1
00:00:00,300 --> 00:00:11,970
To begin the configuration of Pi charm you need to open up the PI charm application from your Applications

2
00:00:11,970 --> 00:00:12,460
folder.

3
00:00:12,660 --> 00:00:14,880
So this is my applications for the.

4
00:00:15,030 --> 00:00:20,220
And this is Pi chomp so I'm just going to click to launch pi charm.

5
00:00:20,460 --> 00:00:29,820
So when your lunch pi charm for the first time after installation you make this message pop up just

6
00:00:29,820 --> 00:00:31,630
click open.

7
00:00:31,630 --> 00:00:41,610
And that should begin the launch of Pi charm so you may get this option that comes up asking you to

8
00:00:41,670 --> 00:00:43,590
import settings.

9
00:00:43,650 --> 00:00:50,200
If this is the first time you are setting up pi chump there will be nothing to import.

10
00:00:50,280 --> 00:00:57,140
So just click okay and it give you this licensing agreement.

11
00:00:57,180 --> 00:01:07,110
Just click on the box that says I confirm that I have read and accept the terms of this user agreement.

12
00:01:07,110 --> 00:01:14,820
Once you've done that click continue and you get this option here if you want to send information and

13
00:01:14,820 --> 00:01:23,100
just click don't send so you'll get this interface about the key maps scheme and you have two options

14
00:01:23,100 --> 00:01:23,290
here.

15
00:01:23,280 --> 00:01:31,280
I've never used Pi chan before I use Pi chan before so I'll leave the default checked and just click.

16
00:01:31,280 --> 00:01:38,550
Next you can click to skip if you wish to do so and just accept or the default setting someone click

17
00:01:38,670 --> 00:01:39,340
next.

18
00:01:40,140 --> 00:01:48,260
And here it's talking about the UI theme A it basically is the background of the PI charm.

19
00:01:48,390 --> 00:01:54,930
If you want a lighter background this is how it will look if you prefer a darker theme which is checked

20
00:01:54,930 --> 00:01:55,550
on default.

21
00:01:55,560 --> 00:02:00,640
You can leave this darker time but you can always go back to change it later.

22
00:02:00,720 --> 00:02:07,800
It tells you where you can change it in the preferences on the appearance and behavior and then in the

23
00:02:07,800 --> 00:02:12,110
appearance but you can change the theme back if you want to switch.

24
00:02:12,120 --> 00:02:20,200
For now I'm going to accept the default theme and click next to launch script.

25
00:02:20,430 --> 00:02:27,570
Now basically is asking you to create a launch and scrip create a script for opening files and project

26
00:02:27,600 --> 00:02:29,100
if you wish to do so you can.

27
00:02:29,100 --> 00:02:32,220
If not you can skip it at this point.

28
00:02:32,220 --> 00:02:40,020
I'm going to click Skip and accept skip remaining and set the default because from now on it's not really

29
00:02:40,050 --> 00:02:46,740
that much to do you can always go back and change stuff later some will click on that and that would

30
00:02:46,860 --> 00:02:49,470
begin the launch of pie chart.

31
00:02:49,950 --> 00:02:57,150
So when you have these pie jumps scream launched first thing you want to do is configure so click on

32
00:02:57,150 --> 00:03:02,370
this configure port in here and under the configure.

33
00:03:02,370 --> 00:03:08,160
There is an option for preferences or click on preferences.

34
00:03:08,850 --> 00:03:09,820
Okay.

35
00:03:10,170 --> 00:03:13,200
And under preferences there's a lot of things you can do here.

36
00:03:13,200 --> 00:03:16,740
Again if you want to change the theme that's where you can change it.

37
00:03:16,770 --> 00:03:22,260
If you don't like the dark point you want to go light just click on the dropdown you have the option

38
00:03:22,260 --> 00:03:27,170
to change the different things you can also change here.

39
00:03:27,170 --> 00:03:27,580
Okay.

40
00:03:27,600 --> 00:03:30,160
You just feel free to look through at your convenience.

41
00:03:30,180 --> 00:03:35,580
But what I want to set up here is the interpreter interpreters.

42
00:03:35,580 --> 00:03:40,470
Basically what we interpret or the code to a right so that a computer can understand.

43
00:03:40,470 --> 00:03:45,680
So we need to set that up so click on here was called Project interpreter.

44
00:03:45,720 --> 00:03:49,890
Now there is an option if you've visited before.

