1
00:00:09,570 --> 00:00:17,450
Everyone in this lesson, we are going to continue with the loop's subject for a while, I just want

2
00:00:17,450 --> 00:00:19,790
to show you a different kind of loop.

3
00:00:20,000 --> 00:00:25,250
It's going to be similar, but we are going to write it in a different way.

4
00:00:25,580 --> 00:00:29,530
So there's the WYO and do while loops.

5
00:00:29,900 --> 00:00:31,670
So let's see how this works.

6
00:00:31,920 --> 00:00:33,980
Let's go to Visual Studio Code.

7
00:00:35,170 --> 00:00:43,000
To our scripts that James file, so this time I'm just going to create a variable called Count.

8
00:00:45,410 --> 00:00:53,990
And I'm just going to assign zero to it, so now I'm going to start a while loop, so the while loop,

9
00:00:53,990 --> 00:01:01,250
it's not going to accept the three statements, the while loop is only going to accept the condition.

10
00:01:01,490 --> 00:01:03,560
So in this case, the condition.

11
00:01:04,630 --> 00:01:09,370
It's going to be that count is less than five.

12
00:01:10,980 --> 00:01:18,900
Then we just do pretty much the same thing, so we open and close curly braces and here let's just do

13
00:01:18,900 --> 00:01:22,440
console that log and just print.

14
00:01:23,890 --> 00:01:32,620
They count variable, so now we just need to increment this variable so again, we can do it in the

15
00:01:32,620 --> 00:01:34,210
loop declaration.

16
00:01:34,450 --> 00:01:36,820
This time we have to do it inside.

17
00:01:37,000 --> 00:01:44,650
So with the far loop, we just have a statement that's going to be executed at the end of each iteration

18
00:01:44,860 --> 00:01:46,090
with the wire loop.

19
00:01:46,300 --> 00:01:48,730
We just have to write it inside the loop.

20
00:01:49,030 --> 00:01:53,480
But what we are doing is basically the same as we are going to see.

21
00:01:53,800 --> 00:01:57,480
So I'm going to call the count variable.

22
00:01:57,490 --> 00:02:03,250
I'm just going to increment one after each iteration.

23
00:02:03,280 --> 00:02:06,790
So what we're doing here is exactly the same.

24
00:02:07,090 --> 00:02:15,490
But instead of starting the count variable here, then using the condition, then writing the line of

25
00:02:15,490 --> 00:02:23,260
code that's going to be executed at the end of each iteration is just a different way of writing it.

26
00:02:23,440 --> 00:02:26,890
So we start the variable before starting the loop.

27
00:02:27,190 --> 00:02:34,640
And any code that we want to execute at each iteration, we just have to write it inside.

28
00:02:35,020 --> 00:02:38,260
So by doing this, let's just save this.

29
00:02:39,660 --> 00:02:48,040
Refresh the page, and as you can see, we have pretty much the same result as we did with the for Loop.

30
00:02:48,660 --> 00:02:53,280
So now one more kind of loop that could be useful.

31
00:02:53,340 --> 00:02:55,500
Let me just comment all this.

32
00:02:59,010 --> 00:03:05,790
We also have a different kind of loop that it's the do while loop, so let me create a variable called

33
00:03:05,790 --> 00:03:10,380
Count and I'm just going to assign 10 to it.

34
00:03:12,070 --> 00:03:20,620
So now I'm just going to start this loop using the two key word and then opening and closing curly braces,

35
00:03:20,810 --> 00:03:24,420
so as you can see, it's a different way of writing it.

36
00:03:24,790 --> 00:03:29,590
So now it's not going to test anything at the first iteration.

37
00:03:29,830 --> 00:03:31,780
It's just going to go in.

38
00:03:32,320 --> 00:03:33,910
So this time, let's do it.

39
00:03:33,940 --> 00:03:35,470
And so the log.

40
00:03:37,760 --> 00:03:40,760
And let's bring the count variable.

41
00:03:41,950 --> 00:03:44,470
Then let's just do count.

42
00:03:45,800 --> 00:03:47,000
Plus, plus.

43
00:03:48,200 --> 00:03:52,620
So we can increment this variable and then at the end of the loop.

44
00:03:52,820 --> 00:03:54,020
So while.

45
00:03:55,480 --> 00:04:02,710
Open and close parentheses this time, we need to add the semicolon here, so now we are going to add

46
00:04:02,710 --> 00:04:09,520
the condition, which is going to be for this example, that count is less than five.

47
00:04:10,870 --> 00:04:18,940
So as you can see, since the beginning, this condition was false because the count was already said

48
00:04:18,940 --> 00:04:25,710
to 10, but let's see what happens when we save this and refresh the page.

49
00:04:25,720 --> 00:04:30,820
We can see that we just ran this loop at least once.

50
00:04:31,060 --> 00:04:33,040
So this could be useful.

51
00:04:33,050 --> 00:04:42,760
Sometimes we just run the loop the first time without testing any condition, and then we test the condition

52
00:04:42,760 --> 00:04:47,110
to see if we want to continue running this or not.

53
00:04:47,800 --> 00:04:51,520
So this was all that I wanted to talk about loops for the moment.

54
00:04:51,700 --> 00:04:58,000
In the next few lessons, we're going to dive a bit deeper into the conditioner's and then we're going

55
00:04:58,000 --> 00:05:02,010
to start using all this with our age HTML element.

56
00:05:02,380 --> 00:05:04,170
This is going to be exciting.

57
00:05:04,450 --> 00:05:06,250
So we'll see you in the next video.
