1
00:00:00,920 --> 00:00:07,440
You guys are continuing the development of our current wind farms application and we're know at this

2
00:00:07,440 --> 00:00:13,290
stage what we want to actually start collecting the information from the farm upon submit.

3
00:00:13,290 --> 00:00:20,250
No I want to use this about a minute to explain a very important concept that can save you a lot of

4
00:00:20,250 --> 00:00:22,050
time in your development activity.

5
00:00:22,070 --> 00:00:29,490
And this is renaming your controls so when we're designing this farm we went to the tool box to drug

6
00:00:29,490 --> 00:00:35,580
law that controls and replace them where we wanted we change a few properties one property we did not

7
00:00:35,730 --> 00:00:37,620
change was the name.

8
00:00:37,620 --> 00:00:44,040
So if we click on the text box we would see that it has a name property and every control that you're

9
00:00:44,040 --> 00:00:50,650
going to click on has a name property and the name here is text box one no by default.

10
00:00:50,670 --> 00:00:52,220
It's going to always be counting.

11
00:00:52,230 --> 00:00:56,370
So if this is the first x box it's going to be a text box on the second text box is going to be text

12
00:00:56,370 --> 00:00:59,330
box to the third fourth et cetera et cetera.

13
00:00:59,400 --> 00:01:05,880
That is not ideal when you have a few text boxes because you want to know which text box exactly has

14
00:01:05,880 --> 00:01:06,790
the customer name.

15
00:01:06,790 --> 00:01:12,540
So by leaving them as the default name text box on Text Box 2 et cetera every time you're going to want

16
00:01:12,540 --> 00:01:16,650
to know the information you're going to have to come back over click on the text box look at the name

17
00:01:16,650 --> 00:01:17,290
and say Oh yeah.

18
00:01:17,300 --> 00:01:18,200
That's the one I want.

19
00:01:18,210 --> 00:01:23,880
So I'm going to give you a little technique that's his best practice actually that will help you to

20
00:01:23,880 --> 00:01:31,770
reduce the amount of investigation and you know time you spend trying to find the control you want and

21
00:01:31,770 --> 00:01:33,780
that is simply to change the name.

22
00:01:33,780 --> 00:01:42,180
So I have a simple convention where I use that prefix to take to determine or to the peak rather the

23
00:01:42,180 --> 00:01:49,290
type of control that is being referenced and then I give it a name that is akin to the information that

24
00:01:49,290 --> 00:01:50,280
it's supposed to have.

25
00:01:50,280 --> 00:01:54,090
So let's do the text box so I have the text box here.

26
00:01:54,120 --> 00:01:56,110
That's his gloating customer name.

27
00:01:56,130 --> 00:02:03,180
So my ideal name for this is not Text Box 1 but it would be something like TB which is short for text

28
00:02:03,180 --> 00:02:09,200
box or you could say a t t whatever it is but some prefix that says this is a takes the box.

29
00:02:09,210 --> 00:02:09,570
Right.

30
00:02:09,960 --> 00:02:12,570
So I'm saying TB customer

31
00:02:14,680 --> 00:02:19,450
customer me can't know that this is me naming the objects.

32
00:02:19,450 --> 00:02:21,820
So remember I said that each control is an object.

33
00:02:22,030 --> 00:02:24,890
So by saying TB customer name I not take Suboxone.

34
00:02:24,900 --> 00:02:28,420
This object is no called TB customer name.

35
00:02:28,420 --> 00:02:33,090
The same rules that apply to deeming a variable apply here.

36
00:02:33,090 --> 00:02:39,400
No spaces no special characters all set of the underscore just the simpler the better.

37
00:02:39,400 --> 00:02:39,800
All right.

38
00:02:39,830 --> 00:02:44,510
So no need to have in a long complicated need with 50 characters.

39
00:02:44,560 --> 00:02:47,020
Somebody asked me one time if there was a character limit.

40
00:02:47,020 --> 00:02:52,840
I said there is none but I'm not entirely sure why what he had in mind for a name.

41
00:02:53,080 --> 00:02:54,820
But you know the simpler the better.

42
00:02:54,820 --> 00:03:01,010
So TB cluster My name is saying that this is a text box simple that should be holding the customer name.