45
00:03:49,890 --> 00:03:56,070
I'll give you the options if you click on the dropdown it will have the interpreter but because we've

46
00:03:56,100 --> 00:04:01,290
just set this up for the first time we need to select where the interpreter is.

47
00:04:01,350 --> 00:04:08,640
So normally you can select this from the directory where Python was installed so click on this option

48
00:04:08,640 --> 00:04:17,940
here and that will click add and that or kind of like give you this option where you can browse to aware

49
00:04:18,120 --> 00:04:22,210
Python was installed says telling you here.

50
00:04:22,500 --> 00:04:30,510
You can use the base interpreter which is located in this location here which is Python three point

51
00:04:30,510 --> 00:04:31,430
seven.

52
00:04:31,440 --> 00:04:35,850
Now this are like want to use the base interpreter.

53
00:04:35,850 --> 00:04:41,750
If you've used PI's charm before you can use the existing environment.

54
00:04:41,820 --> 00:04:44,980
Also here there are other options here.

55
00:04:45,030 --> 00:04:54,450
There is inherited global unsigned packages so if you want a package that you add to be inherited globally

56
00:04:54,450 --> 00:04:56,680
throughout the computer you can do that.

57
00:04:56,790 --> 00:04:59,070
You can make available to purchase.

58
00:04:59,070 --> 00:05:02,200
I'm gonna leave this option on checked for now.

59
00:05:02,220 --> 00:05:07,900
Because I don't know tie down to anything you can always go back later.

60
00:05:08,040 --> 00:05:12,610
Notice here we've got virtual EMV selected.

61
00:05:13,140 --> 00:05:17,360
If you want to create a virtual petrol enviromental I'll leave that for now.

62
00:05:17,370 --> 00:05:22,590
Don't want to complicate things so click on system interpreter.

63
00:05:22,920 --> 00:05:24,170
So this is the interpreter.

64
00:05:24,180 --> 00:05:29,670
I want the system to use you can see the interpreter selector despite on three point seven.

65
00:05:29,670 --> 00:05:32,240
I'm going to go with that click.

66
00:05:32,280 --> 00:05:34,220
Okay all right.

67
00:05:34,360 --> 00:05:36,510
And you can see is setting everything up.

68
00:05:36,510 --> 00:05:43,620
So now we've got the project interpreter so any time we are creating a project is going to interpret

69
00:05:43,640 --> 00:05:46,820
it using byte on three point seven.

70
00:05:46,890 --> 00:05:51,990
And these are the stuff packages that he's going to use as well.

71
00:05:51,990 --> 00:05:56,890
So once you don't just click Okay so that's the interpreter setup.

72
00:05:57,060 --> 00:06:02,490
We'll wait for it to finish updating the Python interpreter.

73
00:06:02,490 --> 00:06:11,880
Once that has finished updating a tool then give you back the original screen where you will have an

74
00:06:11,910 --> 00:06:16,750
option to create a new Python project.

75
00:06:16,830 --> 00:06:19,710
So it gives us a few minutes to complete.

76
00:06:19,950 --> 00:06:23,670
So now that has completed you back to the original screen here.

77
00:06:23,670 --> 00:06:26,830
Now we can go ahead and create a new project.

78
00:06:27,000 --> 00:06:30,670
So click on this button to create a new project.

79
00:06:30,810 --> 00:06:36,960
You have to give the project a name and it tells you this is the location where the project is going

80
00:06:36,960 --> 00:06:37,790
to be stored.

81
00:06:37,790 --> 00:06:42,350
So I'm just going to remove the default name which is untitled.

82
00:06:42,390 --> 00:06:46,360
I just call it Python course.

83
00:06:46,380 --> 00:06:51,030
All right and project interpreter.

84
00:06:51,450 --> 00:06:55,690
Click on this to rub down here to select the interpreter.

85
00:06:55,700 --> 00:07:03,810
I'm going to be using I will be using this one here existent interpreter which is piped on three point

86
00:07:03,810 --> 00:07:04,330
seven.

87
00:07:04,390 --> 00:07:06,900
That's the one I have checked.

88
00:07:06,900 --> 00:07:08,770
Click create.

89
00:07:09,640 --> 00:07:14,760
OK and that will create the new project you will get this welcome screen.

90
00:07:14,760 --> 00:07:18,410
Feel free to read through if not just close.

91
00:07:18,570 --> 00:07:19,350
You get this.

92
00:07:19,350 --> 00:07:28,380
Each time we open pi charm on less you on check this option here not to show it so click close and here.

