top one again with your razor as well. 117 00:07:25,840 --> 00:07:27,150 You can actually use the ship. 118 00:07:27,300 --> 00:07:30,870 So if you click shift, pull across, you'll see that it makes a nice straight line. 119 00:07:31,060 --> 00:07:32,330 I think I'll do that there as well. 120 00:07:32,340 --> 00:07:33,180 Nice straight line. 121 00:07:33,510 --> 00:07:36,720 And then let's do this top notch. 122 00:07:36,720 --> 00:07:42,300 So it's a off of let's pull in a hole here as well. 123 00:07:42,330 --> 00:07:46,140 Like so and now let's work on this bit going round. 124 00:07:48,830 --> 00:07:55,520 So and you can say that probably have to come in and this line that they can, so I'm just going to 125 00:07:56,630 --> 00:07:59,530 fight around with it, just making it as it wants it. 126 00:08:01,660 --> 00:08:07,780 And then I'll raise it out, and sometimes it's a bit it's kind of a bit tedious trying to get it the 127 00:08:07,780 --> 00:08:09,850 way you want it, but it's worth taking it time. 128 00:08:12,130 --> 00:08:15,490 Like, so I'm not smoking a much, much bad line, as you can see. 129 00:08:16,270 --> 00:08:19,720 All right, so and then Marasa. 130 00:08:26,230 --> 00:08:32,470 One year, that's looking much, much better again, I'm going to gap in here, so and I'm going to 131 00:08:32,610 --> 00:08:39,580 go down here and maybe the gap here as well, and that's giving it a lot more variance. 132 00:08:39,700 --> 00:08:41,490 And I'll also do the same thing. 133 00:08:41,540 --> 00:08:46,320 So we'll have to try to go up there and the gap here. 134 00:08:46,540 --> 00:08:47,950 And, yeah, that's looking much better. 135 00:08:48,160 --> 00:08:48,580 All right. 136 00:08:48,580 --> 00:08:51,820 So now let's finish with these parts, so we'll bring it round. 137 00:08:55,310 --> 00:08:56,120 Like so. 138 00:08:58,450 --> 00:09:03,820 Let's bring this poll around on this subject. 139 00:09:04,210 --> 00:09:09,230 It's very small, so I want to make my birthday a bit smaller, so I'm going to bring it in. 140 00:09:10,090 --> 00:09:11,620 The moment to do is try. 141 00:09:13,250 --> 00:09:19,880 Bring them in, OK, so I'm looking at this now, I'm thinking, am I happy with that? 142 00:09:20,120 --> 00:09:22,440 And I think I'm actually very happy with that. 143 00:09:23,510 --> 00:09:29,030 The one thing I'm kind of not be with is just this big in just wondering if I need to make my birthday 144 00:09:29,030 --> 00:09:31,100 a little bit bigger and just. 145 00:09:32,030 --> 00:09:35,410 Could not wait and see if it looks any better. 146 00:09:35,480 --> 00:09:41,660 Like I said, it's a bit of my experiment and as well and I actually think that I go back, I actually 147 00:09:41,660 --> 00:09:43,610 think it looks bad, not just this one. 148 00:09:43,610 --> 00:09:44,810 I need to pull out a little bit. 149 00:09:44,820 --> 00:09:48,350 So I'm just going to bring back my broche light. 150 00:09:48,360 --> 00:09:48,680 So. 151 00:09:49,100 --> 00:09:49,540 All right. 152 00:09:49,550 --> 00:09:54,530 So once you're happy with it again, we're going to do exactly the same thing as what we did for our 153 00:09:54,530 --> 00:09:55,640 stained glass window. 154 00:09:55,940 --> 00:09:59,930 So let's come in and make sure that we've got all if you right. 155 00:09:59,930 --> 00:10:01,670 Click quick selection tool on. 156 00:10:01,880 --> 00:10:06,680 And then what you're going to do is you're going to come in drag all the way down and you can see that 157 00:10:06,680 --> 00:10:09,890 it's not grumdahl someone to come in, grab it all the way down here. 158 00:10:11,320 --> 00:10:13,650 Come on, there we go now it scrubbed. 159 00:10:13,690 --> 00:10:15,740 I'll just make sure it's gold dropped like so. 160 00:10:16,030 --> 00:10:16,390 Right. 161 00:10:16,390 --> 00:10:20,950 Click And you're going to go down to make quick path like so click. 162 00:10:20,950 --> 00:10:28,380 OK, and then we go now multilayer come down new filea and we're going to make solid color. 163 00:10:29,530 --> 00:10:30,780 Let it up progress. 164 00:10:30,790 --> 00:10:31,360 OK. 165 00:10:32,650 --> 00:10:33,650 And there we go. 166 00:10:33,940 --> 00:10:36,480 Now let's make sure it's on black, like, OK. 167 00:10:37,480 --> 00:10:44,770 And now we'll do is we'll take of both of these, because now the CFG is ready to be sent out to file 168 00:10:45,220 --> 00:10:47,170 export export as. 169 00:10:48,510 --> 00:10:54,270 And again, this SFG will be available for you to download in case you haven't got yours or you like 170 00:10:54,500 --> 00:10:55,360 mine better. 171 00:10:55,560 --> 00:10:59,280 So what I'll do is make sure this is on SFG, go to export. 172 00:11:02,850 --> 00:11:09,630 And here is where L'Estang Blossoming Hummingbird is, I'm just going to change this to hinge henges, 173 00:11:09,630 --> 00:11:10,330 let's call it that. 174 00:11:11,130 --> 00:11:11,940 There we go. 175 00:11:14,260 --> 00:11:15,560 OK, so there we go. 176 00:11:15,760 --> 00:11:19,120 Now we'll do is we'll head on over to Blender in the next lesson. 177 00:11:19,240 --> 00:11:20,280 Hope you enjoyed that. 178 00:11:20,290 --> 00:11:21,370 I don't see on the next one. 179 00:11:21,430 --> 00:11:21,850 Thanks a lot. 180 00:11:22,180 --> 00:11:22,650 Bye bye.