43
00:03:01,120 --> 00:03:06,880
And I'm going to repeat that for every other control because then I want to be able to reference them

44
00:03:06,940 --> 00:03:08,370
easily from code.

45
00:03:08,440 --> 00:03:13,950
But let's just start with the TB customer name and then I want to be.

46
00:03:13,990 --> 00:03:20,920
I want that when the person click submit I want to print the contents of the customer need takes box

47
00:03:21,040 --> 00:03:23,800
in another window someone to acknowledge that.

48
00:03:23,830 --> 00:03:24,770
Okay.

49
00:03:24,880 --> 00:03:27,890
CAR has been rented to that person.

50
00:03:28,450 --> 00:03:35,270
So that means my clique needs to work my Submit button needs to do something when it is clicked.

51
00:03:35,290 --> 00:03:40,510
So I would stop Campbell being very deliberate when creating your events and I'm going to show you exactly

52
00:03:40,510 --> 00:03:41,250
what I meant.

53
00:03:41,620 --> 00:03:42,120
So we could.

54
00:03:42,120 --> 00:03:49,360
Car button we go to properties and then you notice that in our proper discipline we have this paper

55
00:03:49,360 --> 00:03:55,600
with our wrench on top it may look you know shady on my display but it may look better on yours but

56
00:03:55,600 --> 00:04:02,020
that paper with that wrench that's the properties we know are the properties section of the pin and

57
00:04:02,020 --> 00:04:05,740
then we have this lightning bolts and if we hover we see events.

58
00:04:05,740 --> 00:04:11,890
So when we hover over our lightning bolts we see the menu switch and then we have a bunch of options

59
00:04:11,890 --> 00:04:13,090
for events.

60
00:04:13,210 --> 00:04:17,020
And once again an event is like our reaction to an action.

61
00:04:17,050 --> 00:04:17,310
Right.

62
00:04:17,320 --> 00:04:19,710
So a click is an action.

63
00:04:19,720 --> 00:04:23,060
What do you want to do when I am clicked.

64
00:04:23,140 --> 00:04:24,790
That is basically what an event is.

65
00:04:24,790 --> 00:04:30,990
So I have the button and I want to determine that something should happen when said button is clicked

66
00:04:31,330 --> 00:04:35,900
so far that I need a method stub so I can click this.

67
00:04:36,000 --> 00:04:41,490
Make sure I am click and then double click in this look editable looking area.

68
00:04:41,510 --> 00:04:46,500
And when I do that it generates that method stub just like it did with the label when we double clicked

69
00:04:46,510 --> 00:04:48,120
it's in our previous video.

70
00:04:48,160 --> 00:04:48,550
All right.

71
00:04:48,760 --> 00:04:50,580
But once again I was very deliberate.

72
00:04:50,590 --> 00:04:52,240
I knew exactly what I was doing.

73
00:04:52,240 --> 00:04:57,610
So long story short the shortest way to make I click event for a button for sure is that just a little

74
00:04:57,610 --> 00:05:00,640
click it then it will generate that event no problem.

75
00:05:00,640 --> 00:05:04,090
But I want you to be very deliberate when you're doing that.

76
00:05:04,090 --> 00:05:05,780
So you know exactly what you're doing.

77
00:05:05,800 --> 00:05:10,060
You're not making any mistakes along the way or reducing the mistakes you make along the way.

78
00:05:10,630 --> 00:05:16,480
So we wanted to click event so no it brings us over to the code file or the code behind.

79
00:05:16,690 --> 00:05:20,520
And then this is take a look at what this click event looks like.

80
00:05:20,610 --> 00:05:25,690
It's a private void and then it has the name off the button but no one on the score click.

81
00:05:25,750 --> 00:05:26,050
Right.

82
00:05:26,080 --> 00:05:30,450
So that's another reason you want to rename your controls because you fired six buttons.

83
00:05:30,520 --> 00:05:34,940
I wouldn't want but one underscore a click button to underscore a click instead.

84
00:05:34,990 --> 00:05:42,190
If I call that this button submit and then I said and then I generate the Click event sorry.

85
00:05:42,220 --> 00:05:46,240
So if I had renamed it's in the properties which I didn't and I won't.

86
00:05:46,240 --> 00:05:47,750
Since we're this far ahead.

87
00:05:47,770 --> 00:05:55,180
I'm just explaining the concept you had I changed the name to submit or something like Beatty and submit.

