1
00:00:01,200 --> 00:00:02,850
Hello and welcome to the stimulus money.

2
00:00:03,900 --> 00:00:12,300
Now it's time to set up the bling app to monitor on values, and the first step will be installing doubling

3
00:00:12,300 --> 00:00:14,530
up on your smartphone.

4
00:00:15,450 --> 00:00:18,380
Now go to your smartphone and go to the App Store.

5
00:00:18,750 --> 00:00:26,070
Depending on the type of smartphone that you have, that might be Google Play store or Apple Play store

6
00:00:26,190 --> 00:00:30,300
or App Store Android playing.

7
00:00:33,610 --> 00:00:37,690
As you can see, you will get it and it's the first result.

8
00:00:38,320 --> 00:00:45,420
This is our uplink and Internet of thing for Arduino E.S.P 32.

9
00:00:46,360 --> 00:00:51,070
Now, as you can see, I already have the app, so I will flick open.

10
00:00:51,310 --> 00:00:55,270
But if you don't have it, you have to click, install or download.

11
00:00:55,900 --> 00:00:58,950
It will wait some time and you will give up.

12
00:00:58,960 --> 00:01:03,430
And as you can see from the description, this app is used to control Arduino.

13
00:01:03,730 --> 00:01:14,480
Raspberry Pi E.S.P is 266 and E.S.P 32 and a lot of other boards is the first and only drag and drop

14
00:01:14,560 --> 00:01:18,940
mobile builder for microcontrollers and Internet of Things.

15
00:01:20,110 --> 00:01:24,910
Click open and as you can see, you have more than one option to log in.

16
00:01:24,910 --> 00:01:30,520
You can log in if you already have an account, you can create new account or you can log in with your

17
00:01:30,520 --> 00:01:31,100
Facebook.

18
00:01:31,960 --> 00:01:42,190
Now you can create an account by clicking here and adding your email and password.

19
00:01:50,820 --> 00:01:57,350
Now, after putting your passport click, create new account, it shouldn't take a lot of time.

20
00:02:00,800 --> 00:02:08,490
Creating a new account will give you a unique authentication code and will be sent to your email.

21
00:02:08,880 --> 00:02:16,380
And this is very important since we are doing this to control our export now.

22
00:02:16,790 --> 00:02:24,110
Now, after creating an account, you need to create a new project and select your hardware.

23
00:02:24,770 --> 00:02:27,200
Now click the new project.

24
00:02:27,980 --> 00:02:30,910
And as you can see, you need to name your project.

25
00:02:31,730 --> 00:02:38,180
I would call it Smart Ghanim, and you need to select your board.

26
00:02:38,660 --> 00:02:44,450
And as you can see, you have a lot of polls that you can choose from.

27
00:02:46,160 --> 00:02:49,160
And the one that we need is the E.S.P.

28
00:02:49,790 --> 00:02:59,360
You have are doing a lot better by other boards we need to speak to to this board and you can choose

29
00:02:59,360 --> 00:03:00,590
that connection type.

30
00:03:03,430 --> 00:03:09,590
As you can see here, we have Wi-Fi connection and you can either choose dark or light.

31
00:03:09,610 --> 00:03:15,770
I would choose light as since it's easier and I then click create a project.

32
00:03:16,970 --> 00:03:19,750
Now, as you can see, authentication.

33
00:03:19,750 --> 00:03:28,110
Tolkien was sent to my email and you can also find it by clicking on this item on the upper right corner.

34
00:03:28,810 --> 00:03:32,350
Click OK, and we will get it from our email.

35
00:03:32,580 --> 00:03:40,060
Now, the authentication code is a very important code that you will use to control your project.

36
00:03:40,810 --> 00:03:46,240
Now we need to create our smart Goldwing monitoring system inside this link up.

37
00:03:47,290 --> 00:03:55,360
Now you have an empty canvas, as you can see, and we need to add four gauge widgets to monitor temperature,

38
00:03:55,360 --> 00:04:04,510
humidity, water level and soil moisture level sensor readings and to do that tap on the canvas to open

39
00:04:04,510 --> 00:04:05,830
up the widget box.

40
00:04:06,460 --> 00:04:09,430
Now you can pick a gauge.

41
00:04:09,820 --> 00:04:15,640
As you can see, we have a lot of gauges and you need to choose one of these.

