1
00:00:01,230 --> 00:00:07,850
So I coming again in this list and I'm going to really quickly recap everything I've done in this section.

2
00:00:07,890 --> 00:00:12,810
You don't really have to do anything in this class and you don't have to follow me along and do things

3
00:00:12,810 --> 00:00:19,740
or code the stuff you probably just funny and or sit back and relax as I reach up everything and somehow

4
00:00:19,740 --> 00:00:22,980
refresh your memory as to you know things that we have done.

5
00:00:23,130 --> 00:00:23,970
So Scott.

6
00:00:24,080 --> 00:00:33,000
Scott and I'm going to start a new project I'm going to call it Camp or let's call it yet again because

7
00:00:33,000 --> 00:00:40,340
I know I have to remove it later on temporary jobs section 3 a.m. 3 cups of Shanthi.

8
00:00:40,390 --> 00:00:46,140
We're going to have a look at the things that we did primarily in the story both so in a storyboard

9
00:00:46,200 --> 00:00:52,830
are we covered these and those we made them view controllers and we learned that every view contour

10
00:00:52,830 --> 00:00:59,280
of would need its own class on this the fault you can tourists connected to something called The View

11
00:00:59,310 --> 00:01:00,550
Controller.

12
00:01:00,550 --> 00:01:07,130
And if I want to add a new you or I view controllers of I have to have the command and that is fine

13
00:01:07,150 --> 00:01:14,680
you file and then we assign them to the identity inspector and then we can do things on them the way

14
00:01:14,690 --> 00:01:15,920
we have been doing.

15
00:01:15,930 --> 00:01:21,720
We learned that this little guy in here means that this view quencher is the initial view controller

16
00:01:22,050 --> 00:01:28,620
and then we could just change it to another one to be our initial view controller from there on we went

17
00:01:28,620 --> 00:01:30,450
into talking about segues.

18
00:01:30,450 --> 00:01:34,510
We tried it with control from one view and one other one.

19
00:01:34,710 --> 00:01:40,610
We gave our segues identifiers so we know what they do and what they mean.

20
00:01:40,920 --> 00:01:46,520
And then we talked about them in here we talked about labels and buttons.

21
00:01:46,530 --> 00:01:52,100
You know we talked about how we could use the Baden's and how we could assign functions to them.

22
00:01:52,110 --> 00:01:55,700
For instance this father that I have in here is called the pink one.

23
00:01:55,890 --> 00:02:01,760
I'm going to go to you contour and that H in here I'm going to say IAB action.

24
00:02:02,010 --> 00:02:04,390
Let's say Pean function.

25
00:02:04,980 --> 00:02:11,140
And then we could either do this using the assistant at it's all or we could just of type the code then

26
00:02:11,200 --> 00:02:12,960
yeah I know a storyboard.

27
00:02:12,960 --> 00:02:19,320
If we go on select all of you can Torah's outlet in the connections we will end up seeing that action

28
00:02:19,350 --> 00:02:22,180
Pean function has been received.

29
00:02:22,400 --> 00:02:28,740
And if I derived from it over to here I can do something like a touch up inside which is a default behavior

30
00:02:28,740 --> 00:02:30,240
of all the Baden's.

31
00:02:30,270 --> 00:02:35,710
Now what that means is it means pink function will be called every time we stop on this button.

32
00:02:35,880 --> 00:02:43,320
Of course this op with currently in this very estate would crash simply because I know that declaration

33
00:02:43,710 --> 00:02:49,860
of a function but this function doesn't have any implementation or any body.

34
00:02:49,860 --> 00:02:56,160
So we have to copy that code to my dad and Matt and he my dad and I have to actually write the body

35
00:02:56,160 --> 00:02:58,610
of it even if it means nothing.

36
00:02:58,650 --> 00:02:59,900
It has to exist.

37
00:02:59,940 --> 00:03:02,540
Otherwise our OP is going to crash.

38
00:03:02,550 --> 00:03:03,870
So that was one thing.

39
00:03:03,870 --> 00:03:10,650
The other thing that we discussed was this If you go ahead into your viewpoint or that edge on your

40
00:03:10,650 --> 00:03:18,720
have a property for your button let's say we non autonomy we will discuss this in for details in the

41
00:03:18,720 --> 00:03:19,200
future.

42
00:03:19,200 --> 00:03:22,170
These are memory management models of the property.

43
00:03:22,260 --> 00:03:26,470
Don't worry about if you don't know them right now you just need to follow these steps.

44
00:03:26,550 --> 00:03:31,530
Like I've said several times throughout this course there are some topics that I can't just bring them

45
00:03:31,530 --> 00:03:37,730
up at the beginning simply because it makes the makes that lesson or that class quite overwhelming.

46
00:03:37,740 --> 00:03:43,530
So some things I expect you to just follow along with me and then as the time passes I will come back

47
00:03:43,530 --> 00:03:45,780
to them and I will explain what they are.

48
00:03:45,960 --> 00:03:48,470
So here I have an IB outlet.

49
00:03:48,510 --> 00:03:49,350
It's a you.

50
00:03:49,350 --> 00:03:50,170
I buy them.

51
00:03:50,250 --> 00:03:52,530
That is called my body.

52
00:03:52,700 --> 00:03:59,580
So remember that was defined declaring a function for a boy and this was the an outlet for a body.

53
00:03:59,580 --> 00:04:01,920
And so I'm going to go to storyboard in here.

54
00:04:01,920 --> 00:04:08,460
I'm going to select my outlet and now I have received an outlet called my button which I can derive

55
00:04:08,490 --> 00:04:09,710
from it to the button.

