1
00:00:00,780 --> 00:00:02,660
Hello and welcome to see you Anderson.

2
00:00:02,690 --> 00:00:13,480
No child going to talk about this or how to create your very own circuit schematic using Fusion 360.

3
00:00:13,660 --> 00:00:20,470
Now this is the circuit design that we are going to create on our Fusion 360.

4
00:00:20,820 --> 00:00:22,940
Let's talk about it a little bit now.

5
00:00:22,980 --> 00:00:32,580
As you can see the main element is our timer 5 five five times and we have four resistors.

6
00:00:32,580 --> 00:00:35,500
We have two LEDs.

7
00:00:35,650 --> 00:00:38,320
We have two capacitors.

8
00:00:38,320 --> 00:00:47,240
As you can see and we have a connector and some powered rails volts plus and ground.

9
00:00:47,270 --> 00:00:48,490
It's a very simple circuit.

10
00:00:49,150 --> 00:00:57,400
And after creating the schematic we are going to create a PCV designed to get to know the Fusion 360.

11
00:00:57,400 --> 00:01:02,480
And how easy it is to create a circuit inside it.

12
00:01:02,490 --> 00:01:07,730
Now let's start by adding for resistors and the time.

13
00:01:08,920 --> 00:01:13,420
Let's go back here and create new electric design

14
00:01:16,410 --> 00:01:19,510
click on that new schematic.

15
00:01:19,520 --> 00:01:21,530
Now we have this area.

16
00:01:21,830 --> 00:01:26,290
Let's enable the grid view.

17
00:01:26,430 --> 00:01:27,540
That's it.

18
00:01:27,550 --> 00:01:37,650
Now let's click on the ad part and from here we can look for the box that we want.

19
00:01:37,670 --> 00:01:42,370
If you couldn't find a pass usually the linear library would be installed.

20
00:01:42,370 --> 00:01:50,850
You have to go to the library manager and look for the linear library here and click use to use it in

21
00:01:50,860 --> 00:01:54,060
your software or new design.

22
00:01:54,070 --> 00:02:03,910
Now since we have it we just need to go to the real library checked the 5 5 5 item and from here we

23
00:02:03,910 --> 00:02:16,720
need this in 5 5 5 and now you can easily add it to your schematic by clicking ones on your left mouse

24
00:02:16,720 --> 00:02:21,490
click then click skip to go back here.

25
00:02:21,620 --> 00:02:24,790
We will also need resistors.

26
00:02:25,040 --> 00:02:37,710
So go back select resistors and from here you can choose any of these resistors now depending on your

27
00:02:37,710 --> 00:02:40,080
design or your PCV design.

28
00:02:40,080 --> 00:02:42,740
You can choose any of these components.

29
00:02:42,840 --> 00:02:47,270
So let me choose this one

30
00:02:50,660 --> 00:02:55,840
as you can see it has an assembly and a PCV schematic.

31
00:02:55,980 --> 00:02:57,380
Flick.

32
00:02:57,820 --> 00:03:08,250
And from here you can rotate by using that i mouse click and we need to add four sisters

33
00:03:18,070 --> 00:03:23,780
then click Skip and cancel now if you didn't like how this is the lock.

34
00:03:23,810 --> 00:03:33,490
You can change it by going out to parts you can even look for other resistors in the library manager

35
00:03:34,490 --> 00:03:34,940
here

36
00:03:38,460 --> 00:03:47,190
as you can see we have heaps elements that we can choose from here we have a release and we have rectify

37
00:03:47,190 --> 00:03:56,950
arms we have resistors more than one library so let's select all of these resistors libraries and use

38
00:03:56,950 --> 00:03:57,220
them

39
00:04:00,740 --> 00:04:05,660
as you can see it's downloading and installing all of these resistor libraries

40
00:04:08,640 --> 00:04:17,040
now they're are available for us to use as you can see here you can simply click and choose any other

41
00:04:17,040 --> 00:04:24,800
type for this or we have potential into we have resistor utterly

42
00:04:28,860 --> 00:04:38,190
and we have different packages for different resistors there is a lot of items it's up to you to choose

43
00:04:38,700 --> 00:04:47,010
whatever works for you now to attack a buster you can simply go and look for the capacitor and from

44
00:04:47,010 --> 00:04:50,520
there you can choose any of these capacitors

45
00:04:54,940 --> 00:05:03,140
as you can see that is a lot of items I will choose one that has three The View because we are going

46
00:05:03,140 --> 00:05:08,420
to create a PCV design and we can change it later.

47
00:05:08,600 --> 00:05:16,800
Now double click on that capacitor and again we already mentioned that not design we need to cover stores

48
00:05:18,320 --> 00:05:27,680
this one and the third is this store will be like that and the other one have to be rotated so let's

49
00:05:27,680 --> 00:05:35,420
go back to our schematic use the right possibly and rotate it all we can simply rotate it using these

50
00:05:35,510 --> 00:05:36,110
icons

51
00:05:39,350 --> 00:05:50,480
OKAY NOW SOME PLACE A here now will also need to LEDs so let's go back.

