1
00:00:10,520 --> 00:00:13,250
Hello, everyone, and welcome to James.

2
00:00:14,160 --> 00:00:21,060
Today, I'll give you a brief demonstration of digitising in Achmat ten point five.

3
00:00:22,170 --> 00:00:30,120
This is a common scenario where you want to admire the great Giants feature, whether it's blind or

4
00:00:30,180 --> 00:00:32,910
polygon from some existing data.

5
00:00:33,660 --> 00:00:41,510
So in this case, I'll be using satellite image Google at the time Samdech toolbar and click on it.

6
00:00:42,420 --> 00:00:46,980
The end, the double box is displayed in this dialog box.

7
00:00:47,790 --> 00:00:48,720
The location.

8
00:00:49,770 --> 00:00:56,050
And I'm using satellite image, so just choose, define and then choose advertising.

9
00:00:56,920 --> 00:01:06,010
So here is the final edit that could be replicated base map, a standard image on a major historical

10
00:01:06,010 --> 00:01:06,370
map.

11
00:01:07,930 --> 00:01:14,200
A blind fit, the original version of the data like this, you do not have anything that you can click

12
00:01:14,200 --> 00:01:18,490
on are attribute to, it's just a picture.

13
00:01:19,560 --> 00:01:26,760
So what we're going to do is that create feature glass four point nine and one million and address the

14
00:01:26,760 --> 00:01:29,090
existing feature on.

15
00:01:29,280 --> 00:01:29,580
Right.

16
00:01:30,060 --> 00:01:37,680
So the first thing that we need to do is that make sure that the editor and this mapping tool box is

17
00:01:37,680 --> 00:01:39,370
added in the app map.

18
00:01:40,170 --> 00:01:42,930
So in this case, it's already been added here.

19
00:01:42,930 --> 00:01:45,840
And you can see they added that in this mapping to.

20
00:01:47,060 --> 00:01:55,040
But if you're Ed and snapping tool box is not displayed, then just click on the gray area, a list

21
00:01:55,040 --> 00:02:02,720
appears from this list you can select the editor and go down and you can have this mapping tool.

22
00:02:02,730 --> 00:02:04,870
Also, just click on it.

23
00:02:04,880 --> 00:02:05,890
It will get open.

24
00:02:05,900 --> 00:02:13,640
You can your that on the snapping in this mapping toolbar is selected.

25
00:02:13,790 --> 00:02:19,520
If it's not, then just go to the Sappington and just click on it and select.

26
00:02:20,460 --> 00:02:28,350
Once you have those 10 feet to class in which we can place new features that we are going to create

27
00:02:29,100 --> 00:02:38,880
at first will create one feature so far that won't look at lock and click on it if that a window gets

28
00:02:38,880 --> 00:02:39,330
open.

29
00:02:40,660 --> 00:02:46,270
And then from here, we need to browse to the location that we want to save feature cloth's.

30
00:02:47,440 --> 00:02:56,010
So, for example, I want to save this feature glass in five folders, so just click on Junior.

31
00:02:56,070 --> 00:03:00,040
Debby's a fly up display from this layout.

32
00:03:00,040 --> 00:03:07,450
Select new fly pops up from this fly up select feature glass.

33
00:03:08,140 --> 00:03:10,930
The new feature glass dialog box is displayed.

34
00:03:12,270 --> 00:03:19,020
In this other box that Greece, in the name of a box and live the United States box blank.

35
00:03:19,890 --> 00:03:26,550
After that, here in the Dibia, you need to specify the type of feature that you want to store in the

36
00:03:26,550 --> 00:03:27,420
future class.

37
00:03:28,510 --> 00:03:37,630
So just click on a dropdown appears from this dropdown, select blind features and then click next.

38
00:03:38,680 --> 00:03:45,670
Now, here, we need to set the court system, so in this case, the court system has already been set.

39
00:03:46,720 --> 00:03:55,570
Market economy system is not set, then select WTS 1984, which is appropriate for this idea, and then

40
00:03:55,570 --> 00:03:56,470
click next.

41
00:03:57,510 --> 00:04:00,990
Give the default x y dollars and then click next.

42
00:04:02,120 --> 00:04:07,730
Now, he also will keep the default configuration kibbutzes and then click next.

43
00:04:09,280 --> 00:04:14,010
And here is when you can add extra tributes for more information.

