1
00:00:00,750 --> 00:00:01,800
Hello and welcome.

2
00:00:01,830 --> 00:00:08,660
In this lecture we are going to create the method for the equals two button.

3
00:00:09,090 --> 00:00:20,980
So it will capture all the events that happen when the equal to button is clicked so less create these

4
00:00:20,990 --> 00:00:23,580
color code to do that.

5
00:00:23,580 --> 00:00:29,140
You click on the equals two button.

6
00:00:29,460 --> 00:00:37,690
And here in the properties click on that and where you've got the click event just double click.

7
00:00:37,830 --> 00:00:41,820
And it should open up the skeletal code.

8
00:00:41,820 --> 00:00:43,770
So this is the method.

9
00:00:43,860 --> 00:00:53,100
And in between these parentheses here is where we will write our code that will respond to the equals

10
00:00:53,130 --> 00:01:08,100
two button when it is clicked because the equals two button will be used in combination with the operators.

11
00:01:08,100 --> 00:01:17,610
We are going to use what is called a switch statement the switch statement basically is used to perform

12
00:01:17,610 --> 00:01:23,180
different actions based on different conditions.

13
00:01:23,190 --> 00:01:23,610
All right.

14
00:01:23,610 --> 00:01:33,090
So what happens is that when you use a switch statement you select a block of code to be executed based

15
00:01:33,240 --> 00:01:35,910
on certain conditions.

16
00:01:35,910 --> 00:01:43,470
The best way to illustrate this that I'm going to just write a piece of code and I will run through

17
00:01:43,470 --> 00:01:44,070
it with you.

18
00:01:45,980 --> 00:01:46,410
All right.

19
00:01:46,530 --> 00:01:51,920
I have added a chunk of code here this code highlighted here.

20
00:01:52,590 --> 00:01:57,790
And this is basically what is known as a switch statement.

21
00:01:58,170 --> 00:02:05,170
So a switch statement is used to perform different actions based on different condition.

22
00:02:05,190 --> 00:02:12,750
So here when you are writing a switch statement you begin with the word switch and then in inside the

23
00:02:12,750 --> 00:02:21,790
parentheses you have to pass in an expression that will be evaluated once.

24
00:02:21,870 --> 00:02:22,560
All right.

25
00:02:22,560 --> 00:02:29,070
So this what have passed in here is a variable that was created here.

26
00:02:29,070 --> 00:02:32,670
This string here called operate all clicked.

27
00:02:32,670 --> 00:02:41,760
So that is a variable that is the expression this switch is is going to express is going to see what

28
00:02:41,760 --> 00:02:49,380
happens a wrong the code goes true once and it checks this to check which of the operators have been

29
00:02:49,380 --> 00:02:50,300
clicked.

30
00:02:50,310 --> 00:02:54,840
So each of the operators are represented as cases.

31
00:02:54,840 --> 00:03:03,030
So this is case one if for example someone clicks on the does a mathematical addition.

32
00:03:03,300 --> 00:03:08,630
And after that they click on the equals to sign this.

33
00:03:08,760 --> 00:03:17,550
It will references operator or clicked variable and the case will be plus for example with the operator

34
00:03:17,550 --> 00:03:23,040
on perform is a plus it will execute this code.

35
00:03:23,040 --> 00:03:34,590
This result box dot text is the variable is the result box where the answers are displayed for the calculate

36
00:03:35,760 --> 00:03:45,060
and we'll set that to equals to the resulting value variable plus this double here we used in the past

37
00:03:45,090 --> 00:03:53,100
to convert the text from the result box into a value that it understands.

38
00:03:53,610 --> 00:03:54,770
And then we are now.

39
00:03:54,870 --> 00:04:03,030
Then we convert and after that's been converted we then converted into a string using the two string

40
00:04:03,030 --> 00:04:04,100
method.

41
00:04:04,110 --> 00:04:06,270
So this is case 1.

42
00:04:06,270 --> 00:04:16,050
So if the operator that is click is a plus it will execute this code once he's finished doing that.

43
00:04:16,050 --> 00:04:17,250
It will break.