56
00:04:09,750 --> 00:04:12,150
And then they get connected to each other.

57
00:04:12,150 --> 00:04:17,690
Now if you have buttons like this you could go to a place such as your view would you it.

58
00:04:17,700 --> 00:04:25,740
Not necessarily but you could say my body in the target and I could add an action to them and that action

59
00:04:25,740 --> 00:04:28,480
doesn't have to be an IP action.

60
00:04:28,530 --> 00:04:32,700
So that could be ovoid let's call it my action.

61
00:04:32,880 --> 00:04:40,770
And that I would say at Target within itself and the action is selected or is called My action.

62
00:04:40,900 --> 00:04:50,820
And for the control event let's say touch of inside which is that one not outside touch up inside for

63
00:04:50,820 --> 00:04:51,930
instance.

64
00:04:51,930 --> 00:04:53,550
So that's about that.

65
00:04:53,550 --> 00:05:02,480
Now this then every time that is being tapped on it triggers this function the next thing we talked

66
00:05:02,480 --> 00:05:08,530
about in this lesson that we quickly have a look was segmented controls which are very simple.

67
00:05:08,540 --> 00:05:13,830
They have multiple different Baden's only one of them can be active at any given time.

68
00:05:13,970 --> 00:05:22,250
And then we use something such as my segmented control dart selected segment index to know which one

69
00:05:22,250 --> 00:05:24,620
is the current the selected one.

70
00:05:24,620 --> 00:05:28,950
So for instance here the Kaante selected one is segment zero.

71
00:05:29,060 --> 00:05:36,120
If I change that to one we will see segment 1 and the selected disappear.

72
00:05:36,120 --> 00:05:39,970
So that's how we understand which one is currently selected.

73
00:05:39,980 --> 00:05:42,730
I could reach back and that's what happened.

74
00:05:43,100 --> 00:05:49,430
And then from there on we moved on to talking about textfield Fisher again very simple text takes we

75
00:05:49,430 --> 00:05:55,820
could change their format and they look by changing their board style as well as their backgrounds and

76
00:05:55,820 --> 00:05:58,760
what not they could change the keyboard type.

77
00:05:58,770 --> 00:06:04,280
And there was some other stuff here that will talk at some point like the capitalization or auto correction

78
00:06:04,280 --> 00:06:07,090
or a smart dashes or insets or whatnot.

79
00:06:07,220 --> 00:06:15,060
And then we also learned that there is something called If I had a text with you I text fields that

80
00:06:15,740 --> 00:06:22,960
if I had something called my text I felt the I could use something such as my text failed Dadda resign

81
00:06:22,960 --> 00:06:29,090
the first responder which would essentially get rid of the keyboard for that text.

82
00:06:29,120 --> 00:06:31,220
So remember that as well.

83
00:06:31,430 --> 00:06:38,910
Then in here we talked about the sliders on switch so I'm going to bring both of them in one go slider

84
00:06:39,920 --> 00:06:43,520
and a switch and that's that.

85
00:06:43,790 --> 00:06:49,970
But remember the sliders they had minimum and maximum values and they were floating numbers and liquidy

86
00:06:49,970 --> 00:07:00,410
feel wanted used things such as round or a seal or floor or just casting them into an integer to get

87
00:07:00,410 --> 00:07:02,050
the integer value of them.

88
00:07:02,060 --> 00:07:05,500
But the default behavior of them was a floating number.

89
00:07:05,700 --> 00:07:10,180
And we behind the switch with had a value card is on.

90
00:07:10,340 --> 00:07:14,580
And if it was in that is on the mod was true it means it was on.

91
00:07:14,660 --> 00:07:17,660
Otherwise it meant it was off like this.

92
00:07:17,660 --> 00:07:19,870
So that was another thing that we discussed.

93
00:07:20,120 --> 00:07:28,010
And then after that we moved on into a Staples which are kind of similar to slider's in many ways they

94
00:07:28,010 --> 00:07:34,580
increment and decrement something we could change the minimum maximum value or the step in which they

95
00:07:34,580 --> 00:07:42,440
go we could let them go point five step at any given time or let's say 10 steps each time they had things

96
00:07:42,440 --> 00:07:49,360
such as auto repeat continuous Arap that we discussed that you hold by then or to repeat functions.

97
00:07:49,430 --> 00:07:56,210
Continuous means that it will constantly change not only when you let go of the top and drop means the

98
00:07:56,210 --> 00:08:03,080
ends they mean the noise number below the minimum will be pushing us back to the maximum and the highest

99
00:08:03,080 --> 00:08:10,370
number after the maximum pushes us back into the minimum number and then let me see what else we talked

100
00:08:10,370 --> 00:08:15,260
about we talked about image views of course that we use image use to show images of course.

101
00:08:15,260 --> 00:08:18,270
We use one of them and that's called image name.

102
00:08:18,350 --> 00:08:23,210
And we got a name of an image that we had within our project in our bunda.

103
00:08:23,210 --> 00:08:30,710
We also talked about their content more than we used a thing as they fill an aspect fit and then we

104
00:08:30,710 --> 00:08:32,190
talked about anything else.

105
00:08:32,210 --> 00:08:37,020
I don't think so I think that was pretty much it about this section.

106
00:08:37,220 --> 00:08:43,730
So we covered these areas and now the combination of all of these you should be ready to essentially

107
00:08:43,730 --> 00:08:47,000
do your assignments which are coming up in the next two.
