1
00:00:02,400 --> 00:00:08,550
Let's take a look at the lumetri scopes in the color workspace.

2
00:00:08,570 --> 00:00:15,650
You you'll have access to the scope so there are basically three scopes.

3
00:00:15,650 --> 00:00:24,500
So this is the waveform  this represents the image from the left to the right.

4
00:00:24,700 --> 00:00:27,500
If you move this you can see that

5
00:00:30,480 --> 00:00:32,180
you're reading it from the left to the right.

6
00:00:32,180 --> 00:00:35,270
So this is the girl in the picture actually.

7
00:00:35,270 --> 00:00:41,240
So if you know this you can see that as the girl moves from left to right the picture is also moving

8
00:00:44,230 --> 00:00:55,740
when you're grading it is mainly in three steps the first to use the waveform scopes and you want

9
00:00:55,770 --> 00:00:57,670
value between hundred to zero.

10
00:00:57,850 --> 00:01:06,730
So now this image is flat and it's shot in a log so we make this in between.

11
00:01:06,720 --> 00:01:10,050
Hundred to zero to pull up the highlights

12
00:01:10,660 --> 00:01:11,980
Bring down the shadows.

13
00:01:11,980 --> 00:01:20,890
So this is the first step do that go rgb curves put a point to bring the highlights slowly

14
00:01:23,390 --> 00:01:36,650
reach hundred or just below it next to go to the bottom part and you pull down the shadows do just

15
00:01:36,970 --> 00:01:42,390
a little so it is not necessary that it should reach zero

16
00:01:42,390 --> 00:01:48,040
you can even bring down so you can crush the blacks.

17
00:01:48,540 --> 00:01:54,810
So that is what it is called usually we make it just near zero.

18
00:01:56,850 --> 00:02:02,460
So this is the first step  next scopes the parade

19
00:02:05,500 --> 00:02:09,210
to the parade shows the red green and blue values.

20
00:02:09,330 --> 00:02:21,250
So the image is made of red green and blue color which makes the white so what you're to see is that

21
00:02:21,280 --> 00:02:25,070
make sure that all the levels are the same.

22
00:02:25,070 --> 00:02:32,810
So you can see that there is more blue in this than the green and the red

23
00:02:38,180 --> 00:02:47,170
go to the blue color and just bring it down so that it is balanced with the

24
00:02:50,220 --> 00:02:51,470
red and the green.

25
00:02:52,140 --> 00:03:06,980
So we made like almost equal we have changed the color cast so looks neutral

26
00:03:07,100 --> 00:03:10,280
third is vectorscope

27
00:03:10,420 --> 00:03:13,850
vectorscope know that you can select

28
00:03:13,850 --> 00:03:14,690
vectorscope

29
00:03:19,540 --> 00:03:27,970
this shows the different values of the color present in this see the red green blue and the

30
00:03:27,970 --> 00:03:35,870
complementary colors magenta yellow and cyan the whatever color changes you do.

31
00:03:35,950 --> 00:03:38,680
It should lie in this box.

32
00:03:38,680 --> 00:03:42,950
It should not cross this box.

33
00:03:42,980 --> 00:03:52,280
So this is mainly used to check the skin tone of the person so to do that you can

34
00:03:55,850 --> 00:04:05,330
select the skin tones of the person here to make sure that it is character it is almost lying in this

35
00:04:05,330 --> 00:04:05,660
line.

36
00:04:05,660 --> 00:04:08,940
This is the skin tone line.

37
00:04:09,020 --> 00:04:16,190
Show your subjects skin tone should lay in this line.

38
00:04:16,740 --> 00:04:28,630
If you make any corrections to make sure that her skin tone is lying in that to also so you can see

39
00:04:28,630 --> 00:04:33,250
that it is correct again.

40
00:04:33,320 --> 00:04:38,360
You can see this changing.

41
00:04:38,480 --> 00:04:43,440
That is the skin tone that should lay on that line correctly.

42
00:04:49,340 --> 00:04:58,070
So now we have not actually selected her all skin tones so we have to make sure we selected all

43
00:04:58,070 --> 00:04:59,600
of her skin tone values

44
00:05:04,170 --> 00:05:07,000
almost selected that

45
00:05:07,100 --> 00:05:18,320
So this is the three step process so you to use this three scopes this preset here so you

46
00:05:18,320 --> 00:05:19,940
can even use that

47
00:05:22,890 --> 00:05:26,470
to see those scopes here make corrections.
