1
00:00:00,300 --> 00:00:05,220
Hello and welcome to this annual us on which I will show you how to test a transistor rather than on

2
00:00:05,220 --> 00:00:07,320
how to defy its terminals.

3
00:00:07,320 --> 00:00:16,650
This is a transistor as you can see here has three tournaments and we will test it out and see if it's

4
00:00:16,650 --> 00:00:20,500
working or not and identify its tournaments.

5
00:00:20,580 --> 00:00:23,960
As I mentioned earlier this is basically a diode.

6
00:00:23,970 --> 00:00:34,320
So you have to choose but I would reading from here on the watch and or on the digital multimeter and

7
00:00:34,320 --> 00:00:41,700
you then you can watch these terminals the black one and the common and the red one on the one that

8
00:00:41,700 --> 00:00:48,490
has become so diluted I am so blessed to turn it on.

9
00:00:48,630 --> 00:00:59,940
Now we said that the first would be to identify the two terminals that want to give a reading when they're

10
00:01:00,350 --> 00:01:01,170
together.

11
00:01:01,200 --> 00:01:07,770
So if we came here as you can see it must concentrate on this.

12
00:01:07,890 --> 00:01:13,090
So the two terminals that won't give any reading both ways will be the collector and emitter.

13
00:01:13,260 --> 00:01:16,420
So let me test these these first two.

14
00:01:16,560 --> 00:01:17,910
So no reading.

15
00:01:18,900 --> 00:01:32,120
Let me OK with me at the outset Tumblr and k now as you can see we have a reading on that unseated slowly

16
00:01:32,140 --> 00:01:33,230
over the digital multimeter.

17
00:01:33,240 --> 00:01:35,520
So these are love the tool collector and the emitter.

18
00:01:36,040 --> 00:01:37,740
Let's move on to the next two.

19
00:01:37,790 --> 00:01:42,090
So this one on this one we have no reading.

20
00:01:42,110 --> 00:01:49,500
And again this one and this one we have no reading on that it is day one means no reading.

21
00:01:49,910 --> 00:01:54,950
So this one and this one are the collector and emitter.

22
00:01:54,950 --> 00:01:58,430
So this one is the base.

23
00:01:58,580 --> 00:01:59,990
This is the first step.

24
00:02:00,290 --> 00:02:01,250
So let's throw

25
00:02:04,000 --> 00:02:05,530
to let's it to you.

26
00:02:06,650 --> 00:02:07,440
OK.

27
00:02:07,490 --> 00:02:10,760
Let me just focus on this area.

28
00:02:11,090 --> 00:02:14,090
So we have the base identified.

29
00:02:14,090 --> 00:02:21,980
Now we need to know if this base is all this land for us is beyond beyond beyond what we need to do

30
00:02:22,390 --> 00:02:31,170
is simply first knowing that the base will give an image element with both collector and emitter.

31
00:02:31,370 --> 00:02:37,010
So if we connected the positive term out of the base and if it gave reading with these two terminals

32
00:02:37,040 --> 00:02:40,070
it means that positive means and beyond.

33
00:02:40,220 --> 00:02:42,310
So it will be an unbeaten transistor.

34
00:02:42,830 --> 00:02:45,400
If it doesn't give a reading we will have to reverse it.

35
00:02:45,410 --> 00:02:50,000
We have to contain the negative been here to the base.

36
00:02:50,180 --> 00:02:56,880
And if it give a reading this means that the base is negative or on which means that this is be unbeatable

37
00:02:56,910 --> 00:02:57,470
in the store.

38
00:02:57,960 --> 00:02:58,850
So of start

39
00:03:01,310 --> 00:03:06,520
this is the most if they're not connected to the base and it's connected to this terminal.

40
00:03:06,680 --> 00:03:09,240
It gave readings and density as you can see here.

41
00:03:09,560 --> 00:03:12,740
If you connect it to the other bend but also give a reading.

42
00:03:13,580 --> 00:03:15,780
So this is the base.

43
00:03:15,920 --> 00:03:17,190
It's connected.

44
00:03:17,190 --> 00:03:18,540
The red blob.

45
00:03:18,590 --> 00:03:22,160
This means that it's and beyond transistor.

46
00:03:22,250 --> 00:03:28,060
So and B on the transistor This is the Times on the.

47
00:03:28,550 --> 00:03:33,860
Now the final step which is I didn't find the collector and emitter between these two bands.

48
00:03:34,070 --> 00:03:39,740
Now as I mentioned earlier that one that will give higher measurement when connected to the base will

49
00:03:39,740 --> 00:03:40,400
be the emitter.

50
00:03:40,580 --> 00:03:45,200
So let's connect the positive terminal to the base.

51
00:03:45,260 --> 00:03:48,170
Let's connect this to the spin.

52
00:03:48,350 --> 00:03:51,820
Gave us six hundred seventy five.

53
00:03:51,860 --> 00:03:57,860
It's going to spin six hundred and eighty nine.

54
00:03:57,860 --> 00:04:04,610
So this one has a higher reading which is that this terminal as I mentioned earlier the one that will

55
00:04:04,610 --> 00:04:07,800
give higher leading with the base will be the emitter.

56
00:04:07,790 --> 00:04:14,190
So now we have this as the emitter and the last one is the correct.

57
00:04:14,270 --> 00:04:16,300
So this is our transistor.

58
00:04:16,370 --> 00:04:17,710
It's fully functional.

59
00:04:18,020 --> 00:04:18,970
It's working.

60
00:04:19,040 --> 00:04:22,970
And we did found out that it's.
