1
00:00:00,430 --> 00:00:06,960
In this lesson we'll create this send a message dot BHP file which is responsible for validating our

2
00:00:06,960 --> 00:00:15,790
contact form data and transmitting the email using the S.A. IP protocol so start a new document and

3
00:00:15,790 --> 00:00:26,420
save the file as send NSG dot BHP and make sure you save it in your perfect cup directory although we

4
00:00:26,420 --> 00:00:30,230
won't be storing this data into our database.

5
00:00:30,360 --> 00:00:40,680
We're going to start our p p script with a database connection this will come in handy if you ever need

6
00:00:40,680 --> 00:00:45,120
to store the contact form submissions into a database.

7
00:00:45,130 --> 00:00:51,700
This is commonly done for future reference and that way you can track your customers.

8
00:00:51,730 --> 00:01:00,250
Next we'll request the form data using the post method and we've stored the data into three variables

9
00:01:00,280 --> 00:01:02,710
f name email and message.

10
00:01:02,800 --> 00:01:07,270
So this is the data coming from our contact form.

11
00:01:07,270 --> 00:01:12,910
We've used my Eskew Well I real escape string just to prevent any Eskew oil injection.

12
00:01:12,910 --> 00:01:15,870
And so again that adds an additional layer of security.

13
00:01:15,880 --> 00:01:21,270
We also need to create a variable that defines the recipient's email address.

14
00:01:21,370 --> 00:01:25,400
So we're going to store that in a variable called email too.

15
00:01:25,480 --> 00:01:30,720
This is where the form data will submit to.

16
00:01:30,850 --> 00:01:34,270
So you'll receive this email here.

17
00:01:34,450 --> 00:01:36,200
So you're going to plug in your email address.

18
00:01:36,220 --> 00:01:43,060
Next will create a variable that stores the subject line of the contact form so we'll just put test

19
00:01:43,060 --> 00:01:46,810
the message and now we'll validate the form data.

20
00:01:46,810 --> 00:01:50,770
So this is just done in a basic if statement and we've done this quite a few times.

21
00:01:50,800 --> 00:01:57,180
If f name is greater than 50 characters we're going to echo the error code F name long.

22
00:01:57,550 --> 00:02:03,910
If it's less than two characters f name short if the email is more than 50 characters email long if

23
00:02:03,910 --> 00:02:10,190
it's less than two characters emails short if the email is in the incorrect format we have the e format

24
00:02:10,220 --> 00:02:14,270
error code and message long and message short.

25
00:02:14,270 --> 00:02:18,660
If validation passes we have our L statement.

26
00:02:18,680 --> 00:02:23,690
If the validation passes we can proceed to sending the message using p p Mailer.

27
00:02:23,810 --> 00:02:30,530
We start with a require statement that includes an essential file in the p p Mailer directory and that's

28
00:02:30,530 --> 00:02:33,530
called P P Mailer auto load dot BHP.

29
00:02:33,560 --> 00:02:42,380
Next we create a new P P Mailer object and store that in a mail in a variable called mail and this is

30
00:02:42,380 --> 00:02:49,540
the actual email submission code block and I'll just go through it.

31
00:02:50,140 --> 00:02:58,180
So the this line over here sets them the BHP mailer to use the SMP P protocol.

32
00:02:58,180 --> 00:03:03,740
Next we have the host the s empty P host is your outgoing mail provider.

33
00:03:03,790 --> 00:03:15,950
So an example would be G.M. if you're using gmail as your outgoing email provider the SMP host is SMP

34
00:03:15,950 --> 00:03:19,130
PDR gmail dot com.

35
00:03:19,140 --> 00:03:24,840
Now if you're not using Gmail this information would be available through your email service providers

36
00:03:24,840 --> 00:03:30,360
Web site or you can call them depending on who you're using.

37
00:03:30,430 --> 00:03:35,490
Next we specify that our host requires authentication which is almost always the case.

38
00:03:35,560 --> 00:03:43,370
So that's why it's at the true we then set the user name which is your email address and the password

39
00:03:43,370 --> 00:03:45,360
you use for this email account.

40
00:03:45,380 --> 00:03:49,800
I've left it blank but you will need to plug that in.

41
00:03:49,840 --> 00:03:59,390
Next we enable TR less encryption for security purposes Gmail uses pt. 5 8 7 to send emails via SMP.

42
00:03:59,530 --> 00:04:05,020
So again you'll need to check with with your service provider to find out which port they use.

43
00:04:05,020 --> 00:04:14,970
Next we set up our reply to email and so that's stored in our email variable from email is stored in

44
00:04:14,970 --> 00:04:18,510
the email to variable.

45
00:04:18,540 --> 00:04:20,300
This is who the email is from.

46
00:04:20,320 --> 00:04:30,740
And for that we have used f name to the person that filled out the contact form is the one sending the

47
00:04:30,740 --> 00:04:34,730
message.

48
00:04:34,820 --> 00:04:37,340
You can add additional recipients as well.

49
00:04:38,690 --> 00:04:44,180
So here we've just plugged in a demo a demo email you don't have to have additional recipients.

50
00:04:44,180 --> 00:04:44,960
This is optional

51
00:04:47,620 --> 00:04:56,170
this line sets the email to HMO format and that's better for styling purposes over text based emails

52
00:04:58,240 --> 00:05:02,520
than we have the email subject which is stored in the subject variable.

53
00:05:02,780 --> 00:05:10,610
The email content the body content which is stored in the message variable so remember we defined all

54
00:05:10,610 --> 00:05:11,830
these variables up here.

55
00:05:11,840 --> 00:05:20,330
All this data comes from our contact form on the contact page.

56
00:05:20,330 --> 00:05:28,880
Lastly we have an if statement if the email message was not sent for any reason we're going to echo

57
00:05:29,940 --> 00:05:31,970
message could not be sent.

58
00:05:32,220 --> 00:05:39,180
Now the only other alternative to this is that the email was sent in which case we're going to echo

59
00:05:39,180 --> 00:05:42,160
the word true this code.

60
00:05:42,170 --> 00:05:48,140
This access code will then be sent to our contact dot BHP page and interpret it using JavaScript and

61
00:05:48,200 --> 00:05:51,520
Ajax to alert the user of the success.

62
00:05:51,530 --> 00:05:52,010
State

63
00:05:55,210 --> 00:05:57,310
and so that's the entire script there.

64
00:05:58,250 --> 00:06:04,250
So I'm going to refresh the contact got BHP page.

65
00:06:04,390 --> 00:06:08,640
Now I've plugged in our password for this email account.

66
00:06:08,830 --> 00:06:11,020
I'll just fill out the contact form details

67
00:06:18,800 --> 00:06:19,830
and click to submit an

68
00:06:23,450 --> 00:06:25,490
SO HERE WE GET THE SUCCESS message.

69
00:06:25,490 --> 00:06:29,890
Message sent and it should appear in the inbox and there it is.

70
00:06:29,890 --> 00:06:30,610
It's fairly quick

71
00:06:33,910 --> 00:06:37,530
and so that's what the email looks like in the inbox.

72
00:06:37,640 --> 00:06:39,560
You can see the subject text message

73
00:06:42,880 --> 00:06:51,070
and it's from Bob to admin at you excel dot com and then the message body

74
00:06:54,110 --> 00:06:59,310
if we click reply you can see that the reply address is Bob.

75
00:06:59,410 --> 00:07:03,460
Gmail dot com so everything is working the way it should be.
