1
00:00:01,380 --> 00:00:06,240
Hello, everyone, so in the last video, we discussed the algorithm for implementing in place observed,

2
00:00:06,600 --> 00:00:10,420
and I told you guys to just give it a shot, try to write the code yourself.

3
00:00:11,010 --> 00:00:13,800
So what is the time, complexities or the time?

4
00:00:13,800 --> 00:00:18,060
Complexity is actually in Logan and the space complexity.

5
00:00:18,070 --> 00:00:20,280
So as the name suggests in place.

6
00:00:20,580 --> 00:00:25,800
So the meaning of in place is that it will actually constrain time so that space is going to be big

7
00:00:25,800 --> 00:00:26,410
of one.

8
00:00:27,030 --> 00:00:28,080
Now as discussed.

9
00:00:28,110 --> 00:00:29,870
So what we will also consider this area.

10
00:00:30,300 --> 00:00:35,210
So let's say the array elements are five, eight, three, one and six.

11
00:00:35,610 --> 00:00:36,860
And what was our approach?

12
00:00:37,110 --> 00:00:39,390
So I will divide the array into two parts.

13
00:00:40,110 --> 00:00:46,620
So the first part is actually containing the hip element and the second part is actually containing

14
00:00:46,620 --> 00:00:47,640
our unsorted area.

15
00:00:48,540 --> 00:00:49,470
And we discussed it.

16
00:00:49,470 --> 00:00:52,920
But we will also I will start reversing the area from the next one.

17
00:00:52,950 --> 00:00:57,690
So this is an this is an X zero, so I will start traversing the area from the next one.

18
00:00:58,440 --> 00:00:59,910
And our approach is very simple.

19
00:00:59,920 --> 00:01:02,680
So one by one, I will push the elements into my hip.

20
00:01:03,120 --> 00:01:07,960
So what will happen to the hip range will increase and the unsorted range will decrease.

21
00:01:08,310 --> 00:01:13,850
So you can insert elements and obviously the next zero is one.

22
00:01:13,890 --> 00:01:15,480
So this is my child index.

23
00:01:15,810 --> 00:01:20,510
And again, you have to find out the pain index, which is simply index minus one by two.

24
00:01:20,910 --> 00:01:28,260
And this loop is actually it is containing the child makes such an index value when then its value will

25
00:01:28,260 --> 00:01:28,900
become three.

26
00:01:28,950 --> 00:01:30,030
It will become two.

27
00:01:30,030 --> 00:01:30,990
And then it's three.

28
00:01:30,990 --> 00:01:32,220
And then it will become four.

29
00:01:32,700 --> 00:01:35,490
So simply you have to compare it in five and nothing will happen.

30
00:01:35,940 --> 00:01:39,030
Then you will take elementary inside your heap.

31
00:01:39,660 --> 00:01:43,490
Then heap sizes increase and assorted sizes will decrease.

32
00:01:43,490 --> 00:01:44,810
So similarly, three will come.

33
00:01:45,030 --> 00:01:46,470
So the index will become two.

34
00:01:46,470 --> 00:01:50,250
You can see child index will become two, then you can swap that image.

35
00:01:50,320 --> 00:01:52,170
Three will come here, five will come here.

36
00:01:52,470 --> 00:01:54,320
And similarly then you will take one.

37
00:01:54,630 --> 00:01:57,090
So basically one will be in this position.

38
00:01:57,090 --> 00:01:58,680
So the child index is three.

39
00:01:58,680 --> 00:02:00,330
You can see the child index is three.

40
00:02:01,080 --> 00:02:05,130
Again, you will do the comparison to one and it will get stabbed.

41
00:02:05,280 --> 00:02:07,650
So this is when then one in three will get stabbed.

42
00:02:07,710 --> 00:02:09,180
So this is one and this is three.

43
00:02:09,570 --> 00:02:12,450
And similarly, you will take the element forward into consideration.

44
00:02:12,690 --> 00:02:17,840
So finally, I he will increase and the state will that elements.

