1
00:00:03,300 --> 00:00:04,040
Hey guys.

2
00:00:04,100 --> 00:00:10,580
In our last video we were going through setting up user authentication and in this video we will be

3
00:00:10,580 --> 00:00:18,950
looking at setting up rules to her boss to further control who can access what's know there are a few

4
00:00:18,950 --> 00:00:20,530
things that we need to do.

5
00:00:20,540 --> 00:00:27,050
Rules would already be enabled by virtue of the fact that we have individual user accounts and we already

6
00:00:27,050 --> 00:00:34,850
set up the database for user authentication so we just need to have a few more tweaks and we will get

7
00:00:34,850 --> 00:00:42,860
our rules based or our rules separation in fact in our application.

8
00:00:43,100 --> 00:00:43,420
OK.

9
00:00:43,450 --> 00:00:50,270
So we'll start our journey in our style of class and since allows me do I actually upgraded to visual

10
00:00:50,270 --> 00:00:53,250
studio or community addition 2019.

11
00:00:53,420 --> 00:00:56,750
So the interface may look a bit different as I go along.

12
00:00:57,170 --> 00:01:04,980
But essentially it's pretty much the same as you which is what we started this course series in.

13
00:01:05,600 --> 00:01:08,440
So we start with startup.

14
00:01:08,960 --> 00:01:14,410
And once I want to do is actually create a few rules to begin with.

15
00:01:14,420 --> 00:01:22,970
So in the context of our school management system we would probably have an admin a principal and let's

16
00:01:22,970 --> 00:01:26,460
say a user or a teacher.

17
00:01:26,480 --> 00:01:31,430
So we want at least three rules to begin with.

18
00:01:31,430 --> 00:01:39,710
So what I'm going to do is define a function here in the start class that is actually going to go ahead

19
00:01:39,740 --> 00:01:47,000
and create those rules as soon as the application will start so since that's what this class is here

20
00:01:47,000 --> 00:01:47,270
for.

21
00:01:47,300 --> 00:01:56,570
So just go ahead and create a function both creates you roles and users.

22
00:01:56,570 --> 00:02:05,030
And what I'm going to do here firstly is include my application Beebe context to recall that application

23
00:02:05,030 --> 00:02:12,790
VB context would have been defined in our identity model right here and it represents that direct connection

24
00:02:12,950 --> 00:02:20,630
which we call a default connection to our database that is hosing our user beast tables.

25
00:02:20,630 --> 00:02:24,830
So here a default connection is looking right at our database.

26
00:02:24,830 --> 00:02:32,030
So what we want to do is initialize an object of that here because what we want to do is to do a few

27
00:02:32,280 --> 00:02:34,040
database operations.

28
00:02:34,190 --> 00:02:43,270
So we need to include our application B2B context and our father context Zee photo.

29
00:02:43,550 --> 00:02:49,840
And then we see that it's telling us we need to include something so a nice keyboard shortcut is control

30
00:02:49,870 --> 00:02:56,890
and dots and it will show us what moves up and we can skip that and then we see a new application DV

31
00:02:56,960 --> 00:03:05,180
16 or maybe or that var can of the villa or so you could always just see a bar here for context equals

32
00:03:05,270 --> 00:03:08,140
new application DV context.

33
00:03:08,270 --> 00:03:14,480
Next we want to enable to monitors in the form of the role the manager and the user manager.

34
00:03:14,480 --> 00:03:22,730
So I'm just going to initialize an object call it role manager and I'm going to say this is equal to

35
00:03:22,730 --> 00:03:32,390
a new role manager and I can just say control that which will promise me as to what needs to be installs

36
00:03:32,760 --> 00:03:33,320
included.

37
00:03:33,380 --> 00:03:33,760
Sorry.

38
00:03:33,770 --> 00:03:44,230
So I can just press enter and go right ahead and I want this to have identity a role which is going

39
00:03:44,230 --> 00:03:48,780
to require another inclusion so control but once again press enter.

40
00:03:48,790 --> 00:03:55,430
So as you go along you can just go ahead and include all of those libraries that need to be installed.

41
00:03:55,600 --> 00:04:00,130
And this is just a part of the initialization.

42
00:04:00,790 --> 00:04:07,510
So you can just go ahead and type along with me rule store identity rule.

43
00:04:07,660 --> 00:04:19,910
Once again and all of this within the context of context so essentially we are initializing a road monitor

44
00:04:20,690 --> 00:04:30,440
and we're passing in the identity rule and we it's we're initializing a constructor plus in rows store

45
00:04:30,440 --> 00:04:37,430
with identity rule and the value of context here plus in the database that this rule manager should

46
00:04:37,940 --> 00:04:43,870
be initialized within the context of how we do something similar for our user monitor.

47
00:04:43,880 --> 00:04:48,380
So those duplicate that line and just change some of the words.

48
00:04:48,380 --> 00:04:50,570
So this will be user manager.

49
00:04:50,570 --> 00:04:53,450
This is no user manager.

50
00:04:54,080 --> 00:04:59,900
So ultimately has this a similar setup this will be application user.

51
00:04:59,900 --> 00:05:02,870
And this would be user store.

