1
00:00:01,670 --> 00:00:08,960
Screwdrivers when it comes to screwdriver the first thing that you need to have is a blade or flat as

2
00:00:08,960 --> 00:00:18,540
you can see in this heads one quarter or three eight inch it's preferable to have a range of fun quarters.

3
00:00:18,650 --> 00:00:25,380
Up to three eighths of an inch and must have at least four inch shaft.

4
00:00:25,400 --> 00:00:34,160
This is the shaft and this is the blade or flat head and you must have a range of them because you might

5
00:00:34,160 --> 00:00:40,070
face different screws and you need to use the right screw with the right head.

6
00:00:41,630 --> 00:00:45,400
It also comes with a plastic or rubber grip as you can see.

7
00:00:45,440 --> 00:00:47,440
These two have lasted grip.

8
00:00:47,900 --> 00:00:56,120
So this is the first crude screwdriver type that you need to have and you also need to have a star or

9
00:00:56,120 --> 00:01:08,280
Phillips and this one must have at least four inch shaft was also a plastic or a grabber hand.

10
00:01:08,330 --> 00:01:17,810
The third thing that you need to have is are precision screwdrivers which are used for smaller screw

11
00:01:17,980 --> 00:01:19,000
drives.

12
00:01:19,010 --> 00:01:21,690
As you can see they have very small heads.

13
00:01:21,830 --> 00:01:29,210
They are mostly used in small bit board or electronic circuits just like the ones available in mobile

14
00:01:29,270 --> 00:01:32,700
application on mobile devices or on laptops.

15
00:01:32,720 --> 00:01:40,730
You need to have this set of screwdriver with a very tiny head and different shapes.

16
00:01:41,210 --> 00:01:49,790
There are always come together in a box and they are very commonly available online.

17
00:01:49,790 --> 00:01:51,730
So you can get them anywhere.

18
00:01:52,780 --> 00:02:00,730
You should also have a set of insulated screwdrivers as you can see the shaft is fully insulated using

19
00:02:00,730 --> 00:02:07,090
rubber or plastic with a blade flat or a Phillips head as you can see.

20
00:02:07,090 --> 00:02:16,620
These are very useful when you are dealing with high current high voltage circuits cause you must avoid

21
00:02:16,980 --> 00:02:25,290
the possibility of you touching the shaft of the screwdriver when trying to assemble or assemble a circuit

22
00:02:25,290 --> 00:02:28,530
while it's working or while its power.

23
00:02:28,650 --> 00:02:37,320
So these screwdriver will come in handy and you will avoid getting shocked by electricity when dealing

24
00:02:37,320 --> 00:02:40,710
with these circuits so have them.

25
00:02:40,770 --> 00:02:47,850
They are very necessary and sometimes in a certain situation you can't avoid dealing with a circuit

26
00:02:47,850 --> 00:02:50,160
while it's spot on.

27
00:02:50,320 --> 00:02:51,670
All right has power.

28
00:02:51,690 --> 00:02:55,170
So you need to be ready for all scenarios.

29
00:02:55,320 --> 00:03:05,400
Again you need to have a flat or a blade screwdriver Phillips or star decision screwdrivers very small

30
00:03:05,400 --> 00:03:13,000
heads and a set of insulated screwdrivers to protect yourself from electric shock.