52
00:05:50,500 --> 00:05:55,020
By pressing scape and let's minimize these.

53
00:05:55,030 --> 00:06:01,400
We already installed the little library so we can use any of these LEDs.

54
00:06:01,750 --> 00:06:03,400
We just need a single led

55
00:06:09,370 --> 00:06:11,260
as you can see it has a lot of options

56
00:06:16,070 --> 00:06:16,790
now.

57
00:06:16,910 --> 00:06:22,870
You can simply inside the lit menu that is under lid click on it.

58
00:06:23,150 --> 00:06:27,340
And from here at I know these you want.

59
00:06:28,090 --> 00:06:28,520
OK.

60
00:06:28,520 --> 00:06:37,150
We will use this one it has a nice physical layout and it looks about right.

61
00:06:37,200 --> 00:06:47,860
The one that we have here now lets this led up here on down here.

62
00:06:47,910 --> 00:06:57,930
Now let's add the two LEDs click add part and go to the lit library inside it you'll find another lit

63
00:06:59,320 --> 00:07:14,480
and from there selected five mm double DoubleClick and add the slit here and down here.

64
00:07:14,690 --> 00:07:17,820
That's it clicks scape

65
00:07:21,400 --> 00:07:23,260
now click cancel.

66
00:07:23,920 --> 00:07:27,850
What we need to do at this point is start connecting elements.

67
00:07:28,090 --> 00:07:35,170
If you are not satisfied with the location of one of these elements you can simply click the move and

68
00:07:35,170 --> 00:07:36,580
move that along.

69
00:07:36,730 --> 00:07:48,630
Wherever you want now to start rooting you need to take and then it's on the icon and start connecting

70
00:07:48,720 --> 00:07:50,710
elements together.

71
00:07:50,710 --> 00:07:57,490
Now we know that these tools as tools are connected and that is the source connected to it according

72
00:07:57,490 --> 00:08:02,700
to our schematic now.

73
00:08:02,790 --> 00:08:06,280
You also know that these pins

74
00:08:09,240 --> 00:08:21,350
PIN number three is connected to and we know that these two are connected together and these two are

75
00:08:21,350 --> 00:08:22,270
connected together.

76
00:08:27,370 --> 00:08:31,940
Now this capacity of IS CONNECTED TO PIN number five

77
00:08:35,100 --> 00:08:38,620
PIN number seven is connected to

78
00:08:41,750 --> 00:08:53,130
now pin number two is connected down here and we have also pin number six

79
00:08:56,420 --> 00:09:06,990
which is connected here now pin number eight is connected to power and.

80
00:09:07,360 --> 00:09:11,410
Adding this a minute but that's it.

81
00:09:11,410 --> 00:09:14,190
These are our main pins.

82
00:09:14,500 --> 00:09:19,580
Click Okay.

83
00:09:19,740 --> 00:09:30,170
Now we need to add the connector and power click add parts go back and look for the connectors.

84
00:09:30,210 --> 00:09:34,680
As you can see here you can choose one of these connectors.

85
00:09:34,710 --> 00:09:36,300
We need to pin connector

86
00:09:41,830 --> 00:09:43,630
Now double click on this.

87
00:09:43,630 --> 00:09:46,070
And the tears.

88
00:09:46,330 --> 00:09:50,470
We also need the power or the supply.

89
00:09:51,430 --> 00:09:58,720
So we don't have a supply library here we can simply add it Go open.

90
00:09:58,720 --> 00:10:06,620
Library Manager and from here look for the supply library.

91
00:10:12,310 --> 00:10:23,740
To now we have supply one on supply to click use then go back where they are.

92
00:10:24,180 --> 00:10:29,350
We can choose the ground from here click Okay.

93
00:10:29,380 --> 00:10:33,740
Now we need to place the ground on these.

94
00:10:33,940 --> 00:10:43,950
We need to place the ground on the ground print here with the right mouse click rotated and placed here.

95
00:10:43,960 --> 00:10:45,430
We also need a ground

96
00:10:48,080 --> 00:10:53,780
this capacitor and we run in the ground for this connector

97
00:10:57,460 --> 00:11:05,050
I'm zooming in and out with my mouse from so it's not a hard task.

98
00:11:05,190 --> 00:11:07,380
And we also need to ground Here's

99
00:11:10,490 --> 00:11:13,490
here to now.

100
00:11:13,560 --> 00:11:17,610
We need the positive for supply.

101
00:11:17,610 --> 00:11:29,220
You can select plus five volt or simply select the plus not reflect and start adding that V Plus

102
00:11:33,750 --> 00:11:44,420
is here and we need one me scared.