44
00:04:17,250 --> 00:04:22,500
That means the code will be terminated and then it looks for the second case.

45
00:04:22,500 --> 00:04:28,290
If another operator is performed if it's a minus.

46
00:04:28,320 --> 00:04:30,590
It will execute this piece of code here.

47
00:04:30,600 --> 00:04:32,550
Identical to the first one.

48
00:04:32,580 --> 00:04:37,900
Once it's done that it doesn't hang about it breaks out of the code.

49
00:04:38,190 --> 00:04:41,570
Again the next one is a multiplication.

50
00:04:41,570 --> 00:04:47,020
If each of these block code blocks are represented by as a case.

51
00:04:47,070 --> 00:04:49,890
So this is a first case second case third case.

52
00:04:50,310 --> 00:04:57,330
So if the operator clicked if it's a division if it's on a division operator it to execute this piece

53
00:04:57,330 --> 00:04:59,040
of code here.

54
00:04:59,270 --> 00:04:59,830
Okay.

55
00:04:59,850 --> 00:05:06,700
And then with a switch statement you sometimes have what is called a default.

56
00:05:06,930 --> 00:05:14,700
The default keyword basically specifies the code that will run if there is no case match.

57
00:05:15,110 --> 00:05:15,500
OK.

58
00:05:15,510 --> 00:05:22,770
So if none of the scenes here matches the expression you have to specify default which would be the

59
00:05:22,770 --> 00:05:30,630
code that will run the default case does not have to be it doesn't have to be the last case here.

60
00:05:30,630 --> 00:05:34,470
You could place it anyway in the block OK.

61
00:05:34,500 --> 00:05:41,330
However if the default is not the last case in the switch block you must.

62
00:05:41,400 --> 00:05:48,320
And the default case with a break although I've done that here is not really necessary.

63
00:05:48,330 --> 00:05:56,060
But if for example the default was somewhere in the middle you'd have to end it with a break once again

64
00:05:56,180 --> 00:05:59,440
our run through the switch statement with you.

65
00:05:59,780 --> 00:06:04,550
So the way the switch works is that this switch looks for an expression.

66
00:06:04,580 --> 00:06:08,850
In this case the expression is this variable here.

67
00:06:09,110 --> 00:06:19,010
It will evaluate that expression once the value of the expression is thin compared with the values of

68
00:06:19,190 --> 00:06:25,010
each of the cases for example plus minus two times more division.

69
00:06:25,070 --> 00:06:35,730
It would compare that to each of the values in the cases and if there is a match the associated block

70
00:06:35,730 --> 00:06:37,820
of code is executed.

71
00:06:37,830 --> 00:06:44,370
If you find the matching goes through the cases if there is a match it will stop and execute that course

72
00:06:44,460 --> 00:06:54,100
code piece of code once a match is found it it hits the break and the the code stops the execution of

73
00:06:54,100 --> 00:06:58,750
the code will stop when a match is found and the job is done.

74
00:06:58,900 --> 00:07:05,320
The break stops and there will be no more evaluation of the code block.

75
00:07:05,710 --> 00:07:12,520
Note that is not always necessary to put a brake in the last case.

76
00:07:12,520 --> 00:07:18,880
For example if you have the last case in the switch block you don't necessarily have to put a brake

77
00:07:18,900 --> 00:07:22,150
is just good practice.

78
00:07:22,150 --> 00:07:32,520
In this lecture we wrote the code for the equals two button is in the switch statement.

79
00:07:33,070 --> 00:07:39,880
So there's still a bit more to do so we'll continue in the next lecture where we will try and tie up

80
00:07:40,570 --> 00:07:45,970
the rest of the code that will make the calculator all active.

81
00:07:46,000 --> 00:07:52,900
The purpose of this lecture was just to write the piece of code for the equals two button which we have

82
00:07:52,900 --> 00:07:55,540
done using this switch statement.

83
00:07:55,540 --> 00:07:56,860
Thanks so much for watching.

84
00:07:56,860 --> 00:07:57,550
Take care.

85
00:07:57,550 --> 00:07:58,150
Bye for now.
