1
00:00:00,910 --> 00:00:07,270
Hello and welcome to this annual lesson in which we are going to discuss main components of any floor

2
00:00:07,270 --> 00:00:10,590
charting now.

3
00:00:10,820 --> 00:00:16,310
As you can see we are drawing a floor chart you are using symbols.

4
00:00:16,310 --> 00:00:22,640
These are symbols that are widely known among programmers.

5
00:00:22,760 --> 00:00:29,430
So they are like stand ups and you have to know what each of these symbols mean.

6
00:00:29,450 --> 00:00:40,240
List south by this symbol this symbol is a floor line as you can see it's an arrow that has a direction

7
00:00:40,240 --> 00:00:41,530
from left to right.

8
00:00:41,530 --> 00:00:50,750
So this is the direction of flow a flow line is used to connect symbols and indicate the flow of logic

9
00:00:52,760 --> 00:00:55,290
while the second symbol is a terminal.

10
00:00:55,340 --> 00:00:58,820
As you can see this is a terminal.

11
00:00:58,820 --> 00:01:08,210
It's used to represent the beginning or soft and or the end of a task.

12
00:01:08,210 --> 00:01:15,860
So at the beginning of a task and at the end of that task you have to add this element and usually you

13
00:01:15,860 --> 00:01:17,120
will use them to solve.

14
00:01:17,120 --> 00:01:24,860
And in these tasks to indicate the start and end of these tasks we are going to see this in examples

15
00:01:25,270 --> 00:01:32,640
in the next section this symbol is used for input and output.

16
00:01:32,890 --> 00:01:40,910
It's mainly used for input and output operations such as reading and displaying values that are to be

17
00:01:40,910 --> 00:01:45,650
read or displayed are described inside this symbol.

18
00:01:45,710 --> 00:01:55,270
We are all going to write things here inside it to describe the data that we are going to read or simply.

19
00:01:55,470 --> 00:01:59,010
Now this is a processing symbol.

20
00:01:59,010 --> 00:02:01,980
It's one of the most commonly used symbols.

21
00:02:02,340 --> 00:02:13,590
It's used for any logic or comparison operations unlike the input output and processing symbols which

22
00:02:13,590 --> 00:02:25,980
have one in three and one exit this symbol is used for arithmetic and data manipulation operations.

23
00:02:25,980 --> 00:02:28,860
The instructions are listed inside this symbol.

24
00:02:28,860 --> 00:02:38,940
So if we are going to make a lot of mythical creation 1 let's say I equals one plus one

25
00:02:41,850 --> 00:02:45,910
this is an operation that can be done inside this symbol it's a rectangle.

26
00:02:46,080 --> 00:02:52,320
While this symbol is used to input and output so form to display a value we can write the Sibley

27
00:02:57,730 --> 00:03:00,860
let's say x x is a variable here.

28
00:03:00,880 --> 00:03:08,320
Now do the fourth or let's say the fifth symbol which which is that position symbol.

29
00:03:08,560 --> 00:03:17,380
It's used for any logic or comparison operations unlike the input output and processing symbols which

30
00:03:17,380 --> 00:03:25,890
have one in three and one exit flow line that decision symbol has one in three and two Exit Passes.

31
00:03:25,900 --> 00:03:30,130
So this terminal has one input and an output.

32
00:03:30,160 --> 00:03:41,610
This one also has one input and one output while this one has one input and two outputs.

33
00:03:41,740 --> 00:03:52,590
This is because this is a decision symbol so it will be either yes or through formal or false.

34
00:03:52,630 --> 00:03:59,530
So if the answer to this question that we are asking side this symbol is like if statement it is yes

35
00:03:59,650 --> 00:04:00,610
it will go here.

36
00:04:00,820 --> 00:04:02,200
If it's no it will go ahead.

37
00:04:03,470 --> 00:04:05,290
That's very simple and straightforward.

38
00:04:06,780 --> 00:04:12,910
Now these are the most commonly used symbols in floor charting.

39
00:04:13,000 --> 00:04:21,200
Now we want to make an example for that decision let's say x above 5.

