1
00:00:00,480 --> 00:00:07,400
Sober come back again in this exercise we're going to use a combination of a wire rotation just to recognize

2
00:00:07,400 --> 00:00:13,120
that I you I pinched the riser to rotate on a scale a wide view.

3
00:00:13,310 --> 00:00:15,940
So I'm going to pause the video for a few seconds.

4
00:00:15,980 --> 00:00:17,480
You give it a shot on your own.

5
00:00:17,510 --> 00:00:20,750
And then if you wanted to can follow along with my solution as well.

6
00:00:23,620 --> 00:00:23,970
OK.

7
00:00:24,010 --> 00:00:32,070
So I'm going to go to Mexico now and I'm going to start a new project called Just shows and transform

8
00:00:33,010 --> 00:00:36,420
because that's essentially what it is a transformation.

9
00:00:36,770 --> 00:00:47,780
And my storyboard I'm going to make myself a you I view which I'm going to make it to be 256 on 256.

10
00:00:47,790 --> 00:00:52,920
As always this part of the work I'm actually going to go through them quite quickly because I know that

11
00:00:53,280 --> 00:00:57,150
you guys know exactly how to do it you don't really need my help with it.

12
00:00:57,190 --> 00:01:04,220
So this is the red box and that's all I need in my interface field.

13
00:01:04,570 --> 00:01:07,680
Now my actual programming is swift.

14
00:01:07,710 --> 00:01:16,920
I need to have two gestures so I'm going to say let's call it wrote just that's going to be a rotation

15
00:01:16,920 --> 00:01:19,230
just for recognizer.

16
00:01:19,290 --> 00:01:27,930
I'm going to have a vowel let's call it scaler just it's going to be a u i pinch gesture recognizer.

17
00:01:28,350 --> 00:01:29,990
Now in my view a lot.

18
00:01:30,000 --> 00:01:33,900
I'm going to go ahead and essentially initialize both of them.

19
00:01:33,930 --> 00:01:40,320
There is really practically no difference between doing both of these in the interface there or if you

20
00:01:40,320 --> 00:01:45,660
want to do it here in the court are would both work exactly identically with on one end within the code

21
00:01:45,660 --> 00:01:47,970
so that we get to see it here as well.

22
00:01:48,240 --> 00:01:55,030
So it just becomes you like rotation just for recognizer of yourself.

23
00:01:55,110 --> 00:01:58,830
And we need to have an action with a selector.

24
00:01:58,830 --> 00:02:05,030
So I'm going to say that action is called rote action or something to that effect.

25
00:02:05,490 --> 00:02:14,050
And then I'm going to have to say I have a scale gesture which is going to be a I pinched gesture recognizer

26
00:02:14,280 --> 00:02:24,600
with Target's self and action being a selector Salek the center of a scale action.

27
00:02:24,600 --> 00:02:26,910
So now I need to have both of these actions.

28
00:02:26,970 --> 00:02:32,550
So I'm going to say a function rotation action and it has an arc.

29
00:02:32,610 --> 00:02:36,180
It doesn't actually need to have an argument so there isn't.

30
00:02:36,180 --> 00:02:42,420
I thought first I can have the argument is because I wanted to get the gesture but the gestures already

31
00:02:42,420 --> 00:02:45,210
have a kind of a global variable.

32
00:02:45,300 --> 00:02:47,570
So I don't need to have an argument here.

33
00:02:47,940 --> 00:02:55,470
So I have a rotation action and I have the other one which is called the scalar action and that's that

34
00:02:55,470 --> 00:02:56,180
one.

35
00:02:56,310 --> 00:03:03,630
Finally in my view that note I'm going to have to say we should add both of these to our red box.

36
00:03:03,630 --> 00:03:13,030
So when I say red box dot I'll just show recognizer Roths gesture and the red box thought I just recognize

37
00:03:13,590 --> 00:03:15,030
the scale gesture.

38
00:03:15,390 --> 00:03:21,410
And finally this is giving me an error saying that your selector methods are not exposed as objective

39
00:03:21,420 --> 00:03:22,070
see.

40
00:03:22,410 --> 00:03:24,400
So I'm going to have to do two.

41
00:03:24,420 --> 00:03:26,760
This is something we have seen many times before.

42
00:03:26,820 --> 00:03:32,550
The part of swift for I'm guessing and the new versions this will be this will be gone.

43
00:03:32,550 --> 00:03:33,700
So that's about that.

44
00:03:33,720 --> 00:03:39,330
My view of the lot of both of the gestures are initialized underboss applied to the red box.

45
00:03:39,570 --> 00:03:43,700
And now we have to actually do teams with them in their functions.

46
00:03:43,860 --> 00:03:50,280
So I'm going to fold this one and I'm going to go to my rotation action and say in the rotation action

47
00:03:50,740 --> 00:03:58,790
red box dot transforms becomes red box start transformed those rotated.

48
00:03:59,190 --> 00:04:04,630
And the value of they want rotate is the rotation of the rotation gesture.