52
00:05:02,870 --> 00:05:11,540
And once again application user and context to me is the saying no we actually need to put it into action.

53
00:05:11,540 --> 00:05:17,500
So what I'm able to do is write an if statement to say that if a rule already exists.

54
00:05:17,600 --> 00:05:22,330
If I rule does not exist then create it.

55
00:05:22,670 --> 00:05:27,460
And well obviously it wouldn't create it if it's already exists.

56
00:05:27,460 --> 00:05:31,200
So I'm actually going to create an admin user initially.

57
00:05:31,430 --> 00:05:44,380
So if and when to say not and the role manager allows me to actually to find or run certain rules specific

58
00:05:44,390 --> 00:05:48,770
operations so I can see rule exists.

59
00:05:48,770 --> 00:05:54,450
And this function will actually go into the rules database and the real stable.

60
00:05:54,560 --> 00:05:54,910
Sorry.

61
00:05:54,920 --> 00:05:59,720
And check if a rule exists by this name.

62
00:05:59,750 --> 00:06:07,100
So clear rule manager we'll see if there is a rule that exists with the name admin.

63
00:06:07,130 --> 00:06:07,570
All right.

64
00:06:07,730 --> 00:06:14,760
But in this case I'm thinking if not I want to see if there is no rule admin then do this.

65
00:06:14,840 --> 00:06:19,110
And what I want to do is create the first rule.

66
00:06:19,190 --> 00:06:29,450
So I'm just going to initialize something of type identity rule and then I'm one to give this role object

67
00:06:29,910 --> 00:06:30,620
a name.

68
00:06:30,620 --> 00:06:33,990
So the idea would be implied once it goes into the database.

69
00:06:34,130 --> 00:06:40,760
But once you give it the name and the name I'm going to give it is admin and then I'm just going to

70
00:06:40,760 --> 00:06:52,810
say room manager go ahead and create this rule so road manager once again has some rural specific operations

71
00:06:53,140 --> 00:06:59,270
that help us to manipulate the rules stables so we don't have to do much work in getting data in and

72
00:06:59,290 --> 00:07:00,880
all of this table.

73
00:07:00,970 --> 00:07:07,270
As with regular table swans it's no use or our rules table as it would have been generated then.

74
00:07:08,230 --> 00:07:14,770
We have certain operations given to us by the framework that helps us to manipulate these tables so

75
00:07:15,100 --> 00:07:17,090
that I have the role.

76
00:07:17,170 --> 00:07:28,410
I'm actually just going to create a user off but application user and I'll do my object initialization

77
00:07:28,470 --> 00:07:32,070
which would then see user name so you could have done that.

78
00:07:32,070 --> 00:07:32,870
Here you go.

79
00:07:32,880 --> 00:07:37,470
Just then the curly braces here and then this field in name equals admin.

80
00:07:37,510 --> 00:07:43,860
So I'm just doing it both ways just in case here in you to see sharp and you want to see how or P works

81
00:07:43,890 --> 00:07:52,340
there certain ways to get there on this so I'll give this user name let's give it admin keep it simple

82
00:07:52,890 --> 00:08:04,580
and the email sorry since to be mean at the bases and then GS to the management for sure com.

83
00:08:04,610 --> 00:08:05,060
All right.

84
00:08:05,640 --> 00:08:10,360
And then what we won't be able to do is actually just set the password directly here.

85
00:08:10,390 --> 00:08:21,510
Lisa I don't want to because I would want to actually see the bar password is equal to and I'll just

86
00:08:21,510 --> 00:08:24,250
say password just to keep it simple.

87
00:08:24,300 --> 00:08:29,790
What do we call that our database is actually going to or at least our functions are actually going

88
00:08:29,790 --> 00:08:34,900
to encrypt this password before it actually gets stored in the database.

89
00:08:34,920 --> 00:08:38,610
So password is equal to this simple word.

90
00:08:38,610 --> 00:08:45,030
I just I'm just doing this so I can actually remember but this is a verified practice going forward.

91
00:08:45,300 --> 00:08:49,130
So then I'll save R Us Ah.

92
00:08:49,590 --> 00:08:56,010
I'm just I'm just creating variables here is equal to and then here's where user manager comes in because

93
00:08:56,130 --> 00:08:58,580
all we want to actually create are users.

94
00:08:58,590 --> 00:09:09,060
So we call on our user manager object and then we see creates we know we can and then we're passing

95
00:09:09,060 --> 00:09:14,820
in and if you look at the function overloads you see or you can create a user with no password.

96
00:09:14,850 --> 00:09:15,370
All right.

97
00:09:15,660 --> 00:09:23,280
You just class in the object of application user or you can actually create a pass or user with a password

98
00:09:23,700 --> 00:09:30,840
and you pass in the user object or the application User object and whatever the password is in string

99
00:09:30,840 --> 00:09:31,230
form.

100
00:09:31,620 --> 00:09:37,050
So this function would actually handle that encryption and insertion into the database.

101
00:09:37,380 --> 00:09:41,530
So this boss in our user object as well.

102
00:09:41,690 --> 00:09:48,820
Or password and then just add a cursory check here to see if or creation.

