1
00:00:00,480 --> 00:00:10,430
Hello and welcome to its annual lesson in what you are going to start introducing the Fusion 360 for

2
00:00:10,460 --> 00:00:23,560
circuit design the first step is going to open up the Fusion 360 go to the start menu click Fusion 360

3
00:00:24,820 --> 00:00:35,950
or you can simply write it find it as you can see this Fusion 360 you must have an active internet connection

4
00:00:36,490 --> 00:00:37,410
as you can see here.

5
00:00:40,600 --> 00:00:47,080
Since most of the software libraries are online and this is an online based software

6
00:01:04,080 --> 00:01:07,470
now we have the user interface.

7
00:01:07,520 --> 00:01:12,880
This is the design or 3d design user interface.

8
00:01:12,920 --> 00:01:14,720
And this is the grade.

9
00:01:14,750 --> 00:01:17,610
We don't want this interface.

10
00:01:17,630 --> 00:01:21,590
We need that circuit design interface.

11
00:01:21,650 --> 00:01:31,250
So go here to the File menu and choose new electronics design.

12
00:01:31,270 --> 00:01:35,200
Now this is that electronic design user interface

13
00:01:40,670 --> 00:01:49,210
as you can see in this corner we have a new schematic reference to an schematic document that you already

14
00:01:49,220 --> 00:01:55,210
have a new PSP and reference to a PCV document.

15
00:01:55,210 --> 00:01:58,180
Now these references will be used later.

16
00:01:58,180 --> 00:02:06,010
There are basically four designs that you already have either from the software or from other softwares

17
00:02:07,390 --> 00:02:18,780
what we need to do now is simply click this icon to create a new schematic.

18
00:02:18,790 --> 00:02:29,890
Now this is the schematic design area and we are going to explain this all these different boxes then

19
00:02:29,890 --> 00:02:42,560
start working on our circuit design now and then if side here we have the design manager and inside

20
00:02:42,560 --> 00:02:45,920
zone manager we have the sheets.

21
00:02:45,920 --> 00:02:51,950
Basically these sheets as you can see this is sheet number one are different circuit designs you can

22
00:02:51,950 --> 00:02:55,050
add more than one sheet in each circuit design.

23
00:02:55,970 --> 00:03:03,050
Now this is the parts less the electronic parts that we are going to use and these are the items last

24
00:03:04,210 --> 00:03:04,700
here.

25
00:03:04,720 --> 00:03:07,560
You can choose what you want to view.

26
00:03:07,780 --> 00:03:10,000
And here you can filter things

27
00:03:13,460 --> 00:03:13,810
now.

28
00:03:13,840 --> 00:03:17,730
This is the design area the white area in the middle.

29
00:03:17,780 --> 00:03:27,560
And these are the controls for this design area as you can so see undo redo zoom in or out or zoom to

30
00:03:27,560 --> 00:03:28,590
fit.

31
00:03:28,610 --> 00:03:36,240
You can also add the grid settings you can turn the grid on or off.

32
00:03:36,280 --> 00:03:38,720
Now feature return the tone you can click Okay.

33
00:03:38,770 --> 00:03:43,360
And as you can see here we have a grid or you can turn it off.

34
00:03:43,360 --> 00:03:54,600
You can choose to show dots and sort of lines as you can see and you can control the size and the multiplication

35
00:03:55,230 --> 00:04:03,040
in millimeters or inch or metal.

36
00:04:03,050 --> 00:04:05,670
Now this is the grid.

37
00:04:06,080 --> 00:04:12,600
I prefer turning it on with lines called.

38
00:04:12,840 --> 00:04:20,650
Now I think that you need to know is that coordination as you can see as my mouse moves.

39
00:04:20,650 --> 00:04:31,570
We can see here two numbers the x and y coordinates as you can see depending on the origin point now

40
00:04:31,990 --> 00:04:40,630
from this manual sidebar toolbar you can switch to PCV document from the schematic document that we

41
00:04:40,630 --> 00:04:41,040
are.

