1
00:00:00,640 --> 00:00:03,070
So will come back again in this exercise.

2
00:00:03,070 --> 00:00:09,010
You have to use what you have learned from both of you animations as well as the animation blocks or

3
00:00:09,100 --> 00:00:14,770
either of them that you think you can manage it to make an animation loop the animation loop is essentially

4
00:00:14,770 --> 00:00:20,740
something that you have a little you eye view or any kind of outlet that passes through the screen over

5
00:00:20,740 --> 00:00:25,930
and over and over every time it goes from left to right and it reaches the right side of the screen

6
00:00:26,230 --> 00:00:30,150
then jumps by the beginning and read does the exact same thing.

7
00:00:30,160 --> 00:00:33,420
Let me show you what they mean in the actual simulator.

8
00:00:33,430 --> 00:00:39,520
This is the animation loop that I wanted to produce a little UI view as code red box that goes from

9
00:00:39,520 --> 00:00:42,160
left to right continuously.

10
00:00:42,160 --> 00:00:44,180
So keep that in mind.

11
00:00:44,200 --> 00:00:50,290
Pause the video if you want to and give it a try and then if you want it you can have a look at my solution

12
00:00:50,320 --> 00:00:50,860
as well.

13
00:00:55,930 --> 00:00:56,360
OK.

14
00:00:56,430 --> 00:01:03,180
So I'm going to start those then I'm going to go to ex-school make your project called animation.

15
00:01:05,140 --> 00:01:08,240
And in my estimation look the only thing I need in this story.

16
00:01:08,250 --> 00:01:10,280
What is the red box.

17
00:01:10,350 --> 00:01:12,690
So that's going to be a you view.

18
00:01:13,020 --> 00:01:21,690
I'm going to make it maybe 128 by one hundred twenty eight points and a bank on that is right load up

19
00:01:21,690 --> 00:01:27,430
my assistant and say this is red X.

20
00:01:27,510 --> 00:01:32,090
That's essentially all I have to do in the visual side of the mouth.

21
00:01:32,340 --> 00:01:40,620
So here is how I'm thinking of doing this animation and thinking of resetting the position to the utmost

22
00:01:40,710 --> 00:01:44,490
left running animation.

23
00:01:46,820 --> 00:01:51,440
Once animation is done the reset again.

24
00:01:51,820 --> 00:01:54,380
So I want to do this process over and over.

25
00:01:54,380 --> 00:02:01,310
So I want to reset the position of this red box to the utmost left corner of the screen then the animation

26
00:02:01,730 --> 00:02:05,220
until the utmost right.

27
00:02:05,790 --> 00:02:09,640
Then once it is done I want to reset.

28
00:02:09,680 --> 00:02:13,440
So when I reset the get to the left we run the animation.

29
00:02:13,490 --> 00:02:14,690
We get that right.

30
00:02:14,840 --> 00:02:19,060
Then we reset and we keep doing this over and over and over.

31
00:02:19,070 --> 00:02:21,470
So let's go ahead and write all of these.

32
00:02:21,470 --> 00:02:26,840
In our programming language as opposed to our literal language.

33
00:02:27,110 --> 00:02:34,580
So here I'm going to go ahead and say I have a function called reset and my reset function does this

34
00:02:34,670 --> 00:02:42,230
says red box dot center becomes a C.G. point of two values.

35
00:02:42,350 --> 00:02:43,710
One of those values.

36
00:02:43,730 --> 00:02:46,280
Why is the one they don't want to change.

37
00:02:46,280 --> 00:02:52,310
Red Box dot center dot why the X-File you however wants to become 0.

38
00:02:52,340 --> 00:02:55,580
It wants to go to the most left corner of the screen.

39
00:02:55,730 --> 00:03:04,610
So that's the reset one and have another function function called animate and my animated DAW's this

40
00:03:06,080 --> 00:03:11,040
and we get a better formatting up every function by default is void.

41
00:03:11,090 --> 00:03:14,030
So you could either keep it here or drop it.

42
00:03:14,240 --> 00:03:17,680
Essentially this one and Gathorne are exactly the same thing.

43
00:03:17,690 --> 00:03:20,060
They both have no returns.

44
00:03:20,330 --> 00:03:27,530
So in the animate I'm going to say you I you dot animate with completion let's say within two seconds

45
00:03:28,080 --> 00:03:39,410
I want to do an animation of making the red box Center to become CGU point of these values and the values

46
00:03:39,440 --> 00:03:41,440
are these X doesn't.

