1
00:00:00,210 --> 00:00:06,990
High again in one of our previous lessons you spoke of how to make utterly out constraints in Interface

2
00:00:06,990 --> 00:00:07,700
Builder.

3
00:00:07,950 --> 00:00:13,550
In this last century going through the same thing but you're going to do it entirely programmatically.

4
00:00:13,800 --> 00:00:17,480
And there are a lot of reasons why you might want to do with programmatic.

5
00:00:17,610 --> 00:00:23,820
Namely because there are a lot of situations where the outlets are not drawn on the Interface Builder

6
00:00:24,090 --> 00:00:28,850
you end up building the outlets as you go along dynamically.

7
00:00:29,070 --> 00:00:34,950
Let's say you have a number of majors that are being read from some database and you want to post all

8
00:00:34,950 --> 00:00:35,540
of them.

9
00:00:35,550 --> 00:00:38,600
You are not sure how many of them are going to be there.

10
00:00:38,730 --> 00:00:44,160
So you have to essentially write something like a for loop that fetches all of your images and then

11
00:00:44,160 --> 00:00:46,090
applies all of them to your interface.

12
00:00:46,230 --> 00:00:53,270
So you need to know how to do things programmatically more often than we do things in Interface Builder.

13
00:00:53,580 --> 00:00:59,550
So let's go ahead to exclude and here I'm going I start a new app as usual.

14
00:00:59,740 --> 00:01:04,530
It's called it or it's only in coding.

15
00:01:05,040 --> 00:01:07,550
Everything stays the same as always.

16
00:01:08,720 --> 00:01:12,560
So here in my view controller I'm going to have only one outlet.

17
00:01:12,590 --> 00:01:20,020
I'm going to vote on I think constrains to that of one outlet on the that out when I make you my view.

18
00:01:20,030 --> 00:01:24,600
So I'm going to say let us call it the red box as I usually call it.

19
00:01:24,750 --> 00:01:30,100
It's you I view and that is a I view with a frame.

20
00:01:30,320 --> 00:01:31,420
And here's the thing.

21
00:01:31,460 --> 00:01:38,120
Whenever you are doing things that you're doing them inside coding it really helps if you set a CGI

22
00:01:38,120 --> 00:01:39,840
record of zero.

23
00:01:40,070 --> 00:01:46,220
That helps your other developers to know anyone who works on your code to know that this is going to

24
00:01:46,220 --> 00:01:48,350
be set using constraints.

25
00:01:48,350 --> 00:01:54,440
Because if it doesn't have any frame it simply means it's not going to be drawn is going to be a zero

26
00:01:54,860 --> 00:01:57,200
space rectangle for it.

27
00:01:57,200 --> 00:02:02,240
So for us I'm going up with a seizure like zero so anyone else who reads the code is going to know that

28
00:02:02,570 --> 00:02:06,830
hey this is going to be set using constraints.

29
00:02:06,830 --> 00:02:07,950
So that's the bomb.

30
00:02:08,080 --> 00:02:16,850
And I knew that the first thing of course I need to do is sort of you are view I need to out of my red

31
00:02:16,850 --> 00:02:25,490
box there so my view is either in the red box with a chart then that is a very particular instruction

32
00:02:25,490 --> 00:02:32,040
that we have to use and that's called translate to resizing maps into constraints.

33
00:02:32,240 --> 00:02:33,910
And you have to set this too far.

34
00:02:33,950 --> 00:02:36,290
I would explain to you what it means.

35
00:02:36,290 --> 00:02:38,720
So there are two situations.

36
00:02:38,720 --> 00:02:45,740
Either you have made your views a using Interface Builder which is what you have been doing until this

37
00:02:45,740 --> 00:02:49,160
point or you have made them using coding.

38
00:02:49,160 --> 00:02:57,200
And if you have made your objects using coding it will automatically start adding constraints to it

39
00:02:57,200 --> 00:02:59,540
based on the size of it.

40
00:02:59,540 --> 00:03:04,240
Remember that if this wasn't Jurich zero you would have something like this.