42
00:04:41,080 --> 00:04:44,740
And here you can see more info about this document.

43
00:04:45,580 --> 00:04:49,120
And you can show or hide different things.

44
00:04:49,120 --> 00:04:53,810
This is the grid control like the one we had here.

45
00:04:54,310 --> 00:04:57,020
And this is the display.

46
00:04:57,340 --> 00:05:00,440
You can choose what you need to be displayed.

47
00:05:01,610 --> 00:05:10,180
Depending on the items that you have here is you want so show the model the pens symbols the names the

48
00:05:10,180 --> 00:05:14,270
values the information all the guides.

49
00:05:14,680 --> 00:05:19,220
You can even add new layer and name it something and give it a color.

50
00:05:19,300 --> 00:05:24,550
As you can see here you can hide layoffs by clicking here.

51
00:05:27,280 --> 00:05:29,400
Owe it to them by double clicking.

52
00:05:29,720 --> 00:05:30,280
I know.

53
00:05:36,010 --> 00:05:44,960
Now you can use this to copy this to paste this to read different items.

54
00:05:44,980 --> 00:05:48,300
This is the ad parts icon.

55
00:05:48,340 --> 00:05:53,080
You can click on it and start adding different elements and parts.

56
00:05:53,080 --> 00:06:04,740
You can jack i dialed DoubleClick and you can add that dialed.

57
00:06:04,810 --> 00:06:06,860
We will talk about that in a minute.

58
00:06:06,870 --> 00:06:07,510
Click Okay

59
00:06:11,750 --> 00:06:12,570
okay.

60
00:06:12,640 --> 00:06:22,380
Now as you can see in the past list we have these diodes and once you click one of these parts let's

61
00:06:22,380 --> 00:06:25,510
say that we have selected this or this.

62
00:06:25,560 --> 00:06:31,790
You can see here and the items the pins for that specific date.

63
00:06:31,800 --> 00:06:41,510
So for day one all day one we have two pins which are items for this part and we are working on cheat

64
00:06:41,520 --> 00:06:53,010
one no if you want to have an item you can simply click here and start holding that item as you can

65
00:06:53,010 --> 00:07:02,820
see you come over to whatever you want if you want to rotate it you can do the same thing by clicking

66
00:07:02,820 --> 00:07:07,210
keys and choosing the item that you want to rotate.

67
00:07:08,080 --> 00:07:09,870
You can't even metal.

68
00:07:10,300 --> 00:07:11,170
This item

69
00:07:13,880 --> 00:07:18,770
now if you want to connect different items together you need to choose Danette.

70
00:07:18,890 --> 00:07:29,640
This icon and simply come to one of the two ends and you'll see a circle once UCSF can you can simply

71
00:07:29,640 --> 00:07:33,600
start drawing and that's it.

72
00:07:33,600 --> 00:07:37,670
This is how you can connect two items together.

73
00:07:38,040 --> 00:07:48,860
You can choose the bin mode from this menu and then that case as you can see I have choose the care

74
00:07:48,950 --> 00:07:50,640
mode and we have a case

75
00:07:53,930 --> 00:07:57,670
you can choose any other mode depending on your needs.

76
00:07:57,710 --> 00:07:58,430
As you can see

77
00:08:02,430 --> 00:08:06,430
and the country will this time the ideas and other stuff.

78
00:08:10,750 --> 00:08:15,240
Now if you want to rename any park let's say that we want to rename this one.

79
00:08:15,400 --> 00:08:19,520
You need to choose the name icon.

80
00:08:19,690 --> 00:08:21,910
Click the item that you want to rename.

81
00:08:22,030 --> 00:08:24,660
Let's name it.

82
00:08:25,420 --> 00:08:26,130
You are Nelson.

83
00:08:26,140 --> 00:08:28,120
As you can see now will have

84
00:08:31,510 --> 00:08:32,860
the new name.

85
00:08:32,940 --> 00:08:34,970
One on.