93
00:07:28,380 --> 00:07:32,120
Basically you've got the project now being created.

94
00:07:32,250 --> 00:07:39,750
Next thing I want to do is create a python file so to do that you just right click on this project that

95
00:07:39,750 --> 00:07:47,580
I created called Python cause right click go here and there's an option for Python files so create that

96
00:07:48,210 --> 00:07:49,550
I'm just gonna give it a name.

97
00:07:49,590 --> 00:07:58,710
I call it greeting and it will save it with a dot P Y extension because it's a python file so I click

98
00:07:58,830 --> 00:08:02,020
okay and that or create the file.

99
00:08:02,050 --> 00:08:06,960
You can see he's created a file here called Great in the P Way which is here.

100
00:08:06,960 --> 00:08:10,590
So I'm just going to type in a simple code here.

101
00:08:10,620 --> 00:08:17,890
I'm just going to see print inside that print parentheses.

102
00:08:17,980 --> 00:08:21,900
I'm going to just say hello world.

103
00:08:21,940 --> 00:08:24,040
Just got a double P here.

104
00:08:24,070 --> 00:08:25,910
Need to get rid of one of the PS.

105
00:08:25,970 --> 00:08:26,310
All right.

106
00:08:26,310 --> 00:08:31,830
So that effectively is a complete Python statement.

107
00:08:31,830 --> 00:08:42,560
Just one line of code here to say hello world so I'll save that just to command an s.

108
00:08:42,690 --> 00:08:45,670
You can a window you do control an s.

109
00:08:45,720 --> 00:08:52,440
So now that has been save to run that we've got a little play button here but that play button is not

110
00:08:52,500 --> 00:08:55,520
activated the first time to activate it.

111
00:08:55,530 --> 00:08:59,780
You need to run the Perot file from here so right click on the file.

112
00:08:59,790 --> 00:09:08,010
This is great in the P Y and there's an option here that says you run greeting okay to click Run and

113
00:09:08,010 --> 00:09:08,780
you can see here.

114
00:09:08,790 --> 00:09:11,480
This area here is called the console.

115
00:09:11,970 --> 00:09:13,550
Oh right or the terminal.

116
00:09:13,560 --> 00:09:20,010
You can see is output ID this line of code here inside the terminal.

117
00:09:20,010 --> 00:09:27,510
This area here is called the terminal or the console where you can output the code that you run from

118
00:09:27,630 --> 00:09:37,140
within the ED the this area here also has the python console python console is different from the terminal

119
00:09:37,680 --> 00:09:40,580
python console is basically the python shell.

120
00:09:40,690 --> 00:09:43,560
If I click on this now you can see the shell.

121
00:09:43,560 --> 00:09:53,820
This is the interactive shell so if I see two plus two and compress into it to return for because this

122
00:09:53,820 --> 00:10:03,600
is an interactive python shell so I'm going to click on this exe to close the so this area is the editor

123
00:10:03,910 --> 00:10:04,470
area.

124
00:10:04,480 --> 00:10:09,710
See now that we've run the code the first time any time we want to run it again we don't need to right

125
00:10:09,710 --> 00:10:10,790
click on base.

126
00:10:10,940 --> 00:10:14,770
We can just go here you can see the file is highlighted here.

127
00:10:14,810 --> 00:10:19,790
If you have multiple files you want to run you can click on the dropdown and then select which one you

128
00:10:19,790 --> 00:10:24,820
want to run at the moment because we've already executed this file is showing up there.

129
00:10:24,820 --> 00:10:31,940
So if I want to run it again I just click on the play button and you can see here it's this place here.

130
00:10:31,940 --> 00:10:37,540
Notice also here it tells me the path where this file is tall.

131
00:10:37,550 --> 00:10:45,890
So if I wanted to run this file outside of this integrated development environment inside pi charm I

132
00:10:45,890 --> 00:10:53,110
just go to this location here and grab this file and then run it from my terminal.

133
00:10:53,120 --> 00:10:53,530
All right.

134
00:10:53,540 --> 00:10:56,740
So that's very important to know the location of the files.

135
00:10:56,750 --> 00:11:02,000
This file here great in the piece why he's located in this location.

136
00:11:02,660 --> 00:11:07,030
So that is it for this video in this video.

137
00:11:07,190 --> 00:11:09,330
We configure pi charm.

138
00:11:09,410 --> 00:11:15,080
We also created and run a python file.

139
00:11:15,080 --> 00:11:17,120
Thanks for watching and bye for now.