44
00:04:15,300 --> 00:04:23,490
So just click on the blank area of the filename and type in the filename, and that will be added in

45
00:04:23,490 --> 00:04:31,680
the paper after that click on the very day and select text, which has been said that for.

46
00:04:32,990 --> 00:04:35,630
At the dawn, we have seen properties, Adaiah.

47
00:04:36,720 --> 00:04:42,270
Keep this as default settings, which happens to be fixed with length of the characters.

48
00:04:43,510 --> 00:04:51,310
But if you want to decrease and increase the length, just click on it and then you can type the length

49
00:04:51,310 --> 00:04:52,300
of characters.

50
00:04:53,470 --> 00:05:01,480
So, for example, I want 20 characters typing 20 and then click finished.

51
00:05:02,970 --> 00:05:09,900
The ballot box is closed and the new feature glass has been created and is used for digitizing.

52
00:05:10,900 --> 00:05:15,340
And also defeated has been added to the players in the table of content.

53
00:05:16,910 --> 00:05:20,780
OK, so now we have the ampitheater class portrait's.

54
00:05:22,150 --> 00:05:31,810
Next, go to the ED toolbar and click on the editor of DropZone appears from this dropdown Select Stack

55
00:05:31,840 --> 00:05:32,350
anything.

56
00:05:33,530 --> 00:05:38,390
And that activates many of the features that have been available in this tool by.

57
00:05:40,330 --> 00:05:47,140
One thing that needs to be obvious at first glance is that we need to activate the big feature glass

58
00:05:47,140 --> 00:05:52,570
bin, which is the last icon in the ED to revive here, as you can see.

59
00:05:53,590 --> 00:05:54,610
Just click on it.

60
00:05:55,610 --> 00:05:57,650
They create feature banners displayed.

61
00:05:59,630 --> 00:06:05,930
Notice that she's already been selected in the picture glass and then below we have the construction

62
00:06:05,930 --> 00:06:09,380
doors from here, we can select any of the tools that we want.

63
00:06:10,510 --> 00:06:12,010
So at that point.

64
00:06:13,960 --> 00:06:20,380
Now, in order to change the symbology of the tree watertable of content and just right.

65
00:06:20,380 --> 00:06:21,960
Click on the Dreamliner.

66
00:06:23,460 --> 00:06:31,830
A flyer is displayed from this fly out to Skrappy's option in their broad based dialog box with soursop

67
00:06:31,830 --> 00:06:33,210
chosen is displayed.

68
00:06:35,540 --> 00:06:41,510
Now, just click on symbologist AM in the same area, just click on the point button.

69
00:06:42,780 --> 00:06:46,110
The this that the box is displayed.

70
00:06:47,670 --> 00:06:54,400
Just go down and select this symbol, which will be perfect, I think, for the tree.

71
00:06:55,400 --> 00:07:02,980
So here in the current timber area, you can see the symbol has been applied and then click, OK.

72
00:07:04,180 --> 00:07:06,850
A symbol speculated ballot box is closed.

73
00:07:08,130 --> 00:07:14,170
And then click on apply for an intellectual property standard box and also two of the above.

74
00:07:16,350 --> 00:07:21,510
The dialog box is closed and the same one has been applied here and the table of contents.

75
00:07:22,900 --> 00:07:30,370
With the selected for the deploying, you can notice that it's actually showing where the symbol would

76
00:07:30,370 --> 00:07:31,510
be created.

77
00:07:33,010 --> 00:07:41,050
So if you want to digitize some trees, just zoom in to that area and click that you want to place a

78
00:07:41,050 --> 00:07:41,530
blind.

79
00:07:42,730 --> 00:07:48,040
The point has been created with specified symbols that I have predefined.

80
00:07:49,730 --> 00:07:56,990
Also for having a tribute by digitizing, go to the ED toolbar and click on Add Tributes.

81
00:07:58,710 --> 00:08:05,610
The attribute, Ben, is displayed in this attribute, Ben Knight, Mangou.

82
00:08:09,530 --> 00:08:10,870
And press enter.

83
00:08:12,190 --> 00:08:18,790
So the data has been added in the attribute, then, similarly, we can create more points.

84
00:08:20,210 --> 00:08:28,160
Just click on where you want to place the point and then in the entry, Bootmen, I will not.

