1
00:00:00,600 --> 00:00:11,190
Hello and welcome to this lecture on do while loops do while loops are slightly identical to the while

2
00:00:11,190 --> 00:00:13,940
loops.

3
00:00:14,010 --> 00:00:23,220
The main difference between the two while loops on the wire loops is that the dual while loops will

4
00:00:23,340 --> 00:00:34,970
evaluate the expression at the bottom of the loop while the while loop violates expression off the top.

5
00:00:35,700 --> 00:00:43,290
So what that means is that with a do while loop you almost guarantee that the statement within the do

6
00:00:43,290 --> 00:00:50,860
block are always executed at least once.

7
00:00:50,990 --> 00:00:57,160
Right so this was the code block we used for a while loop illustration.

8
00:00:57,180 --> 00:01:04,910
So I'm just gonna modify this code a little bit to illustrate the do while loop.

9
00:01:05,010 --> 00:01:07,470
So here I'm gonna change this count here.

10
00:01:07,480 --> 00:01:17,390
Will it change the count values to 4 and here instead of a while I'm just gonna type in a DO

11
00:01:21,630 --> 00:01:23,870
AND I'M NOT GOING TO.

12
00:01:23,910 --> 00:01:25,280
THERE'S NOT GONNA BE ANY

13
00:01:28,610 --> 00:01:34,280
no conditions set there because it will evaluate the condition at the bottom here.

14
00:01:34,290 --> 00:01:37,200
So this message will leave here.

15
00:01:37,200 --> 00:01:38,500
So here's to mess.

16
00:01:38,520 --> 00:01:45,250
This is a code that will execute if the expression I'm going to specify in the while loop in the while

17
00:01:45,270 --> 00:01:53,390
condition is true so it will show are just changes values to execute something else

18
00:01:57,680 --> 00:02:00,090
I just want a simple message so just typing

19
00:02:04,080 --> 00:02:04,590
loop

20
00:02:06,870 --> 00:02:07,830
executed

21
00:02:15,690 --> 00:02:20,800
sucks X fully.

22
00:02:21,510 --> 00:02:27,420
So this is a piece of code that will execute so it will display a message.

23
00:02:27,420 --> 00:02:30,930
So this is where I now specify the condition.

24
00:02:30,930 --> 00:02:32,180
So we a do loop.

25
00:02:32,190 --> 00:02:37,580
It doesn't evaluate it doesn't check the condition until the end here.

26
00:02:37,590 --> 00:02:42,730
So in that case this piece of code here would have executed at least once.

27
00:02:42,840 --> 00:02:44,340
So inside here.

28
00:02:44,340 --> 00:02:46,560
This is why I need to specify a while.

29
00:02:46,590 --> 00:02:49,990
Because it's a do while loop.

30
00:02:50,250 --> 00:02:55,450
So the expression no the condition is checked inside the wild part.

31
00:02:56,130 --> 00:03:09,510
So I'll typing while and then I'll say count which is a variable is less than 0 equals 2 for

32
00:03:14,260 --> 00:03:14,720
all right.

33
00:03:14,750 --> 00:03:23,460
So if I run this code as long as this condition is met this piece of code will continue to execute.

34
00:03:23,510 --> 00:03:31,970
So let me run that click Start and wait for the form to load.

35
00:03:32,150 --> 00:03:37,580
So watch as I click on the form on the button says.

36
00:03:37,580 --> 00:03:43,430
Loop executed successfully loop executed successfully.

37
00:03:43,460 --> 00:03:44,780
So you keep saying that

38
00:03:52,210 --> 00:03:54,350
our cat just jumped into the code.

39
00:03:54,380 --> 00:03:59,440
I missed something because I want the way I've set it up at the moment.

40
00:03:59,480 --> 00:04:06,200
The condition will always be true so I need to specify an increment.

41
00:04:06,200 --> 00:04:14,060
So the way you do that is I'm just going to get rid of this bit here.

42
00:04:16,280 --> 00:04:18,520
And time pain count

43
00:04:26,920 --> 00:04:36,570
plus plus what this plus plus means is that it will increase the value of the count by one.

44
00:04:36,570 --> 00:04:39,860
So eventually this condition will become force.

45
00:04:39,990 --> 00:04:48,020
The way I had the codes set up previously before I run the code it will always be true.

46
00:04:48,030 --> 00:04:50,840
In that case the loop will never end.