45
00:02:17,850 --> 00:02:19,380
There are no certain elements left.

46
00:02:20,400 --> 00:02:25,550
So you will push six at this position, so finally, what is my hip?

47
00:02:25,590 --> 00:02:32,940
So this is one, then it is three, then it is five, then it is containing eight and this is six.

48
00:02:33,690 --> 00:02:34,250
Simple.

49
00:02:34,710 --> 00:02:40,050
So basically, if you will convert it into an area again to the level of traversal.

50
00:02:40,050 --> 00:02:40,800
So this is one.

51
00:02:40,800 --> 00:02:41,530
This is three.

52
00:02:41,550 --> 00:02:42,570
This is five.

53
00:02:42,600 --> 00:02:43,400
This is it.

54
00:02:43,410 --> 00:02:44,310
And this is six.

55
00:02:44,820 --> 00:02:45,890
So very, very simple.

56
00:02:45,930 --> 00:02:49,620
But we have to do we will just reverse from index one.

57
00:02:49,620 --> 00:02:56,190
We will start reversing from the next one and we can copy paste our old code, our old insert function

58
00:02:56,190 --> 00:03:03,810
called now one thing we cannot directly use our one triadic because our own priorities create a vector.

59
00:03:04,110 --> 00:03:06,680
So we cannot just blindly copy our code.

60
00:03:06,690 --> 00:03:08,710
So we just have to do minor, minor changes.

61
00:03:09,180 --> 00:03:10,980
Now let's start writing the code.

62
00:03:14,550 --> 00:03:21,540
So this is my file and the place he ordered CPV, so let us create a function so that the function will

63
00:03:21,540 --> 00:03:25,200
be void because it will just sort Meyera, it will not do anything else.

64
00:03:25,630 --> 00:03:26,920
It will not return anything.

65
00:03:27,510 --> 00:03:29,340
So the name of the function is inbuilt.

66
00:03:29,340 --> 00:03:29,940
He sort.

67
00:03:31,240 --> 00:03:36,340
So what this function will take, so this function will take two things as input to first, one is actually

68
00:03:36,340 --> 00:03:36,810
the Eddie.

69
00:03:38,910 --> 00:03:44,820
And let's say the name of that is in and the second one is actually the size of the ADL and.

70
00:03:47,410 --> 00:03:49,090
So what is the first step?

71
00:03:49,120 --> 00:03:54,410
So first step is very simple, but we are going to do it so we will build keep inside the area.

72
00:03:55,330 --> 00:03:56,860
So first step is very simple.

73
00:04:00,460 --> 00:04:01,810
We will build deep.

74
00:04:02,820 --> 00:04:03,740
In prudery.

75
00:04:04,780 --> 00:04:10,970
We will not use any extra space for building the ship, I told you, we have to start our trading from

76
00:04:10,990 --> 00:04:15,010
next one because we can assume that index zero is already in a heap.

77
00:04:15,670 --> 00:04:16,480
So you can see.

78
00:04:18,420 --> 00:04:26,190
So the value at index zero is already inside the heap, we have to start premising from index one and

79
00:04:26,190 --> 00:04:29,100
then we will take element in to help one by one.

80
00:04:29,100 --> 00:04:29,670
Simple.

81
00:04:31,830 --> 00:04:35,910
So I will start from one and then I listened and I placeless, simple.

82
00:04:36,950 --> 00:04:39,470
So what they have to do, we have to copy paste of something called.

83
00:04:40,860 --> 00:04:46,140
So this is my Plotka class, this is insert function now what we are doing, so this is our elemental

84
00:04:46,140 --> 00:04:47,260
I was pushing elements.

85
00:04:47,670 --> 00:04:49,260
Now, this thing is not required.

86
00:04:51,770 --> 00:04:54,070
We have to copy paste only this much amount of gold.

87
00:05:12,380 --> 00:05:13,790
So after copy pasting the code.

88
00:05:13,820 --> 00:05:14,870
So this is the situation.

89
00:05:16,120 --> 00:05:20,950
Now we have to do some changes, for example, because nothing peculiar to say so.

