1
00:00:00,420 --> 00:00:08,250
Hello and welcome to this annual us on which I'll explain to you how to dust out an inductor uh basically

2
00:00:08,260 --> 00:00:10,020
inductor is a coil.

3
00:00:10,080 --> 00:00:12,120
And here we have a Transformer.

4
00:00:12,230 --> 00:00:15,280
It has a Primary coil.

5
00:00:15,360 --> 00:00:22,590
The second recall so we can use these two coils to demonstrate inductor government thing.

6
00:00:22,620 --> 00:00:30,900
So it's really easy to use us need to bring your digital multimeter and apply these tools to the com

7
00:00:30,990 --> 00:00:40,350
and the Volts on the road and her seeding as you can see here the read on the com the red and the Volt

8
00:00:40,390 --> 00:00:44,270
on the old Hertz and the Black is on the cone.

9
00:00:44,340 --> 00:00:57,240
NOW MOVE THIS DIAL to the diode or the um let's say sound Bazar or connectivity uh pattern and make

10
00:00:57,240 --> 00:01:02,750
sure that it's working by simply destroying this as you can see it's working.

11
00:01:02,880 --> 00:01:17,310
Now if you test the binary code it has a very high resistance so it won't display or it won't show connectivity

12
00:01:17,310 --> 00:01:27,780
it will just display that resistance value as you can see we have like a hundred a hundred on resistor

13
00:01:29,760 --> 00:01:30,740
or resistance.

14
00:01:30,950 --> 00:01:31,400
Okay.

15
00:01:33,280 --> 00:01:34,810
One all.

16
00:01:35,300 --> 00:01:38,300
Now the primary distance as you will is it is usually high.

17
00:01:38,420 --> 00:01:42,640
So as you can see here we have one hundred home one hundred on resistor

18
00:01:47,060 --> 00:01:51,110
while the second the resistance is very small very small.

19
00:01:51,110 --> 00:02:00,650
So it's this is because it's taking like 220 volt AC and the biomedical coil and it gives only 6 0 6

20
00:02:00,740 --> 00:02:02,660
volt on the second record.

21
00:02:02,660 --> 00:02:11,600
So this is a center that we have the black wire and we have to blues When we connect these two we will

22
00:02:11,600 --> 00:02:20,750
find half the resistance of the second recall and you can see that using the connectivity test you can

23
00:02:20,750 --> 00:02:27,830
test this out okay media as you can see.

24
00:02:28,430 --> 00:02:31,780
This means that the second the call is working.

25
00:02:31,820 --> 00:02:37,490
Now is this the other one.

26
00:02:37,770 --> 00:02:42,330
Again it's this sound.

27
00:02:42,330 --> 00:02:44,970
This means that this is all connected.

28
00:02:45,450 --> 00:02:51,780
Now most likely when you're just an inductor if it didn't show connectivity or resistance a small resistance

29
00:02:52,080 --> 00:02:57,930
this means that there is a cut in it or there's a problem with that inductor and you have to replace

30
00:02:57,930 --> 00:02:59,020
it.

31
00:02:59,070 --> 00:03:01,350
So there is two types of this for the inductor.

32
00:03:01,380 --> 00:03:03,340
The first one is the connectivity test.

33
00:03:03,480 --> 00:03:06,200
The second one is that a distance test.

34
00:03:06,300 --> 00:03:11,530
So let's test using that as a stance we can match up the resistance.

35
00:03:11,550 --> 00:03:13,460
So this is a sense of type.

36
00:03:13,460 --> 00:03:19,140
So the same resistance must appear on the black and blue on the black on this one.

37
00:03:19,140 --> 00:03:24,480
So the first blue whale will give us that resistance with the black wire which is the very same distance

38
00:03:24,510 --> 00:03:29,100
as between this black white and blue wire here.

39
00:03:29,910 --> 00:03:34,580
So let's test the first resistance OK.

40
00:03:34,590 --> 00:03:36,220
As you can see we have light.

41
00:03:36,210 --> 00:03:42,510
Point eight or point five on the distance on the LCD.

42
00:03:43,170 --> 00:03:49,570
Now we must get our other point five between these two.

43
00:03:49,700 --> 00:03:55,770
Let me just say again point five point four.

44
00:03:55,850 --> 00:04:00,170
So the total distance between the two blue whales will be the sum of these two the distance which is

45
00:04:00,740 --> 00:04:03,620
basically one arm or buoyant clearly

46
00:04:06,690 --> 00:04:09,350
they just fixed this to the table.

47
00:04:10,390 --> 00:04:10,910
OK.

48
00:04:10,920 --> 00:04:13,280
As you can see point eight point seven

49
00:04:16,880 --> 00:04:21,930
and this is the sum of the total distance that we just measure.

50
00:04:22,040 --> 00:04:23,990
This is for the second recall.

51
00:04:23,990 --> 00:04:29,710
It's a very long distance around one arm while the primal core has a very high resistance.

52
00:04:29,750 --> 00:04:43,220
So we put these two this one if you check the LCD you can see that we'll have around 100 ohm OK.

53
00:04:43,240 --> 00:04:51,630
Seventy seven ohm which is like seventy seven times larger than the secondary coil resistance.

54
00:04:51,640 --> 00:04:55,820
So this is how to test the conductance of a coil.

55
00:04:56,050 --> 00:05:03,250
And if it's connected or not if it has a problem or not by testing using the connectivity test here

56
00:05:03,760 --> 00:05:12,160
or using the form test here goes a core it is basically a way of inductor is basically a wire that has

57
00:05:12,160 --> 00:05:17,740
a resistance that you can measure for sure there is other specialized devices for measuring conductance

58
00:05:17,920 --> 00:05:24,310
and it gives you the conductance value not an arm or connectivity gives you the very same conductance

59
00:05:24,310 --> 00:05:31,230
value but we are using this symbol digital multimeter to start out this thing cause buying conductance

60
00:05:31,270 --> 00:05:33,850
digital multimeter would cost you a lot.

61
00:05:34,150 --> 00:05:42,220
So using this symbol device very cheap device you can test conductance using interconnectivity or the

62
00:05:42,340 --> 00:05:48,310
resistance this these other to test you can use to measure conductors if you have any question regarding

63
00:05:48,310 --> 00:05:48,670
this.

64
00:05:48,670 --> 00:05:51,540
You can ask in the currently aboard I'm here to help you.

65
00:05:51,610 --> 00:05:52,660
Thanks for watching.

66
00:05:52,660 --> 00:05:54,970
This is educational engineering team.