42
00:04:17,680 --> 00:04:19,540
You can choose any of them.

43
00:04:19,900 --> 00:04:21,910
As you can see here, we have controls.

44
00:04:21,910 --> 00:04:23,560
We don't want these here.

45
00:04:23,560 --> 00:04:30,670
We have displays and we can choose this gauge, the one that's called gauge.

46
00:04:31,540 --> 00:04:39,040
And when you choose it, as you can see, you can control the size of the gauge by dragging and dropping,

47
00:04:39,400 --> 00:04:41,740
using these four points in the corners.

48
00:04:42,640 --> 00:04:47,830
And when you type in the widget, you can change its settings.

49
00:04:48,400 --> 00:04:55,350
So if you click once, you can see that you can change the name size, take size and color of the gauge.

50
00:04:56,020 --> 00:05:06,650
Now you can change the name and you can change the range and you can change the font size and text.

51
00:05:06,670 --> 00:05:08,620
As you can see, we need a larger font size.

52
00:05:09,130 --> 00:05:16,660
We can choose this color, that blue one, and you can choose the refresh interval.

53
00:05:17,320 --> 00:05:22,110
Now, the two most important things are the pain and the frustrate.

54
00:05:22,690 --> 00:05:29,950
You need to set a virtual pen for each gauge with two seconds or three seconds or six seconds of reflash

55
00:05:29,950 --> 00:05:30,330
time.

56
00:05:31,000 --> 00:05:37,240
And since we choose three seconds for the temperature and humidity, as you can see, we don't have

57
00:05:37,240 --> 00:05:38,310
it as an option here.

58
00:05:38,710 --> 00:05:42,700
So we will change it in the code to two seconds and click, OK?

59
00:05:43,210 --> 00:05:45,210
And we will enter the code to match that.

60
00:05:46,210 --> 00:05:53,450
Now, two seconds and the next step is selecting the PIN number.

61
00:05:54,100 --> 00:05:59,350
Now, when you click the PIN number, as you can see, OK, click the pin.

62
00:06:00,220 --> 00:06:06,610
When you click on the pin, you can see that we have V, which is basically a virtual pen and we know

63
00:06:06,610 --> 00:06:11,320
for sure that for our temperature.

64
00:06:13,630 --> 00:06:22,660
And if you will, since we are getting these readings in the cold, if you went back to our cold, you

65
00:06:22,660 --> 00:06:26,860
can see that the temperature is V4.

66
00:06:28,570 --> 00:06:30,250
So change the story for.

67
00:06:32,640 --> 00:06:39,000
And as you can see, you can change the label, but we don't want to do that, and here we have the

68
00:06:39,000 --> 00:06:48,270
range now after changing the refrigerator and the PIN number, you can go back to your canvas and make

69
00:06:48,270 --> 00:06:48,630
it look.

70
00:06:50,760 --> 00:06:56,900
The way you want, so click OK, and as you can see here, we have temperature before and it's in blue.

71
00:06:57,960 --> 00:06:58,560
You can.

72
00:07:01,190 --> 00:07:08,180
Move it anywhere and you can change its size now, I would add the temperature here.

73
00:07:09,330 --> 00:07:12,770
You can't change the size now.

74
00:07:12,790 --> 00:07:14,030
We need another gauge.

75
00:07:16,570 --> 00:07:23,140
For the humility and sense we have for let's minimize this and have them next to each other.

76
00:07:26,350 --> 00:07:28,120
Now, let's move this one.

77
00:07:29,960 --> 00:07:33,980
Up here and this one, let's call it.

78
00:07:36,450 --> 00:07:37,260
Humidity.

79
00:07:39,520 --> 00:07:48,460
And the under are frustrated two seconds make a fonsi as large as they've been, number two V5 since

80
00:07:48,460 --> 00:07:49,660
we have the five.

81
00:07:50,230 --> 00:07:54,280
And as you can see when you click here, you can see that reform is busy.

82
00:07:55,750 --> 00:07:58,270
So we choose the five.

83
00:07:59,710 --> 00:08:01,630
Refaat is busy because we have used it.

84
00:08:02,440 --> 00:08:06,250
Now, as you can see, this is that newgrange from zero to one thousand points three.