103
00:09:48,840 --> 00:09:56,760
So anytime you actually create carry out an entity framework action or function usually this function

104
00:09:56,760 --> 00:09:58,830
will return some value.

105
00:09:58,980 --> 00:10:05,940
So the so the so the user objects here are us our objects here will actually have a value so we can

106
00:10:05,940 --> 00:10:09,210
see us are not succeeded.

107
00:10:09,210 --> 00:10:09,510
All right.

108
00:10:09,510 --> 00:10:16,440
So it will return a boolean if it was successful it also returns a list of arrows.

109
00:10:16,470 --> 00:10:22,560
So yes if this is false then you will get a list of errors if this is true then obviously whatever you

110
00:10:22,560 --> 00:10:23,160
try at work.

111
00:10:23,220 --> 00:10:35,770
So if this operation was successful then we can see var results is equal to or use manager.

112
00:10:35,820 --> 00:10:41,290
Once again we want to add a rule.

113
00:10:41,370 --> 00:10:53,500
And after I finish writing this I'll experience user dot I'd be and the rule which is me or let me start

114
00:10:53,500 --> 00:10:54,070
from the top.

115
00:10:54,610 --> 00:11:02,100
So we check firstly if there is a rule called admin in our rules tables.

116
00:11:02,110 --> 00:11:02,400
All right.

117
00:11:02,410 --> 00:11:08,740
So rule manager act is our leads on with our royal stables our DC Does the rule exists.

118
00:11:08,770 --> 00:11:09,740
Yes or no.

119
00:11:09,850 --> 00:11:10,280
No.

120
00:11:10,300 --> 00:11:11,870
If it does not.

121
00:11:11,980 --> 00:11:13,120
Which it wouldn't.

122
00:11:13,120 --> 00:11:19,560
At this stage then we want to firstly create a rule object and then fill it in with the data.

123
00:11:19,570 --> 00:11:25,990
And in this case we want to give it the name admin and then we go ahead and create the rule.

124
00:11:26,020 --> 00:11:28,180
So the rule needs to exist.

125
00:11:28,180 --> 00:11:37,010
Then we go ahead and create an admin user and then we use that admin user password and then we say creates

126
00:11:37,010 --> 00:11:39,260
this user with that password.

127
00:11:39,260 --> 00:11:45,410
So now we would have an admin rule and we have a user called admin.

128
00:11:45,410 --> 00:11:50,590
What we don't have is an association between our user and the rule.

129
00:11:50,660 --> 00:11:56,650
So that is where this line comes in where it is if the user was successfully created.

130
00:11:56,810 --> 00:11:57,070
Right.

131
00:11:57,110 --> 00:12:02,170
And if it got this far then the rule would be successfully created.

132
00:12:02,540 --> 00:12:10,280
If the rules created and the user was created then we want to see if it was successfully created then

133
00:12:10,280 --> 00:12:14,810
we want to add a rule this user.

134
00:12:14,810 --> 00:12:16,570
And that rule.

135
00:12:16,610 --> 00:12:23,220
In other words no we want to create an association between this user idea whatever user I.D. and all

136
00:12:23,220 --> 00:12:24,380
the science of this object.

137
00:12:24,380 --> 00:12:31,680
Because once it's different more for us this operation this object is basically updated with the idea

138
00:12:31,690 --> 00:12:36,890
coming from the database and we have the admin rule.

139
00:12:37,160 --> 00:12:43,800
So this function will actually handle finding all the two ideas and associating them.

140
00:12:43,820 --> 00:12:49,400
Now I think all of this is very important for the admin because admin users are a dime a dozen.

141
00:12:49,430 --> 00:12:52,450
Usually you have one to very few admin users.

142
00:12:52,460 --> 00:12:55,420
You don't go on creating admin users.

143
00:12:55,430 --> 00:13:03,410
However for the principal or the supervisor and the teachers it's not that serious.

144
00:13:03,650 --> 00:13:09,330
So what we can do is simply check if those rules exist.

145
00:13:09,330 --> 00:13:19,290
So I'm just going to see if that's room manager DOT's role exists and this time when to search for the

146
00:13:19,330 --> 00:13:20,540
school teacher.

147
00:13:20,560 --> 00:13:29,060
So if there is no teacher rule then I'm just going to copy this code here and then I'm going to just

148
00:13:29,060 --> 00:13:33,220
paste it there and I'm going to change zero name to teacher.

149
00:13:33,290 --> 00:13:34,160
And there we have it.

150
00:13:34,160 --> 00:13:41,260
So once again on the first run as of writing this code none of these rules exist.

151
00:13:41,300 --> 00:13:46,220
So this will run and create admin and admin user.

152
00:13:46,220 --> 00:13:53,710
This will run and create a teacher rule and I'm just going to put in one more for a supervisor which

153
00:13:53,710 --> 00:13:54,910
is very similar to that.

154
00:13:54,920 --> 00:14:00,200
Again super advisor and supervisor.

155
00:14:00,670 --> 00:14:01,080
All right.

156
00:14:01,240 --> 00:14:06,700
And I'm just going to control a shift and b to build and just ensure I have no errors.