41
00:03:04,330 --> 00:03:13,820
I'm going to make a temporary value so let them be CGI records of some values in here and then based

42
00:03:13,820 --> 00:03:20,120
on those values the machine would automatically add some constraints for you would say you have put

43
00:03:20,120 --> 00:03:25,670
the extra 20 and Y to be hundred and then have to be 200 on a height of 200.

44
00:03:25,700 --> 00:03:32,290
For instance the numbers of just you know are throwing in there based on those we'll try to add constraints.

45
00:03:32,300 --> 00:03:38,130
And I'm saying don't do that because I'm going to manually add the constraints myself.

46
00:03:38,150 --> 00:03:47,530
Now if you're your objects or your out this are made using clothing by default the value is true.

47
00:03:47,720 --> 00:03:54,230
So by default these auto resizing is happening unless you explicitly say no because you're going to

48
00:03:54,230 --> 00:03:56,120
make the constraints manually.

49
00:03:56,360 --> 00:04:02,930
Now the other side of it is if you make your outlets in Interface Builder which the default value will

50
00:04:02,930 --> 00:04:09,920
be false simply because the interface field assumes you're going to add constraints manually in there.

51
00:04:10,220 --> 00:04:16,070
So keep that in mind that whenever you make objects you have to set this value to force.

52
00:04:16,160 --> 00:04:22,100
I know I kind of made complicated by saying that there is interface when there are it is coding.

53
00:04:22,160 --> 00:04:29,630
You can keep it like you can always make this false if you want to add things because it either is false

54
00:04:29,720 --> 00:04:35,070
and you're just making it false Once again or it is not false and you have to make it worse.

55
00:04:35,210 --> 00:04:37,290
So that's that.

56
00:04:37,840 --> 00:04:42,500
OK so now we have that you have told the machine we're going to add constraints and I'm going out.

57
00:04:42,500 --> 00:04:45,990
My very first thing and that's going to be my red.

58
00:04:46,420 --> 00:04:54,200
I'm going to say that say height constraint or height I'm sure I'm going to say constrain it to the

59
00:04:54,200 --> 00:04:59,060
very easiest one of all is adding a constant value.

60
00:04:59,090 --> 00:05:01,840
When I say give me a height of 200.

61
00:05:02,090 --> 00:05:07,700
So all that is doing is saying well there is a higher STEINKUEHLER that's going to be 200.

62
00:05:07,850 --> 00:05:13,400
If you want to have a visual representation of that I'm going to do it and other temporary thing in

63
00:05:13,400 --> 00:05:14,620
here real quick.

64
00:05:14,900 --> 00:05:20,110
So if I had you I view and my view was

65
00:05:23,480 --> 00:05:30,110
this would be equivalent of doing is control dragging and saying height and then going to my dimensions

66
00:05:30,160 --> 00:05:32,670
and saying height is 200.

67
00:05:32,720 --> 00:05:35,080
That would be the same thing.

68
00:05:35,180 --> 00:05:39,510
So I'm not going to do that hitting the interface builder I worked with programmatic.

69
00:05:39,740 --> 00:05:46,840
So we got that and I think I had forgotten something crucial or red box God I want to color is you.

70
00:05:46,850 --> 00:05:51,170
I color dot the red so we can actually see.

71
00:05:51,350 --> 00:05:53,430
So that was the easiest of constraint.

72
00:05:53,470 --> 00:05:58,700
I think constant thing that is constant for what I want it to are that other constrain that is based

73
00:05:58,760 --> 00:06:02,650
on something else something that we have been doing so often.

74
00:06:02,870 --> 00:06:09,230
So here I'm going to go in here and say let's have another constraint and I'm going to say let's let's

75
00:06:09,230 --> 00:06:11,120
call it that red X.

76
00:06:11,120 --> 00:06:19,390
That's going to become my red box dot or X anchor.

77
00:06:19,410 --> 00:06:27,460
I'm going to say crusting yourself to equal to and evaluate you it is the center of my view.