103
00:11:45,130 --> 00:11:48,810
Okay now our circuit is ready.

104
00:11:48,900 --> 00:11:55,800
We can proceed connecting elements together choose then a 2D

105
00:12:00,290 --> 00:12:04,770
connect the first element and connect the second one.

106
00:12:04,910 --> 00:12:08,120
That's it now.

107
00:12:08,130 --> 00:12:19,910
This is our circuit and we still have that feed plus which is this pen we need to connect it

108
00:12:24,360 --> 00:12:29,580
let's add three plus through the parts

109
00:12:35,240 --> 00:12:35,900
Kerry.

110
00:12:35,930 --> 00:12:43,130
That's it This is our circuit and you can select.

111
00:12:43,130 --> 00:12:49,330
I think with a selection tool to make sure that it's shown here.

112
00:12:49,360 --> 00:12:56,360
Here we have ground J.B. one and other elements.

113
00:12:56,440 --> 00:12:58,540
So this is our circuit schematic.

114
00:12:58,540 --> 00:13:03,610
We have added resistors capacitors ground and power.

115
00:13:03,760 --> 00:13:06,490
We have added the timer five five five.

116
00:13:07,270 --> 00:13:13,290
And the last step now is changing the elements values.

117
00:13:13,330 --> 00:13:21,940
Now you can zoom in to one of these elements as you can see here and you can see the promoters of that

118
00:13:21,960 --> 00:13:26,050
past this slide bring you here

119
00:13:29,660 --> 00:13:37,870
now to change the element value you need to click on the value icon and click on that element then start

120
00:13:37,870 --> 00:13:39,570
changing these values.

121
00:13:39,610 --> 00:13:42,910
This resistor is 220 cable

122
00:13:47,070 --> 00:14:06,100
and this resistors also 220 K this one is four hundred seventy K and this one is one K

123
00:14:08,910 --> 00:14:11,930
we have also capacitor she is

124
00:14:22,310 --> 00:14:37,130
K as you can see one heel and we have this capacitor we can change it to 10 according to our schematic

125
00:14:39,140 --> 00:14:40,020
that's it.

126
00:14:40,040 --> 00:14:47,540
Now we have changed three or four of the values to store values and that's it.

127
00:14:47,630 --> 00:14:57,980
This is how you can create a schematic diagram and how to connect different elements together now to

128
00:14:57,980 --> 00:15:00,900
make sure that our schematic doesn't have rows.

129
00:15:01,070 --> 00:15:11,390
You can go to the validate menu and from there click the E R C check now as you can see we have one

130
00:15:11,470 --> 00:15:24,320
arrow and fireworks the arrow is that the UN connect import pin on the icy one of now US must be connected

131
00:15:25,040 --> 00:15:33,760
to positive force blah and we have forgotten to connect it so let's go back.

132
00:15:33,810 --> 00:15:42,420
As you can see this is why ELC check is very good because sometimes you might miss something and it

133
00:15:42,420 --> 00:15:45,210
will give you a warning or an error message.

134
00:15:45,390 --> 00:15:50,430
So let's go back and the V Plus

135
00:15:55,020 --> 00:15:55,560
k.

136
00:15:55,580 --> 00:15:57,320
That's it.

137
00:15:57,320 --> 00:16:02,260
Click skip counsel go back to validate click EFC.

138
00:16:02,270 --> 00:16:06,640
Now we don't have any enemies and we have some links.

139
00:16:06,680 --> 00:16:17,250
These are similar to our links if you DoubleClick I know these well names as you can see it will show

140
00:16:17,250 --> 00:16:20,310
you exactly what is the problem

141
00:16:24,590 --> 00:16:32,780
now that it's telling us that there is an overlap and it's no problem and it's hitting us that it doesn't

142
00:16:32,780 --> 00:16:39,000
have a value and it's ok cause it said it doesn't have to have a value.

143
00:16:39,170 --> 00:16:41,420
So sometimes you can ignore these warnings

144
00:16:44,430 --> 00:16:45,220
now.

145
00:16:45,450 --> 00:16:49,140
Again this is our schematic and you can save it

146
00:16:52,820 --> 00:17:00,390
with whatever you want let's call it first 5 5 5 schematic

147
00:17:03,240 --> 00:17:06,510
K in the next lesson.

148
00:17:06,510 --> 00:17:10,860
We are going to create a PCV for this schematic.

149
00:17:10,860 --> 00:17:12,000
So stay tuned.

150
00:17:12,270 --> 00:17:17,460
If you have any question regarding any of these parts that you already mentioned or if you faced any

151
00:17:17,460 --> 00:17:22,370
problems adding any of these elements you can ask in the Hyundai bowl.

152
00:17:22,530 --> 00:17:24,720
This is optional from educational engineering.