157
00:14:06,700 --> 00:14:06,930
All right.

158
00:14:06,950 --> 00:14:13,790
So we have no errors and know that we've created all of this what we need to do is actually call our

159
00:14:13,790 --> 00:14:21,350
function in our configuration function which runs as soon as the application starts.

160
00:14:21,740 --> 00:14:23,790
So I'm just going to call this function.

161
00:14:23,810 --> 00:14:33,150
I can just copy and paste it this it there and then we can execute and watch that our rules get created.

162
00:14:33,590 --> 00:14:36,760
Okay so we got an error here.

163
00:14:37,100 --> 00:14:43,640
If you are following up to this point in all of the lectures remember that we modified our application

164
00:14:43,640 --> 00:14:49,280
user objects to actually have had dates of birth all right.

165
00:14:49,790 --> 00:15:00,710
So as a result when we're creating this user in our startup sorry it is saying that we have an invalid

166
00:15:00,860 --> 00:15:04,760
beads dates time results.

167
00:15:05,180 --> 00:15:06,730
So we need to fix that.

168
00:15:06,730 --> 00:15:08,870
So I'm just going to stop this real quickly.

169
00:15:08,930 --> 00:15:16,880
And then what we need to do is actually add dates of birth here birth dates equals and other C beads

170
00:15:17,310 --> 00:15:26,320
time gotten all to require me to do a fund that's using the system and then we can try this again.

171
00:15:26,330 --> 00:15:26,620
OK.

172
00:15:26,630 --> 00:15:33,230
So we see that our application came up successfully but I'm not quite interested in what's going on

173
00:15:33,230 --> 00:15:33,490
here.

174
00:15:33,500 --> 00:15:39,350
But quickly out of strand log in as the admin user which should have been created when this was started

175
00:15:39,350 --> 00:15:40,300
up we'll go.

176
00:15:40,310 --> 00:15:44,180
So we're not entirely interested in what is on this screen.

177
00:15:44,180 --> 00:15:50,510
However we want to check our database to see that our rules were created.

178
00:15:50,510 --> 00:15:59,120
So let's go over to survey X for having stopped the debug mode and say so too will data and we want

179
00:15:59,120 --> 00:16:02,560
to see that or three year olds have been created.

180
00:16:03,080 --> 00:16:04,970
And so sad so done.

181
00:16:04,970 --> 00:16:13,190
So we have our three rules admin supervisor teacher and the respective I.D. And if I go to its been

182
00:16:13,190 --> 00:16:20,930
its users and we should see or admin user OK I'm not seeing the in user going to have to check that

183
00:16:21,040 --> 00:16:21,750
out.

184
00:16:21,860 --> 00:16:26,390
I'm not entirely sure why we can get back to that.

185
00:16:26,390 --> 00:16:33,610
So if admin user was not successfully created then that means that association was not going to be there

186
00:16:33,610 --> 00:16:36,750
which would be found in user rules.

187
00:16:36,940 --> 00:16:37,360
Right.

188
00:16:37,390 --> 00:16:39,040
So there is no association.

189
00:16:39,040 --> 00:16:47,670
So at least we have three rules admin supervisor a teacher and we have at least we have two users here.

190
00:16:47,710 --> 00:16:48,190
No.

191
00:16:48,220 --> 00:16:56,380
The thing is if we wanted to associate them at least manually then we just need our user I.D. phone

192
00:16:57,190 --> 00:17:04,030
here in this forum and we just need a real I.D. found in this photo and we could just put them side

193
00:17:04,030 --> 00:17:05,860
by side here manually.

194
00:17:06,250 --> 00:17:13,630
And then we would have an admin user versus a teacher versus if that if that user I.D. appears twice

195
00:17:13,630 --> 00:17:20,870
with two different roles then that user has those rules that have been assigned.

196
00:17:20,890 --> 00:17:27,690
So let's just debug what happened why our admin user was not created.

197
00:17:28,090 --> 00:17:34,990
And I have a strong suspicion if has to do with using a weak password when I want to tweet this quote

198
00:17:34,990 --> 00:17:44,560
a bit and I'm actually just going to tweet this bit here and I'm going to run it before that if statements

199
00:17:44,680 --> 00:17:52,300
just so I can debug what is happening some distance since I debug point here because it seems that parents

200
00:17:52,310 --> 00:18:00,930
of the object successfully and I'm just going to go ahead and press run and see what happens.

201
00:18:00,930 --> 00:18:01,190
All right.

202
00:18:01,210 --> 00:18:08,590
So mid starts up we fix our breakpoint if we look in our user object we see that we have a Roku admin

203
00:18:08,950 --> 00:18:15,420
and the ideas are there and then I can step through using a filter.

204
00:18:15,750 --> 00:18:22,930
We go line by line so I have a password and then we have our function here which would actually create

205
00:18:22,990 --> 00:18:25,120
this user and password.

206
00:18:25,630 --> 00:18:35,710
So I press for them then it will go to the if statements which will then see user creation is successful.

207
00:18:36,460 --> 00:18:37,560
Okay.

208
00:18:38,230 --> 00:18:47,500
So if I press for that again then it should go into the if statement and proceed to associate the user

209
00:18:47,500 --> 00:18:51,120
I.D. for that admin user with the roll.