78
00:06:27,470 --> 00:06:36,130
So it's going to be self that if you do not center X and curve that may make this a little bit broader

79
00:06:36,140 --> 00:06:37,830
so you can see everything.

80
00:06:38,270 --> 00:06:43,490
So I made a new kind of strength and that is going to be cross-training.

81
00:06:43,710 --> 00:06:55,770
I read the boxes center X to self-view center X and then very important I have to say red X dot is active.

82
00:06:56,090 --> 00:07:03,440
I have to say this constant is actually currently active or function and do the same thing for the Y.

83
00:07:03,440 --> 00:07:11,780
I'm going to say red white becomes red box the center Y anchor dot constrained.

84
00:07:12,170 --> 00:07:20,380
And I want I can stand it to self to view not view that go of view the center.

85
00:07:20,520 --> 00:07:21,680
Why anchor.

86
00:07:21,880 --> 00:07:28,750
And of course then again I'm going to go ahead and say red light is active and that is through as well.

87
00:07:29,060 --> 00:07:37,370
OK so so far we have managed to set our height Aha said its center in terms of x and y and the one thing

88
00:07:37,370 --> 00:07:38,480
we are still missing.

89
00:07:38,480 --> 00:07:45,290
If you wanted to make sure this thing actually shows up is setting a a bit I'm careful and forced to

90
00:07:45,290 --> 00:07:50,720
think about anchoring when I should do it a slightly different B simply because I want to show you how

91
00:07:50,780 --> 00:07:51,710
other things work.

92
00:07:51,710 --> 00:07:57,370
So I'm going to say let's get with constraint with Konst.

93
00:07:57,470 --> 00:08:02,720
I'm trying to save up space because I know it's going to be a very very long year.

94
00:08:02,730 --> 00:08:09,920
So let's lay out constraints and this is essentially initialising constraint This is like the father

95
00:08:09,920 --> 00:08:14,840
of all constraints is is every single bit of information you can add into it.

96
00:08:14,870 --> 00:08:17,430
I'm adding it so it's going to be.

97
00:08:17,630 --> 00:08:20,060
What is the item you are trying to constrain.

98
00:08:20,060 --> 00:08:22,430
What's the that you're saying.

99
00:08:22,460 --> 00:08:28,940
What's the relation to which I am What's the good you're trying to constrain What's the multiplier in

100
00:08:28,940 --> 00:08:32,070
there and what's the Konstantinov if there isn't one.

101
00:08:32,210 --> 00:08:37,650
So let's go ahead and write all of these down and then say the item is obviously red box that's there's

102
00:08:37,670 --> 00:08:42,760
no question about it are really you they want to set it off this guy.

103
00:08:42,770 --> 00:08:49,520
So he's going to be in this layout constraint that attribute that to it.

104
00:08:49,580 --> 00:08:56,050
So bear with me for a second as I try to get myself a little bit more space.

105
00:08:56,060 --> 00:09:02,570
I'm going to call this w OK and maybe it gets you to the other side.

106
00:09:02,780 --> 00:09:03,130
OK.

107
00:09:03,140 --> 00:09:09,350
So now we can actually see everything nice and clean so that I actually keep that name.

108
00:09:09,500 --> 00:09:16,380
So the video kind of thing and then and it's now constant red box art is a tribute to it.

109
00:09:16,460 --> 00:09:18,680
And then he's going to say what is the relation.

110
00:09:18,680 --> 00:09:21,710
So there is going to be and it's Lay constrained.

111
00:09:21,760 --> 00:09:30,230
Dutch relations got equality and then I've got the I'D them actually I'm not going to come to any items.

112
00:09:30,230 --> 00:09:31,700
I'm going to set it to nil.

113
00:09:32,120 --> 00:09:38,340
And then attribute of the other item I'm going to call it to be a normal tribute.

114
00:09:38,570 --> 00:09:44,290
And then the multiplier is going to be one and I Konstantinov who is going to be on one hundred and

115
00:09:44,300 --> 00:09:45,440
fifty.

