1
00:00:00,540 --> 00:00:11,070
Hardware and software requirements, now we need an ISP 32 ball and we also need an Arduino board.

2
00:00:11,550 --> 00:00:15,780
These are the hardware requirements and we are going to connect that.

3
00:00:15,780 --> 00:00:18,000
Yes, people with Arduino.

4
00:00:18,000 --> 00:00:26,760
But we also need a, uh, let's say, level shifta, because E.S.P deals with three point three volt

5
00:00:27,120 --> 00:00:29,300
while Arduino deals with Five-fold.

6
00:00:29,550 --> 00:00:36,210
And since we need to connect, there are these two balls, Cyrille, we need a converter and we will

7
00:00:36,210 --> 00:00:39,960
explain that in the circuit design section.

8
00:00:41,370 --> 00:00:44,100
Now, you also need wires.

9
00:00:45,090 --> 00:00:49,440
You are spec able to connect your Arduino ball to your computer.

10
00:00:49,860 --> 00:00:59,610
And I know that you speak able to connect your USB port, your computer, and we will need an amputee

11
00:00:59,850 --> 00:01:01,040
broka account.

12
00:01:01,350 --> 00:01:04,470
I will explain how you can do that.

13
00:01:04,470 --> 00:01:09,920
How can you how you can create an account and what is amputee protocol and why we need it.

14
00:01:10,830 --> 00:01:17,910
We will also need an Arduino Arcudi Development Environment, and I'm going to explain how you can install

15
00:01:17,910 --> 00:01:21,300
it and how you can add the libraries.

16
00:01:21,300 --> 00:01:25,080
We need to implement this project now.

17
00:01:25,080 --> 00:01:29,760
Again, there are five to three point three volt level converter to convert.

18
00:01:29,790 --> 00:01:34,500
The signal level is very important in this project.

19
00:01:34,500 --> 00:01:38,100
Otherwise you might damage your board and.

20
00:01:39,300 --> 00:01:46,280
These are the things that you need to have before moving forward, if you just want to gain knowledge,

21
00:01:46,590 --> 00:01:50,520
you can skip the hardware part and keep watching this course.

22
00:01:50,730 --> 00:01:57,840
But if you want to do this practically, you need to have these two boards and the converter as well.

23
00:01:58,020 --> 00:01:59,300
Thanks for sharing this lesson.

24
00:01:59,730 --> 00:02:00,480
See you next.