88
00:05:55,190 --> 00:05:55,700
Right.

89
00:05:55,750 --> 00:06:01,380
And then generated the events then I would have gotten Beatty and submit on the score click.

90
00:06:01,480 --> 00:06:04,750
So whatever the name of the control is on the score.

91
00:06:04,750 --> 00:06:05,980
The type of events.

92
00:06:05,980 --> 00:06:10,890
That's the naming convention that will always be used when generating these method stops.

93
00:06:10,900 --> 00:06:11,740
All right.

94
00:06:11,740 --> 00:06:19,420
And then the it is taking to two parameters object sender and event args e I'm not going to get into

95
00:06:19,420 --> 00:06:23,180
what those mean at least not yet as you go along you see their purpose.

96
00:06:23,220 --> 00:06:27,430
But right now what I want to do is display some form of message to see.

97
00:06:27,430 --> 00:06:29,650
Thank you for submitting your information.

98
00:06:29,680 --> 00:06:41,390
So I have a simple message box in C sharp so I can see a message box dot it is a method called Sure.

99
00:06:41,560 --> 00:06:45,160
So if you're familiar with the console or right line it's very similar.

100
00:06:45,160 --> 00:06:45,720
Console.

101
00:06:45,750 --> 00:06:45,940
Right.

102
00:06:45,970 --> 00:06:52,930
Land rights to the console message box that show shows a message box with a message in it and that message

103
00:06:52,930 --> 00:06:54,500
has to be a string.

104
00:06:54,580 --> 00:06:54,880
Right.

105
00:06:54,880 --> 00:06:57,370
So what is the message you want to display.

106
00:06:57,370 --> 00:06:58,420
You just see.

107
00:06:58,420 --> 00:07:01,460
Thank you for branding.

108
00:07:01,530 --> 00:07:01,810
All right.

109
00:07:01,810 --> 00:07:03,360
So let's just leave it at that.

110
00:07:03,370 --> 00:07:04,910
Thank you for anything for now.

111
00:07:04,950 --> 00:07:08,710
Let's just see how these methods work or this clicking event.

112
00:07:08,740 --> 00:07:11,590
So when I click Start All right.

113
00:07:11,600 --> 00:07:13,690
And then I fill out my form.

114
00:07:13,760 --> 00:07:17,340
So I'm just put a random date US type of car.

115
00:07:17,480 --> 00:07:20,830
It's oriented on the first then it's going back Monday.

116
00:07:20,930 --> 00:07:22,520
And then I click submit.

117
00:07:22,610 --> 00:07:24,370
Then you will see the message box.

118
00:07:24,380 --> 00:07:25,770
Thank you for anything.

119
00:07:25,760 --> 00:07:26,090
All right.

120
00:07:26,090 --> 00:07:29,820
So that's what happened when I clicked then he'd call the phone son.

121
00:07:29,870 --> 00:07:36,080
So that's the event because the phone son is there but notice it didn't fire until the click happened.

122
00:07:36,080 --> 00:07:40,700
All right so that's the core feature of events driven programming.

123
00:07:40,700 --> 00:07:44,220
So no I can inject that takes coming from the textbook.

124
00:07:44,240 --> 00:07:49,080
So I'm going to use interpolation and do a little concatenation here.

125
00:07:49,130 --> 00:07:55,610
So I'm going to put a dollar sign before the string and then inside the string I'm just going to inject.

126
00:07:55,970 --> 00:07:58,520
I want the text from the text box.

127
00:07:58,520 --> 00:08:05,520
What's the name of the text box remember that we renamed the text box to be TV customer names.

128
00:08:05,530 --> 00:08:11,270
So when I want to make reference to that control I just need to make reference the name of the control

129
00:08:11,510 --> 00:08:13,490
TV that customer need.

130
00:08:13,760 --> 00:08:19,430
They'll be that close to my name if I hover over it you see that it is a text box that's it's a class

131
00:08:19,430 --> 00:08:20,400
type.

132
00:08:20,400 --> 00:08:20,880
Right.

133
00:08:20,960 --> 00:08:25,820
But in a room with that these are objects of type whatever control they are.

134
00:08:25,850 --> 00:08:33,680
So this is an object of type text box and it has all of these properties the property that gives me

135
00:08:33,680 --> 00:08:39,040
the data that was entered into the text box would be text.

