1
00:00:00,630 --> 00:00:02,980
Basic component testing.

2
00:00:03,270 --> 00:00:09,900
Now we are going to start with the fuse physical appearance of God and blown fuse.

3
00:00:09,930 --> 00:00:13,040
As you can see this is a good fuse.

4
00:00:13,350 --> 00:00:22,240
This fuse has a slight permed and these two fuses are completely damaged disc.

5
00:00:22,250 --> 00:00:26,670
Color means a major short circuit in the equipment.

6
00:00:26,670 --> 00:00:32,470
As you can see you can't see anything through the glass.

7
00:00:32,610 --> 00:00:39,120
Now there is also a multimeter indication for good and blowing fuse that would fuse.

8
00:00:39,150 --> 00:00:46,110
As you can see here will give you zeros and the blown fuse will give you one.

9
00:00:46,200 --> 00:00:48,260
This is usually done using a fuse.

10
00:00:48,270 --> 00:00:57,870
This and the multimeter itself now in order to test this fuse using a multimeter.

11
00:00:57,870 --> 00:01:06,950
You must use the connectivity or continue at test function rotate your potential meter dial until you

12
00:01:06,950 --> 00:01:08,650
reach the buzzer.

13
00:01:08,720 --> 00:01:17,750
Or can it continue to shape symbol then connect these two terminals to the two terminals of the fuse.

14
00:01:17,750 --> 00:01:23,930
Now if the fuse is working if a conductive path is formed the multimeter will be.

15
00:01:24,140 --> 00:01:28,980
This means that the fuse is working and there is no problem.

16
00:01:29,090 --> 00:01:36,410
Now if the fuse is cut off it's blowing away or if it has a problem.

17
00:01:36,470 --> 00:01:41,280
Once you bless these two terminals the conductive path is broken.

18
00:01:41,480 --> 00:01:49,180
So the multimeter will not beep This is the simplest way to test a fuse using the connectivity test

19
00:01:49,750 --> 00:01:51,710
in your digital multimeter.

20
00:01:52,070 --> 00:01:56,390
And this is carved out in the practical section at the end of this course.

21
00:01:56,620 --> 00:02:03,670
But for now this is how to test a fuse first using the shape if the physical layout wasn't enough.

22
00:02:03,670 --> 00:02:10,570
And if you couldn't figure out if it is blowing or not you can move on to the continued test and see

23
00:02:10,690 --> 00:02:18,100
if your digital multimeter will be or not if it does beep this.

24
00:02:18,110 --> 00:02:21,520
This means that the mole on the fuse is working.

25
00:02:21,520 --> 00:02:25,830
If it didn't beep This means that the fuse is not working.

26
00:02:27,060 --> 00:02:28,820
That's it for how to twist a fuse.

27
00:02:28,860 --> 00:02:31,730
If you have any question please ask and you on a board.

28
00:02:31,830 --> 00:02:32,640
Thanks for watching.

29
00:02:32,640 --> 00:02:35,370
This is Ashraf from educational engineering team.