47
00:04:50,850 --> 00:04:54,720
So behold now become an infinite loop because the condition will always be true.

48
00:04:54,720 --> 00:04:55,130
Bye bye.

49
00:04:55,130 --> 00:04:57,440
Put an account to account here.

50
00:04:57,520 --> 00:04:58,500
I'm increasing.

51
00:04:58,500 --> 00:05:04,500
This is a variable I'm saying that each time the loop is executed increase the value by 1.

52
00:05:04,620 --> 00:05:11,540
So by increasing it each time you run it eventually it will exceed 4 and the condition would be force

53
00:05:12,720 --> 00:05:15,630
which makes the code stop executing.

54
00:05:16,110 --> 00:05:17,240
So let's start that again.

55
00:05:17,250 --> 00:05:23,520
Click Start and click on the button that's 1

56
00:05:26,520 --> 00:05:36,430
2 3 4.

57
00:05:37,370 --> 00:05:46,210
I have had to change the value of the variable here to 1 because I had it set 2 4.

58
00:05:46,490 --> 00:05:53,960
So what I meant was that the value or set to 4 and so the increment this counts here obviously did not

59
00:05:53,960 --> 00:05:59,430
make any difference because once the value was 4 here each time you increase it.

60
00:05:59,660 --> 00:06:02,180
It doesn't this condition will not be met.

61
00:06:02,780 --> 00:06:06,200
So as he continues to loop.

62
00:06:06,380 --> 00:06:13,490
So what I've done have changed the value to have changed the value of the variable called Count to 1.

63
00:06:13,550 --> 00:06:17,760
So each time we click on the button the count will increase.

64
00:06:17,790 --> 00:06:19,560
So you click on the button.

65
00:06:19,640 --> 00:06:24,550
This will be executed so it will now be one instance.

66
00:06:24,560 --> 00:06:27,650
You click on it again they'll be 2 3 4.

67
00:06:27,980 --> 00:06:33,500
So once you've clicked on it four times then that count would have increased to 4 and the code will

68
00:06:33,500 --> 00:06:35,090
stop executing.

69
00:06:35,180 --> 00:06:36,350
So let's give that a go.

70
00:06:36,350 --> 00:06:39,410
Sorry if I may have confused you with that.

71
00:06:39,460 --> 00:06:41,350
So let's run that again click start.

72
00:06:42,920 --> 00:06:45,320
Alright so watch out for this button.

73
00:06:45,460 --> 00:06:48,190
I will once I click on it once.

74
00:06:48,250 --> 00:06:55,280
The message should display and until I click the message four times we should include indicators account

75
00:06:55,280 --> 00:07:00,700
or for the message will not disappear until the count is over.

76
00:07:00,700 --> 00:07:03,320
So does the button click one.

77
00:07:03,430 --> 00:07:08,290
So this is a first loop count that is a first count.

78
00:07:08,290 --> 00:07:13,350
If I click okay there will be two click okay again they'll be three okay again.

79
00:07:13,360 --> 00:07:17,790
Now before I click okay again it then should disappear.

80
00:07:18,010 --> 00:07:18,390
All right.

81
00:07:18,400 --> 00:07:26,260
So that's the count so once the exceeds for as long as the count is equal to all not greater than 4

82
00:07:27,220 --> 00:07:29,190
it will continue to execute that code.

83
00:07:29,200 --> 00:07:33,130
But once he exceed that count it called to stop running.

84
00:07:33,130 --> 00:07:36,090
So as you can see it has stop running.

85
00:07:36,670 --> 00:07:42,640
This message has stopped showing up so this is a message that will keep showing up as long as this condition

86
00:07:42,640 --> 00:07:46,250
in the wild in the wild part of it is true.

87
00:07:46,360 --> 00:07:49,960
So that is it for this lecture in this lecture.

88
00:07:49,960 --> 00:07:58,510
We learnt about a do while loop so they say there's a difference between a while loop and a do while

89
00:07:58,510 --> 00:08:02,850
loop with the do while loop.

90
00:08:03,070 --> 00:08:10,840
The expression is evaluated at the end here while with a while loop it evaluates at the top.

91
00:08:10,900 --> 00:08:19,630
So what they do while the code is bound to run at least once before it evaluates the condition in the

92
00:08:19,630 --> 00:08:21,250
wild part of it.

93
00:08:21,250 --> 00:08:22,540
Thank you for watching.

94
00:08:22,540 --> 00:08:23,420
Bye for now.