210
00:18:51,430 --> 00:19:00,120
So I'm not entirely sure why it did not work while it was a part of that statement or its our application

211
00:19:00,120 --> 00:19:04,630
is up this time but I'm just going to stop because I'm not really interested in the application at this

212
00:19:04,630 --> 00:19:05,360
moment.

213
00:19:05,680 --> 00:19:15,540
And I'm going to go to my database and users and see if my eyes deceived me or not.

214
00:19:15,730 --> 00:19:17,500
And there we go.

215
00:19:17,500 --> 00:19:21,160
So our user has been created successfully.

216
00:19:21,520 --> 00:19:28,030
So that means I should be able to log in with this admin user and if we look in user rules and we just

217
00:19:28,030 --> 00:19:29,350
need to refresh.

218
00:19:29,500 --> 00:19:34,540
I already did it but if you're not seeing can industry first query and you'll see that you have that

219
00:19:34,540 --> 00:19:36,850
association user I.D. rule.

220
00:19:37,240 --> 00:19:45,910
I'm not entirely sure why the code didn't run while it was in your statements but the fact is we really

221
00:19:45,910 --> 00:19:52,990
don't want to run again which is why we would have put it inside if statement only happen if there is

222
00:19:52,990 --> 00:19:53,930
no mineral.

223
00:19:54,340 --> 00:20:00,300
So this kind of code you could actually put into an application you're deploying it for the first time.

224
00:20:00,670 --> 00:20:07,150
And these are presets they can put any preset you wish you can create a function create your presets

225
00:20:07,150 --> 00:20:13,170
and just call the function inside this configuration function in the start of class.

226
00:20:13,540 --> 00:20:19,450
Know that we have successfully created some rules and created at least one user in the rule what we

227
00:20:19,450 --> 00:20:27,490
want to do is and this is very very very introductory not best practice that's all but for the sake

228
00:20:27,520 --> 00:20:29,160
of example I do it this way.

229
00:20:29,560 --> 00:20:37,090
What we want to do is actually modify our registration process to include rules.

230
00:20:37,120 --> 00:20:44,160
The first thing I want to do is go to my models and modify the identity model.

231
00:20:44,290 --> 00:20:53,070
So the first thing I want to do is go over to models and modify my account view model and find the or

232
00:20:53,080 --> 00:21:02,580
this model and I want to add here property to accommodate rules all right.

233
00:21:02,980 --> 00:21:10,290
So I'm just going to create another required field you the display name.

234
00:21:10,300 --> 00:21:11,740
User rules.

235
00:21:12,110 --> 00:21:21,760
And this is going to be a string and I want to call it user or you'd also notes that in our database

236
00:21:21,760 --> 00:21:27,020
the e-mail and the user name would get the same thing.

237
00:21:27,070 --> 00:21:32,630
In this case they don't have the same thing what forever previously created one they have the same values.

238
00:21:32,640 --> 00:21:38,770
So what I'm want to do is include user name as a property.

239
00:21:38,980 --> 00:21:44,500
When registering and make sure that we use it user name separately.

240
00:21:44,660 --> 00:21:52,520
I'm just going to put user name and this property user name.

241
00:21:52,670 --> 00:21:53,340
Thanks though.

242
00:21:53,360 --> 00:22:02,060
We want to initialize our combo box for the view for distribution so I'm just going to go into my columns

243
00:22:02,330 --> 00:22:13,120
on trawler and what will be happening in this controller is I want to run our query against my rules

244
00:22:13,120 --> 00:22:20,820
table to see all of the rules in the table and present them as options for distribution.

245
00:22:21,200 --> 00:22:29,110
So the first thing I want to do is actually create a property for application to be 16.

246
00:22:29,110 --> 00:22:33,740
Those remember that just so we will be releasing with our database.

247
00:22:34,040 --> 00:22:39,630
And I'm just going to initialize its having done that.

248
00:22:39,670 --> 00:22:48,220
We want to make sure that when the person user for our site goes through register and we render the

249
00:22:48,220 --> 00:22:54,970
view we're actually rendering the list are combo box with all of their options.

250
00:22:55,000 --> 00:23:01,420
So we just simply call view bug thoughts rules and there are many ways to do this I'm just going to

251
00:23:01,420 --> 00:23:05,790
do it as a view above and call if I select this.

252
00:23:06,430 --> 00:23:12,800
And this would actually go in handy later when we start looking at how we associate files and how would

253
00:23:13,020 --> 00:23:14,410
we have dropped phones.

254
00:23:14,560 --> 00:23:23,200
But in this situation a select list Firstly it takes the data source which would be context about rules

255
00:23:23,410 --> 00:23:32,320
which would do us all rules but best practice would have us create the admin users outside of the box

256
00:23:32,890 --> 00:23:38,740
not a lower user to treat or register and register as I'd been.

257
00:23:38,800 --> 00:23:44,000
So while I'm white I'm not doing it as a best practice by allowing the user to choose their rule.

258
00:23:44,200 --> 00:23:49,970
We can still explore why certain things are just a bad idea also.