85
00:08:06,250 --> 00:08:07,720
We can change that later.

86
00:08:08,050 --> 00:08:14,260
But for now, humidity at V5, just like an hour cold and the refrigerator is two seconds.

87
00:08:14,860 --> 00:08:17,200
Now we need two mortgages.

88
00:08:19,790 --> 00:08:27,770
Let's add our water level gauge and let's add another gauge for the soil moisture.

89
00:08:28,430 --> 00:08:29,840
This one is for water.

90
00:08:32,560 --> 00:08:33,090
Live in.

91
00:08:35,130 --> 00:08:42,120
And we know for sure that the water level is very seven.

92
00:08:49,190 --> 00:08:52,400
OK, so now.

93
00:08:54,550 --> 00:09:04,630
We tried the refresh rate five seconds, then click, it can change the color of the cigarette case

94
00:09:04,630 --> 00:09:06,310
and make it blue.

95
00:09:07,990 --> 00:09:16,000
Now the last one is for the soul and it's the six.

96
00:09:25,370 --> 00:09:32,480
Now, that's changed according to plans and that if to five.

97
00:09:37,060 --> 00:09:37,640
That's it.

98
00:09:38,780 --> 00:09:40,270
Now, listen.

99
00:09:40,390 --> 00:09:40,860
OK.

100
00:09:40,960 --> 00:09:47,530
And make sure that you have everything correctly before V5 for the temperature and humidity, V seven

101
00:09:47,530 --> 00:09:50,650
and V six for the water level and soil moisture.

102
00:09:51,190 --> 00:09:57,770
Now, the next step, we need to add a button widget to control thoroughly.

103
00:09:59,620 --> 00:10:04,260
Now click here, go up and choose button.

104
00:10:05,050 --> 00:10:06,370
And this is our button.

105
00:10:09,070 --> 00:10:18,250
Click once and change the button bin now, as you can see here, you can choose a digital or virtual

106
00:10:18,250 --> 00:10:18,650
button.

107
00:10:19,390 --> 00:10:19,930
Now.

108
00:10:21,480 --> 00:10:26,970
Change the name of the button first and call it necessarily.

109
00:10:30,030 --> 00:10:30,720
Control.

110
00:10:32,760 --> 00:10:39,610
After changing the name, you can change the button tied on the bill that is the general purpose and

111
00:10:39,790 --> 00:10:43,840
outward pain of the E.S.P 32 that is connected.

112
00:10:44,170 --> 00:10:51,150
And we already mentioned that Ali is connected to PIN number twenty two.

113
00:10:51,580 --> 00:10:52,070
Twenty two.

114
00:10:52,980 --> 00:10:55,680
Now we have to send this.

115
00:10:56,080 --> 00:11:02,260
So we have to go to the pin and choose g.P 20 to.

116
00:11:05,220 --> 00:11:13,410
As you can see here now, you can choose either switch or push-Button, I will choose the switch and

117
00:11:14,190 --> 00:11:14,840
that's it.

118
00:11:16,930 --> 00:11:17,280
Now.

119
00:11:17,500 --> 00:11:26,640
OK, now the blink we can change, OK, can change this color now the blink.

120
00:11:26,650 --> 00:11:27,460
Absolutely.

121
00:11:27,770 --> 00:11:36,250
We have four indicators and one button to control the relay and everything is chosen correctly.

122
00:11:36,770 --> 00:11:39,100
That's it for the blink set up.

123
00:11:39,340 --> 00:11:46,420
And the next one, we will take the authentication code and we will insert inside our E.S.P 32 code

124
00:11:46,900 --> 00:11:56,520
and we will add the Wi-Fi and you name and password to our ISP to bar code and we will applaud Dakotah

125
00:11:56,620 --> 00:12:00,460
E.S.P board so that we can start controlling and monitoring this.

126
00:12:01,060 --> 00:12:02,380
As you can see, that is around.

127
00:12:02,380 --> 00:12:09,940
But on the right to side, once you click on it, it will start trying to connect to E.S.P.

128
00:12:09,970 --> 00:12:13,540
And if it is connected online, you will get three things.

129
00:12:14,020 --> 00:12:14,360
Thanks.

130
00:12:14,400 --> 00:12:18,520
Watching this lassonde, this is Asharaf from educational engineering team.