1
00:00:01,110 --> 00:00:07,390
So will come again this lesson is actually an exercise on what you have to do is you have to make and

2
00:00:07,510 --> 00:00:10,840
an OP that has an image of you slider.

3
00:00:11,120 --> 00:00:17,210
And as you slide through with this slide there the images in the image of you should change of course

4
00:00:17,240 --> 00:00:22,540
you try to make everything as dynamic as you can so you put your images in an array.

5
00:00:22,670 --> 00:00:29,120
You set the minimum and maximum of your slider with the size of the array and you navigate the images

6
00:00:29,120 --> 00:00:32,810
in the image of you depending on where you are in the slider.

7
00:00:33,020 --> 00:00:35,420
So I have provided you some images.

8
00:00:35,420 --> 00:00:36,840
These are those images.

9
00:00:36,890 --> 00:00:40,160
They are not named properly or just this is intentional.

10
00:00:40,160 --> 00:00:46,250
I just want you to see how we could use the names that we just find on the Internet or the files that

11
00:00:46,250 --> 00:00:52,740
we read from some sort of a network or back and so add them to your project and get us started on the

12
00:00:52,740 --> 00:00:53,510
good luck.

13
00:00:53,540 --> 00:00:59,120
And at this point you might pause the video for a few minutes or give it a shot on your own and then

14
00:00:59,120 --> 00:01:01,940
if you want it come back to my solution.

15
00:01:04,300 --> 00:01:05,310
So let's get started.

16
00:01:05,320 --> 00:01:06,630
Here is what I'm going to do.

17
00:01:06,630 --> 00:01:12,140
I'm going to go to school when I close this project and then I start hey I'm going to close this project

18
00:01:12,140 --> 00:01:12,580
does it.

19
00:01:12,580 --> 00:01:14,910
I don't know why there's so many of them open.

20
00:01:14,950 --> 00:01:20,980
I'm going to go ahead and say you manage a slide there slider.

21
00:01:21,340 --> 00:01:28,940
That is my app and in my image just slide there with I'm going to do is I'm going to go ahead in here

22
00:01:28,950 --> 00:01:39,860
on out all of these files in some when I copied the items on I usually like to place them all inside

23
00:01:39,860 --> 00:01:43,690
there on our folders so a new group from selection.

24
00:01:43,890 --> 00:01:45,990
I'm going to call it images.

25
00:01:46,290 --> 00:01:48,380
So we got that part taken care of.

26
00:01:48,660 --> 00:01:57,260
The next thing is I'm going to go to a storyboard and I'm going to add a slider this one for instance

27
00:01:57,900 --> 00:02:04,080
and or other problem with my Magic Mouse sometimes it doesn't work properly.

28
00:02:04,080 --> 00:02:09,160
So let's I add an image of you here now.

29
00:02:11,110 --> 00:02:13,220
So I'm going to put it there.

30
00:02:13,610 --> 00:02:21,700
And the only things I want to change is in the image view I want to say are icepack filled the same

31
00:02:21,700 --> 00:02:23,200
thing that I've done before.

32
00:02:23,410 --> 00:02:27,650
So this goes to the assistant editor load up are that age.

33
00:02:28,000 --> 00:02:32,140
I'm going to make art two outlets and one action.

34
00:02:32,230 --> 00:02:35,980
So this is my slide.

35
00:02:36,520 --> 00:02:41,060
This is my image of you.

36
00:02:41,210 --> 00:02:49,270
And this is going to be the action for the slide action that's about that.

37
00:02:49,270 --> 00:02:52,920
I have two properties and one action.

38
00:02:53,030 --> 00:02:57,540
So in that age that's where they got this go to that.

39
00:02:57,590 --> 00:02:59,800
And now I'm going to clean everything.

40
00:02:59,800 --> 00:03:00,550
I don't need

41
00:03:05,140 --> 00:03:11,930
but the first thing I need to do is I need to populate array with the name of all of these images.

42
00:03:11,940 --> 00:03:21,870
So here is what I'm going to do I'm going to stay up there and this and it's array let's call it images

43
00:03:21,960 --> 00:03:30,410
array in a new function call with that populates array.

44
00:03:30,720 --> 00:03:34,090
I'm going to say image array is a..

45
00:03:34,110 --> 00:03:38,470
Array lock in its heavy object.