259
00:23:50,080 --> 00:23:59,650
So in this situation I would modify my data source and exclude the admin rules so I thought on teens.

260
00:23:59,900 --> 00:24:09,220
So you can see where the name does not come to an app and then that would see exclude to and then we

261
00:24:09,220 --> 00:24:14,270
can just put it to list make those easier.

262
00:24:14,410 --> 00:24:19,780
And there we would have satisfied the very first constructor always see that there are nine of them

263
00:24:19,780 --> 00:24:26,890
and we are able to employ one of the nine that is not this not with a select list you can actually see

264
00:24:27,010 --> 00:24:30,100
when it is selected what value you want.

265
00:24:30,100 --> 00:24:37,810
So I want the value name not the I.T. and also what should be displayed.

266
00:24:37,990 --> 00:24:42,780
And I also want the name to be displayed.

267
00:24:42,880 --> 00:24:50,800
So if you have a word with a combo box and HMO then you know that you always specify the value and you

268
00:24:50,800 --> 00:24:53,410
specify the text to be displayed.

269
00:24:53,410 --> 00:24:59,680
So this is essentially all we're doing is we're looking at this list of objects of type role and we

270
00:24:59,680 --> 00:25:05,170
know that any variable or any object rather of type role has been to name and I.D..

271
00:25:05,530 --> 00:25:13,170
So we're saying we want the name to be the value and we want name to be the displayed value.

272
00:25:13,250 --> 00:25:18,400
Also right now we're doing all of that before we return the view.

273
00:25:18,460 --> 00:25:26,440
Now in the view of this right click this and see Google to view what we want to do is include another

274
00:25:26,710 --> 00:25:31,080
form group section for our newly created combo box.

275
00:25:31,080 --> 00:25:37,810
So in a sense you copy and paste that form group and this would be a label for and we can change that

276
00:25:37,810 --> 00:25:46,150
from confirming passwords to we use a rule for and we also have one for user name.

277
00:25:46,150 --> 00:25:52,720
So just do this twice and probably put user name above e-mail.

278
00:25:52,740 --> 00:25:53,110
All right.

279
00:25:53,130 --> 00:25:54,300
Well let's do one at a time.

280
00:25:54,330 --> 00:25:59,940
So let's do user name and we will see if that value.

281
00:25:59,970 --> 00:26:08,430
So and this would also be a text box for as opposed to a password for a text box for her username.

282
00:26:08,430 --> 00:26:08,810
All right.

283
00:26:09,210 --> 00:26:19,770
And then likewise on here we actually would choose this the user rule for the label but we want our

284
00:26:19,810 --> 00:26:24,790
H2 helper for draw up and down the list.

285
00:26:24,790 --> 00:26:31,890
So it's a drop on the list and then we select our property user rule.

286
00:26:31,900 --> 00:26:41,970
Put that in quotation marks and then we see that we want to use the select list and we are using in

287
00:26:41,970 --> 00:26:44,770
view by its rules.

288
00:26:45,040 --> 00:26:51,300
So we are implicitly converting whatever values instead of view bug URLs into a select list.

289
00:26:51,310 --> 00:26:57,940
And do remember that that is what we set over here a view by the rules is a new select list.

290
00:26:57,940 --> 00:27:05,710
So this implicit conversion should not feel considering that we already put in a select list there and

291
00:27:05,710 --> 00:27:14,900
then we just have one more empty prior window and then that should take care of our distribution page.

292
00:27:15,030 --> 00:27:20,640
And so we've modified the get or disappeared and the actual HMO.

293
00:27:20,650 --> 00:27:24,340
Now we need to modify what happens when we post back.

294
00:27:24,370 --> 00:27:30,190
So when a user actually comes in to be registered there are certain tweaks that need to occur here.

295
00:27:30,330 --> 00:27:37,850
Well firstly we no need to modify our user name object to know that it is no longer taking e-mail what

296
00:27:37,890 --> 00:27:40,960
it is all taking using it because we added that.

297
00:27:41,080 --> 00:27:49,720
And then the next thing we want to do is what's going on is seeing function to see this that's user

298
00:27:49,720 --> 00:27:53,300
manager dot add to rule.

299
00:27:53,320 --> 00:27:59,590
So now we're actually going to associate this user with a rule and we would remember from the previous

300
00:27:59,590 --> 00:28:09,820
activity that what we want is our user I.D. So user but I.D. and our rule by name which we would get

301
00:28:09,820 --> 00:28:13,550
through model dot user rule.

302
00:28:13,550 --> 00:28:13,860
All right.

303
00:28:14,320 --> 00:28:17,800
So have a little fun here.

304
00:28:17,860 --> 00:28:18,760
Oh I'm sorry.

305
00:28:19,480 --> 00:28:24,200
I'm using a waits here so whatever I'm using it has to be a sync.

306
00:28:24,580 --> 00:28:26,970
So wait a seen.

307
00:28:27,160 --> 00:28:27,940
And there you go.

308
00:28:28,030 --> 00:28:35,590
So each user manager and we are passing the user I.D. because the user would have been created from

309
00:28:35,860 --> 00:28:37,680
this function call.

