1
00:00:01,570 --> 00:00:02,860
Hello and welcome.

2
00:00:02,950 --> 00:00:09,910
In this last one we are going to talk about resisters and how you can identify for this story is in

3
00:00:09,910 --> 00:00:10,620
good shape.

4
00:00:10,630 --> 00:00:18,760
All of this is broken now if it is a good resister the marginal value must be within the range of the

5
00:00:18,770 --> 00:00:27,790
rated value that measured value using an o meter or monthly meter that measure the value using an o

6
00:00:27,790 --> 00:00:35,960
meter or a multimeter is a way to draw mind that is a store value in a circuit.

7
00:00:35,960 --> 00:00:43,670
Another way is using the color band so we can remind the resistance of that is a store using that as

8
00:00:43,670 --> 00:00:48,680
a store color coding as you can see each of these colors

9
00:00:51,340 --> 00:00:52,710
indicate something.

10
00:00:52,720 --> 00:01:01,210
So if the color came in the first digit as you can see for the four band resistor One two three four

11
00:01:01,600 --> 00:01:08,560
or five and resistor each color means something if it Black was the first digit.

12
00:01:09,160 --> 00:01:12,330
This means that the first value is zero.

13
00:01:12,790 --> 00:01:21,070
If Black is the second digit then this means that the second value is zero same for third.

14
00:01:21,100 --> 00:01:24,760
And here we have a multiplier and tolerance.

15
00:01:24,760 --> 00:01:27,850
So let's say that we have this resistor.

16
00:01:27,850 --> 00:01:30,020
Yellow means number four.

17
00:01:30,040 --> 00:01:32,440
So we can write for up here

18
00:01:35,740 --> 00:01:37,130
as you can see here.

19
00:01:37,570 --> 00:01:39,250
The second color is purple.

20
00:01:39,250 --> 00:01:40,330
It has number seven

21
00:01:43,370 --> 00:01:45,830
so we are going to write several here.

22
00:01:45,980 --> 00:01:53,380
The third digit here in this case is is the multiplier in a fourth band color code.

23
00:01:53,420 --> 00:02:00,220
We have two digits and a multiplier and a runs value in five bands.

24
00:02:00,230 --> 00:02:04,230
We have three digits a multiplier and utterance value.

25
00:02:04,250 --> 00:02:07,010
So the third digit is not usable.

26
00:02:07,010 --> 00:02:09,620
Here are the four band code.

27
00:02:09,620 --> 00:02:12,850
So they are going to use the multiplier.

28
00:02:13,250 --> 00:02:24,090
And the orange means 1000 so three zeros and the tolerance is this color which is gold.

29
00:02:24,300 --> 00:02:27,030
And it will be plus or minus 5 percent.

30
00:02:27,060 --> 00:02:39,750
So it will be 74 or 47 kilo because we have three zeros on with a tolerance plus 5 percent now in the

31
00:02:39,750 --> 00:02:42,740
five band we will do the same thing.

32
00:02:42,780 --> 00:02:44,930
The green is number five.

33
00:02:45,090 --> 00:02:51,550
So we write five down here that Brown is number one as you can see here.

34
00:02:51,660 --> 00:02:53,450
So write one down here.

35
00:02:53,640 --> 00:03:01,300
And since it's five band code we will use the third digit which is black and it will be zero.

36
00:03:01,320 --> 00:03:04,720
And the red for the multiplier means 100.

37
00:03:04,770 --> 00:03:06,850
So we will add two zeros.

38
00:03:06,870 --> 00:03:13,940
And here we have a brown which means 1 percent tolerance and you add 1 percent tolerance.

39
00:03:14,010 --> 00:03:17,870
So it will be 51 three zeros.

40
00:03:17,880 --> 00:03:21,700
Means kilo on that's it.

41
00:03:21,700 --> 00:03:26,100
This is how to use color coding to identify that as a store value.

42
00:03:26,140 --> 00:03:32,520
And this is the best way to identify as a store value inside a board without having to remove it.

43
00:03:32,530 --> 00:03:40,510
Now to know if that resistance is working or not you have to measure the color using the color code.

44
00:03:40,510 --> 00:03:50,840
Then you have to break out one of the two legs for that was a store from your board and measure it using

45
00:03:50,990 --> 00:03:52,220
a digital multimeter.