47
00:03:41,600 --> 00:03:45,250
So why doesn't change so the why is it stays there.

48
00:03:46,100 --> 00:03:52,020
X however become self taught to view that frame.

49
00:03:52,130 --> 00:04:01,250
Dr. V so x essentially goes as far right to the utmost right side of the screen.

50
00:04:01,520 --> 00:04:03,050
Why the red boxes.

51
00:04:03,080 --> 00:04:05,340
Why doesn't change the center.

52
00:04:05,540 --> 00:04:13,610
Why it stays intact essentially I should remember using self more often and then at completion when

53
00:04:13,610 --> 00:04:17,600
the completion happens I want to say reset again.

54
00:04:17,660 --> 00:04:26,120
So reset let's look back at all the code once again at the beginning of the animation was the beginning

55
00:04:26,120 --> 00:04:27,120
of the application.

56
00:04:27,140 --> 00:04:29,070
I'm going to say reset.

57
00:04:29,630 --> 00:04:37,730
So when I reset we go all the way to the left side of the screen but we don't begin the animation since

58
00:04:37,730 --> 00:04:38,690
we don't do that.

59
00:04:38,690 --> 00:04:43,790
And when I say well do a self Da'ath animate.

60
00:04:43,880 --> 00:04:50,930
So at the very beginning we go all the way to the zero and I start animating when the animation happens.

61
00:04:50,990 --> 00:04:53,890
The animation goes through the when it completes.

62
00:04:53,900 --> 00:04:57,710
And when I say self that reset valuation.

63
00:04:57,770 --> 00:05:06,620
So the research takes us to the left animate animates us to the right and then resets and that's all

64
00:05:06,620 --> 00:05:08,010
we have to do for here.

65
00:05:08,270 --> 00:05:11,820
Go ahead and run this see Forget what you are hoping to get.

66
00:05:14,720 --> 00:05:15,740
That's about that.

67
00:05:15,740 --> 00:05:24,200
Now if you want to be super careful you would actually account for the sides of the red box to completely

68
00:05:24,200 --> 00:05:26,630
disappear and then reappear.

69
00:05:26,630 --> 00:05:28,560
So I can show you how you could do that.

70
00:05:28,580 --> 00:05:31,200
Let me show you how to do that for the reset.

71
00:05:31,220 --> 00:05:39,700
I'm going to say go back to the left as much as the weight of the red box divided by two.

72
00:05:39,860 --> 00:05:41,780
And in the negative direction.

73
00:05:41,840 --> 00:05:50,830
So does that mean it means negative red box dot frame size dot net divided by two.

74
00:05:51,050 --> 00:05:58,750
So Pushit to the left as much as one half beat as well to the left and for the animate.

75
00:05:58,760 --> 00:06:02,110
I'm going to go ahead and say Let me get myself a little more space.

76
00:06:02,150 --> 00:06:06,730
Say go to the furtherest point on the screen.

77
00:06:06,810 --> 00:06:11,990
But that's going to be the center of the red box not the left corner of it.

78
00:06:12,100 --> 00:06:17,680
When I say add a little value to it self read box.

79
00:06:17,690 --> 00:06:25,560
I remember to solve this time frame dot sized dot vet divided by two.

80
00:06:25,700 --> 00:06:33,530
So when you go with the left subtract one half with as well for you go to the right and one half with

81
00:06:33,650 --> 00:06:34,430
as well.

82
00:06:34,430 --> 00:06:35,720
So let's see it again.

83
00:06:39,310 --> 00:06:40,340
Yes.

84
00:06:41,260 --> 00:06:43,670
That's exactly how I want it to be.

85
00:06:43,870 --> 00:06:45,790
So that's a very simple exercise.

86
00:06:45,790 --> 00:06:52,060
It shows you a lot of things about how to combine a lot of the code that we all really have learned

87
00:06:52,060 --> 00:06:55,450
because that's most of what programming is about.

88
00:06:55,460 --> 00:07:01,840
It's not about this groundbreaking finding some weird new technology is about knowing how to use the

89
00:07:01,840 --> 00:07:04,390
things you already know properly.

90
00:07:04,570 --> 00:07:07,240
So let's move on to our next lesson.