136
00:08:39,050 --> 00:08:39,320
All right.

137
00:08:39,320 --> 00:08:40,860
So there is that takes property.

138
00:08:40,880 --> 00:08:47,080
It's we didn't fill it all it's because well you don't want takes the B instead of your textbooks at

139
00:08:47,090 --> 00:08:47,910
the start.

140
00:08:47,990 --> 00:08:51,450
But then once I do use I have enter text into the text box.

141
00:08:51,530 --> 00:08:52,880
Then you want to text from it.

142
00:08:52,910 --> 00:08:54,620
So we need to see.

143
00:08:54,610 --> 00:08:57,050
We want to be customer name.

144
00:08:57,050 --> 00:08:58,620
That's our text box control.

145
00:08:58,800 --> 00:09:01,380
Dot the property text.

146
00:09:01,430 --> 00:09:07,160
So this will give us the text that was entered into the text box during runtime.

147
00:09:07,160 --> 00:09:08,360
So let's try that again.

148
00:09:08,360 --> 00:09:25,300
So I want to click start and then I'm going to see B Gil Walters and The Abigail Walter Walters spelling

149
00:09:25,600 --> 00:09:26,050
sorry.

150
00:09:26,410 --> 00:09:26,650
All right.

151
00:09:26,650 --> 00:09:31,510
Abigail Walter Walters and then I click submit and then there we go.

152
00:09:31,510 --> 00:09:35,540
So we have the message box showing thank you.

153
00:09:35,590 --> 00:09:37,070
Thank you printing.

154
00:09:37,090 --> 00:09:38,850
Thank you for pointing.

155
00:09:38,860 --> 00:09:39,230
All right.

156
00:09:39,230 --> 00:09:41,990
So I can just modify all of that anyway.

157
00:09:42,030 --> 00:09:44,750
So thank you for printing such poor English.

158
00:09:44,750 --> 00:09:46,590
I apologize.

159
00:09:46,660 --> 00:09:53,860
Then I can just say call on and the customer name that was entered into the text box art.

160
00:09:54,250 --> 00:09:55,180
So that is it.

161
00:09:55,180 --> 00:09:59,790
So I'm going to put our break point on this line just so we can see exactly what's happening.

162
00:09:59,800 --> 00:10:00,830
So when I click.

163
00:10:00,830 --> 00:10:02,950
Line for me line 20.

164
00:10:02,950 --> 00:10:04,150
Might be a different line for you.

165
00:10:04,240 --> 00:10:10,810
I the name off the method or the line that the method definition starts on kicking in.

166
00:10:10,810 --> 00:10:20,440
This isn't creepy in between the leftmost being and the line the code line numbers and then that little

167
00:10:20,440 --> 00:10:21,550
red dots will appear.

168
00:10:21,580 --> 00:10:25,840
So that's a debug or a breakpoint rather and then I click Start.

169
00:10:26,170 --> 00:10:30,970
So what happens is that this breakpoint is going to get hit under certain circumstances.

170
00:10:30,970 --> 00:10:36,070
So for as long as the program is running the breakpoint isn't being kids who are doing all of these

171
00:10:36,070 --> 00:10:40,120
things the very point isn't being hit until we hit submit and then we see that.

172
00:10:40,120 --> 00:10:40,540
Okay.

173
00:10:40,540 --> 00:10:42,610
That is where it really calls a function.

174
00:10:42,610 --> 00:10:44,950
It pauses in execution.

175
00:10:44,950 --> 00:10:49,470
So once you see that yellow arrow it's pointing to the line that it's no at.

176
00:10:49,780 --> 00:10:55,630
And if we sit down and take some time to assess what's going on here when we're in debug mode we can

177
00:10:55,630 --> 00:10:58,000
actually see what's inside our variables.

178
00:10:58,000 --> 00:11:04,870
So if we hover over a center you'll see that sender is telling us that it was some submit some some

179
00:11:05,020 --> 00:11:10,870
subnets are some control with the text submit sent the call to this event.

180
00:11:10,870 --> 00:11:11,200
Right.

181
00:11:11,450 --> 00:11:13,960
And if you look in the e you see some other stuff.

