1
00:00:00,630 --> 00:00:01,580
Hello and welcome.

2
00:00:01,620 --> 00:00:06,030
In this lecture we are going to convert to string.

3
00:00:06,030 --> 00:00:15,070
We are also going to truncate a value so I'm going to introduce another data type called double.

4
00:00:15,160 --> 00:00:23,970
We're going to try and convert that into an integer and integers and whole number and in the process

5
00:00:23,970 --> 00:00:29,570
of converting it it will be truncated.

6
00:00:29,640 --> 00:00:30,450
Okay.

7
00:00:30,540 --> 00:00:32,300
I've got visual studio open.

8
00:00:32,330 --> 00:00:35,370
And this is where we left off in our previous lectures.

9
00:00:35,370 --> 00:00:43,100
So I'm going to I'm going to comment out this code by doing two slashes and comment out on that as well.

10
00:00:43,230 --> 00:00:50,400
So what I'm gonna do I'm going to create new variables one to create a variable and the data type will

11
00:00:50,400 --> 00:00:53,020
be double.

12
00:00:53,760 --> 00:01:06,610
I'll give it a value of k I'll set the value to three point five semicolon at the end.

13
00:01:06,660 --> 00:01:15,150
Next hour reintroduce variable I and set this value to

14
00:01:18,050 --> 00:01:25,770
I'm going to pass it an integer value or set a value to be an integer of k.

15
00:01:25,770 --> 00:01:33,150
So basically what it will do it will convert this K here value into an integer an integer is a whole

16
00:01:33,150 --> 00:01:41,670
number and in the process of doing that it will truncate truncate means because a integer does not cannot

17
00:01:41,670 --> 00:01:42,720
read decimals.

18
00:01:42,740 --> 00:01:47,300
So it will just leave the point five out and only display the three.

19
00:01:47,310 --> 00:01:49,580
So that's what truncating means.

20
00:01:49,590 --> 00:01:57,560
So next we go to to introduce our result label.

21
00:01:57,900 --> 00:02:03,500
Remember we created the result label dot text so it takes in a text value.

22
00:02:03,510 --> 00:02:07,930
So we're going to eventually make this convert this value as well.

23
00:02:08,200 --> 00:02:17,370
Now set this to equal to the variable I as you can see as a red squiggly thing on the net because it's

24
00:02:17,370 --> 00:02:27,000
complaining that that local variable is an integer we cannot implicitly implicitly convert the type

25
00:02:27,120 --> 00:02:28,910
int to his drink.

26
00:02:29,280 --> 00:02:29,790
Right.

27
00:02:29,850 --> 00:02:35,580
We can using a helper method called two strings.

28
00:02:36,000 --> 00:02:45,900
So we're going to use a helper method to do the conversion so we can make it recognize a an integer

29
00:02:46,400 --> 00:02:57,260
and the way we do this where we've got I we just get rid of the semicolon and adopt.

30
00:02:57,540 --> 00:03:01,380
That would give us some intelligence points so this with what we want.

31
00:03:01,380 --> 00:03:09,640
We want to convert it to string due to string and place the semicolon.

32
00:03:10,410 --> 00:03:10,820
All right.

33
00:03:10,820 --> 00:03:19,120
So if I save that and execute this code it should output three.

34
00:03:19,410 --> 00:03:22,050
It would truncate the point five.

35
00:03:22,050 --> 00:03:22,410
All right.

36
00:03:22,410 --> 00:03:23,370
So that's what this is.

37
00:03:23,370 --> 00:03:25,170
So let me run that click on run

38
00:03:28,410 --> 00:03:37,300
so if I click Okay issued output three you can see is output at three but left out the point five.

39
00:03:39,430 --> 00:03:50,200
So so far we've been able to convert to string using the two string method is called a helper method.

40
00:03:50,200 --> 00:03:58,060
Okay so we're going to expand on the application further using the controls we created.

41
00:03:58,060 --> 00:04:04,210
So we are going to make it possible for a user to type in a number.

42
00:04:04,210 --> 00:04:09,790
Remember we created a text ball but we're going to configured it in such a way that a user can type

43
00:04:09,790 --> 00:04:16,910
in a number and we can perform calculation based on that number and then display the result.

44
00:04:16,990 --> 00:04:17,860
Okay.

45
00:04:17,950 --> 00:04:18,280
All right.

46
00:04:18,280 --> 00:04:25,020
So we will need to perform at least two types of conversion.

47
00:04:25,090 --> 00:04:31,180
So again the text box control stores user inputs into a string.

48
00:04:31,180 --> 00:04:37,730
So we want to convert that string into an integer in order to perform a calculation on it.

49
00:04:37,900 --> 00:04:41,710
The label controls stores result as a string.

50
00:04:41,710 --> 00:04:49,570
We will want to convert that result of the integer calculation back into a string.

51
00:04:49,570 --> 00:04:50,070
OK.

52
00:04:50,080 --> 00:04:59,220
So I'm going to comment out this line of code here and introduce some other code that we can use with

53
00:04:59,220 --> 00:05:02,590
our design controls.

54
00:05:02,590 --> 00:05:02,910
OK.

55
00:05:02,950 --> 00:05:05,400
So what I wanted we want to make this controls active.

56
00:05:05,470 --> 00:05:06,210
So.

57
00:05:06,550 --> 00:05:06,880
All right.

58
00:05:06,880 --> 00:05:13,420
So I'm going to introduce some more different variables here now to save time.

59
00:05:13,420 --> 00:05:15,370
I've already written the code here.