46
00:03:38,640 --> 00:03:40,530
And here's a little trick I want to show you.

47
00:03:40,530 --> 00:03:43,170
That is from Mac operating system.

48
00:03:43,170 --> 00:03:48,990
If I go in here and I select all of these I had command C to copy.

49
00:03:49,200 --> 00:03:56,310
If I come by here and had command be it I truly copy paste the names of all of those files which really

50
00:03:56,310 --> 00:04:00,250
helps me whenever I'm doing testing or for whatever reason.

51
00:04:00,390 --> 00:04:06,960
I have a group of files that are static and I don't I can't you know copy their names of one at a time

52
00:04:07,200 --> 00:04:13,740
so I just go here to my finder copy these come and see come by here had come on the I pace all of the

53
00:04:13,740 --> 00:04:14,430
names.

54
00:04:14,430 --> 00:04:18,180
So now I have to do is I have to add the estranging marks for them.

55
00:04:18,180 --> 00:04:22,280
So dot dot dot dot.

56
00:04:22,380 --> 00:04:24,610
It's a little bit of a you know process.

57
00:04:24,620 --> 00:04:29,410
It's a lot better than having to type everything on our own.

58
00:04:29,410 --> 00:04:30,250
So.

59
00:04:30,750 --> 00:04:32,120
So that's.

60
00:04:32,400 --> 00:04:40,830
And finally I have one extra one so and this array is now populated with all of them.

61
00:04:41,010 --> 00:04:45,840
It doesn't matter whether you use this trick or if you actually typed them on or if you want to rename

62
00:04:45,840 --> 00:04:53,850
the files just find a way to populate all of the images inside an image array and then actually take

63
00:04:53,850 --> 00:04:59,820
this function with at the very bottom because I don't really need after this.

64
00:04:59,970 --> 00:05:06,620
What they do need to do is I need to call it in my view the Lord say my lord I'm going to say South

65
00:05:06,710 --> 00:05:12,650
Park played every song in this function is now being called right at the very beginning.

66
00:05:12,930 --> 00:05:18,120
And before this one if you remember I heard the commands were then click on the name of the function

67
00:05:18,150 --> 00:05:19,360
and I had failed.

68
00:05:19,680 --> 00:05:27,780
And now the next thing I want to do is this as the slide slides I have to find its value and I have

69
00:05:27,780 --> 00:05:30,800
to assign one of my images to it.

70
00:05:30,810 --> 00:05:35,600
But before that I need to set the minimum and maximum of my slider.

71
00:05:35,640 --> 00:05:39,630
So they represent the same minimum maximum of my array.

72
00:05:39,840 --> 00:05:50,780
So I'm going to say my a slider darts minimum value is going to be zero that's for sure.

73
00:05:50,850 --> 00:05:59,470
And my a slider dart maximum value it's going to be images array dot counts not.

74
00:05:59,550 --> 00:06:01,510
Think about that for a second.

75
00:06:01,890 --> 00:06:10,880
If my images is array that count is let's say 15 I set the maximum value to 15.

76
00:06:10,890 --> 00:06:19,260
It simply means I will include 15 itself which is not really a good thing because I don't have an index

77
00:06:19,320 --> 00:06:21,530
such as 15 in my array.

78
00:06:21,600 --> 00:06:23,170
I have one Beloit.

79
00:06:23,190 --> 00:06:32,820
I have 14 of them because the indexes are between zero to 14 that they make up for 15 objects.

80
00:06:32,820 --> 00:06:33,380
Right.

81
00:06:33,510 --> 00:06:39,880
So because of that I'm going to actually say the maximum value is images are a count minus one.

82
00:06:40,200 --> 00:06:43,060
So that's taking off.

83
00:06:43,150 --> 00:06:50,400
Now the next thing is I'm a sliding I have to get the value of my of my a slider so I'm going to say

84
00:06:51,130 --> 00:07:02,050
are integer my index is going to be my slider Dart's value.

85
00:07:02,310 --> 00:07:08,540
One of the problems I'm facing here is that the value is actually a flawed number that it has decimal

86
00:07:08,550 --> 00:07:09,280
points.

87
00:07:09,400 --> 00:07:15,480
And if I'm going to try to convert that into an integer I could simply go ahead in here and say get

88
00:07:15,480 --> 00:07:17,400
the integer part of it.