182
00:11:13,960 --> 00:11:19,930
Once again I'm not going to get too much into what all of those mean but the fact is that visual studio

183
00:11:19,930 --> 00:11:25,920
allows us to pause our code in execution you know go line by line and see something.

184
00:11:25,920 --> 00:11:28,330
So in here you're running into program.

185
00:11:28,620 --> 00:11:33,160
You know that logic arrows or something like that I just want to see exactly where your mistake was.

186
00:11:33,160 --> 00:11:38,590
You can use these breakpoints again a pause and step through I won't go through the step through just

187
00:11:38,590 --> 00:11:43,810
yet but I'm just going to remove the breakpoint so just by clicking back where the red circle was that

188
00:11:43,810 --> 00:11:45,190
turns its on and off.

189
00:11:45,370 --> 00:11:51,430
And then I can just click continue and then it will continue with the execution and then it says thank

190
00:11:51,430 --> 00:11:57,950
you for pointing and whatever and then text was entered into user into the customer name.

191
00:11:58,240 --> 00:12:03,940
So following that principle I want you to stop this video or right.

192
00:12:03,940 --> 00:12:04,600
No.

193
00:12:04,720 --> 00:12:13,810
And then go ahead and rename the controls and then try and produce a message box that print so the contents

194
00:12:13,840 --> 00:12:22,780
of each of these controls and so you would have something like order newer into customer name is this

195
00:12:22,840 --> 00:12:27,520
the date or intent is that the date returned is that and the type of car and that is that.

196
00:12:27,700 --> 00:12:30,700
And that's what I expect to see in your message box.

197
00:12:30,760 --> 00:12:30,970
All right.

198
00:12:31,000 --> 00:12:36,430
So I hope you at least pause the video and attempted what I'm going to walk you through changes that

199
00:12:36,430 --> 00:12:46,230
I just made so I continued and I renamed my controls so I changed my date picker daytime picker to DTA

200
00:12:46,300 --> 00:12:51,910
rented I call so that data and did I choose the DTA entered the 1 4 date returned.

201
00:12:51,910 --> 00:12:53,560
I said DTA returned.

202
00:12:53,560 --> 00:12:58,210
So if you didn't do it and you want to follow along just you know you can follow along just pause as

203
00:12:58,210 --> 00:13:05,350
you need to go along for the combo box I changed it to CB type of car.

204
00:13:05,380 --> 00:13:09,610
So once again I have the prefix for the type of the control and then the name.

205
00:13:10,180 --> 00:13:18,310
So CB full combo box D for daytime TV for a box I mean it's up to you I'm not telling you to use those

206
00:13:18,310 --> 00:13:25,120
prefixes exactly you can choose your own just a humble suggestion that will help you along the way.

207
00:13:25,120 --> 00:13:25,720
All right.

208
00:13:25,750 --> 00:13:32,200
And then I modified my submit button so let's look at some of the code I wrote in the submit and you'll

209
00:13:32,200 --> 00:13:36,930
see some very different code and I'm going to walk you through exactly what's happening here.

210
00:13:37,030 --> 00:13:50,740
So I like that I am able to generate variable and then store the value from the control inside the variable

211
00:13:50,910 --> 00:13:56,800
know that vantage for that for me is that when I have it in a variable I can do anything I want.

212
00:13:56,830 --> 00:14:02,170
So it's easier to manipulate when I puts it in a variable than to be writing if I needed to write the

213
00:14:02,170 --> 00:14:07,150
text five more times after it has been entered in into the text box.

214
00:14:07,180 --> 00:14:11,860
I don't want to be seeing TV that takes TV customer name that takes every time.

215
00:14:11,890 --> 00:14:18,130
So if I put in a nice convenient variable I can use this variable along the way and do any other computation

216
00:14:18,130 --> 00:14:18,580
I want.

217
00:14:18,610 --> 00:14:24,470
So my humble suggestion is that for each control that you're going to be taking data from.

218
00:14:24,520 --> 00:14:30,820
You have a corresponding variable to accept it and then you can manipulate the data through the variable

219
00:14:30,850 --> 00:14:32,020
as you wish.

220
00:14:32,020 --> 00:14:32,460
All right.