90
00:05:22,300 --> 00:05:27,310
This is my child index, so what is child index, you can see so the index is nothing.

91
00:05:27,310 --> 00:05:32,230
It is just the index of the area, so it will start from one, then it'll become two, then it will

92
00:05:32,230 --> 00:05:33,280
become three and so on.

93
00:05:33,580 --> 00:05:35,860
So first, I have to update my child index.

94
00:05:35,860 --> 00:05:38,230
Which index is actually the index of the area.

95
00:05:38,260 --> 00:05:39,370
So this is simply a.

96
00:05:41,260 --> 00:05:42,070
So first thing.

97
00:05:43,400 --> 00:05:49,310
So this is very simple, very minor change, so child indexes, a and one more thing.

98
00:05:50,830 --> 00:05:57,100
So here, the name of the is input, but we are actually using Piku everywhere, so let's change the

99
00:05:57,100 --> 00:06:00,770
name to the name of the input that is Piku.

100
00:06:01,350 --> 00:06:05,540
So first I am finding out the child index, which is correct, then this is the standard code.

101
00:06:05,980 --> 00:06:10,860
So while Calix is good then it'll find the index, then do the comparison.

102
00:06:11,500 --> 00:06:17,370
If the child index is Milovan, so do the part then update the child index as to the break.

103
00:06:19,030 --> 00:06:20,660
So this break is actually.

104
00:06:20,680 --> 00:06:23,800
So this statement actually makes the inner most loop.

105
00:06:23,800 --> 00:06:25,400
So the innermost loop is by loop.

106
00:06:25,690 --> 00:06:28,120
So this big statement can only break by loop.

107
00:06:28,120 --> 00:06:29,480
It cannot break for loop.

108
00:06:30,040 --> 00:06:34,450
So this thing you should remember now after doing this.

109
00:06:35,880 --> 00:06:40,880
So actually, our help is right now, our help is ready then what we have to do.

110
00:06:40,890 --> 00:06:44,760
So basically now we have to call the remove minimum function and times.

111
00:06:46,470 --> 00:06:54,240
So what we have to do, we have to call remove minimum function and times now what we are doing here.

112
00:06:58,530 --> 00:07:07,210
So after this cold, so let's say my input at is actually, let's say five eight, one, two and zero.

113
00:07:07,230 --> 00:07:11,240
So let's say this is my input area five it one to zero.

114
00:07:11,760 --> 00:07:14,730
So after passing through this code, what will happen to.

115
00:07:16,190 --> 00:07:20,750
This is the value of I, so I will vary from index one to the last index.

116
00:07:21,200 --> 00:07:22,450
So index is nothing.

117
00:07:22,460 --> 00:07:23,120
It is just.

118
00:07:24,730 --> 00:07:28,740
The value of the added, just the index of the area, so first five elements.

119
00:07:29,080 --> 00:07:32,610
So this element, five inside our heap, so take element.

120
00:07:33,700 --> 00:07:34,740
So nothing will happen.

121
00:07:34,960 --> 00:07:39,320
So this condition will become false and we will break.

122
00:07:39,730 --> 00:07:45,600
So I have element one Satake element one, then compared element one with element five.

123
00:07:45,610 --> 00:07:50,500
So we will do the stripping then you will take element to so element to it.

124
00:07:50,530 --> 00:07:52,820
So then you will find out your paint index.

125
00:07:53,320 --> 00:07:56,650
So this is element to the index is basically.

126
00:07:56,650 --> 00:07:59,140
So this is index zero one, two and three.

127
00:07:59,360 --> 00:08:01,800
Again you have to do the slapping part of this is it.

128
00:08:01,810 --> 00:08:04,270
And this is to again take the elements.

129
00:08:04,270 --> 00:08:05,530
And also this is element zero.

130
00:08:05,860 --> 00:08:06,820
You will do the slapping.

131
00:08:06,820 --> 00:08:07,810
Part of this is two.

132
00:08:07,810 --> 00:08:08,350
This is.