85
00:08:32,380 --> 00:08:37,480
And then press enter, so the data has been added in the attribute.

86
00:08:38,630 --> 00:08:40,130
Leaves another blank.

87
00:08:41,210 --> 00:08:44,960
And then in the tribute area, that co-product.

88
00:08:47,760 --> 00:08:49,110
And then press enter.

89
00:08:50,280 --> 00:08:53,930
So the data is also being added and the point is.

90
00:08:55,640 --> 00:09:01,790
And act two, three more points, so just click on the idea of any one to place the blame.

91
00:09:02,330 --> 00:09:08,240
And in the episode, Ben, I mean, and then press enter.

92
00:09:09,560 --> 00:09:15,800
Indianapolis, another point, and then in that area, I, Lanman

93
00:09:18,440 --> 00:09:19,850
and then press enter.

94
00:09:20,930 --> 00:09:26,000
Once we are done with the point, you will go to Ed Goldbart and click on Ed.

95
00:09:26,480 --> 00:09:34,970
A dropdown is displayed from this dropdown select Save edit in order for safety features and the attribute

96
00:09:34,970 --> 00:09:36,230
that has been created.

97
00:09:36,860 --> 00:09:44,570
And if you are done with creating the fine features, then again go to ED Toolbar and click on Ed Adapter.

98
00:09:44,570 --> 00:09:48,170
Mathieu's from this dropdown select stop editing.

99
00:09:48,920 --> 00:09:53,900
So now again we have a new feature class with glaciated entitled.

100
00:09:54,880 --> 00:09:58,570
Remember that this flights that actually infinitely small.

101
00:09:59,020 --> 00:10:06,460
I just talked to someone, if you change a symbol to something else, it would have different size or

102
00:10:06,460 --> 00:10:06,990
whatever.

103
00:10:07,970 --> 00:10:10,160
So, again, we have defined features.

104
00:10:11,420 --> 00:10:20,720
Now in grade class for Length's, so click on Fetlock and then click on Find Your Database of life is

105
00:10:20,720 --> 00:10:23,660
displayed from this playout select new.

106
00:10:24,620 --> 00:10:28,990
Another playout is displayed from this flyer to each class.

107
00:10:30,440 --> 00:10:33,590
The new feature glass, that box is displayed.

108
00:10:35,370 --> 00:10:42,180
In this dialogue, Muxtape wrote in the name Textbooks and leave the Allies textbooks blank.

109
00:10:43,420 --> 00:10:49,960
Next in the tax area, we need to specify the type of feature that we are storing in the future plans.

110
00:10:50,380 --> 00:10:56,560
So just click on a dropdown appears from that dropdown select line features.

111
00:10:57,430 --> 00:10:58,300
Click next.

112
00:10:59,780 --> 00:11:04,250
The coordinates will be same as the pointer features and then click next.

113
00:11:05,920 --> 00:11:09,880
Keep this where tolerance as it is next.

114
00:11:11,590 --> 00:11:17,740
Also, in the configuration key words, it becomes default and they can click next.

115
00:11:19,610 --> 00:11:28,010
Now we have the attributes, I will not add extra data to the attributes, but if you want to add,

116
00:11:28,490 --> 00:11:31,370
you can do that flick finish.

117
00:11:32,470 --> 00:11:38,350
The dialog box is closed and the language it is added to the Laoghaire developed content, as you can

118
00:11:38,350 --> 00:11:40,150
see, the note has been added.

119
00:11:41,360 --> 00:11:45,110
What they think is your database, you can refer to previous video.

120
00:11:46,460 --> 00:11:52,160
So now when I'm creating lines, the main thing that you have to remember I think about is the what

121
00:11:52,160 --> 00:11:55,490
the sampling frequency that is going to be.

122
00:11:56,770 --> 00:12:04,120
In other words, this bus tour and how I'm going to approximate picture of the shape of each of these

123
00:12:04,120 --> 00:12:04,870
objects.

124
00:12:06,000 --> 00:12:14,610
So just go to the editor toolbar and click on Ed, a dropdown appears from this dropdown Select Standing.

125
00:12:15,860 --> 00:12:21,220
The great Japan is displayed, not just that great feature is still here.

126
00:12:22,410 --> 00:12:27,360
But now select group and then in the construction tools, select length's.