221
00:14:32,560 --> 00:14:40,000
So I have string UserName collecting the text for the user name text box I have string dates all it

222
00:14:40,030 --> 00:14:46,340
and then look at what I'm doing here and also the the date time picker is going to be bringing back

223
00:14:46,350 --> 00:14:55,060
the value of type of date time but I intend to print a string to screen so I can't put the time on into

224
00:14:55,060 --> 00:15:02,230
the string just as easily so I have to do all type conversion where I just see the string so I'm getting

225
00:15:02,410 --> 00:15:07,670
the value which would have been whatever is set inside of the text box or the date time speaker.

226
00:15:07,810 --> 00:15:12,410
That's the date and then I'm just seeing Give me the date as a string.

227
00:15:12,410 --> 00:15:13,740
Now there is much more we can do.

228
00:15:13,750 --> 00:15:15,710
What I'm going to keep it simple right.

229
00:15:15,710 --> 00:15:25,150
No I do the same for beats in string date in and then I say D2 returned value and then I say to string

230
00:15:25,150 --> 00:15:35,400
some converting these two data values into strings so that I can print them knowing the fourth line.

231
00:15:35,440 --> 00:15:40,360
I have a different variable type that we have never looked at or at I haven't looked at with you.

232
00:15:40,360 --> 00:15:42,790
And that is called var.

233
00:15:42,790 --> 00:15:44,620
No this is not really a data type.

234
00:15:44,620 --> 00:15:46,580
This is not a data type a tall.

235
00:15:46,810 --> 00:15:56,350
Var is like it is just like an agnostic declaration that we can use on a variable and then this variable

236
00:15:56,410 --> 00:15:59,860
will be relative to whatever is being assigned to it.

237
00:15:59,890 --> 00:16:01,860
So let me just make some space between them.

238
00:16:01,870 --> 00:16:05,600
So notice for every other one I said this is supposed to be a string.

239
00:16:05,620 --> 00:16:07,050
So we know it's a string.

240
00:16:07,090 --> 00:16:09,640
As we look at it we know that these are strings.

241
00:16:09,640 --> 00:16:15,760
When I say var I am seeing var because I am not sure what kind of value would be put into it.

242
00:16:15,850 --> 00:16:24,850
So I can declare a variable as var and then if I signed the number one to this then car type becomes

243
00:16:24,850 --> 00:16:25,540
an integer.

244
00:16:25,540 --> 00:16:26,580
See there.

245
00:16:26,710 --> 00:16:30,500
So I said var but then I said car type is equal to 1.

246
00:16:30,520 --> 00:16:36,010
It is not an integer so it knows that one is an integer so the variable are the the the variable type

247
00:16:36,010 --> 00:16:41,830
is not an integer if I say at one point one which you noisy that Dobler floats and I hover No it's a

248
00:16:41,830 --> 00:16:42,290
double.

249
00:16:42,490 --> 00:16:47,480
So if I send a string then car type is not a string.

250
00:16:47,480 --> 00:16:52,160
All right so the point is that VAR is a very very very very I like.

251
00:16:52,230 --> 00:16:58,530
I actually love using virus so much that it took me a while to remember that I can write the word string

252
00:16:58,560 --> 00:17:05,790
so VAR is very very convenient very flexible you can use it if you wish you will cut down the time of

253
00:17:05,790 --> 00:17:11,650
trying to figure out what data type your variables are your object needs to begin to see var give you

254
00:17:11,650 --> 00:17:16,350
10 name equals and whatever you assign to it it just knows that that is the data type it's working with

255
00:17:16,350 --> 00:17:17,450
that that moment right.

256
00:17:17,910 --> 00:17:19,500
So that's very convenient.

257
00:17:19,500 --> 00:17:23,200
So I just use this opportunity to introduce that to.

258
00:17:23,310 --> 00:17:31,950
So I said var car type is equal to the combo box which I call the CB type of car dot selected item because

259
00:17:31,950 --> 00:17:36,060
I want that when you select the one from the droplets that's the one I'm interested in getting back

260
00:17:36,390 --> 00:17:41,500
and then I have to do a two string because selected item is a type of object.

261
00:17:41,670 --> 00:17:49,140
So then I have to see convert that to string and then it gives me the string value of whatever was selected

262
00:17:49,500 --> 00:17:54,840
and then with all of that done I can no say message box.

263
00:17:54,840 --> 00:17:57,700
So this is the ultimate objective message box.

264
00:17:57,700 --> 00:17:59,090
Sure.

