1
00:00:11,540 --> 00:00:15,900
Hello, welcome to the world of computer aided design using solid.

2
00:00:16,960 --> 00:00:23,010
In today's session, you are going to learn how to enter the sketching environment in solid roots.

3
00:00:23,580 --> 00:00:24,940
Enter the sketching environment.

4
00:00:25,300 --> 00:00:27,490
Let us first start a pop document.

5
00:00:28,150 --> 00:00:29,170
Go to the file menu.

6
00:00:30,220 --> 00:00:34,570
When you click on this file option here in the menu bar, could menu will be displayed.

7
00:00:35,080 --> 00:00:37,220
Choose the new option from the shortcut menu.

8
00:00:38,920 --> 00:00:45,670
You will get this new SolidWorks document that across with the bot actually in here as the blocked app

9
00:00:45,670 --> 00:00:46,390
is chosen.

10
00:00:47,110 --> 00:00:47,650
I had to.

11
00:00:47,810 --> 00:00:47,970
Okay.

12
00:00:48,060 --> 00:00:52,930
But you can see we are in the park mauling environment of solid.

13
00:00:54,250 --> 00:00:59,760
So whenever you start a new park, Documentum, by default, you are in the park malling in landmen.

14
00:01:01,180 --> 00:01:07,390
But you need to start the design by first creating the sketch of the base feature in the sketching environment.

15
00:01:08,050 --> 00:01:13,630
So to invoke the sketching environment, she was the sketch stap from the command manager.

16
00:01:14,350 --> 00:01:18,100
Next click on the sketch tool which is available here.

17
00:01:18,370 --> 00:01:20,800
And the extreme left corner of this command managed.

18
00:01:21,970 --> 00:01:27,490
As you click on the sketch too, you can see we have this edit sketch property manager here.

19
00:01:28,330 --> 00:01:36,650
Also, the 3D default plane's front plane, top and plate are temporarily displayed on the screen.

20
00:01:37,790 --> 00:01:43,940
If you see here in the edit sketch, property manager, you are prompted to select a plane on which

21
00:01:44,060 --> 00:01:45,800
to create a sketch for the entity.

22
00:01:46,610 --> 00:01:53,180
So depending on the base feature we are creating, we need to select the plane on which we want to create

23
00:01:53,180 --> 00:01:53,810
the sketch.

24
00:01:54,200 --> 00:01:57,280
Suppose I want to create the sketch on the topline.

25
00:01:57,650 --> 00:02:02,270
So what I do is I choose this top plane here by clicking on it.

26
00:02:03,360 --> 00:02:09,960
As soon as you select a plane, the command manager, when displayed with your sketching tools to draw

27
00:02:09,960 --> 00:02:10,590
the sketch.

28
00:02:11,310 --> 00:02:13,570
Now suppose I want to create a cylinder.

29
00:02:13,980 --> 00:02:21,000
So I'm going to use this sucker tool to create the basic sketch for the model, which is a cylinder.

30
00:02:21,610 --> 00:02:23,160
So I click on the circle to.

31
00:02:24,430 --> 00:02:27,800
You can see the circle property manager is displayed here.

32
00:02:28,400 --> 00:02:32,440
So I will create this circle with center point at the orders.

33
00:02:33,520 --> 00:02:37,550
Click here for the center point and I'll create the circle like this.

34
00:02:38,420 --> 00:02:42,470
You'll see the radius value for this circle is 41 units.

35
00:02:42,620 --> 00:02:46,800
I change it to 50 units and then I will choose this.

36
00:02:46,910 --> 00:02:47,110
Okay.

37
00:02:47,150 --> 00:02:51,110
But you can see the sketch for the base feature is created here.

38
00:02:51,610 --> 00:02:59,090
Now, after creating the sketch, we need to exit the sketching environment and get back into the pot

39
00:02:59,090 --> 00:02:59,840
modeling environment.

40
00:03:00,770 --> 00:03:05,750
We can add material to this basic sketch and convert it into a cylinder.

41
00:03:06,260 --> 00:03:11,460
So I will click on this exact sketch tool here to get out of the sketching environment.

42
00:03:12,320 --> 00:03:12,830
Click on it.

43
00:03:14,030 --> 00:03:16,550
Now we are back into the pot modeling environment.

44
00:03:17,010 --> 00:03:21,760
Click on this feature stop and the command manager in the feature stop.

45
00:03:22,040 --> 00:03:29,090
You'll get all the tools that are required to create a park model as we want to create a cylinder.

46
00:03:29,360 --> 00:03:32,510
So I have to choose this extrude it was based to.

47
00:03:33,440 --> 00:03:36,970
So click on it, you can see was extrude.

48
00:03:37,480 --> 00:03:43,120
Property manager is displayed here and material is added to the base sketch.

49
00:03:43,780 --> 00:03:48,730
Now we need to enter the height up to which we want to extrude this cylinder.

50
00:03:49,360 --> 00:03:50,620
Currently, the value is ten.

51
00:03:50,940 --> 00:03:51,500
I'll change it.

52
00:03:51,790 --> 00:03:58,700
Two hundred anywhere in the property manager and then choose to Okimoto.

53
00:04:00,370 --> 00:04:06,310
You can see we have reached a cylinder, which is having a height of hundred units.

54
00:04:06,790 --> 00:04:12,700
So this is how we create sketches in the sketching environment of solid books so that we can use those

55
00:04:12,700 --> 00:04:14,890
sketches to create 3-D models.

56
00:04:15,340 --> 00:04:16,650
Thank you for watching this video.