133
00:08:10,040 --> 00:08:14,570
So this is zero, then you will slap one in zero, so when will come in and zero will come here?

134
00:08:14,600 --> 00:08:17,820
So finally, this is your area.

135
00:08:17,850 --> 00:08:24,190
So this is 01, then I have five here, then I have it here and then I have two here.

136
00:08:24,860 --> 00:08:26,270
So this is your.

137
00:08:27,530 --> 00:08:30,380
Minimum heap, so this school is actually for minimum.

138
00:08:30,650 --> 00:08:36,500
We are trying to implement our minimum priority queue and if you convert converted into an area.

139
00:08:36,530 --> 00:08:39,370
So this is zero, then I have one, then I have five.

140
00:08:39,380 --> 00:08:40,400
Then I have it.

141
00:08:40,909 --> 00:08:42,059
And then I have two.

142
00:08:42,080 --> 00:08:43,700
So 015 eight two.

143
00:08:44,480 --> 00:08:46,620
Now, this is our input area.

144
00:08:47,090 --> 00:08:52,250
So this area has now been converted into this area and now we have to do so.

145
00:08:52,250 --> 00:08:55,520
We just have to call the remove minimum function and times.

146
00:08:58,610 --> 00:09:05,060
Or you can also call and sometimes both will be correct, because if you recall, and minus one times,

147
00:09:05,060 --> 00:09:08,060
so what will happen, only this element will be left.

148
00:09:08,240 --> 00:09:10,490
So it is your choice whether to.

149
00:09:10,730 --> 00:09:11,990
So this is not irrelevant.

150
00:09:12,020 --> 00:09:15,170
So basically, the size will be one, size will be one.

151
00:09:15,170 --> 00:09:19,940
And it is your choice because the element is going to establish itself.

152
00:09:20,570 --> 00:09:22,220
So it doesn't make any sense to call.

153
00:09:22,220 --> 00:09:26,840
And times you can also call and minus one times, let's say we will call and times.

154
00:09:30,950 --> 00:09:38,010
So if you remember how they removed minimum function, Wilberg, so this was my area zero, then one.

155
00:09:38,480 --> 00:09:44,120
So this was my minimum 015 eight and do so I have to call the minimum function.

156
00:09:44,130 --> 00:09:48,350
So it will going it will Sub-Zero and also zero will come here and two will come here.

157
00:09:48,800 --> 00:09:55,040
Then actually in the original code we were trying to delete element zero, but here we will not delete

158
00:09:55,040 --> 00:09:55,330
zero.

159
00:09:55,340 --> 00:09:58,340
We will just assume that element zero has been removed.

160
00:09:58,790 --> 00:09:59,840
We just have to adjust.

161
00:09:59,870 --> 00:10:05,950
So what we will do, I will take a variable size and instead of doing B good artpop back.

162
00:10:07,130 --> 00:10:13,340
So work bob back function do so it also decrease the size it removed the elemental back function, do

163
00:10:13,340 --> 00:10:18,710
two things so it will remove the element and it would also decrease the size by one.

164
00:10:19,050 --> 00:10:21,730
So we will not use proper function material.

165
00:10:21,740 --> 00:10:24,170
So we will just reduce size minus minus.

166
00:10:24,440 --> 00:10:28,100
So size minus minus indicates that the element has been removed.

167
00:10:29,900 --> 00:10:35,420
Because we do not have to actually remove the element, we just have to assume so for assumption, we

168
00:10:35,420 --> 00:10:41,600
will just take a variable size and we will lose size minus minus and size minus minus indicates that

169
00:10:41,600 --> 00:10:42,700
the element is removed.

170
00:10:43,790 --> 00:10:44,360
Simple.

171
00:10:45,290 --> 00:10:46,300
So let's do this.

172
00:10:46,310 --> 00:10:52,320
And also, after stepping, we have to put two added side operations here compared to with one in five.

173
00:10:52,340 --> 00:10:55,120
And again, I will say absolutely will come here.