40
00:04:21,500 --> 00:04:29,660
If yes it will go and execute something if no two will go and let's celebrate the process of input output

41
00:04:30,890 --> 00:04:38,230
and can go here we are going to have to explain this in a practical examples in the next section.

42
00:04:38,230 --> 00:04:40,720
But for now this is all what you need to do.

43
00:04:40,720 --> 00:04:43,360
This is the flow line indicating the flow of logic.

44
00:04:43,360 --> 00:04:45,820
This is false start and end of the task.

45
00:04:45,850 --> 00:04:48,640
This is to take inputs and simply outputs.

46
00:04:48,640 --> 00:04:53,630
This is for processing and this is for decision making.

47
00:04:53,710 --> 00:04:58,030
Let's move on to the next symbols.

48
00:04:58,030 --> 00:05:05,620
This circular symbol is a connector a connector is used to join different flow lines.

49
00:05:05,620 --> 00:05:14,050
So if we have four lines coming here and a flow line coming here along coming here we can join them

50
00:05:14,050 --> 00:05:21,200
using this connector symbol the next symbol is an off page connector.

51
00:05:21,490 --> 00:05:31,150
This symbol can be used when you have a very low flow chart and you are out of room in your page and

52
00:05:31,150 --> 00:05:37,660
you have to continue another page you must endure a first page flow line with this symbol.

53
00:05:37,660 --> 00:05:45,550
So it's used to indicate that the flow chart continues to a second page.

54
00:05:45,560 --> 00:05:50,840
Now let's move on to the predefined process symbol.

55
00:05:50,840 --> 00:05:59,480
As you can see it's a rectangle with two lines here and here it's used to represent a group of statements

56
00:05:59,510 --> 00:06:02,630
that perform one processing task.

57
00:06:02,720 --> 00:06:06,980
So it's like functions and programming.

58
00:06:06,980 --> 00:06:13,220
You can add multiple statement inside it and you can call them using this symbol predefined process

59
00:06:14,650 --> 00:06:22,240
the last symbol is annotation as you can see this symbol is used to provide additional information about

60
00:06:22,300 --> 00:06:24,480
another flowchart symbol.

61
00:06:24,610 --> 00:06:34,400
Let's say that we are here and we added X we can add the notation symbol here and say X is the temperature

62
00:06:34,820 --> 00:06:35,540
as example

63
00:06:41,170 --> 00:06:47,980
this is how we can use annotation to add information about other flow symbol.

64
00:06:48,040 --> 00:06:56,740
These are the main components of any flow chart thing and you have to know all of them because we are

65
00:06:56,740 --> 00:06:59,890
going to use them in the practical section.

66
00:06:59,890 --> 00:07:07,630
So I prefer that you take a paper pen on paper and write them down right what each of these means so

67
00:07:07,630 --> 00:07:12,820
that you can know what we are talking about in the practical example section.

68
00:07:12,880 --> 00:07:18,300
Let's take a quick look at all of them flow line to indicate the flow of logic.

69
00:07:18,370 --> 00:07:21,620
Terminal 4 start and end of a task.

70
00:07:21,670 --> 00:07:28,270
This is for input and output to the Sibley outputs and to take inputs.

71
00:07:28,270 --> 00:07:31,930
This is for processing for athletic operations.

72
00:07:31,930 --> 00:07:40,720
This is if you have a decision such as if statement and programming this to join multiple flow lines

73
00:07:40,930 --> 00:07:46,400
this to indicate that the flow chart continues in a second page.

74
00:07:46,480 --> 00:07:56,020
This is a pre-defined process symbol to enable you to add multiple tasks in one location and call it

75
00:07:56,020 --> 00:07:58,380
would evolve or whatever you want.

76
00:07:58,390 --> 00:08:04,940
This is a notation to this would be information about another flow chart symbol.

77
00:08:05,020 --> 00:08:08,220
I hope that you understand these symbols.

78
00:08:08,230 --> 00:08:13,050
If you have any question about any of them please ask and that you aren't able.

79
00:08:13,120 --> 00:08:15,280
Thanks for watching this lesson.

80
00:08:15,280 --> 00:08:16,540
See you next.

81
00:08:16,570 --> 00:08:18,480
This is coding Academy.