49
00:04:04,710 --> 00:04:13,490
I'm going to say let's new wrote to be rotations just sheer dot rotation and I'm going up right.

50
00:04:13,490 --> 00:04:15,530
Got C.G. fruit in here.

51
00:04:15,570 --> 00:04:17,500
Now I'm working on this application.

52
00:04:17,520 --> 00:04:22,770
Even though I know it is not going to work because I want to show you something that is a very important

53
00:04:22,770 --> 00:04:27,940
concept something that is going to go wrong now and we have to fix it once it loads.

54
00:04:27,960 --> 00:04:34,470
We should see some really unexpected results so if I try to do this you can see that it's rotating with

55
00:04:34,530 --> 00:04:36,530
really unexpected values.

56
00:04:36,540 --> 00:04:43,640
And the reason for it is this the value of the rotation just is constantly adding to itself.

57
00:04:43,650 --> 00:04:49,630
So if I'm rotating these and try to only look at the two tops that I have on the screen you find rotate

58
00:04:49,650 --> 00:04:52,630
this say 90 degrees which is like this.

59
00:04:52,740 --> 00:04:59,170
That's going to be 90 degrees that is being recorded into my rotation just share and then when I wrote

60
00:04:59,170 --> 00:05:05,010
it down under 90 degrees the first 90 degrees and the second one are getting our data to each other.

61
00:05:05,130 --> 00:05:10,950
So it's kind of adding the values one is there by the time itself and to remedy that well you're going

62
00:05:10,950 --> 00:05:17,910
to do it if you're going to reset this value to zero every time we make a rotation so I'm going to come

63
00:05:17,910 --> 00:05:22,460
in here and say well we got the value we rotated the red box.

64
00:05:22,470 --> 00:05:25,950
Now you have to reset to zero.

65
00:05:26,180 --> 00:05:28,470
So let's go ahead and check it out again.

66
00:05:28,510 --> 00:05:35,170
What I read on the application and this time in every roll cycle we're going to add a little rotation

67
00:05:35,170 --> 00:05:36,180
to the red box.

68
00:05:36,300 --> 00:05:43,680
But then it's going to zero itself out and if we rotate the way we wanted rotate so what station is

69
00:05:43,680 --> 00:05:46,110
working the way you want it to rotate.

70
00:05:46,110 --> 00:05:54,030
So that's one thing that you have to keep in mind that the amount of rotation is actually being constantly

71
00:05:54,120 --> 00:05:58,640
added tweets if we will face a very similar situation with this scale.

72
00:05:58,650 --> 00:06:08,520
So in this case I'm going to say let me show a scale that's going to be a scale just sheer scale and

73
00:06:08,520 --> 00:06:15,330
this value is actually constantly multiplying itself by the previous one because it's a ratio so the

74
00:06:15,330 --> 00:06:18,650
ratio is based on the default value of one.

75
00:06:18,710 --> 00:06:23,330
And now he's saying well it's now 1.1 times of the previous one.

76
00:06:23,520 --> 00:06:28,830
And then when it gets another one it's not going to multiply by the default one is going to multiply

77
00:06:28,860 --> 00:06:32,230
by the previous one which is not something we want.

78
00:06:32,250 --> 00:06:41,330
So I'm going to say Redbox not transform transform is going to be a red box not transform the scale

79
00:06:41,360 --> 00:06:42,180
the boy.

80
00:06:42,400 --> 00:06:46,670
And the value we want is the newest scale for both x and y.

81
00:06:47,070 --> 00:06:54,210
Newer scale but once I'm done with that I'm going to say a scale just sheer scale defaulted back to

82
00:06:54,210 --> 00:06:54,770
one.

83
00:06:54,840 --> 00:06:57,690
Don't keep the current value in it.

84
00:06:57,690 --> 00:06:59,130
So I'm going to run this again.

85
00:07:00,940 --> 00:07:09,370
And now we can scale properly and we can also rotate properly sometimes that the gesture doesn't really

86
00:07:09,370 --> 00:07:15,310
recognize which one you're trying to do with a rotation you're attempting or it is the escape tempting

87
00:07:15,580 --> 00:07:17,360
but that's perfectly fine.

88
00:07:17,360 --> 00:07:22,150
And yeah that's that's why I have to tell you about these two guys.

89
00:07:22,180 --> 00:07:25,120
There is another thing that you might want to keep an eye on.

90
00:07:25,120 --> 00:07:32,020
And that's the state of a gesture recognizer are the states are very similar to the same states that

91
00:07:32,020 --> 00:07:33,150
we have for touches.

92
00:07:33,150 --> 00:07:35,740
They are begin are unchanged.

93
00:07:35,750 --> 00:07:39,250
And so sometimes you can actually do things.

94
00:07:39,270 --> 00:07:42,620
It just shows doors and or does begin.

95
00:07:42,820 --> 00:07:48,670
And you can obviously read up on all of those on on the manual under header files as well.

96
00:07:48,700 --> 00:07:52,210
So that was it made this exercise and I would you in the next lesson.