86
00:08:35,360 --> 00:08:43,460
Now as you can see here you can add a label to a specific item and depending on the type of label that

87
00:08:43,460 --> 00:08:51,810
you wish to add you can simply tiers and add additional information as this label.

88
00:08:51,980 --> 00:09:03,580
So you can add another label to any other item and you can add a name that label by simply choosing

89
00:09:03,610 --> 00:09:10,470
that name icon and click the plus sign and rename it with whatever you want.

90
00:09:13,800 --> 00:09:22,530
Now we have the port icon and this icon.

91
00:09:22,760 --> 00:09:26,570
Now you can use this to add different ports.

92
00:09:26,570 --> 00:09:32,150
And if you clicked here you can add a bus and you can even add a new order

93
00:09:35,550 --> 00:09:42,450
you can easily draw the bus line and start connecting elements.

94
00:09:42,580 --> 00:09:56,040
You can start drawing using the mouse lift button and once you are done you can simply press scape now

95
00:09:56,290 --> 00:10:02,270
the simulate menu from its name it can be used for simulation of electronic circuits.

96
00:10:02,490 --> 00:10:10,170
You can simulate any element all you can show simulation overlay on your schematic.

97
00:10:10,170 --> 00:10:18,450
You can even get a voltage meter or face probe as you can see it has a lot of options can add different

98
00:10:18,540 --> 00:10:26,050
models and you can add digital source or outlook source or simply simulate.

99
00:10:26,050 --> 00:10:29,940
Now since we don't have anything here the simulation won't work.

100
00:10:30,220 --> 00:10:35,460
But we will test it out once we create our circuit.

101
00:10:35,740 --> 00:10:42,940
Now in this modified menu you can change the value or split or slice.

102
00:10:42,970 --> 00:10:51,570
This is more like sure thing to change the layout to change how things look.

103
00:10:52,410 --> 00:10:57,520
So we want to really concentrate on this and this is the select menu.

104
00:10:57,540 --> 00:11:05,460
You can click here and select different items you will give them here this menu and you can choose what

105
00:11:05,460 --> 00:11:08,100
you want to show or to hide

106
00:11:11,110 --> 00:11:19,010
now one last thing that we need to mention is the command line.

107
00:11:19,080 --> 00:11:26,860
As you can see here we have click or press control plus Alt key to activate command line mode.

108
00:11:27,060 --> 00:11:35,680
And if you press control plus all you can start typing commands and you can type anything.

109
00:11:35,680 --> 00:11:40,830
There is a list of commands in the Fusion 360 website.

110
00:11:41,050 --> 00:11:48,740
The minting or what you are doing whether you are adding all deleting an item now front to the left

111
00:11:48,740 --> 00:11:54,080
command we can simply delete and press enter.

112
00:11:54,140 --> 00:11:57,570
As you can see that this command was activated.

113
00:11:57,590 --> 00:12:03,310
You can also choose the copy command and the code command will be activated as well.

114
00:12:04,440 --> 00:12:05,360
That's it.

115
00:12:05,430 --> 00:12:10,740
Now as you can see here we have sheet number one.

116
00:12:10,770 --> 00:12:18,120
And here we have sheet number one two you can choose different items.

117
00:12:18,120 --> 00:12:21,560
Document validate automate or library.

118
00:12:21,630 --> 00:12:23,860
But we want to talk about all of these.

119
00:12:24,030 --> 00:12:27,690
We just concentrated on the user interface.

120
00:12:27,750 --> 00:12:33,280
Now if you have any questions regarding anything and this user interface you can ask it in the queue

121
00:12:33,280 --> 00:12:35,380
on table in the next lesson.

122
00:12:35,490 --> 00:12:43,200
I'm going to teach you how you can add different electronic items and how you can easily import new

123
00:12:43,200 --> 00:12:47,550
libraries for other items that are not available.

124
00:12:47,550 --> 00:12:48,330
Thanks for watching.

125
00:12:48,330 --> 00:12:50,970
This is National from educational engineering team.