60
00:05:15,370 --> 00:05:20,000
So I've got some code here from line 27 to 30.

61
00:05:20,170 --> 00:05:24,230
So I've created another date a string type.

62
00:05:24,550 --> 00:05:34,240
And given it the variable value of i and I've set it to equal to the input text box dot text I've created

63
00:05:34,270 --> 00:05:41,970
a lot of variable called J which is an integer data type and I've set the value to equal to to int dot

64
00:05:41,980 --> 00:05:44,750
pass and past the value of i.

65
00:05:44,770 --> 00:05:48,140
Which is this textbook here.

66
00:05:48,640 --> 00:05:57,480
What we're doing here we're converting this string to an integer via the int dot pass.

67
00:05:57,580 --> 00:05:58,570
How permitted.

68
00:05:59,170 --> 00:06:07,780
OK so the int dot pass helper method is a bit different from the two string l permitted.

69
00:06:07,850 --> 00:06:14,290
Right we've used that earlier on this shows that the main difference is that the pass helper method

70
00:06:14,830 --> 00:06:26,220
comes from inside of the int class and takes in a string as an input in between the method parentheses.

71
00:06:26,260 --> 00:06:26,720
All right.

72
00:06:26,740 --> 00:06:32,410
So this I here is referring to this input text value.

73
00:06:32,410 --> 00:06:39,300
So with this piece of code here now the user input will be stored as an integer.

74
00:06:39,310 --> 00:06:40,220
All right.

75
00:06:40,240 --> 00:06:47,690
In the int j which is this one that will be stored as an integer and we can now perform calculations.

76
00:06:47,690 --> 00:06:48,160
All right.

77
00:06:48,160 --> 00:06:50,290
And display the result.

78
00:06:50,290 --> 00:06:54,610
True the label control which is this one here.

79
00:06:54,670 --> 00:06:54,990
All right.

80
00:06:55,060 --> 00:07:01,270
So we simply what we're doing here we're converting the K to a string.

81
00:07:01,270 --> 00:07:04,600
So let's save that and run the code.

82
00:07:04,600 --> 00:07:05,160
Okay.

83
00:07:07,570 --> 00:07:08,010
Okay.

84
00:07:08,020 --> 00:07:09,310
So this is the interface.

85
00:07:09,340 --> 00:07:17,110
If I'm typing because we've done the conversion to not be possible to type in values I type in 7 and

86
00:07:17,110 --> 00:07:17,840
click Okay.

87
00:07:17,850 --> 00:07:21,020
It should give me eight because of the code.

88
00:07:21,030 --> 00:07:31,440
There you go giving me eight typing in another value typing C6 you should give me seven.

89
00:07:31,550 --> 00:07:33,310
All right.

90
00:07:33,390 --> 00:07:37,640
The reason is adding an extra number is because of this code here.

91
00:07:37,650 --> 00:07:41,430
Line twenty nine so I've sent integer k so any value up.

92
00:07:41,460 --> 00:07:47,920
If I typed in as a K will give me the value of j plus 1.

93
00:07:48,030 --> 00:07:48,440
All right.

94
00:07:48,470 --> 00:07:53,520
So this J the integer here the pass method is doing the conversion.

95
00:07:53,520 --> 00:07:53,860
All right.

96
00:07:53,880 --> 00:07:57,960
So any thing are typing here as a J.

97
00:07:58,050 --> 00:08:00,800
It will add one to it.

98
00:08:00,810 --> 00:08:04,370
That's where we get in the the extra number from.

99
00:08:04,400 --> 00:08:10,980
So if I add for there and click okay it will give me five.

100
00:08:11,130 --> 00:08:15,940
What should happen if I type in a word for type in a word.

101
00:08:15,940 --> 00:08:19,360
Rick I should get an arrow and click Okay.

102
00:08:19,500 --> 00:08:25,750
Notice the vicious to do immediately give me an error is telling me what's going on there.

103
00:08:27,330 --> 00:08:35,250
You can see visual studio as highlighted where the problem is why it failed to at runtime is giving

104
00:08:35,250 --> 00:08:38,430
me the exception error.

105
00:08:38,430 --> 00:08:38,820
All right.

106
00:08:38,820 --> 00:08:49,830
So the problem is that the int dot pass method will only work when the string looks exactly like in

107
00:08:49,830 --> 00:08:59,160
no runtime errors are quite difficult to be caught by the compiler.

108
00:08:59,160 --> 00:09:04,290
We've seen the compiler errors before where you see read quickly bits before you actually compile your

109
00:09:04,290 --> 00:09:05,060
code.

110
00:09:05,430 --> 00:09:13,470
The runtime errors are much more difficult to catch and one of the ways to catch them is basically true

111
00:09:13,830 --> 00:09:21,270
rigorous testing and one of the things you could put in place is to perform some checks on basic checks

112
00:09:22,530 --> 00:09:30,210
to check some validation checks if a user provides set enabled input it will check the format make sure

113
00:09:30,210 --> 00:09:32,340
the input is correct or not.

114
00:09:32,340 --> 00:09:39,780
So this kind of validation will help you know address the runtime errors.

115
00:09:39,930 --> 00:09:44,320
So I'll just stop the code from running by clicking that.

116
00:09:44,490 --> 00:09:51,810
So I sit in this lecture we successfully converted integer to string.

117
00:09:51,810 --> 00:09:55,320
We also perform a truncation.

118
00:09:55,580 --> 00:09:57,290
So now set for this lecture.

119
00:09:57,300 --> 00:09:59,010
Thank you so much for watching.

120
00:09:59,010 --> 00:09:59,750
Bye for now.