310
00:28:37,900 --> 00:28:42,950
And if it was successful then we would automatically sign in.

311
00:28:43,120 --> 00:28:49,450
And I mean you could always treat this you could always move this signing function after the creation

312
00:28:49,480 --> 00:28:57,390
and the Association of the user with the role and then you could rewrote to the page.

313
00:28:57,430 --> 00:29:07,480
And similarly if we have to render an error then what we would want to do is reload or select this because

314
00:29:07,480 --> 00:29:13,810
when the page reloads with our arrows we add ons an empty combo box for the user to have to sit down

315
00:29:13,810 --> 00:29:16,390
and figure out how do I get something back.

316
00:29:16,390 --> 00:29:24,520
So we want to reload our view bug with this list such that when it returns this view it knows exactly

317
00:29:24,670 --> 00:29:26,920
what data needs to go back in.

318
00:29:27,220 --> 00:29:33,380
And so we can test this and ensure that our application works just fine.

319
00:29:33,380 --> 00:29:40,080
No our application is up let's try and register a brand new user and see what the experience is like.

320
00:29:40,090 --> 00:29:40,540
All right.

321
00:29:40,540 --> 00:29:48,250
So now we see that we have user name and we have user roll with a dropdown stuff for seafood makes good

322
00:29:48,370 --> 00:29:54,760
style this way using Bootstrap to make it look like I've dropped on that fits in with others.

323
00:29:54,760 --> 00:29:56,830
But let's go ahead right now.

324
00:29:56,860 --> 00:30:03,780
Some would just say test teacher or let's say teacher Y and the e mail address and the C I said e-mail

325
00:30:03,780 --> 00:30:04,140
this.

326
00:30:04,140 --> 00:30:04,810
That's user name.

327
00:30:04,820 --> 00:30:07,180
So we need to modify our model.

328
00:30:07,180 --> 00:30:09,550
So you take all of that slash user name.

329
00:30:09,600 --> 00:30:09,970
All right.

330
00:30:10,000 --> 00:30:14,450
So e-mail address would be teacher at school.

331
00:30:14,500 --> 00:30:15,700
Date of birth.

332
00:30:15,750 --> 00:30:17,540
Just deal with that that password.

333
00:30:17,540 --> 00:30:22,990
I'll use this in Professor again and then user will you notice that this is a blank over when I click

334
00:30:22,990 --> 00:30:31,330
you'll see that it actually has values excluding admin based on the query that we wrote to fill this

335
00:30:31,330 --> 00:30:32,870
combo box.

336
00:30:32,920 --> 00:30:40,570
The reason there is a blank space here is that in our code we did have a blank space in our each demo

337
00:30:40,840 --> 00:30:42,650
in the form of this.

338
00:30:42,700 --> 00:30:42,990
All right.

339
00:30:43,000 --> 00:30:47,360
So that's what that would give us a blank space as a first on default.

340
00:30:47,620 --> 00:30:54,500
So we can go back and these our decision by selecting our role as a teacher and then at the register.

341
00:30:54,550 --> 00:30:55,310
And there we go.

342
00:30:55,310 --> 00:31:02,590
So I'm just going to say but using the or combination for a teacher 1 and if I click manage or click

343
00:31:02,650 --> 00:31:09,880
on the user name you see that you actually have some auto generated functions for the user here.

344
00:31:09,940 --> 00:31:16,930
I won't get into that to be but we can definitely tell that our teacher has been created and I'm just

345
00:31:16,930 --> 00:31:24,580
going to come also people more quickly and we people with the database and see what role this teacher

346
00:31:24,610 --> 00:31:25,630
has been assigned.

347
00:31:25,630 --> 00:31:33,360
So if I refresh the user's table then you'll see teacher coming up so we have a teacher at school come

348
00:31:33,430 --> 00:31:39,010
with the email and we see that the card user name is coming across based on the changes that we have

349
00:31:39,010 --> 00:31:39,700
made.

350
00:31:39,790 --> 00:31:44,890
And if I go to the user and rules that we should see a second rule here.

351
00:31:44,890 --> 00:31:50,580
Coming up with the teacher's I.D. and the teachers are all I.T. and there we go.

352
00:31:50,590 --> 00:31:57,700
So we have the teachers I.D. And we have the teacher rule I.D. and that is essentially how you go about

353
00:31:57,820 --> 00:31:59,800
creating rules.

354
00:31:59,810 --> 00:32:07,690
Now the last thing I want to cover in this video is how you can go about authorizing a controller based

355
00:32:07,810 --> 00:32:09,290
on the rule.

356
00:32:09,340 --> 00:32:16,100
So we have discussed using author as to say that you are unable to access certain things control or

357
00:32:16,110 --> 00:32:21,150
are the entire controller if you are not logged in.

358
00:32:21,450 --> 00:32:26,140
Know what we want to do is see if you're not logged in on a particular rule.

359
00:32:26,470 --> 00:32:33,030
Then you are restricted from accessing these things.

360
00:32:33,090 --> 00:32:39,220
Now let's say for instance we already have admin who already have teacher teachers usually are the ones

361
00:32:39,220 --> 00:32:42,130
who should be looking at the students and their details.

