1
00:00:12,840 --> 00:00:16,100
Welcome to the world of computer aided design with solid books.

2
00:00:16,530 --> 00:00:17,340
Today's session.

3
00:00:17,730 --> 00:00:20,910
We are going to learn how to create different types of apps.

4
00:00:21,210 --> 00:00:22,000
And SolidWorks.

5
00:00:22,210 --> 00:00:26,610
You're already in the sketching environment and we have the sketch tools available here.

6
00:00:27,800 --> 00:00:29,610
Here we have this up drop down.

7
00:00:30,240 --> 00:00:34,890
If I click on this town, Metro can see we have three tools available here.

8
00:00:35,880 --> 00:00:39,840
Centerpoint op2 tangent up to three point two.

9
00:00:40,190 --> 00:00:43,670
I'll click on the centerpoint octal first click on the stool.

10
00:00:44,030 --> 00:00:48,990
You can see the property manager is invoked here in the Updyke area.

11
00:00:49,500 --> 00:00:50,530
We have this centrepoint.

12
00:00:50,670 --> 00:00:52,060
OK, duelled selected.

13
00:00:52,070 --> 00:00:54,700
You are the two tools available in this area.

14
00:00:55,220 --> 00:01:00,410
And just off two and three point two which are also available here in the dropdown.

15
00:01:02,190 --> 00:01:07,000
So we can use all of these three tools using this off property manager.

16
00:01:07,360 --> 00:01:09,760
Currently, the Centerpoint, our tool is chosen here.

17
00:01:10,090 --> 00:01:14,580
So I will click here on the screen, specified the center point for the arc.

18
00:01:15,980 --> 00:01:18,990
Next, we need to specify the two end point so far.

19
00:01:19,890 --> 00:01:21,810
Click here for the start point of the arc.

20
00:01:22,330 --> 00:01:24,260
And this is the end point of the arc.

21
00:01:24,640 --> 00:01:29,170
You can see here in the barometer's area radius of this office.

22
00:01:29,200 --> 00:01:30,270
132 units.

23
00:01:30,810 --> 00:01:31,560
Let's change it.

24
00:01:31,620 --> 00:01:32,620
Two hundred units.

25
00:01:33,390 --> 00:01:39,220
And the angle subtenant by this OK is one thirty seven point two nine degrees in the options area.

26
00:01:39,310 --> 00:01:42,000
We have this for construction checkbox here.

27
00:01:42,390 --> 00:01:44,110
I select this checkbox in.

28
00:01:44,110 --> 00:01:47,020
See, the arc has changed into a construction element.

29
00:01:47,800 --> 00:01:53,860
We can also fix the location of this up by clicking on this fixed button available here in the ad relations

30
00:01:53,950 --> 00:01:54,280
area.

31
00:01:55,300 --> 00:01:56,470
Click on this fixed button.

32
00:01:57,340 --> 00:02:02,650
Now, the location of this, OK, is fixed as we have applied a fixed constraint to it.

33
00:02:03,010 --> 00:02:07,660
Also, after applying the fixed constraint we can see in the existing relations.

34
00:02:07,780 --> 00:02:08,440
This works.

35
00:02:08,890 --> 00:02:11,040
This fixed constraint is added up here.

36
00:02:11,440 --> 00:02:14,540
So it can option available in the OP type area is tangent.

37
00:02:14,590 --> 00:02:14,910
OK.

38
00:02:15,220 --> 00:02:16,120
Use this option.

39
00:02:16,240 --> 00:02:17,330
I'll create a Lenfest.

40
00:02:17,650 --> 00:02:20,640
I'll click on this close data button to get out of the OP2.

41
00:02:22,310 --> 00:02:23,620
I did select the line to.

42
00:02:25,350 --> 00:02:26,690
This is the line segment.

43
00:02:28,590 --> 00:02:35,760
Again, click on this op tool, and this time I'm going to use an agent, OK, option from this opti

44
00:02:35,760 --> 00:02:36,150
period.

45
00:02:36,840 --> 00:02:37,300
I want to.

46
00:02:37,390 --> 00:02:39,180
OK to be tangent to this line segment.

47
00:02:39,630 --> 00:02:41,860
So I'll click here for the first point of dog.

48
00:02:42,300 --> 00:02:44,650
Next, I need to specify the second point.

49
00:02:45,120 --> 00:02:47,100
So I would click here for the second point.

50
00:02:47,340 --> 00:02:50,460
Likewise, you can keep on creating these and your docs.

51
00:02:55,890 --> 00:02:58,890
Third option in this Updyke area is three point duck.

52
00:02:59,560 --> 00:03:00,240
Click on it.

53
00:03:02,340 --> 00:03:06,800
Now, I need to specify the three points along the circumference of this, OK, so this is the first

54
00:03:06,800 --> 00:03:07,250
point.

55
00:03:09,130 --> 00:03:14,620
This is the second point, and this is the third formed after creating these three types of.

56
00:03:15,200 --> 00:03:18,730
I'm going to click on this close dialogue button to get out of the OP2.

57
00:03:19,270 --> 00:03:20,430
Thank you for watching this reading.