174
00:10:55,130 --> 00:11:02,750
And when will commercial now to compare to with it, but do not compare two with zero because this is

175
00:11:02,750 --> 00:11:04,630
removed, this element has been removed.

176
00:11:05,480 --> 00:11:07,760
So that's why I will lose size minus.

177
00:11:07,760 --> 00:11:08,180
Minus.

178
00:11:10,810 --> 00:11:18,010
So what we have to do, so let's take a variable size, so initially my initial my area is containing

179
00:11:18,010 --> 00:11:18,650
N elements.

180
00:11:19,420 --> 00:11:24,850
So what we have to do so first thing is basically we have to swab the first element with the last element.

181
00:11:25,840 --> 00:11:31,870
Because I want to remove medium function and time so that the first element, which is zero with the

182
00:11:31,870 --> 00:11:38,350
last element to what is the last element, so I will use size minus one to size minus one will give

183
00:11:38,350 --> 00:11:41,800
me the index of the last element and then if you will see.

184
00:11:45,160 --> 00:11:52,210
So here's what I was doing, so I was calling the function back, but here I will just write says minus

185
00:11:52,210 --> 00:11:53,310
minus Simbel.

186
00:11:53,920 --> 00:12:00,970
So this indicates that the element has been removed, but this is only assumption to element is removed.

187
00:12:03,840 --> 00:12:05,970
Now you can just copy paste the code.

188
00:12:06,960 --> 00:12:08,780
Because we have to don epiphytes.

189
00:12:10,820 --> 00:12:12,170
It's down here, Biffy.

190
00:12:29,820 --> 00:12:32,130
OK, so this is the code for down here, Biffy.

191
00:12:33,180 --> 00:12:34,740
So let me check the loops first.

192
00:12:34,770 --> 00:12:35,760
OK, so this is correct.

193
00:12:36,790 --> 00:12:38,710
So, again, we have to do down here.

194
00:12:38,740 --> 00:12:41,650
If I saw the paint index zero, correct.

195
00:12:42,130 --> 00:12:48,430
While Drew, I am finding out the left index, right index, then the index is actually the paint index,

196
00:12:48,430 --> 00:12:52,610
then left index is less than I should be good outside.

197
00:12:52,650 --> 00:12:54,630
So here I will not use peculiarities.

198
00:12:54,640 --> 00:12:56,370
I will simply use the size variable.

199
00:12:57,730 --> 00:12:58,840
So the size variable.

200
00:12:59,590 --> 00:13:00,520
Now this is correct.

201
00:13:00,550 --> 00:13:07,060
So again, instead of peculiar because we do a simple vector here, so simple simply I will use the

202
00:13:07,060 --> 00:13:07,720
same variable.

203
00:13:07,730 --> 00:13:08,650
So this variable.

204
00:13:09,840 --> 00:13:10,950
Then this is correct.

205
00:13:12,070 --> 00:13:17,510
So I'm scrapping and then Bendix is getting ablated with the index, so correct.

206
00:13:17,890 --> 00:13:23,360
So this is one time I have to perform it and times I have to call remove Menom function and times.

207
00:13:23,920 --> 00:13:24,830
So let's do it.

208
00:13:25,390 --> 00:13:27,870
So now to call the function and times what I will do.

209
00:13:27,880 --> 00:13:31,480
So while size is guerdon or goes to one.

210
00:13:33,650 --> 00:13:35,670
We have to call the movement function and.

211
00:13:59,470 --> 00:14:01,080
So, yes, everything seems fine.

212
00:14:02,470 --> 00:14:07,810
So as discussed, how many times we have to remove minimum function, so we have to remove minimum function

213
00:14:07,810 --> 00:14:14,320
and times, so the size, the value of sizes and while size is bigger than order, close to one end

214
00:14:14,320 --> 00:14:15,470
size, minus minus.

215
00:14:15,700 --> 00:14:17,410
So let me save this loop.

216
00:14:18,420 --> 00:14:25,290
So this law will run and time's simple, this loop is going to run and times are good, then are close

217
00:14:25,290 --> 00:14:26,790
to one end size, minus minus.

