1
00:00:00,570 --> 00:00:01,640
Hello and welcome.

2
00:00:01,680 --> 00:00:11,750
In this lecture we are going to be writing some code for the Load event handler method.

3
00:00:11,760 --> 00:00:14,930
So switch to your design mode.

4
00:00:14,970 --> 00:00:21,030
Just click on the form design make sure you've got the form selected.

5
00:00:21,030 --> 00:00:25,930
You can tell by the name of the form and click on this here.

6
00:00:26,070 --> 00:00:30,600
This little thing that looks like a thunder lightning bolt.

7
00:00:30,600 --> 00:00:33,460
We need to scroll down to a point.

8
00:00:33,700 --> 00:00:41,270
Oh this is what we're looking for because what we're looking for this is the Load event right.

9
00:00:41,310 --> 00:00:43,210
So when the page loads.

10
00:00:43,230 --> 00:00:49,770
So with this is what we want to generate could force we just double click on it and it will create a

11
00:00:49,770 --> 00:00:51,290
stop a stop.

12
00:00:51,300 --> 00:00:53,130
Basically is an empty method.

13
00:00:53,190 --> 00:00:59,310
So this is an method is created is empty because we've not written the code that will go in between

14
00:00:59,310 --> 00:01:02,220
the curly braces.

15
00:01:02,910 --> 00:01:04,040
What I'm going to do.

16
00:01:04,050 --> 00:01:15,720
I am going to write the code added on and explain it to the highlighted code is what I have chosen added

17
00:01:15,720 --> 00:01:15,990
on.

18
00:01:16,560 --> 00:01:22,350
So I'm just going to explain it to make sure when you write your code make sure the curly braces match

19
00:01:22,350 --> 00:01:30,950
up if not reduced you to complain and it will not compile your code so you can see you know the.

20
00:01:30,990 --> 00:01:32,370
My curly braces.

21
00:01:32,460 --> 00:01:35,690
They all match up.

22
00:01:36,840 --> 00:01:40,690
So let's start with the first line of the code which is this one here.

23
00:01:41,560 --> 00:01:50,170
Basically any time you see square brackets know that that is referencing an array referring to an array.

24
00:01:50,190 --> 00:02:00,930
So what this line of code is basically this code is going to put a list of all the fine finally all

25
00:02:00,930 --> 00:02:08,010
the found names in the picks directly remember we created the directory for our images and call it picks.

26
00:02:08,010 --> 00:02:18,600
So it will put or put a list of all the file names in the picks directory to the images variable.

27
00:02:18,600 --> 00:02:19,340
OK.

28
00:02:19,410 --> 00:02:25,810
So this is a variable image is created a variable here called images.

29
00:02:26,010 --> 00:02:27,320
We've set it to this.

30
00:02:27,330 --> 00:02:28,540
So what it will do.

31
00:02:28,830 --> 00:02:35,520
It will get all the pictures all the images from this directory picks and dump it and store it inside

32
00:02:35,520 --> 00:02:36,970
this image.

33
00:02:37,080 --> 00:02:44,580
Images variable on line 41 here have introduced a for each a four which is a kind of loop.

34
00:02:44,580 --> 00:02:45,840
So it will loop true.

35
00:02:45,840 --> 00:02:57,750
Here is going to this image here which is the it will loop through that image and it will each time

36
00:02:57,750 --> 00:02:58,570
we loops through.

37
00:02:58,620 --> 00:03:03,900
It will create an instance of that image.

38
00:03:03,900 --> 00:03:09,980
So here is looking for each a string basically is a text a string of text.

39
00:03:10,050 --> 00:03:16,840
So it is looking for each text you know in the image is text in the image in images.

40
00:03:16,860 --> 00:03:19,530
This image is is this variable here.

41
00:03:19,530 --> 00:03:26,580
So that's what this string is looking for the text in the image in this image is variable.

42
00:03:27,030 --> 00:03:28,920
Line 4 2 3.

43
00:03:28,920 --> 00:03:34,020
This line here.

44
00:03:34,020 --> 00:03:45,840
What that highlighted line does it creates a new bit map picture and then adds it to the beachy images

45
00:03:46,080 --> 00:03:48,780
array.