127
00:12:28,510 --> 00:12:36,790
That is driving the lines and then just essentially create a vortex, bit disappointed when the line

128
00:12:36,790 --> 00:12:38,370
changes directions.

129
00:12:38,940 --> 00:12:40,930
So go on like this.

130
00:12:41,590 --> 00:12:46,480
And like I said, how many more decks do you want to describe this line?

131
00:12:47,200 --> 00:12:49,320
So here we have got a few of them.

132
00:12:50,530 --> 00:12:57,620
And then in order to add this line segment that you have created, just double click to finish it here.

133
00:12:57,810 --> 00:13:00,550
You can see the line has been created.

134
00:13:01,910 --> 00:13:04,210
So similarly, I'll create another line.

135
00:13:05,440 --> 00:13:15,940
Just zoom into it and start digitizing the so here on this curve, we need to take a little more context

136
00:13:16,570 --> 00:13:18,060
so that it comes properly.

137
00:13:18,520 --> 00:13:19,120
Go on.

138
00:13:20,530 --> 00:13:28,450
And then in order to finish this line just right, click a fly up this display from this flyer just

139
00:13:28,450 --> 00:13:29,340
finished sketch.

140
00:13:30,130 --> 00:13:33,370
So the second line has also been created.

141
00:13:34,860 --> 00:13:41,660
As you can see, the line is not visible properly, so go to table of contents and double click on the

142
00:13:41,670 --> 00:13:49,890
road symbol, the symbol Speculatory ballot box is displayed from here select and you have the same

143
00:13:49,890 --> 00:13:57,960
Malaby one and then change the color to then also increase the size and then just apply.

144
00:13:58,680 --> 00:14:01,050
So here you can see the line has been visible.

145
00:14:02,140 --> 00:14:09,700
Next, if they want to snap the existing line to another line, just double click on the line of Jews,

146
00:14:09,700 --> 00:14:18,310
added word from Ed Bulbar and then drag the vortex to another line yet again.

147
00:14:18,310 --> 00:14:25,570
See, the line has been joined to ensure that in this mapping tool by all this nothing tools are activated.

148
00:14:26,520 --> 00:14:30,610
Suppose if we want to edit Vertex here between this line.

149
00:14:30,760 --> 00:14:36,110
So just click on advertize, zoom in to that area and just click on the link.

150
00:14:36,820 --> 00:14:38,740
So the word that has been created.

151
00:14:39,630 --> 00:14:47,500
After the editing is completed, just right click on the line of fly up is displayed from the flyer

152
00:14:47,640 --> 00:14:49,170
just finished sketch.

153
00:14:50,290 --> 00:14:55,720
Did you want to move anywhere because just click on this line and zoom into the area where you want

154
00:14:55,720 --> 00:15:02,530
to edit people, text Double-Click on the line and then the word that whatever you want to drag the

155
00:15:02,530 --> 00:15:03,150
word that.

156
00:15:04,150 --> 00:15:12,490
And if you want to add more context to this line, then just click on Add to our next toolbar and click

157
00:15:12,490 --> 00:15:13,450
here on the line.

158
00:15:14,520 --> 00:15:19,690
And then directly, right next to the top where the road is passing.

159
00:15:20,700 --> 00:15:21,550
So not here.

160
00:15:21,580 --> 00:15:29,610
The line has been moved to the new location, as you can see just right click a of this display from

161
00:15:29,610 --> 00:15:32,210
this flyer to spin a sketch.

162
00:15:32,730 --> 00:15:35,380
And here you can see it will actually move that line.

163
00:15:36,430 --> 00:15:44,200
Similarly, if you want to delete any vertex, just double click on the line and just delete vertex,

164
00:15:45,100 --> 00:15:47,260
take on the vortex, which you want to believe.

165
00:15:47,680 --> 00:15:52,690
So here you can see the vertex has been deleted and moved to the new location.

166
00:15:53,410 --> 00:16:00,880
Now, in order to finish this sketch, you can click and just finish sketch or just click outside the

167
00:16:00,880 --> 00:16:01,230
line.

168
00:16:01,840 --> 00:16:03,530
So the sketch has been finished.

169
00:16:04,180 --> 00:16:11,620
So from the edit vortex toolbar, they can delete Vertex or all weekend according to the line features.