218
00:14:27,420 --> 00:14:33,390
And see what I was trying to tell you, that instead of using this condition, says the Noriko's to

219
00:14:33,390 --> 00:14:36,480
one, you can also write the condition, says guerdon one.

220
00:14:36,990 --> 00:14:37,320
Why?

221
00:14:37,320 --> 00:14:41,100
Because see if the value of sales is one, then what is happening here.

222
00:14:41,110 --> 00:14:42,500
So the value is one.

223
00:14:42,810 --> 00:14:45,940
So one minus one that is zero and this is also zero.

224
00:14:46,110 --> 00:14:50,910
So what you are doing, you're swapping AOF zero with zero.

225
00:14:50,910 --> 00:14:51,990
Where is the eddy?

226
00:14:52,350 --> 00:14:54,490
So you are swiping the same two elements.

227
00:14:54,510 --> 00:14:59,550
So that's why I told you that you can also write is lower than when both are correct if you will is

228
00:14:59,550 --> 00:15:00,170
good then one.

229
00:15:00,420 --> 00:15:08,070
So the least value of sales will be to and in that case you will be swapping the element of zero with

230
00:15:08,100 --> 00:15:10,320
each to both are correct.

231
00:15:10,320 --> 00:15:11,190
It is your choice.

232
00:15:12,360 --> 00:15:13,920
So this is our standard called.

233
00:15:14,920 --> 00:15:21,010
We do not have to do anything here, we just have to right size here instead of peculiarities, you

234
00:15:21,010 --> 00:15:24,070
will use the size, variable and similarly size.

235
00:15:24,670 --> 00:15:26,140
So everything will remain the same.

236
00:15:29,540 --> 00:15:34,560
So afraid of the cold, we have to test whether our goal is working, correct or not.

237
00:15:35,300 --> 00:15:38,330
So let's make our input very.

238
00:15:41,630 --> 00:15:49,610
So let's say the elements are five one, two zero and eight, so this is zero and eight.

239
00:15:50,300 --> 00:15:54,880
So I have five elements then I have to call the function in place.

240
00:15:55,880 --> 00:16:00,500
So let's copy the name I have to pass to I have to pass booting the area.

241
00:16:00,500 --> 00:16:01,070
And this is.

242
00:16:04,820 --> 00:16:06,500
So the name of the ad is and put.

243
00:16:08,020 --> 00:16:09,670
And there are five elements.

244
00:16:10,830 --> 00:16:13,440
And now let's try to pin down our elements.

245
00:16:27,720 --> 00:16:32,640
So this is my input today, I am calling the function in place, he observed, and we know it is advised

246
00:16:32,640 --> 00:16:33,300
by a defense.

247
00:16:34,270 --> 00:16:38,960
And in C++, that is our best bet, if it's by default and then I'm bending the elements.

248
00:16:39,280 --> 00:16:40,750
So what will be my output?

249
00:16:42,920 --> 00:16:50,150
So basically, we have written the code for implementing minimum prior queue, so virtually all parts

250
00:16:50,150 --> 00:16:55,520
of my output should be it, then it should be five, then it should be two, then it should be one,

251
00:16:55,520 --> 00:16:56,610
and then it should be zero.

252
00:16:56,930 --> 00:16:59,600
So basically our output will be in decreasing order.

253
00:17:00,910 --> 00:17:06,339
Why it is in decreasing order, because if you will see the last video, so in the last video, I already

254
00:17:06,339 --> 00:17:09,819
explained to you that the output is coming out to be in decreasing order.

255
00:17:11,099 --> 00:17:17,579
So you can see if we are going to implement the minimum protocol, then basically our output is going

256
00:17:17,579 --> 00:17:19,130
to be sorted in descending order.

257
00:17:20,670 --> 00:17:24,990
There are is going to be in descending order if you want Iraq to be in ascending order.

258
00:17:25,290 --> 00:17:31,890
So you have two options first implemented prior to go and then apply the reverse function, you can

259
00:17:31,890 --> 00:17:32,910
just reverse the error.

