1
00:00:00,930 --> 00:00:05,250
Hello and welcome to this new last one which I will teach you how to manage our vault.

2
00:00:06,600 --> 00:00:10,750
So in order to measure the voltage you need to know a few things.

3
00:00:10,750 --> 00:00:13,380
First there are two time AC and the DC type.

4
00:00:13,380 --> 00:00:20,640
As we explained earlier this watch will not without AC voltage between two and seven hundred fifty.

5
00:00:20,670 --> 00:00:29,880
As you can see volt plus days you sign here and here it can result from 200 Milli volt up to 1000 revolt

6
00:00:29,910 --> 00:00:35,130
in DC as you can see we have a B plus a dash means DC.

7
00:00:35,160 --> 00:00:38,900
So first you need to make sure that you are uh.

8
00:00:39,420 --> 00:00:42,470
This was just a month without a standoff.

9
00:00:42,510 --> 00:00:50,690
I want to wish our DC voltage for this battery Sam for AC if I want to measure AC for DC.

10
00:00:50,700 --> 00:00:56,370
As you can see I have to go to this range and I know that these batteries around 9 volts.

11
00:00:56,370 --> 00:00:58,410
So I will go with 20 volts.

12
00:00:58,680 --> 00:01:02,550
As you can see here we have it on the 20 boards and in the.

13
00:01:02,640 --> 00:01:07,310
I have to connect the two blocks between com unfold blob.

14
00:01:07,980 --> 00:01:17,220
So the blood the common thread to the Volt they are there on the watch.

15
00:01:17,490 --> 00:01:24,390
And as you can see here we have a positive and the negative that it will go to the positive and the

16
00:01:24,390 --> 00:01:26,180
Black will go to the negative.

17
00:01:26,400 --> 00:01:33,150
As you can see in this unseemly display we have like nine volts and this is the same thing that's a

18
00:01:33,150 --> 00:01:38,730
little light volts DC and this battery is also mindful DC.

19
00:01:39,090 --> 00:01:47,210
Same goes for AC if you want to transfer it to AC if you want to test the AC voltage on your blood or

20
00:01:47,590 --> 00:01:54,700
in your house you will need to go to several hundred fifty here and using the central props polarity

21
00:01:54,760 --> 00:01:55,730
it doesn't matter.

22
00:01:55,890 --> 00:02:01,320
You can apply that block to the right entry to the left or vice versa.

23
00:02:01,470 --> 00:02:05,290
Then turn on the stably and we'll give you the AC reading here.

24
00:02:05,550 --> 00:02:08,080
Same concept applied for both.

25
00:02:08,090 --> 00:02:14,850
Uh as you can see it's very easy to measure the voltage using this watch but you have to make sure not

26
00:02:14,850 --> 00:02:18,030
to order from AC to DC while the power is on.

27
00:02:18,030 --> 00:02:23,970
You will need to turn off then move to DC if you move from AC to DC where the board is on you might

28
00:02:23,970 --> 00:02:25,380
damage your digital multimeter.

29
00:02:25,380 --> 00:02:27,590
So you need to take care of this.

30
00:02:27,630 --> 00:02:30,100
We'll take good care and good.

31
00:02:30,420 --> 00:02:33,780
Uh big questions not to do this.

32
00:02:35,310 --> 00:02:37,250
Uh stay safe.

33
00:02:37,470 --> 00:02:40,160
Try not to touch the props when measuring voters.

34
00:02:40,220 --> 00:02:46,390
So you need to touch the props from this place not from this place because you might harm yourself.

35
00:02:46,410 --> 00:02:48,220
That's it for the measuring voltage.

36
00:02:48,220 --> 00:02:50,430
Listen thanks for watching.

37
00:02:50,430 --> 00:02:51,310
Have a nice day.

38
00:02:51,330 --> 00:02:54,960
If you have any questions please ask asking that you aren't able I'm here to help you.

39
00:02:55,010 --> 00:02:55,360
I believe.