46
00:03:49,310 --> 00:03:57,830
Remember we created an array earlier on in our previous lecture which is this peaky images array.

47
00:03:57,860 --> 00:04:00,710
All right.

48
00:04:00,710 --> 00:04:03,540
I've also introduced a for loop here.

49
00:04:03,560 --> 00:04:09,650
This line here is a for loop a for loop basically line inside the palace parentheses

50
00:04:12,140 --> 00:04:13,280
past it.

51
00:04:13,280 --> 00:04:21,200
There is a data type of integer which is a number a loop basically will go through each return item

52
00:04:21,500 --> 00:04:24,290
and count to what it is doing here.

53
00:04:24,290 --> 00:04:31,160
I've given it a variable of I and I have set the initial value to zero.

54
00:04:31,160 --> 00:04:33,050
So this is the value of the counter.

55
00:04:33,560 --> 00:04:35,720
So to start counting from zero.

56
00:04:36,140 --> 00:04:38,860
And here I'm calling the same variable here.

57
00:04:38,870 --> 00:04:50,780
I'm saying as long as this variable if it's less than 50 I wanted to keep increasing by 1 plus plus

58
00:04:50,780 --> 00:04:54,230
men increased by wants me to keep increasing the variable.

59
00:04:54,230 --> 00:05:02,690
So what that will do it will look in the directory for the images and it will check as long as the images

60
00:05:03,560 --> 00:05:04,820
are less than 50.

61
00:05:04,820 --> 00:05:09,690
It will keep adding adding images to the screen until it reaches 50.

62
00:05:09,710 --> 00:05:16,490
So this value you can experiment with and see you know what gets displayed on the screen later but basically

63
00:05:16,490 --> 00:05:17,470
that's what this county.

64
00:05:17,480 --> 00:05:29,350
It will stop when the images are above 50 here on line 48.

65
00:05:29,480 --> 00:05:34,950
So this is a class and this is a local variable.

66
00:05:35,240 --> 00:05:42,710
And I've set a new instance of that local variable and you say this is a method is going to equals to

67
00:05:42,710 --> 00:05:58,170
this Brit pick method here on line 49 I've got this local variable here MP and set it to this the percent

68
00:05:58,680 --> 00:06:01,390
actually means remainder.

69
00:06:02,130 --> 00:06:12,480
So 5 percent of 2 is 1 because you can divide 5 into 2 twice with a reminder of 1

70
00:06:15,210 --> 00:06:17,420
on line 50 here.

71
00:06:17,870 --> 00:06:20,140
The one highlighted.

72
00:06:20,150 --> 00:06:23,730
Basically what the line that code was going to do.

73
00:06:23,750 --> 00:06:33,910
He's going to get the next available random number between zero and the windows with the one next to

74
00:06:33,910 --> 00:06:44,510
it will do the same next available number and the windows height Oh don't worry about this line here.

75
00:06:44,530 --> 00:06:47,190
I've commented out so it doesn't matter anyway.

76
00:06:47,440 --> 00:06:49,390
Just get rid of it so it doesn't confuse you.

77
00:06:49,390 --> 00:06:57,280
I was just trying to test some things out so I get rid of that on here we are we've got a method here

78
00:06:57,820 --> 00:07:01,680
that adds an object to the end of the list.

79
00:07:01,780 --> 00:07:02,130
All right.

80
00:07:02,140 --> 00:07:05,860
So use this method if you want to append a list to is good.

81
00:07:06,050 --> 00:07:12,900
If I wanted to add this here will add an object to the end of this variable.

82
00:07:12,900 --> 00:07:14,560
Here is brick picks.

83
00:07:14,560 --> 00:07:22,510
Class variable so any way you're using add you are appending or adding to a list.

84
00:07:22,510 --> 00:07:24,170
So this is an array.

85
00:07:24,340 --> 00:07:30,480
So by adding the add here it will add an object to the end of that list.

86
00:07:30,700 --> 00:07:33,180
So that is it for this lecture.

87
00:07:33,180 --> 00:07:40,150
I'm gonna stop this lecture here and we will progress in the next lecture.

88
00:07:40,390 --> 00:07:41,980
Thank you so much for watching.

89
00:07:41,980 --> 00:07:42,970
Take care.

90
00:07:42,970 --> 00:07:43,660
Bye for now.