265
00:17:59,100 --> 00:18:08,370
And what I'm going to be showing is I just use my interpolation and read my nice paragraph someone to

266
00:18:08,370 --> 00:18:12,600
say something like customer name.

267
00:18:12,750 --> 00:18:13,540
Hold on.

268
00:18:13,600 --> 00:18:17,920
And then instead of having to write TV custom one named Tex.

269
00:18:17,930 --> 00:18:25,440
I can just see customer name because I stored the value from the text box inside of this variable.

270
00:18:25,590 --> 00:18:26,050
All right.

271
00:18:26,410 --> 00:18:30,580
And then I can do a line break here.

272
00:18:30,580 --> 00:18:34,090
So what I want is each value in its own line.

273
00:18:34,090 --> 00:18:40,890
So to do that in C sharp in a string have to do something like that and box.

274
00:18:41,010 --> 00:18:42,980
Ah so this is the break.

275
00:18:43,000 --> 00:18:47,280
This is so I get that break is almost the cost of a name enter.

276
00:18:47,320 --> 00:18:52,680
Then the next bit of information intense each time you see this it's that can enter key for Assad.

277
00:18:52,720 --> 00:18:55,890
So cluster my name in one line that I break line.

278
00:18:55,960 --> 00:19:01,420
Then I can press enter and it will automatically just adjust the string to allow me to continue typing

279
00:19:01,420 --> 00:19:05,730
so I'm doing this because I don't want to type too much to the right and off the screen.

280
00:19:05,890 --> 00:19:14,470
So I have customer name and then I'm injecting the variable and then I have beat or entered colon and

281
00:19:14,470 --> 00:19:17,750
then I'm going to inject the variable beat out.

282
00:19:17,860 --> 00:19:19,540
All right then I'm going to break again.

283
00:19:19,540 --> 00:19:25,630
So to me at this fast I'm just going to copy this set off the to at the every time break it to the next

284
00:19:25,630 --> 00:19:28,710
line and then they'd returned

285
00:19:32,000 --> 00:19:36,830
colon and then this would be beat in all right.

286
00:19:36,840 --> 00:19:38,950
And then say I didn't write it properly.

287
00:19:39,000 --> 00:19:43,920
So case matters very very much reclined again.

288
00:19:43,920 --> 00:19:48,920
And then the card type all right.

289
00:19:48,950 --> 00:19:54,900
And then we inject the variable which is car type.

290
00:19:55,050 --> 00:19:55,990
All right.

291
00:19:56,070 --> 00:19:56,700
And then.

292
00:19:56,700 --> 00:20:01,740
So the expectation though is that when we fill out our form and that we click Submit we're supposed

293
00:20:01,740 --> 00:20:04,280
to see all this information.

294
00:20:04,330 --> 00:20:13,970
And let me just add one more line which just is thank you for your knees.

295
00:20:14,220 --> 00:20:15,280
All right.

296
00:20:15,290 --> 00:20:16,710
So let's try that.

297
00:20:16,710 --> 00:20:19,050
So I press start.

298
00:20:19,050 --> 00:20:19,340
All right.

299
00:20:19,350 --> 00:20:24,110
So I have customer name test in third day or and it is Saturday.

300
00:20:24,120 --> 00:20:28,960
For one day to be returned is the fourth and a type of cars a lotta.

301
00:20:28,980 --> 00:20:34,610
And then I click submit and then there we go we have customer name the texture of the text box we have

302
00:20:34,620 --> 00:20:41,120
the date printed and the date and time date and time the car type is Lada.

303
00:20:41,280 --> 00:20:44,400
And then the thank you notes ha.

304
00:20:44,430 --> 00:20:50,610
So that's all we go about getting information from our farm and well manipulating it thereafter.

305
00:20:50,610 --> 00:20:57,630
So this manipulation is really just to present it's the manipulation could be to you know do our computation

306
00:20:57,630 --> 00:20:59,420
on the values that are there.

307
00:20:59,550 --> 00:21:03,880
It could be that we submitted to the database whatever it is the fact is.

308
00:21:03,960 --> 00:21:05,780
We know how to get the information.

309
00:21:05,790 --> 00:21:12,780
So later on we look at how we add things like validation and all the features like sending into the

310
00:21:12,780 --> 00:21:13,560
database.