46
00:03:52,580 --> 00:04:00,230
And if these two values match the color coding value and the digital multimeter value if there was a

47
00:04:00,230 --> 00:04:03,930
match between them this means that this was a store is working properly.

48
00:04:04,400 --> 00:04:06,080
And there is no problem in it.

49
00:04:06,620 --> 00:04:16,790
So what you need to know is that you need to find these store values and the color code and you need

50
00:04:16,790 --> 00:04:26,160
to match it with the digital multimeter value if these two are the same means that the resistor is working

51
00:04:26,160 --> 00:04:26,770
just fine.

52
00:04:27,430 --> 00:04:32,780
Otherwise mean that you have a problem and you need to fix that problem.

53
00:04:32,790 --> 00:04:40,580
Now one thing that you need to know is that you can't measure the resistance using as additional multimeter.

54
00:04:40,680 --> 00:04:43,460
Why that is a store is still on board.

55
00:04:43,470 --> 00:04:50,610
So you have to disassemble or disorder one of the two terminals of that resistor so that you can measure

56
00:04:50,610 --> 00:04:57,600
it correctly because sometimes when you measure it while it's still on board you might end up measuring

57
00:04:57,600 --> 00:05:03,510
it with other components connected to it parallel or Syria.

58
00:05:03,510 --> 00:05:12,110
So this will cause a reading error and to avoid this we usually recommend this all during one of these

59
00:05:12,110 --> 00:05:19,880
two terminals and removing them from the board and then you can test it or majority using dual digital

60
00:05:19,880 --> 00:05:21,620
multimeter.

61
00:05:21,620 --> 00:05:30,440
Now in order to cover this in more details these are some examples for a physical appearance of that

62
00:05:30,860 --> 00:05:38,320
effective or defective resistor now as you can see this is how hard it is to lock when it is burned

63
00:05:38,320 --> 00:05:40,540
out completely.

64
00:05:40,540 --> 00:05:45,910
This is a slight burn out but yes you can still recognize the coloring.

65
00:05:45,910 --> 00:05:47,820
Here you can three guys anything.

66
00:05:48,670 --> 00:05:52,550
So if you saw it as this thought that looks like this in a board.

67
00:05:52,570 --> 00:05:57,880
This means that this resistor is broken and you have to replace it.

68
00:05:58,180 --> 00:06:06,190
So in order to measure out of the story using all this that is losing a digital multimeter you might

69
00:06:06,190 --> 00:06:17,320
end up with three results open shorted or change value open meter deflection indicates infinite resistance

70
00:06:17,380 --> 00:06:17,870
reading.

71
00:06:17,920 --> 00:06:21,880
This means that that resistor is broken entirely.

72
00:06:21,880 --> 00:06:29,890
And these two terminals are no longer connected together shorted meter deflection indicates zero resistance

73
00:06:29,890 --> 00:06:30,650
reading.

74
00:06:30,730 --> 00:06:36,850
This means that this resistor is now like our eye are connected and it doesn't have any value.

75
00:06:37,240 --> 00:06:38,760
It's just zero resistance.

76
00:06:38,770 --> 00:06:45,240
So it's like shorting two terminals are positive and negative and connecting them directly together.

77
00:06:45,250 --> 00:06:53,670
Now the third but rarely happen incident is change that is the change in our resistance value.

78
00:06:53,680 --> 00:06:59,670
Rare defect of a resistor measure the value is not within the range of the rated value.

79
00:06:59,680 --> 00:07:06,960
So it is I think you're on with this story might measure it and read five kilo on resistor.

80
00:07:07,030 --> 00:07:09,540
This is not a very common case.

81
00:07:09,670 --> 00:07:14,760
Usually it's either open or shorted but it might happen.

82
00:07:14,830 --> 00:07:16,540
It's very rare but it might happen.

83
00:07:16,540 --> 00:07:24,430
So you need to know that it's there to make sure that before this thing at a distance you d all that

84
00:07:24,430 --> 00:07:31,150
one of these two terminals from the circuit or you can disorder the whole resistance and twisted outside

85
00:07:31,180 --> 00:07:36,220
then put it back or resold it to the board.

86
00:07:36,820 --> 00:07:37,980
That's it for this lesson.

87
00:07:37,990 --> 00:07:42,660
If you have any questions regarding the resistance these ask like you aren't able.

88
00:07:43,120 --> 00:07:43,810
Thanks for watching.

89
00:07:43,810 --> 00:07:46,150
This is Ashley from educational engineering team.