362
00:32:42,130 --> 00:32:49,710
The admin might be the I.T. guy so admin might not necessarily be able to access all of this and that

363
00:32:49,720 --> 00:32:54,730
that may be a far fetched scenario offensive that admin should be able to do of but just humor me for

364
00:32:54,730 --> 00:33:01,870
this scenario and let's just see that anything inside of the students bunch Schroeder should only be

365
00:33:02,080 --> 00:33:07,170
accessible to people who are in the teacher role.

366
00:33:07,360 --> 00:33:13,720
So on the authorize attributes that is already here on our students controller I'm just going to put

367
00:33:14,040 --> 00:33:21,420
an open and close parentheses and then I'm going to see rules and then you see the intent of census

368
00:33:21,420 --> 00:33:29,650
seeing rows equal and then what's is expecting is a string with the rules that should be able to access

369
00:33:29,820 --> 00:33:37,450
though you can actually have multiple rules here so you can see a teacher comma admin comma as many

370
00:33:37,540 --> 00:33:38,540
as you need.

371
00:33:38,590 --> 00:33:43,370
All right in this case because we only have two users in either.

372
00:33:43,570 --> 00:33:48,560
I'm just going to demonstrate with teacher versus admin so let's go through this again.

373
00:33:48,580 --> 00:33:54,760
A teacher is authorized to access everything instead of this students control.

374
00:33:54,790 --> 00:34:01,060
We already load anonymous on index so that means an admin are not logged in person should be able to

375
00:34:01,060 --> 00:34:02,290
access index.

376
00:34:02,290 --> 00:34:09,640
However if anybody who is not in the teacher role logged in or otherwise attempts to go to details or

377
00:34:09,640 --> 00:34:16,330
create or anything else inside this bunch folder then they should feel no let us test them know that

378
00:34:16,330 --> 00:34:18,310
the application is OK.

379
00:34:18,370 --> 00:34:26,230
I have realized that there is a bug where if you are in debug mode and you're already logged in.

380
00:34:26,230 --> 00:34:33,550
Then when you try to do this operation it will prompt you to log in as though the author as attributes

381
00:34:33,610 --> 00:34:34,500
is not working.

382
00:34:34,510 --> 00:34:40,780
So to make sure that you get the most out of this this I recommend that you log off and you trying to

383
00:34:40,780 --> 00:34:46,480
log in again so I logged off and log in and just show you some changes that I made to the logging process

384
00:34:46,480 --> 00:34:51,110
where I changed the log in from email to username.

385
00:34:51,190 --> 00:34:58,990
Usually we ask people to log in with username and password and in the same vein in the code I actually

386
00:34:58,990 --> 00:35:00,700
updated the sign in managers.

387
00:35:00,730 --> 00:35:07,880
So this is in a column controller and this is a post logging phone function change signing the Monitor

388
00:35:07,880 --> 00:35:16,360
that password signing async to be module dots user name so I updated the log and model of user name

389
00:35:16,450 --> 00:35:23,910
instead of e-mail and the signing function actually takes the user name and password.

390
00:35:23,940 --> 00:35:31,120
So because we're using email as the user name up until know because we added user name as a field in

391
00:35:31,120 --> 00:35:36,370
our registration process we want to make sure that we're sending and with user name and password which

392
00:35:36,370 --> 00:35:39,280
means that all the two users would need to be updated.

393
00:35:39,360 --> 00:35:40,320
User names.

394
00:35:40,340 --> 00:35:45,250
That's not the email address any of those are some changes that I've made so you can go ahead and make

395
00:35:45,250 --> 00:35:46,390
those changes.

396
00:35:46,550 --> 00:35:52,420
But as it relates to also logging in this logging quickly as a teacher and then demonstrate that the

397
00:35:52,420 --> 00:36:00,260
teacher can go to all students which allows anonymous but can also go ahead and go to its details delete

398
00:36:00,380 --> 00:36:05,890
or creates and I'm just middle clicking to open these open new tubs so I can show you that each page

399
00:36:05,890 --> 00:36:12,550
loads as we would expect since this person is in the cart to roll.

400
00:36:12,670 --> 00:36:21,230
No what I'm want to do is sign up teacher and then log in as the admin user and no girls to students.

401
00:36:21,280 --> 00:36:22,440
Which will allow me.

402
00:36:22,510 --> 00:36:29,830
But then when I click on Create new it will prompt me to log in because my admin rule is not allowed

403
00:36:29,830 --> 00:36:32,140
to access this page.

404
00:36:32,290 --> 00:36:39,100
And so the person is love in what they're being prompted to log in again because they're not authorized.

405
00:36:39,250 --> 00:36:46,120
So that is essentially how you can global using rules to control access to different parts of your application

406
00:36:46,660 --> 00:36:53,680
and how you go boating in installing rules and customizing them to your purpose.

407
00:36:53,680 --> 00:36:58,930
All of this is extensible because different people have different requirements but this is pretty much

408
00:36:58,930 --> 00:37:07,050
although the box with minimal code you can leverage Microsoft's existing rules management system.

409
00:37:07,060 --> 00:37:09,650
Thanks for watching and see you next time.