89
00:07:17,400 --> 00:07:25,320
This is however not the best approach simply because when I am converting it to integer I'm just dismissing

90
00:07:25,320 --> 00:07:26,660
the decimal part.

91
00:07:26,700 --> 00:07:35,760
So let me quickly explain that it means something such as 2.6 when we can see that two and two point

92
00:07:35,760 --> 00:07:36,830
ninety nine.

93
00:07:36,920 --> 00:07:40,620
Also be considered two which is not really a good option.

94
00:07:40,620 --> 00:07:48,450
I mean ideally we would like to see something such as 2.6 to be three and two point nine.

95
00:07:48,460 --> 00:07:54,690
Also it would be three but then we would want to see two point four nine will be true simply because

96
00:07:55,020 --> 00:07:57,040
that's how we round values.

97
00:07:57,180 --> 00:08:04,170
And because of that instead of doing our casting into integer I'm going to say let's do this let's say

98
00:08:04,170 --> 00:08:11,580
around and I'm going use around F for float and I'm going to say round that this is ideal for me.

99
00:08:11,580 --> 00:08:17,610
So then your round the value it takes it from the middle two point five and above they become twenty

100
00:08:17,910 --> 00:08:23,800
two point forty nine and below they become two essentially what I have you here.

101
00:08:23,850 --> 00:08:29,380
I should mention two other are essentially methods for mathematical calculations.

102
00:08:29,580 --> 00:08:38,730
One of them is c and c f essentially which means push everything to the ceiling in C two point six becomes

103
00:08:38,730 --> 00:08:46,740
three two point nine nine becomes three and two point 0 0 0 5 again becomes three because between two

104
00:08:46,740 --> 00:08:49,100
to three it goes to the ceiling of that.

105
00:08:49,380 --> 00:08:51,280
And there is another one called floor.

106
00:08:51,300 --> 00:08:57,990
And as you can imagine Flora would push two point six to two point nine nine to two to a point 0 0 0

107
00:08:57,990 --> 00:08:59,530
5 again to two.

108
00:08:59,700 --> 00:09:07,920
So that two of them around floor unsealed and depending on the situation you might want to use one of

109
00:09:07,920 --> 00:09:08,130
them.

110
00:09:08,130 --> 00:09:14,740
The one I want to use in here is actually round and I would use a round F because my value is in front.

111
00:09:14,970 --> 00:09:22,710
So now I have the value of my slider in a flop in an integer format.

112
00:09:22,710 --> 00:09:27,740
So the next thing I have to do is I have to say next thing is actually very simple right.

113
00:09:27,730 --> 00:09:36,690
I have to say my image of you that image is going to be a I emerge with an email name and a name for

114
00:09:36,690 --> 00:09:40,870
it is going to be images array object that index.

115
00:09:41,020 --> 00:09:42,830
Let's use a subscript this time.

116
00:09:42,840 --> 00:09:47,100
You know I always use the object that index lets just use a different format.

117
00:09:47,160 --> 00:09:56,590
So this time I'm going to say images array open brackets in front of it and say my index and that's

118
00:09:56,590 --> 00:09:58,090
about that.

119
00:09:58,090 --> 00:10:00,510
Let's see if it works.

120
00:10:00,550 --> 00:10:09,370
So once it launches on my simulator I should be able to use the slide there and go between different

121
00:10:09,370 --> 00:10:10,200
images.

122
00:10:11,430 --> 00:10:15,120
Perfect.

123
00:10:15,120 --> 00:10:15,630
All right.

124
00:10:15,640 --> 00:10:18,520
So that's about that for this assignment.

125
00:10:18,520 --> 00:10:21,320
It was a rather simple one.

126
00:10:21,610 --> 00:10:25,850
This method you can see right now with remember that populates the array.

127
00:10:26,050 --> 00:10:32,320
The other two matters the ones that are actually kind of important are these set them anywhere a maximum

128
00:10:32,320 --> 00:10:33,400
of my slider.

129
00:10:33,430 --> 00:10:40,360
And then they get the rounded version of the value of my smy there and they plug that into my images

130
00:10:40,680 --> 00:10:46,470
to get the correct image name and convert the image name into a major issue.

131
00:10:46,510 --> 00:10:53,170
In turn will be plugged into the age of my image of you and that's about that.

132
00:10:53,170 --> 00:10:55,180
With that in mind let's move on.