170
00:16:12,160 --> 00:16:20,220
And this gives you some fine tuning control over the placement of a particular object on the main eye

171
00:16:20,230 --> 00:16:20,800
right now.

172
00:16:20,800 --> 00:16:23,610
Bored with the idea that goes by then click on Ed.

173
00:16:24,250 --> 00:16:27,290
A fly up is displayed from this fly up.

174
00:16:27,310 --> 00:16:31,180
Just say that it's in order to save the line features.

175
00:16:31,870 --> 00:16:37,300
Once claiming that the line is completed, go to the editor and to stop editing.

176
00:16:37,870 --> 00:16:40,690
So here you can see the line has been digitized.

177
00:16:41,440 --> 00:16:45,880
Lastly, we are going to create polygons so far that we need to create a feature.

178
00:16:45,940 --> 00:16:51,970
Let's now go to that map and click on it if that window has been opened.

179
00:16:52,960 --> 00:16:53,230
Right.

180
00:16:53,230 --> 00:16:59,110
Click on the file database and fly up this thing from this flyer to this new.

181
00:16:59,500 --> 00:17:03,290
Another fly up is displayed from this layout.

182
00:17:03,310 --> 00:17:06,040
Just features new features.

183
00:17:06,040 --> 00:17:07,750
Dialog box is displayed.

184
00:17:09,260 --> 00:17:15,920
That's agriculture and food in the name textbooks area and give the airlines textbooks blank.

185
00:17:17,000 --> 00:17:21,290
And then in the Cyberia Polygon feature is already selected.

186
00:17:22,210 --> 00:17:23,530
So just click next.

187
00:17:24,880 --> 00:17:30,880
Now, here, the cabinet will be same as phones and lines again, click next.

188
00:17:32,290 --> 00:17:34,370
Yep, that's my tolerance as it is.

189
00:17:34,390 --> 00:17:35,800
And then again, click next.

190
00:17:36,750 --> 00:17:45,990
Now, in the configuration keywords, Adya, if it does default and click next, now here we can add

191
00:17:45,990 --> 00:17:48,100
extra data to the attribute.

192
00:17:48,300 --> 00:17:49,830
For more information.

193
00:17:50,850 --> 00:17:52,950
But I looked at any data here.

194
00:17:54,090 --> 00:17:56,790
After that, click on Finished Button.

195
00:17:57,960 --> 00:18:04,770
The dialog box is closed in that regard to the has been added in the table of content, and now you

196
00:18:04,770 --> 00:18:08,580
will be able to create agricultural fatalism.

197
00:18:09,810 --> 00:18:19,530
So this might be within each road, if I'm using law to describe the boundary of each of these agricultural

198
00:18:19,540 --> 00:18:19,900
field.

199
00:18:22,250 --> 00:18:31,150
Now go to Ed Goldbart and click on Ed at dropdown appears from this dropdown select started.

200
00:18:32,740 --> 00:18:40,600
And in order to change the symbol of the polygon, click on the agricultural film Polygon Symbol, the

201
00:18:40,600 --> 00:18:43,600
symbol speculator dialog box is displayed.

202
00:18:44,920 --> 00:18:51,840
From this symbol, you can choose any of the symbol that you want and then choose.

203
00:18:51,890 --> 00:18:52,380
OK.

204
00:18:54,200 --> 00:18:59,330
This email speculatory ballot box is closed and the same one has changed.

205
00:19:00,790 --> 00:19:08,050
Now, a great feature, Ben Affleck on agriculture and film and then select Bollywood from construction

206
00:19:08,050 --> 00:19:08,590
tools.

207
00:19:10,160 --> 00:19:13,980
Zoom into it and start creating a polygon.

208
00:19:15,560 --> 00:19:21,800
So, for example, you can do exactly the same when pressing the feature for a nine.

209
00:19:23,000 --> 00:19:25,030
I'm doing the same thing for the Republican.

210
00:19:26,580 --> 00:19:30,030
And also discuss what the sampling frequency would be.

211
00:19:32,140 --> 00:19:34,630
Notice that this is called binding.

212
00:19:36,200 --> 00:19:43,700
It's showing you that you have to finish this polygon, so just click when you come here to the same

213
00:19:43,700 --> 00:19:47,570
place that you have started just above the finish line.