116
00:09:45,440 --> 00:09:51,780
So essentially I'm saying produce and it's less constrained for red box that takes this.

117
00:09:51,820 --> 00:09:57,050
That makes it equal to one hundred fifty.

118
00:09:57,080 --> 00:10:04,100
I'm not saying to somebody else and I'm not using that that's from somebody else and I'm not multiplying

119
00:10:04,100 --> 00:10:05,840
that value by any numbers.

120
00:10:05,840 --> 00:10:09,170
I'm just saying whatever it is hundred fifty used That's value.

121
00:10:09,470 --> 00:10:18,620
And then I could go ahead and say red box that kind of strains or bad things and then we have two different

122
00:10:18,620 --> 00:10:22,320
types of constrained the one is the one I'm using right now.

123
00:10:22,550 --> 00:10:31,920
And the You also have red marks that constraints prove your form which allows you to add an array of

124
00:10:31,920 --> 00:10:32,530
const things.

125
00:10:32,530 --> 00:10:39,790
So if I want to try out multiple ones I would just put all of them within an array something like that.

126
00:10:39,870 --> 00:10:43,400
You know the first one and the next one the next one so on and so forth.

127
00:10:43,560 --> 00:10:47,880
For now I only have one so I'm only going to use the other singular mode.

128
00:10:47,970 --> 00:10:51,560
But if you want it you could use the plural form as well.

129
00:10:51,810 --> 00:10:53,150
So that's about that.

130
00:10:53,150 --> 00:11:00,540
We made ourselves a red view or red box and that red box doesn't have a frame and instead everything

131
00:11:00,570 --> 00:11:03,730
in it is being declared using constrains.

132
00:11:03,750 --> 00:11:09,660
Now for that kind of stance I have to constrain the height of which apparently forgot to activate it

133
00:11:10,410 --> 00:11:12,330
is active is true.

134
00:11:12,330 --> 00:11:13,390
That's my bad.

135
00:11:13,770 --> 00:11:17,220
And then I had an X envoy and care for it.

136
00:11:17,220 --> 00:11:25,770
Whenever you are adding constraints like this like saying red box or anything off center X anchor constrained

137
00:11:25,770 --> 00:11:26,800
to whatever.

138
00:11:26,970 --> 00:11:33,420
You could either separately put them in a different variable and then activate it or you could just

139
00:11:33,420 --> 00:11:44,190
drop the value but all together like this and then say he's active and there are merits for doing both

140
00:11:44,190 --> 00:11:51,010
of these methods sometimes you want to have access to red white for instance later on you want to animate

141
00:11:51,020 --> 00:11:55,950
it or change it depending on something and sometimes you don't really care about you just want it to

142
00:11:55,950 --> 00:12:02,190
be to be active at all times so it's actually good I made most of these so you can have a look at both

143
00:12:02,190 --> 00:12:02,990
of them.

144
00:12:03,240 --> 00:12:07,340
And then we finally made a conscious thing which we added as a kind of strange.

145
00:12:07,350 --> 00:12:12,570
Whenever you add kind of sense you don't need to really activate them because when you add them they

146
00:12:12,570 --> 00:12:15,190
are active boy by default.

147
00:12:15,390 --> 00:12:17,360
So let's go ahead and run this.

148
00:12:17,580 --> 00:12:24,460
And once my simulator loads up will be able to see a box in the center of the scene.

149
00:12:24,510 --> 00:12:27,870
It's got a vet of one hundred and fifty.

150
00:12:27,960 --> 00:12:32,190
The height of 200 I center is at the center of the view.

151
00:12:32,340 --> 00:12:39,260
So that was a quick introduction to adding Konstanz you'll see more of these when we do more apps.

152
00:12:39,360 --> 00:12:45,510
You will end up doing some programmatic constraints at the end of the day on as much as you can.

153
00:12:45,510 --> 00:12:50,040
You have to try and get away in the interface when there but then there will be times that you need

154
00:12:50,040 --> 00:12:52,010
to do constraints.

155
00:12:52,290 --> 00:12:54,510
And yeah I assume the next lesson.