260
00:17:33,180 --> 00:17:36,870
And the second way is just write the code for the maximum priority queue.

261
00:17:38,930 --> 00:17:41,280
So this should be my output, eight five two one zero.

262
00:17:41,630 --> 00:17:42,380
So let's see.

263
00:17:53,270 --> 00:17:56,430
So you can see the output is coming out in descending order.

264
00:17:56,780 --> 00:17:58,560
So eight five two one zero.

265
00:17:59,840 --> 00:18:01,390
So our goal is working fine.

266
00:18:02,090 --> 00:18:07,610
Now, again, if you want, we can analyze the time and the space complexity.

267
00:18:07,880 --> 00:18:10,710
So, first of all, the space complexity and this is very simple.

268
00:18:10,790 --> 00:18:13,090
We are just creating very few variables.

269
00:18:13,580 --> 00:18:15,370
So the space complexity is constrained.

270
00:18:15,980 --> 00:18:17,680
If you want to analyze the time complexity.

271
00:18:18,170 --> 00:18:19,640
So let me do that.

272
00:18:21,120 --> 00:18:26,510
So we have to function first inside function and then we have removed minimum function, so we are using

273
00:18:26,510 --> 00:18:27,060
to loop.

274
00:18:27,080 --> 00:18:28,590
So this is the first loop.

275
00:18:28,610 --> 00:18:34,220
So this loop will run and times and this is the insert function called insert at the right place.

276
00:18:34,220 --> 00:18:36,200
And we know insertion takes longer in time.

277
00:18:36,560 --> 00:18:42,730
So this is a login so and login for building the heap and login for building the heap in the input area.

278
00:18:43,250 --> 00:18:46,090
And then we have to call remove minimum function and times.

279
00:18:46,490 --> 00:18:49,970
So I am calling the function and times and each time removal.

280
00:18:50,000 --> 00:18:57,980
So we are doing down here biffy and here we are doing up by so end times and each time login time so

281
00:18:58,220 --> 00:18:58,930
and login.

282
00:18:59,780 --> 00:19:06,870
And if you will add these two to the time complexities and login and the space complexity is very simple.

283
00:19:06,890 --> 00:19:08,370
This is big of one.

284
00:19:09,560 --> 00:19:12,020
So this is the code for the minimum priority queue.

285
00:19:12,970 --> 00:19:15,500
And the output is going to be in descending order.

286
00:19:16,960 --> 00:19:22,510
So if you want to implement maximum protocol, so what changes you have to do?

287
00:19:22,810 --> 00:19:30,080
So first of all, you have to change this code, building the heap so you will just change a few variables.

288
00:19:30,100 --> 00:19:32,350
So, for example, instead of less than you will.

289
00:19:32,350 --> 00:19:33,150
Right, good.

290
00:19:33,190 --> 00:19:39,760
Then then similarly, you have to do minor minor changes in remove function, for example, where you

291
00:19:39,760 --> 00:19:41,020
are writing the condition less.

292
00:19:41,020 --> 00:19:42,640
You will write the conditions there then.

293
00:19:43,150 --> 00:19:48,880
So these are very few minor changes that you have to do for implementing maximum protocol.

294
00:19:49,240 --> 00:19:54,150
And I have confidence in you guys that you can definitely implement, mix and protect yourself.

295
00:19:54,850 --> 00:19:58,710
So if you will implement makes improved, you are getting the time and the space complexity.

296
00:19:58,720 --> 00:20:03,460
So they will be same time is going to be and Logan and the space is going to be big often.

297
00:20:03,460 --> 00:20:06,610
And basically your input array will be started in ascending order.

298
00:20:08,510 --> 00:20:10,030
So I will share this quote with you.

299
00:20:10,880 --> 00:20:12,140
You can analyze this called.

300
00:20:13,340 --> 00:20:15,030
So I will see you in the next one.

301
00:20:15,380 --> 00:20:15,800
Bye bye.