214
00:19:48,470 --> 00:19:51,800
So you can see the polygon has been created.

215
00:19:52,910 --> 00:20:01,490
Now go to Ed Goldbach and choose Ed, a drop gun appears from that drop down, just say that it's.

216
00:20:02,870 --> 00:20:04,970
Next week, the second politician.

217
00:20:06,270 --> 00:20:13,890
If I want to address the existing feature, let's say if I won this boundary of the polygon to exactly

218
00:20:13,890 --> 00:20:20,790
match with the road that is digitised, just a line, then I can do that, Asuman.

219
00:20:22,100 --> 00:20:29,050
So now device the new feature, what a great feature band and select agricultural play.

220
00:20:29,690 --> 00:20:33,200
And then in the construction going select polygon.

221
00:20:34,870 --> 00:20:39,010
After that in the ED Toolbar Selek made by.

222
00:20:40,070 --> 00:20:42,200
It was job done at Pierce.

223
00:20:43,490 --> 00:20:49,150
Notice that if you keep Moss anecdote, it will ask about Études.

224
00:20:50,390 --> 00:20:56,390
But to ensure that that's not being thrown back on this, knapping tools are activated.

225
00:20:57,650 --> 00:21:04,010
In this case, I'll be using Treadstone, this is very handy, so just click on Treadstone.

226
00:21:05,150 --> 00:21:07,610
Now, here, I'm going to read Polygon.

227
00:21:08,860 --> 00:21:09,790
Zoom, do it.

228
00:21:10,920 --> 00:21:16,620
And notice that if you get close to the existing feature, then snap to that feature.

229
00:21:18,370 --> 00:21:27,580
So I'm going to snap my click that you want to start your point from and then drag the car along the

230
00:21:27,820 --> 00:21:29,170
existing feature.

231
00:21:30,510 --> 00:21:32,110
And also, I didn't get highlighted.

232
00:21:34,160 --> 00:21:42,560
So I do not have to try to click on every word, Becs, and try to get them exactly Besim just Trasylol.

233
00:21:43,960 --> 00:21:50,520
When you come to the end, like you do, you want to end this stress, so just click here.

234
00:21:51,880 --> 00:21:59,530
And then Telek Street segment from Ed Bulbar and start digitizing it as before.

235
00:22:01,180 --> 00:22:04,050
So it automatically matches the line segment.

236
00:22:05,430 --> 00:22:06,470
You can see here.

237
00:22:08,380 --> 00:22:09,730
Almost the.

238
00:22:13,110 --> 00:22:16,500
Once you come close to the start point, just right click.

239
00:22:17,650 --> 00:22:26,170
Upload this display from this flyer, then a sketch so he can see the polygon feature has been created

240
00:22:26,740 --> 00:22:31,660
and also continue digitizing the desktop with features in the same.

241
00:22:33,150 --> 00:22:42,720
Now go to the ED Toolbar and click on Ed, a dropdown appears from the Strub down Joe's savings in order

242
00:22:42,720 --> 00:22:44,640
to save this polygons features.

243
00:22:46,220 --> 00:22:52,940
And once we are done with any of the features, so go to Ed Gulabi and click on Ed.

244
00:22:54,150 --> 00:22:59,430
I dropped on that year from that drop down, just stop editing.

245
00:23:01,140 --> 00:23:03,990
So I hear more people, Republican features has been created.

246
00:23:05,310 --> 00:23:11,550
Let's call it a night just simply created and the second polygon I have progressed along the boundary

247
00:23:11,550 --> 00:23:12,200
of the line.

248
00:23:13,560 --> 00:23:18,600
So that's essentially the basic of creating point line and then.

249
00:23:19,750 --> 00:23:26,980
It's not particularly difficult, but in the aftermath, it's not always easy when you look for starting

250
00:23:26,980 --> 00:23:27,190
it.

251
00:23:28,520 --> 00:23:33,860
So remember the open feature, open option, and it'd be a tribute band as well.

252
00:23:34,880 --> 00:23:43,340
Then you can start pressing the just using various construction tools that are available so you can

253
00:23:43,340 --> 00:23:44,380
change the symbols.

254
00:23:45,050 --> 00:23:48,350
So hopefully this is enough to get you started.

255
00:23:49,290 --> 00:23:51,830
That's all I hope you like the radio station.
